[git pull] drm v2.6.31 merge (part 1)
From: Dave Airlie
Date: Fri Jun 12 2009 - 02:28:37 EST
Hi Linus,
Please pull the 'drm-linus' branch from
ssh://master.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git drm-linus
This contains the Intel tree merge (merged properly I haven't rebased or
touched it), which contains numerous GEM bugfixes + support for a new
chipset. AMD patches for new r600 chipset support. A more flexible drm
debugging system to decrease the firehose effect enabling drm debugging
has, it also contains some paving the way patches for part 2 of the merge.
It also contains one AGP patch for supporting those new chips, and a PNP
patch to add a new interface that intel kms relies on now, all the
signoffs for the pnp code should be correct.
Part 2 will contains an initial radeon KMS driver and the TTM memory
manager, its quite large so I don't want to include it all in this pull.
The initial radeon KMS code enable switch will hide under staging for now
for one driver release while we stabilise it in-tree, its not in a bad
state but its a lot of new code and we'd hate for anyone to fall over it
my accident. Its quite well separated from the old radeon code so
shouldn't fall over too much. I'll send the part 2 pull early next week.
Dave.
drivers/char/agp/intel-agp.c | 16 +-
drivers/gpu/drm/drm_bufs.c | 3 +-
drivers/gpu/drm/drm_edid.c | 74 +----
drivers/gpu/drm/drm_gem.c | 2 +-
drivers/gpu/drm/drm_hashtab.c | 4 +
drivers/gpu/drm/drm_mm.c | 165 +++++++--
drivers/gpu/drm/drm_modes.c | 18 +-
drivers/gpu/drm/drm_stub.c | 15 +
drivers/gpu/drm/i915/i915_dma.c | 67 ++--
drivers/gpu/drm/i915/i915_drv.h | 48 ++-
drivers/gpu/drm/i915/i915_gem.c | 156 ++++++---
drivers/gpu/drm/i915/i915_gem_tiling.c | 152 ++++++++
drivers/gpu/drm/i915/i915_irq.c | 190 +++++++++-
drivers/gpu/drm/i915/i915_reg.h | 616 ++++++++++++++++++++++++++++++-
drivers/gpu/drm/i915/i915_suspend.c | 20 +
drivers/gpu/drm/i915/intel_bios.c | 86 +++++-
drivers/gpu/drm/i915/intel_bios.h | 101 +++++-
drivers/gpu/drm/i915/intel_crt.c | 76 ++++-
drivers/gpu/drm/i915/intel_display.c | 645 ++++++++++++++++++++++++++++++--
drivers/gpu/drm/i915/intel_fb.c | 26 +-
drivers/gpu/drm/i915/intel_hdmi.c | 33 ++-
drivers/gpu/drm/i915/intel_lvds.c | 151 ++++++--
drivers/gpu/drm/i915/intel_sdvo.c | 110 ++++--
drivers/gpu/drm/i915/intel_tv.c | 3 +
drivers/gpu/drm/radeon/r600_cp.c | 42 ++-
drivers/gpu/drm/radeon/radeon_cp.c | 2 +-
drivers/gpu/drm/radeon/radeon_drv.h | 1 +
drivers/gpu/drm/via/via_dmablit.c | 6 +-
drivers/pnp/resource.c | 18 +
include/drm/drmP.h | 126 ++++---
include/drm/drm_hashtab.h | 2 +
include/drm/drm_mm.h | 90 +++++
include/drm/drm_pciids.h | 9 +
include/linux/pnp.h | 2 +
34 files changed, 2677 insertions(+), 398 deletions(-)
create mode 100644 include/drm/drm_mm.h
commit 3c24475c1e4e8d10e50df161d8c4f1d382997a7c
Author: Jerome Glisse <glisse@xxxxxxxxxxxxxxx>
Date: Wed Apr 8 18:34:28 2009 +0200
drm: include kernel list header file in hashtab header
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit f2cb5d86e1af175a9b210241800f03a447f92621
Author: Jerome Glisse <glisse@xxxxxxxxxxxxxxx>
Date: Wed Apr 8 17:16:24 2009 +0200
drm: Export hash table functionality.
add exports so TTM module can use these functions.
Signed-off-by: Thomas Hellstrom <thellstrom@xxxxxxxxxx>
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit 249d6048ca98b5452105b0824abac1275661b8e3
Author: Jerome Glisse <glisse@xxxxxxxxxxxxxxx>
Date: Wed Apr 8 17:11:16 2009 +0200
drm: Split out the mm declarations in a separate header. Add atomic operations.
this is a TTM preparation patch, it rearranges the mm and
add operations needed to do mm operations in atomic context.
Signed-off-by: Thomas Hellstrom <thellstrom@xxxxxxxxxx>
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit 715cbb05c935e8a4306a730d14a72d5af881523e
Author: Alex Deucher <alexdeucher@xxxxxxxxx>
Date: Fri Jun 12 15:55:44 2009 +1000
drm/radeon: add support for RV790.
This adds the PCI IDs for the rv790 which are equiv to the rv770.
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit 2a71ebcd85bcc4d6607f577f23a491f796c30e82
Author: Alex Deucher <alexdeucher@xxxxxxxxx>
Date: Fri Jun 12 15:53:10 2009 +1000
drm/radeon: add rv740 drm support.
This adds drm support for the RV740 family of chips to the r600 support code.
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit fbe0efb869efde8d847ede3a925230ef88910086
Author: Kristian Høgsberg <krh@xxxxxxxxxx>
Date: Tue Jun 9 01:50:41 2009 +1000
drm_calloc_large: check right size, check integer overflow, use GFP_ZERO
Previously we would check size instead of size * nmemb, and so would
never hit the vmalloc path. Also add integer overflow check as in kcalloc,
and allocate GFP_ZERO pages instead of memset()ing them.
Signed-off-by: Kristian Høgsberg <krh@xxxxxxxxxx>
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit 61f11699e7a92d932b31ded3715ad4f70eb26ef2
Author: Keith Packard <keithp@xxxxxxxxxx>
Date: Sat May 30 20:42:27 2009 -0700
drm: Eliminate magic I2C frobbing when reading EDID
This code depends on the underlying I2C adapter using the bit-banging algo,
which may not be the case. If specific encoders require this mechanism, they
should build a custom I2C algo that implements this workaround, rather than
having it in the general path.
Signed-off-by: Keith Packard <keithp@xxxxxxxxxx>
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit 7ff145593d808a371924652c8d6a15fb75ce2250
Author: Dave Airlie <airlied@xxxxxxxx>
Date: Wed Apr 22 18:52:14 2009 +1000
drm/i915: duplicate desired mode for use by fbcon.
duplicate the mode into fbcon storage, so when we free modes later
we don't just lose this.
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit c5c07550d41abe86d109430e718f2007113031f8
Author: Figo.zhang <figo1802@xxxxxxxxx>
Date: Sat Jun 6 18:26:26 2009 +0800
drm/via: vfree() no need checking before calling it
vfree() does it's own NULL checking, no need for explicit check before
calling it.
Signed-off-by: Figo.zhang <figo1802@xxxxxxxxx>
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit be25ed9c5cc06e1d17aa97e41daf88f0b46143e6
Author: yakui_zhao <yakui.zhao@xxxxxxxxx>
Date: Tue Jun 2 14:13:55 2009 +0800
drm: Replace DRM_DEBUG with DRM_DEBUG_DRIVER in i915 driver
Replace the DRM_DEBUG with the DRM_DEBUG_DRIVER to print the debug info
in i915 driver.
Signed-off-by: Zhao Yakui <yakui.zhao@xxxxxxxxx>
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit f053185948a1bd16329433f5371809765086c1ec
Author: yakui_zhao <yakui.zhao@xxxxxxxxx>
Date: Tue Jun 2 14:12:47 2009 +0800
drm: Replace DRM_DEBUG with DRM_DEBUG_MODE in drm_mode
Replace the DRM_DEBUG with DRM_DEBUG_MODE macro to print the info in drm_mode.
airlied:- fixed up to remove a conflicting #define
Signed-off-by: Zhao Yakui <yakui.zhao@xxxxxxxxx>
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit 342dc382c451f75ea202a65e6f529bdff6d184cd
Author: yakui_zhao <yakui.zhao@xxxxxxxxx>
Date: Tue Jun 2 14:12:00 2009 +0800
drm/i915: Replace DRM_DEBUG with DRM_DEBUG_KMS in intel_sdvo
Use the DRM_DEBUG_KMS/DEBUG_LOG_KMS to print the debug info for
SDVO device.
Signed-off-by: Zhao Yakui <yakui.zhao@xxxxxxxxx>
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit 7fb85bfb54a64e9dd82ee4a79022c38ab58f21a0
Author: yakui_zhao <yakui.zhao@xxxxxxxxx>
Date: Tue Jun 2 14:10:49 2009 +0800
drm/i915: replace DRM_DEBUG with DRM_DEBUG_KMS in intel_lvds
Use the DRM_DEBUG_KMS macro definition to print the debug info for
the LVDS.
Signed-off-by: Zhao Yakui <yakui.zhao@xxxxxxxxx>
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit 4fefcb27050b98c97b1c32bc710fc2f874449dee
Author: yakui_zhao <yakui.zhao@xxxxxxxxx>
Date: Tue Jun 2 14:09:47 2009 +0800
drm: add separate drm debugging levels
Now all the DRM debug info will be reported if the boot option of
"drm.debug=1" is added. Sometimes it is inconvenient to get the debug
info in KMS mode. We will get too much unrelated info.
This will separate several DRM debug levels and the debug level can be used
to print the different debug info. And the debug level is controlled by the
module parameter of drm.debug
In this patch it is divided into four debug levels;
drm_core, drm_driver, drm_kms, drm_mode.
At the same time we can get the different debug info by changing the debug
level. This can be done by adding the module parameter. Of course it can
be changed through the /sys/module/drm/parameters/debug after the system is
booted.
Four debug macro definitions are provided.
DRM_DEBUG(fmt, args...)
DRM_DEBUG_DRIVER(prefix, fmt, args...)
DRM_DEBUG_KMS(prefix, fmt, args...)
DRM_DEBUG_MODE(prefix, fmt, args...)
When the boot option of "drm.debug=4" is added, it will print the debug info
using DRM_DEBUG_KMS macro definition.
When the boot option of "drm.debug=6" is added, it will print the debug info
using DRM_DEBUG_KMS/DRM_DEBUG_DRIVER.
Sometimes we expect to print the value of an array.
For example: SDVO command,
In such case the following four DRM debug macro definitions are added:
DRM_LOG(fmt, args...)
DRM_LOG_DRIVER(fmt, args...)
DRM_LOG_KMS(fmt, args...)
DRM_LOG_MODE(fmt, args...)
Signed-off-by: Zhao Yakui <yakui.zhao@xxxxxxxxx>
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit df4f7fe7bd516b3833e25c692c3970e22038a6ca
Author: Dave Airlie <airlied@xxxxxxxxxx>
Date: Thu Jun 11 16:16:10 2009 +1000
radeon: remove _DRM_DRIVER from the preadded sarea map
This shouldn't be there and is what broke r600 late in the 2.6.30
release cycle with Ben's patch.
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit 2ff2e8a3e1898e692b604424c384f134009dea80
Author: Ben Skeggs <bskeggs@xxxxxxxxxx>
Date: Tue May 26 10:35:52 2009 +1000
drm: don't associate _DRM_DRIVER maps with a master
A driver will use the _DRM_DRIVER map flag to indicate that it wants
to be responsible for removing the map itself, bypassing the DRM's
automagic cleanup code.
Since the multi-master changes this has been broken, resulting in some
drivers having their registers unmapped before it's finished with them.
Signed-off-by: Ben Skeggs <bskeggs@xxxxxxxxxx>
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit b798b1fe3b6436275ad1b517a6823d55e3b75c22
Author: Robert P. J. Day <rpjday@xxxxxxxxxxxxxx>
Date: Wed Jun 10 12:43:49 2009 -0700
drm: simplify kcalloc() call to kzalloc().
Calls to kcalloc() for a single element can be simplified to calls to
kzalloc().
Signed-off-by: Robert P. J. Day <rpjday@xxxxxxxxxxxxxx>
Cc: Dave Airlie <airlied@xxxxxxxx>
Cc: Eric Anholt <eric@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit 1bcbf3948876e31a8ece28597dec447611ad9c8b
Author: Pavel Roskin <proski@xxxxxxx>
Date: Wed Jun 10 12:43:48 2009 -0700
intelfb: fix spelling of "CLOCK"
Signed-off-by: Pavel Roskin <proski@xxxxxxx>
Cc: Eric Anholt <eric@xxxxxxxxxx>
Cc: Dave Airlie <airlied@xxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit dcae3626d031fe6296b1e96a16f986193a41f840
Author: Roel Kluin <roel.kluin@xxxxxxxxx>
Date: Wed Jun 10 12:43:48 2009 -0700
drm: fix LOCK_TEST_WITH_RETURN macro
When this macro isn't called with 'file_priv' this will result in a build
failure.
Signed-off-by: Roel Kluin <roel.kluin@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Dave Airlie <airlied@xxxxxxxxxx>
commit 03d6069912babc07a3da20e715dd6a5dc8f0f867
Author: Keith Packard <keithp@xxxxxxxxxx>
Date: Fri Jun 5 18:19:56 2009 -0700
drm/i915: Hook connector to encoder during load detection (fixes tv/vga detect)
With the DRM-driven DPMS code, encoders are considered idle unless a
connector is hooked to them, so mode setting is skipped. This makes load
detection fail as none of the hardware is enabled.
Signed-off-by: Keith Packard <keithp@xxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 2939e1f5331455d17a4a704dd6210e1474002545
Author: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Date: Sat Jun 6 09:46:03 2009 +0100
drm/i915: NOMEM->NOSPC
To differentiate between encountering an out-of-memory error with running
out of space in the aperture, use ENOSPC for the later.
Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 21d509e339565c82887733c02465bb7f5866c8f5
Author: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Date: Sat Jun 6 09:46:02 2009 +0100
drm/i915: use I915_GEM_GPU_DOMAINS
Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit b1ce786cb85280490ca3c29a62ddf8608826b414
Author: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Date: Sat Jun 6 09:46:00 2009 +0100
drm/i915: no need to hold mutex for object lookup
Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 1f803ee5cea67d2387aeedb4b07e645a743729de
Author: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Date: Sat Jun 6 09:45:59 2009 +0100
drm/i915: Call drm_vblank_post_modeset() on error paths.
Ensure that the drm_vblank_pre_modeset() is always balanced by
drm_vblank_post_modeset() within intel_crtc_mode_set().
Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 5f26a2c7ad6eba97141e8372f3def282f934b169
Author: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Date: Sat Jun 6 09:45:58 2009 +0100
drm/i915: OR in the COMMAND read domain for the batch buffer.
The batch buffer may be shared with another read buffer, so we should not
ignore any previously set domains, but just or in the command domain (and
check that the buffer is not writable).
Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 83d60795157c83389e6aaa0532d5e19afa976a24
Author: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Date: Sat Jun 6 09:45:57 2009 +0100
drm/i915: Sanity check execbuffer arguments before touching state.
By sending a broken execbuffer (its length was not suitably aligned) I
triggered an operation upon a freed object. The invalid alignment was
discovered after updating the write_domain on the object but before the
object was placed on the active queue. So during the unwind process
following the error, the now freed object attempts to flush its
non-existent, but outstanding, GPU writes causing this use-after-free.
[drm:i915_dispatch_gem_execbuffer] *ERROR* alignment
[drm:i915_gem_execbuffer] *ERROR* dispatch failed -22
WARNING: at lib/kref.c:43 warn_slowpath_null+0x10/0x15()
Modules linked in:
Pid: 4552, comm: lt-csi-drm Not tainted 2.6.30-rc6 #423
Call Trace:
[<c0119ef3>] warn_slowpath_fmt+0x57/0x6d
[<c014de24>] ? get_pageblock_migratetype+0x18/0x1e
[<c014e8fd>] ? free_hot_page+0xa/0xc
[<c014e915>] ? __free_pages+0x16/0x1f
[<c0153ebf>] ? shmem_truncate_range+0x63e/0x656
[<c015fb2f>] ? slob_page_alloc+0x146/0x1c8
[<c0119f19>] warn_slowpath_null+0x10/0x15
[<c01f55f2>] kref_get+0x1b/0x21
[<c02605db>] i915_gem_object_move_to_active+0x1f/0x56
[<c0261302>] i915_add_request+0x156/0x19a
[<c026136e>] i915_gem_object_flush_gpu_write_domain+0x28/0x3f
[<c0261eca>] i915_gem_object_unbind+0x4a/0x124
[<c0261fd7>] i915_gem_free_object+0x33/0x9b
[<c0250d6b>] drm_gem_object_free+0x28/0x4a
[<c0250d43>] ? drm_gem_object_free+0x0/0x4a
[<c01f55ce>] kref_put+0x38/0x41
[<c0250cbf>] drm_gem_object_unreference+0x11/0x13
[<c0250d06>] drm_gem_object_handle_unreference+0x1e/0x21
[<c0250d13>] drm_gem_object_release_handle+0xa/0xe
[<c01f3e6b>] idr_for_each+0x5f/0x98
[<c0250d09>] ? drm_gem_object_release_handle+0x0/0xe
[<c0250daf>] drm_gem_release+0x22/0x34
[<c025046f>] drm_release+0x1e8/0x3c4
[<c0162d25>] __fput+0xaf/0x146
[<c0162dce>] fput+0x12/0x14
[<c01605ef>] filp_close+0x48/0x52
[<c011b182>] put_files_struct+0x57/0x9b
[<c011b1e4>] exit_files+0x1e/0x20
[<c011c6b6>] do_exit+0x16d/0x511
[<c03704ab>] ? __schedule+0x3d4/0x3e5
[<c0103f0d>] ? handle_irq+0xd/0x69
[<c011caa7>] do_group_exit+0x4d/0x73
[<c011cae0>] sys_exit_group+0x13/0x17
[<c010268c>] sysenter_do_call+0x12/0x2b
Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit fa0864b26b4bfa1dd4bb78eeffbc1f398cb56425
Author: Michael Cousin <mika.cousin@xxxxxxxxx>
Date: Fri Jun 5 21:16:22 2009 +0200
drm/i915: Skip lvds with Aopen i945GTt-VFA
Signed-off-by: Michael Cousin <mika.cousin@xxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 80a538e49daddbf3bf783f3464e91bd3181957b2
Author: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Date: Mon Jun 8 14:40:20 2009 +0800
drm/i915: Enable probe on new chipset
Signed-off-by: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 036a4a7d9272582fc7370359515d807393e2f728
Author: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Date: Mon Jun 8 14:40:19 2009 +0800
drm/i915: handle interrupt on new chipset
Update interrupt handling methods for IGDNG with new registers
for display and graphics interrupt functions. As we won't use
irq-based vblank sync in dri2, so display interrupt on new chip
will be used for hotplug only in future.
Signed-off-by: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit d765898970f35acef960581f678b9da9d5c779fa
Author: Jesse Barnes <jbarnes at virtuousgeek.org>
Date: Fri Jun 5 14:41:29 2009 +0000
drm/i915: enable MCHBAR if needed
Using the new PNP resource checking code, this patch allows the i915
driver to allocate MCHBAR space if needed and use the BAR to determine
current memory settings.
[apw@xxxxxxxxxxxxx: moved to the new generic PNP resource interface]
Signed-off-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
Signed-off-by: Andy Whitcroft <apw@xxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
failure to update-index after git-am --reject to hand-apply
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 1b8e69662e1a086878bf930a6042daf7f8a076cc
Author: Bjorn Helgaas <bjorn.helgaas at hp.com>
Date: Fri Jun 5 14:37:23 2009 +0000
pnp: add PNP resource range checking function
Add a PNP resource range check function, indicating whether a resource
has been assigned to any device.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
[apw@xxxxxxxxxxxxx: fixed up exports et al]
Signed-off-by: Andy Whitcroft <apw@xxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit b66d18ddb16603d1e1ec39cb2ff3abf3fd212180
Author: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
Date: Fri May 15 14:11:48 2009 -0700
drm/i915: avoid non-atomic sysrq execution
The sysrq functions are executed in hardirq context, so we shouldn't be
calling sleeping functions from them, like mutex_locks or memory
allocations.
Fix up the i915 sysrq handler to avoid this.
Signed-off-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 42c2798b35b95c471877133e19ccc3cab00e9b65
Author: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
Date: Tue May 5 13:13:16 2009 -0700
drm/i915: apply G45 vblank count code to all G4x chips and fix max_frame_count
All G4x and newer chips use the new style frame count register, with a
full 32 bit frame count. Update the code to reflect this.
Signed-off-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 70aa96ca2d8d938fc036ef8fd189b0151f4fc3ba
Author: Jarod Wilson <jarod@xxxxxxxxxx>
Date: Wed May 27 17:20:39 2009 -0400
drm/i915: add ignore lvds quirk info for AOpen Mini PC
Fix a FIXME in the intel LVDS bring-up code, adding the appropriate
blacklist entry for the AOpen Mini PC, courtesy of a dmidecode
dump from Florian Demmer.
Signed-off-by: Jarod Wilson <jarod@xxxxxxxxxx>
CC: Florian Demmer <florian@xxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 714605e4a05787c51a5ac36c926d2169cfdfbfba
Author: yakui_zhao <yakui.zhao@xxxxxxxxx>
Date: Sun May 31 17:18:07 2009 +0800
drm/i915: Initialize the SDVO device based on the sdvo info parsed from VBT
http://bugs.freedesktop.org/show_bug.cgi?id=20429
Signed-off-by: Zhao Yakui <yakui.zhao@xxxxxxxxx>
[anholt: Massive cleanup of the slave addr function]
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 9b9d172d06b0f2d51cc9431e2c6c3055f0cf10ef
Author: yakui_zhao <yakui.zhao@xxxxxxxxx>
Date: Sun May 31 17:17:17 2009 +0800
drm/i915: parse VBT general definition block to get the SDVO device info
The general definition block contains the child device tables, which include
the SDVO device info. For example: device slave address, device dvo port,
device type.
We will get the info of SDVO device by parsing the general definition blocks.
Only when a valid slave address is found, it is regarded as the SDVO device.
And the info of DVO port and slave address is recorded.
http://bugs.freedesktop.org/show_bug.cgi?id=20429
Signed-off-by: Zhao Yakui <yakui.zhao@xxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 59a036cfbd29aadf40d2b754cfebee2a96268752
Author: yakui_zhao <yakui.zhao@xxxxxxxxx>
Date: Sun May 31 17:16:22 2009 +0800
drm/i915: Add the structure of child_device_config in video BIOS tables.
Signed-off-by: Zhao Yakui <yakui.zhao@xxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 040d87f15a0129242463d3ed7c48381505f596e2
Author: Keith Packard <keithp@xxxxxxxxxx>
Date: Sat May 30 20:42:33 2009 -0700
drm/i915: Add Display Port register defines
This adds the register definitions for the display port enable register
along with those for the GMCH and Link M/N ratios required to drive display
port outputs.
Signed-off-by: Keith Packard <keithp@xxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 2245fda810f870dce9b030e6aa604320abba53a5
Author: Keith Packard <keithp@xxxxxxxxxx>
Date: Sat May 30 20:42:29 2009 -0700
drm/i915: Don't trim cursor addresses to 11 bits
We can safely assume that cursor addresses will not extend beyond the
addressable screen dimensions; setting the additional bits is harmless in
any case.
Signed-off-by: Keith Packard <keithp@xxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit cb66c692d1ae257f32dc7f6085cf9cb9f2f6bab8
Author: Ma Ling <ling.ma@xxxxxxxxx>
Date: Sun May 31 16:58:32 2009 +0800
drm/i915: Set correct TV detection voltage level override values
We detect TV connect status by setting DAC voltage level override
values as 0.7 voltage for DAC_A/B/C. The corresponding 2-bits shold be 0x2,
In order correctly to set last bit as 0, at first we must clean it.
It fixed freedesktop.org bug #21204
Signed-off-by: Ma Ling <ling.ma@xxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 541998a18b72d2cac48b3369fa4540116ff3f0a8
Author: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Date: Fri Jun 5 15:38:44 2009 +0800
drm/i915: Add LVDS support for IGDNG
Signed-off-by: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 30ad48b7334a2eb2edf22f6c91f7b3f22a22a837
Author: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Date: Fri Jun 5 15:38:43 2009 +0800
drm/i915: Add HDMI support on IGDNG
Signed-off-by: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 2c07245fb8f7f0a282282e5a9747e46defdb2cc7
Author: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Date: Fri Jun 5 15:38:42 2009 +0800
drm/i915: enable kernel modesetting on IGDNG
This adds kernel mode setting on IGDNG with VGA output support.
Note that suspend/resume doesn't work yet.
Signed-off-by: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 2cce0d8740f0d1454d012401257d96c513ce358f
Author: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Date: Fri Jun 5 15:38:41 2009 +0800
drm/i915: Disable tiling on IGDNG for now
Swizzle bit detection not working right on it.
Signed-off-by: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit e170b030dcd6aed11dde2d124c09991ec771f529
Author: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Date: Fri Jun 5 15:38:40 2009 +0800
drm/i915: Disable opregion on IGDNG for now
Disable OpRegion support for now until verified on new chipsets.
Signed-off-by: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit b9055052d3e0388b4a5e8c3e0bbab665c5996f50
Author: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Date: Fri Jun 5 15:38:38 2009 +0800
drm/i915: Add new chipset register definitions
Signed-off-by: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 280da227c870a50f669de0c8d46bfb2c62da9995
Author: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Date: Fri Jun 5 15:38:37 2009 +0800
drm/i915: Add chipset/feature defines for for new chipsets
Signed-off-by: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
[anholt: dropped drm_pciids.h hunk to avoid loading an incomplete driver]
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit 32cb055b57eab803ea82b76dc913b0378e5af145
Author: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Date: Fri Jun 5 15:38:36 2009 +0800
agp/intel: Add support for new chipsets
Both desktop and mobile versions are added.
Signed-off-by: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
commit b962442e46a9340bdbc6711982c59ff0cc2b5afb
Author: Eric Anholt <eric@xxxxxxxxxx>
Date: Wed Jun 3 07:27:35 2009 +0000
drm/i915: Change GEM throttling to be 20ms like the comment says.
keithp didn't like the original 20ms plan because a cooperative client could
be starved by an uncooperative client. There may even have been problems
with cooperative clients versus cooperative clients. So keithp changed
throttle to just wait for the second to last seqno emitted by that client.
It worked well, until we started getting more round-trips to the server
due to DRI2 -- the server throttles in BlockHandler, and so if you did more
than one round trip after finishing your frame, you'd end up unintentionally
syncing to the swap.
Fix this by keeping track of the client's requests, so the client can wait
when it has an outstanding request over 20ms old. This should have
non-starving behavior, good behavior in the presence of restarts, and less
waiting. Improves high-settings openarena performance on my GM45 by 50%.
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
Reviewed-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
commit 1fd1c624362819ecc36db2458c6a972c48ae92d6
Author: Eric Anholt <eric@xxxxxxxxxx>
Date: Wed Jun 3 07:26:58 2009 +0000
drm/i915: Save/restore cursor state on suspend/resume.
This may fix cursor corruption in X on resume, which would persist until
the cursor was hidden and then shown again.
V2: Also include the cursor control regs.
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
Reviewed-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
commit 0e7ddf7eeeef5aea85412120539ab5369577faeb
Author: Eric Anholt <eric@xxxxxxxxxx>
Date: Thu Jun 4 11:18:14 2009 +0000
drm/i915: Remove a bad BUG_ON in the fence management code.
This could be triggered by a gtt mapping fault on 965 that decides to
remove the fence from another object that happens to be active currently.
Since the other object doesn't rely on the fence reg for its execution, we
don't wait for it to finish. We'll soon be not waiting on 915 most of the
time as well, so just drop the BUG_ON.
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>