Re: linux-next end of partition problems?

From: Jeff Moyer
Date: Thu Jun 04 2009 - 17:20:49 EST


Jens Axboe <jens.axboe@xxxxxxxxxx> writes:

> On Thu, Jun 04 2009, Jeff Moyer wrote:
>> "Luck, Tony" <tony.luck@xxxxxxxxx> writes:
>>
>> >> What kind of controller/drive is this?
>> >
>> > lspci says the controller is:
>> > 06:02.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
>> >
>> > console log says drive is:
>> > scsi 0:0:1:0: Direct-Access SEAGATE ST318406LC 010A PQ: 0 ANSI: 3
>> > target0:0:1: Beginning Domain Validation
>> > target0:0:1: Ending Domain Validation
>> > target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
>> > sd 0:0:1:0: [sdb] 35843670 512-byte hardware sectors: (18.3 GB/17.0 GiB)
>> > sd 0:0:1:0: [sdb] Write Protect is off
>> > sd 0:0:1:0: [sdb] Mode Sense: 9f 00 10 08
>> > scsi 0:0:6:0: Processor ESG-SHV SCA HSBP M17 1.0D PQ: 0 ANSI: 2
>> > target0:0:6: Beginning Domain Validation
>> > sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
>> > target0:0:6: Ending Domain Validation
>> > target0:0:6: asynchronous
>> > sdb: sdb1 sdb2 sdb3
>> > sd 0:0:1:0: [sdb] Attached SCSI disk
>> >
>> > A git bisect between v2.6.30-rc7(good) and next-20090602(bad) points
>> > the finger at this commit (and reverting this change from next-20090602
>> > confirms it introduces this problem):
>> >
>> >
>> > commit db2dbb12dc47a50c7a4c5678f526014063e486f6
>> > Author: Jeff Moyer <jmoyer@xxxxxxxxxx>
>> > Date: Wed Apr 22 14:08:13 2009 +0200
>> >
>> > block: implement blkdev_readpages
>> >
>> > Doing a proper block dev ->readpages() speeds up the crazy dump(8)
>> > approach of using interleaved process IO.
>> >
>> > Signed-off-by: Jeff Moyer <jmoyer@xxxxxxxxxx>
>> > Signed-off-by: Jens Axboe <jens.axboe@xxxxxxxxxx>
>> >
>> > diff --git a/fs/block_dev.c b/fs/block_dev.c
>> > index f45dbc1..a85fe31 100644
>> > --- a/fs/block_dev.c
>> > +++ b/fs/block_dev.c
>> > @@ -331,6 +331,12 @@ static int blkdev_readpage(struct file * file, struct page * page)
>> > return block_read_full_page(page, blkdev_get_block);
>> > }
>> >
>> > +static int blkdev_readpages(struct file *file, struct address_space *mapping,
>> > + struct list_head *pages, unsigned nr_pages)
>> > +{
>> > + return mpage_readpages(mapping, pages, nr_pages, blkdev_get_block);
>> > +}
>> > +
>> > static int blkdev_write_begin(struct file *file, struct address_space *mapping,
>> > loff_t pos, unsigned len, unsigned flags,
>> > struct page **pagep, void **fsdata)
>> > @@ -1399,6 +1405,7 @@ static int blkdev_releasepage(struct page *page, gfp_t wait)
>> >
>> > static const struct address_space_operations def_blk_aops = {
>> > .readpage = blkdev_readpage,
>> > + .readpages = blkdev_readpages,
>> > .writepage = blkdev_writepage,
>> > .sync_page = block_sync_page,
>> > .write_begin = blkdev_write_begin,
>> >
>> >
>> > On a random hunch, I wondered whether this error message was connected to
>> > the fact that ia64 kernel has a 64K page size. I re-built using a 4k
>> > pagesize ... and this also make the partition overrun message go away.
>> >
>> > So is it plausible that the blkdev_readpages() code is resulting in some
>> > readahead of a page that overlaps the partition end? The partition size
>> > (15832057 * 1K block according to /proc/partitions) is not a multiple of
>> > the 64K page size ... but then it isn't a multiple of 4K either :-(
>>
>> Thanks for digging into this, Tony. I'll take a look at it today.
>> Jens, you can feel free to pull this for now. I never did get you real
>> data showing the improvement anyway, so I'll try to do that as well.
>
> OK, I'll revert it for now.

You can keep it reverted... forever and ever. ;-) I'm certain this
patch didn't have a *negative* impact when I sent it to you, but it sure
causes problems now! (That's my story and I'm sticking to it!) Dump is
~48% slower with the patch applied when using deadline, ~25% slower when
using cfq. This testing was done using a 4 disk stripe off of a CCISS
controller. This doesn't make a whole lot of sense to me, though I
don't have the bandwidth to go digging on this just now.

Sorry for the headaches, and thanks for the report, Tony!

Cheers,
Jeff

Dump average transfer rate for 32GB of data:

| deadline | cfq
--------+------------+-----------
Vanilla | 87353 kB/s | 46132 kB/s
Patched | 45756 kB/s | 34564 kB/s
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/