Re: [PATCH 1/3] ftrace: add tracepoint for timer

[Xiao Guangrong]

Thomas Gleixner wrote:
> On Fri, 29 May 2009, Zhaolei wrote:
>> But, for trace_timer_start() in __mod_timer(), we need to put it after
>> timer->* changed.
> 
> Why ?
> 
>>> +	TP_fast_assign(
>>> +		__entry->timer		= timer;
>>> +		__entry->function	= timer->function;
>>> +		__entry->expires	= timer->expires;
>>> +		__entry->cpu		= cpu;
> 
> Again, neither timer nor function nor expires will change when the
> timer is added, right ?
> 
> The only unknown at this point is cpu. See below.
> 
>> Nevertheless, it don't means we need separate trace_timer_start() and
>> debug_timer_activate(), because we can put move debug_timer_activate() below,
>> as:
>> -	debug_timer_activate(timer);
>> 	...
>>  	timer->expires = expires;
>>  	internal_add_timer(base, timer);
>> +	debug_timer_activate(timer);
> 
> No, you can not call it with the base->lock held.
> 
>> +	trace_timer_start(timer, smp_processor_id());
> 
> Also using smp_processor_id() here is wrong. We do not necessarily add
> the timer to the current CPUs timer wheel. See the code which selects
> the timer base. So this information is rather useless, because the
> tracer knows anyway  on which CPU we are running.
> 
> Unfortunately we do not have an easy way to figure out to which CPU
> the base belongs (except if it's the base of the current CPU). There
> is not much we can do about that. But OTOH, this is not a problem
> because we see when the timer expires on which CPU it was enqueued. So
> scrapping the cpu entry in the trace completely is not a big loss.
> 
> The same applies to hrtimers as well.
> 

Hi tglx:

I also have different view here.  :-) 

As you say, "We do not necessarily add the timer to the current CPUs timer
wheel", but the timer is added to current CPU in __mod_timer(), selects the
timer base as below code:
	new_base = __get_cpu_var(tvec_bases);
In this case, we can use smp_processor_id() to get the CPU which timer is
added.

We can not add the timer to the current CPUs by using add_timer_on(), selects
the timer base in this function as below code:
	struct tvec_base *base = per_cpu(tvec_bases, cpu);
In this case, We can know the timer is added to 'cpu'.

So, I add trace_timer_start() in __mod_timer() and add_timer_on()in my patch.

In hrtimer, all timer is added to the current CPU which can be getted by using
smp_processor_id() in probe function, so it not has 'cpu' argument in my patch.

In addition, we do better not put trace_timer_start() and debug_timer_activate
in one function, have two reasons:
1: for trace_timer_start()'s logic, the timer start event is completed in 
   internal_add_timer(), in other words: the timer is not start before
   internal_add_timer().
	
2: as Zhaolei says in the last mail, the timer's data may changed after
   debug_timer_activate().

Thanks,
Xiao Guangrong

> 
> 	tglx
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/