[PATCH 16/22] amd64_edac: add F10h-and-later methods-p3

[Borislav Petkov]

From: Doug Thompson <dougthompson@xxxxxxxxxxxx>

Borislav:

- cleanup, remove StinkyIdentifiers, simplify logic
- fix function return value patterns
- cleanup debug calls

Reviewed-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
Signed-off-by: Doug Thompson <dougthompson@xxxxxxxxxxxx>
Signed-off-by: Borislav Petkov <borislav.petkov@xxxxxxx>
---
 drivers/edac/amd64_edac.c |  268 ++++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 264 insertions(+), 4 deletions(-)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index dbb4c18..f2073c1 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1398,6 +1398,10 @@ static void f10_read_dram_ctl_register(struct amd64_pvt *pvt)
 		debugf0("Reading F10_DCTL_SEL_HIGH failed\n");
 }
 
+/*
+ * determine channel based on the interleaving mode: F10h BKDG, 2.8.9 Memory
+ * Interleaving Modes.
+ */
 static u32 f10_determine_channel(struct amd64_pvt *pvt, u64 sys_addr,
 				int hi_range_sel, u32 intlv_en)
 {
@@ -1408,6 +1412,9 @@ static u32 f10_determine_channel(struct amd64_pvt *pvt, u64 sys_addr,
 	else if (hi_range_sel)
 		cs = dct_sel_high;
 	else if (dct_interleave_enabled(pvt)) {
+		/*
+		 * see F2x110[DctSelIntLvAddr] - channel interleave mode
+		 */
 		if (dct_sel_interleave_addr(pvt) == 0)
 			cs = sys_addr >> 6 & 1;
 		else if ((dct_sel_interleave_addr(pvt) >> 1) & 1) {
@@ -1445,22 +1452,23 @@ static inline u32 f10_map_intlv_en_to_shift(u32 intlv_en)
 	return 0;
 }
 
-static inline u64 f10_determine_base_addr_offset(u64 sys_addr, int hi_range_sel,
+/* See F10h BKDG, 2.8.10.2 DctSelBaseOffset Programming */
+static inline u64 f10_get_base_addr_offset(u64 sys_addr, int hi_range_sel,
 						 u32 dct_sel_base_addr,
 						 u64 dct_sel_base_off,
-						 u32 hole_en, u32 hole_off,
+						 u32 hole_valid, u32 hole_off,
 						 u64 dram_base)
 {
 	u64 chan_off;
 
 	if (hi_range_sel) {
 		if ((!dct_sel_base_addr & 0xFFFF0000) &&
-		   (hole_en & 1) && (sys_addr >= 0x100000000ULL))
+		    hole_valid && (sys_addr >= 0x100000000ULL))
 			chan_off = hole_off << 16;
 		else
 			chan_off = dct_sel_base_off;
 	} else {
-		if ((hole_en & 1) && (sys_addr >= 0x100000000ULL))
+		if (hole_valid && (sys_addr >= 0x100000000ULL))
 			chan_off = hole_off << 16;
 		else
 			chan_off = dram_base & 0xFFFFF8000000ULL;
@@ -1562,4 +1570,256 @@ static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs)
 	return cs_found;
 }
 
+/* For a given @dram_range, check if @sys_addr falls within it. */
+static int f10_match_to_this_node(struct amd64_pvt *pvt, int dram_range,
+				  u64 sys_addr, int *nid, int *chan_sel)
+{
+	int node_id, cs_found = -EINVAL, high_range = 0;
+	u32 intlv_en, intlv_sel, intlv_shift, hole_off;
+	u32 hole_valid, tmp, dct_sel_base, channel;
+	u64 dram_base, chan_addr;
+
+	dram_base = pvt->dram_base[dram_range];
+	intlv_en = pvt->dram_IntlvEn[dram_range];
+
+	node_id = pvt->dram_DstNode[dram_range];
+	intlv_sel = pvt->dram_IntlvSel[dram_range];
+
+	debugf1("(dram=%d) Base=0x%llx SystemAddr= 0x%llx Limit=0x%llx\n",
+		dram_range, dram_base, sys_addr, pvt->dram_limit[dram_range]);
+
+	/*
+	 * This assumes that one node's DHAR is the same as all the other
+	 * nodes' DHAR.
+	 */
+	hole_off = (pvt->dhar & 0x0000FF80);
+	hole_valid = (pvt->dhar & 0x1);
+
+	debugf1("   HoleOffset=0x%x  HoleValid=0x%x IntlvSel=0x%x\n",
+			hole_off, hole_valid, intlv_sel);
+
+	if (intlv_en ||
+	    (intlv_sel != ((sys_addr >> 12) & intlv_en)))
+		return -EINVAL;
+
+	dct_sel_base = dct_sel_baseaddr(pvt);
+
+	/*
+	 * check whether addresses >= DctSelBaseAddr[47:27] are to be used to
+	 * select between DCT0 and DCT1.
+	 */
+	if (dct_high_range_enabled(pvt) &&
+	   !dct_ganging_enabled(pvt) &&
+	   ((sys_addr >> 27) >= (dct_sel_base >> 11)))
+		high_range = 1;
+
+	channel = f10_determine_channel(pvt, sys_addr, high_range, intlv_en);
+
+	chan_addr = f10_get_base_addr_offset(sys_addr, high_range, dct_sel_base,
+					     pvt->dram_ctl_select_high << 16,
+					     hole_valid, hole_off, dram_base);
+
+	intlv_shift = f10_map_intlv_en_to_shift(intlv_en);
+
+	/* remove Node ID (in case of memory interleaving) */
+	tmp = chan_addr & 0xFC0;
+
+	chan_addr = ((chan_addr >> intlv_shift) & 0xFFFFFFFFF000ULL) | tmp;
+
+	/* remove channel interleave and hash */
+	if (dct_interleave_enabled(pvt) &&
+	   !dct_high_range_enabled(pvt) &&
+	   !dct_ganging_enabled(pvt)) {
+		if (dct_sel_interleave_addr(pvt) != 1)
+			chan_addr = (chan_addr >> 1) & 0xFFFFFFFFFFFFFFC0ULL;
+		else {
+			tmp = chan_addr & 0xFC0;
+			chan_addr = ((chan_addr & 0xFFFFFFFFFFFFC000ULL) >> 1)
+					| tmp;
+		}
+	}
+
+	debugf1("   (ChannelAddrLong=0x%llx) >> 8 becomes InputAddr=0x%x\n",
+		chan_addr, (u32)(chan_addr >> 8));
+
+	cs_found = f10_lookup_addr_in_dct(chan_addr >> 8, node_id, channel);
+
+	if (cs_found >= 0) {
+		*nid = node_id;
+		*chan_sel = channel;
+	}
+	return cs_found;
+}
+
+static int f10_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr,
+				       int *node, int *chan_sel)
+{
+	int dram_range, cs_found = -EINVAL;
+	u64 dram_base, dram_limit;
+
+	for (dram_range = 0; dram_range < DRAM_REG_COUNT; dram_range++) {
+
+		if (!pvt->dram_rw_en[dram_range])
+			continue;
+
+		dram_base = pvt->dram_base[dram_range];
+		dram_limit = pvt->dram_limit[dram_range];
+
+		if ((dram_base <= sys_addr) && (sys_addr <= dram_limit)) {
+
+			cs_found = f10_match_to_this_node(pvt, dram_range,
+							  sys_addr, node,
+							  chan_sel);
+			if (cs_found >= 0)
+				break;
+		}
+	}
+	return cs_found;
+}
+
+/*
+ * This the F10h reference code from AMD to map a @sys_addr to NodeID,
+ * CSROW, Channel.
+ *
+ * The @sys_addr is usually an error address received from the hardware.
+ */
+static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
+				     struct amd64_error_info_regs *info,
+				     u64 sys_addr)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	u32 page, offset;
+	unsigned short syndrome;
+	int nid, csrow, chan = 0;
+
+	csrow = f10_translate_sysaddr_to_cs(pvt, sys_addr, &nid, &chan);
+
+	if (csrow >= 0) {
+		error_address_to_page_and_offset(sys_addr, &page, &offset);
+
+		syndrome = EXTRACT_HIGH_SYNDROME(info->nbsl) << 8;
+		syndrome |= EXTRACT_LOW_SYNDROME(info->nbsh);
+
+		/*
+		 * Is CHIPKILL on? If so, then we can attempt to use the
+		 * syndrome to isolate which channel the error was on.
+		 */
+		if (pvt->nbcfg & K8_NBCFG_CHIPKILL)
+			chan = get_channel_from_ecc_syndrome(syndrome);
+
+		if (chan >= 0) {
+			edac_mc_handle_ce(mci, page, offset, syndrome,
+					csrow, chan, EDAC_MOD_STR);
+		} else {
+			/*
+			 * Channel unknown, report all channels on this
+			 * CSROW as failed.
+			 */
+			for (chan = 0; chan < mci->csrows[csrow].nr_channels;
+								chan++) {
+					edac_mc_handle_ce(mci, page, offset,
+							syndrome,
+							csrow, chan,
+							EDAC_MOD_STR);
+			}
+		}
+
+	} else {
+		edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR);
+	}
+}
+
+/*
+ * Input (@index) is the DBAM DIMM value (1 of 4) used as an index into a shift
+ * table (revf_quad_ddr2_shift) which starts at 128MB DIMM size. Index of 0
+ * indicates an empty DIMM slot, as reported by Hardware on empty slots.
+ *
+ * Normalize to 128MB by subracting 27 bit shift.
+ */
+static int map_dbam_to_csrow_size(int index)
+{
+	int mega_bytes = 0;
+
+	if (index > 0 && index <= DBAM_MAX_VALUE)
+		mega_bytes = ((128 << (revf_quad_ddr2_shift[index]-27)));
+
+	return mega_bytes;
+}
+
+/*
+ * debug routine to display the memory sizes of a DIMM (ganged or not) and it
+ * CSROWs as well
+ */
+static void f10_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt,
+					 int ganged)
+{
+	int dimm, size0, size1;
+	u32 dbam;
+	u32 *dcsb;
+
+	debugf1("  dbam%d: 0x%8.08x  CSROW is %s\n", ctrl,
+			ctrl ? pvt->dbam1 : pvt->dbam0,
+			ganged ? "GANGED - dbam1 not used" : "NON-GANGED");
+
+	dbam = ctrl ? pvt->dbam1 : pvt->dbam0;
+	dcsb = ctrl ? pvt->dcsb1 : pvt->dcsb0;
+
+	/* Dump memory sizes for DIMM and its CSROWs */
+	for (dimm = 0; dimm < 4; dimm++) {
+
+		size0 = 0;
+		if (dcsb[dimm*2] & K8_DCSB_CS_ENABLE)
+			size0 = map_dbam_to_csrow_size(DBAM_DIMM(dimm, dbam));
+
+		size1 = 0;
+		if (dcsb[dimm*2 + 1] & K8_DCSB_CS_ENABLE)
+			size1 = map_dbam_to_csrow_size(DBAM_DIMM(dimm, dbam));
+
+		debugf1("     CTRL-%d DIMM-%d=%5dMB   CSROW-%d=%5dMB "
+				"CSROW-%d=%5dMB\n",
+				ctrl,
+				dimm,
+				size0 + size1,
+				dimm * 2,
+				size0,
+				dimm * 2 + 1,
+				size1);
+	}
+}
+
+/*
+ * Very early hardware probe on pci_probe thread to determine if this module
+ * supports the hardware.
+ *
+ * Return:
+ *      0 for OK
+ *      1 for error
+ */
+static int f10_probe_valid_hardware(struct amd64_pvt *pvt)
+{
+	int ret = 0;
+
+	/*
+	 * If we are on a DDR3 machine, we don't know yet if
+	 * we support that properly at this time
+	 */
+	if ((pvt->dchr0 & F10_DCHR_Ddr3Mode) ||
+	    (pvt->dchr1 & F10_DCHR_Ddr3Mode)) {
+
+		amd64_printk(KERN_WARNING,
+			"%s() This machine is running with DDR3 memory. "
+			"This is not currently supported. "
+			"DCHR0=0x%x DCHR1=0x%x\n",
+			__func__, pvt->dchr0, pvt->dchr1);
+
+		amd64_printk(KERN_WARNING,
+			"   Contact '%s' module MAINTAINER to help add"
+			" support.\n",
+			EDAC_MOD_STR);
+
+		ret = 1;
+
+	}
+	return ret;
+}
 
-- 
1.6.2.4


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/