bug in drivers/edac/mpc85xx_edac.c:mpc85xx_mc_check()

[Jeff Haran]

Hi,

Recent versions of this function contain the following snippets:

    if (err_detect & DDR_EDE_SBE)
        edac_mc_handle_ce(mci, pfn, err_addr & PAGE_MASK,
                  syndrome, row_index, 0, mci->ctl_name);

    if (err_detect & DDR_EDE_MBE)
        edac_mc_handle_ue(mci, pfn, err_addr & PAGE_MASK,
                  row_index, mci->ctl_name);

I am pretty sure the references to PAGE_MASK should be proceeded by a
tilda, as in:

    if (err_detect & DDR_EDE_SBE)
        edac_mc_handle_ce(mci, pfn, err_addr & ~PAGE_MASK,
                  syndrome, row_index, 0, mci->ctl_name);

    if (err_detect & DDR_EDE_MBE)
        edac_mc_handle_ue(mci, pfn, err_addr & ~PAGE_MASK,
                  row_index, mci->ctl_name);


Much as I would like to submit a tested patch like the rest of the
world, I find myself in the situation where the only Freescale target
system I have to test on is running a 3 year old kernel (2.6.14), which
preceeds the introduction of EDAC driver support, at least for
Freescale. So the best I can do is borrow from the new EDAC driver and
backport it to the old kernel.

But I have learned a few things in this process and can thus share what
I've learned as it may be of help to the EDAC driver developers:

1) Before you read the Freescale 8548 CAPTURE_ADDRESS register, you want
to read CAPTURE_ATTRIBUTES first and make sure the VLD bit (least
significant bit in the register) is set or else the data in
CAPTURE_ADDRESS may not be yet valid.

2) When you are done scrubbing the memory with the single bit error, you
want to write 0 to CAPTURE_ATTRIBUTES so as to clear VLD and thus setup
the ECC capture logic to capture the next single bit error.

Please include this email address in responses as I do not subscribe.

Thanks,

Jeff Haran
Brocade
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/