Re: Out-of-order writing by disk drives

[Anton Ertl]

Andi Kleen wrote:
> 
> "Anton Ertl" <anton@xxxxxxxxxxxxxxxxxxxxxxxxxx> writes:
> >
> > /dev/md2        /home           ext3    defaults,barrier=1      1	2
> 
> Just make sure /dev/md2 is a RAID1, MD RAID0/5/10 don't support barriers.

Thank you.  I added the following to the README:

|Note that, as of this writing (2009-04), not all Linux devices support
|barriers, in particular md devices only support them in RAID 1 mode;
|the kernel will reportedly warn about the lack of barriers if you try
|to use ext3 with barriers on a device that does not support barriers
|(look in, e.g., dmesg).

> See also my general treatise of multiple device barriers earlier today.

I guess you mean <878wm3903h.fsf@xxxxxxxxxxxxxxxxx> in the
"dm-multipath and write request ordering" thread.  Thank you for the
pointer.

- anton

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/