Re: [BISECTED] EEE PC hangs when booting off battery

[Alan Jenkins]

Bjorn Helgaas wrote:
> On Sunday 12 April 2009 07:11:57 am Alan Jenkins wrote:
>   
> You mention that this occurs when booting off battery.  So I
> assume everything works fine when the EEE is plugged in to the
> wall socket?
>   

When I tested it before, that was what I found.

However, I now find that's not quite right.  It only works (i.e. doesn't
hang) if I remove the battery as well as plugging it into the wall.  If
I have the battery in, it hangs.

>>>>> Magic SysRQ keys work though.  ...
>>>>>           
>>> I was able to run SysRq-P, and found the following backtrace -
>>>
>>> Pid: 0
>>> EIP is at acpi_idle_enter_bm+0x1df/0x208 [processor]
>>>       
>
> Can you figure out where this is in acpi_idle_enter_bm() or
> maybe just email me your processor.ko module?
>
> Does it always happen at the same point?
>   

Yes, it always happens at the same point.

It turns out I can read the runes, but I don't understand what they're
saying :-).

objdump -dr processor.o

00001bd0 <acpi_idle_enter_bm>:

...
00001bd0 + 0x1df = 00001daf
...
    1d70:       b8 03 00 00 00          mov    $0x3,%eax
    1d75:       e8 90 f3 ff ff          call   110a <tsc_halts_in_c>
    1d7a:       85 c0                   test   %eax,%eax
    1d7c:       74 0a                   je     1d88 <acpi_idle_enter_bm+0x1b8>
    1d7e:       b8 0e 09 00 00          mov    $0x90e,%eax
                        1d7f: R_386_32  .rodata.str1.1
    1d83:       e8 fc ff ff ff          call   1d84 <acpi_idle_enter_bm+0x1b4>
                        1d84: R_386_PC32        mark_tsc_unstable
    1d88:       8b 45 e8                mov    -0x18(%ebp),%eax
    1d8b:       8b 55 ec                mov    -0x14(%ebp),%edx
    1d8e:       e8 ab fd ff ff          call   1b3e <us_to_pm_timer_ticks>
    1d93:       89 c3                   mov    %eax,%ebx
    1d95:       b8 17 01 00 00          mov    $0x117,%eax
    1d9a:       69 ca 17 01 00 00       imul   $0x117,%edx,%ecx
    1da0:       89 d6                   mov    %edx,%esi
    1da2:       f7 e3                   mul    %ebx
    1da4:       8d 14 11                lea    (%ecx,%edx,1),%edx
    1da7:       e8 fc ff ff ff          call   1da8 <acpi_idle_enter_bm+0x1d8>
                        1da8: R_386_PC32        sched_clock_idle_wakeup_event
    1dac:       fb                      sti
    1dad:       89 e0                   mov    %esp,%eax
->  1daf:       31 c9                   xor    %ecx,%ecx              <---------
    1db1:       25 00 e0 ff ff          and    $0xffffe000,%eax
    1db6:       89 fa                   mov    %edi,%edx
    1db8:       83 48 0c 04             orl    $0x4,0xc(%eax)
    1dbc:       ff 47 18                incl   0x18(%edi)
    1dbf:       8b 45 e4                mov    -0x1c(%ebp),%eax
    1dc2:       e8 a4 f5 ff ff          call   136b <acpi_state_timer_broadcast>
    1dc7:       01 5f 1c                add    %ebx,0x1c(%edi)
    1dca:       11 77 20                adc    %esi,0x20(%edi)
    1dcd:       8b 45 e8                mov    -0x18(%ebp),%eax
    1dd0:       83 c4 10                add    $0x10,%esp
    1dd3:       5b                      pop    %ebx
    1dd4:       5e                      pop    %esi
    1dd5:       5f                      pop    %edi
    1dd6:       5d                      pop    %ebp
    1dd7:       c3                      ret


> If you blacklist or rename the processor module to prevent it
> from loading, does that keep the hang from occurring?
>   

No.  In that case I get the hang in default_idle+0x59/0x95

0000007a <default_idle>:
  7a:   55                      push   %ebp
  7b:   89 e5                   mov    %esp,%ebp
  7d:   56                      push   %esi
  7e:   53                      push   %ebx
  7f:   83 ec 18                sub    $0x18,%esp
  82:   83 3d 18 00 00 00 00    cmpl   $0x0,0x18
                        84: R_386_32    .bss
  89:   75 7a                   jne    105 <default_idle+0x8b>
  8b:   80 3d 05 00 00 00 00    cmpb   $0x0,0x5
                        8d: R_386_32    boot_cpu_data
  92:   74 71                   je     105 <default_idle+0x8b>
  94:   83 3d 04 00 00 00 00    cmpl   $0x0,0x4
                        96: R_386_32    __tracepoint_power_start
  9b:   74 23                   je     c0 <default_idle+0x46>
  9d:   8b 1d 08 00 00 00       mov    0x8,%ebx
                        9f: R_386_32    __tracepoint_power_start
  a3:   85 db                   test   %ebx,%ebx
  a5:   74 19                   je     c0 <default_idle+0x46>
  a7:   8d 75 e0                lea    -0x20(%ebp),%esi
  aa:   b9 01 00 00 00          mov    $0x1,%ecx
  af:   ba 01 00 00 00          mov    $0x1,%edx
  b4:   89 f0                   mov    %esi,%eax
  b6:   ff 13                   call   *(%ebx)
  b8:   83 c3 04                add    $0x4,%ebx
  bb:   83 3b 00                cmpl   $0x0,(%ebx)
  be:   75 ea                   jne    aa <default_idle+0x30>
  c0:   89 e0                   mov    %esp,%eax
  c2:   25 00 e0 ff ff          and    $0xffffe000,%eax
  c7:   83 60 0c fb             andl   $0xfffffffb,0xc(%eax)
  cb:   f6 40 08 08             testb  $0x8,0x8(%eax)
  cf:   75 04                   jne    d5 <default_idle+0x5b>
  d1:   fb                      sti
  d2:   f4                      hlt
-->  d3:   eb 01                   jmp    d6 <default_idle+0x5c>    <--------
  d5:   fb                      sti
  d6:   89 e0                   mov    %esp,%eax
  d8:   25 00 e0 ff ff          and    $0xffffe000,%eax
  dd:   83 48 0c 04             orl    $0x4,0xc(%eax)
  e1:   83 3d 04 00 00 00 00    cmpl   $0x0,0x4
                        e3: R_386_32    __tracepoint_power_end
  e8:   74 1e                   je     108 <default_idle+0x8e>


>> 7ec0a7290797f57b780f792d12f4bcc19c83aa4f is first bad commit
>> commit 7ec0a7290797f57b780f792d12f4bcc19c83aa4f
>> Author: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
>> Date:   Mon Mar 30 17:48:24 2009 +0000
>>     
>
> Ouch, sorry about that.  Thanks for doing all the bisection work.
>
>   
>>     ACPI: processor: use .notify method instead of installing handler
>> directly
>>
>>     This patch adds a .notify() method.  The presence of .notify() causes
>>     Linux/ACPI to manage event handlers and notify handlers on our behalf,
>>     so we don't have to install and remove them ourselves.
>>
>>     Signed-off-by: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
>>     CC: Zhang Rui <rui.zhang@xxxxxxxxx>
>>     CC: Zhao Yakui <yakui.zhao@xxxxxxxxx>
>>     CC: Venki Pallipadi <venkatesh.pallipadi@xxxxxxxxx>
>>     CC: Anil S Keshavamurthy <anil.s.keshavamurthy@xxxxxxxxx>
>>     Signed-off-by: Len Brown <len.brown@xxxxxxxxx>
>>
>> However, reverting this commit from v2.6.30-rc1 doesn't solve the hang.
>>     
>
> I don't see the problem in that commit yet, and if there is a problem
> with it, I would think that reverting it from 2.6.30-rc1 would solve
> it.  But maybe it'd be useful to revert the whole .notify series to
> make sure.  From 2.6.30-rc1, you should be able to revert these:
>
>   7ec0a7290797f57b780f792d12f4bcc19c83aa4f processor
>   373cfc360ec773be2f7615e59a19f3313255db7c button
>   46ec8598fde74ba59703575c22a6fb0b6b151bb6 Linux/ACPI infrastructure
>
> What happens with those commits reverted?
>   

I'll find out tomorrow.

Thanks
Alan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/