Re: no sound with the new imac
From: Justin Mattock
Date: Mon Apr 13 2009 - 11:18:26 EST
On Mon, Apr 13, 2009 at 6:36 AM, Takashi Iwai <tiwai@xxxxxxx> wrote:
> At Wed, 8 Apr 2009 08:58:34 -0700,
> Justin Mattock wrote:
>>
>> On Wed, Apr 8, 2009 at 7:40 AM, Clemens Ladisch <clemens@xxxxxxxxxx> wrote:
>> > Rafael J. Wysocki wrote:
>> >> Takashi, what's the appropriate list for ALSA-related things?
>> >
>> > alsa-devel (Takashi is on vacation until after the Easter weekend).
>> >
>> >> On Wednesday 08 April 2009, Justin Mattock wrote:
>> >> > Can somebody point me in the right direction
>> >> > to creating the correct pin numbers etc...
>> >> > for the new imac so I can have sound.
>> >
>> > What kernel version are you using? Are there any messages in the
>> > system log when you load the snd-hda-intel driver? What model do you
>> > mean with "the new imac"? What are the contents of
>> > /proc/asound/card0/codec#0?
>> >
>> >
>> > Best regards,
>> > Clemens
>> >
>>
>> sh^t
>> forgot about easter.
>> anyways(just another day to me)
>>
>> As for when I mean new imac, I mean
>> the new update that took place a few weeks ago.
>> here is cat /proc/asound/*
>> dmesg,lspci is in the file imacinfo.
>> attached.
>
> Thanks. The best would be the result of alsa-info.sh script.
> Get it from
> http://www.alsa-project.org/alsa-info.sh
> and run it with --no-upload option, then attach the generated file.
>
> As another information, check $LINUX/Documentation/sound/alsa/HD-Audio.txt
> (appearing from 2.6.29). It contains some details about the HD audio
> driver implementation and give a few debug hints.
>
>
> Takashi
>
O.K.
I must admit, I'm crying to my mommy on this one!!
Anyways So far I've taken the imac91 patch as a template, and tried
to just move the numbers around(but still am missing things).
Attached is alsa-info.txt generated by the script.
when running the script I receive some errors:
Do you want to run this script? [y/n] : y
cat: /proc/asound/modules: No such file or directory
ls: cannot access /dev/snd/*: No such file or directory
/usr/sbin/alsactl: save_state:1502: No soundcards found...
cat: /tmp/alsa-info.gzrebn0ykD/alsactl.tmp: No such file or directory
but there was some info with alsa-info.txt.
As soon as I get some time I'll try and look,
to see If I can connect the dots.
As for enjoying the music itself
(not so bad using the ipod/iphone,
until that is I get a longer cable for the headphones,
This way I'm not so close to the screen.)
regards,
and I apologize for being impatient.
--
Justin P. Mattock
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.56
!!################################
!!Script ran on: Mon Apr 13 22:02:43 UTC 2009
!!Linux Distribution
!!------------------
!!Kernel Information
!!------------------
Kernel release: 2.6.29
Operating System: GNU/Linux
Architecture: i686
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.18a
Library version: 1.0.19
Utilities version: 1.0.19
!!Loaded ALSA modules
!!-------------------
!!Sound Servers on this system
!!----------------------------
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xd3480000 irq 17
!!PCI Soundcards installed in the system
!!--------------------------------------
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
!!Advanced information - PCI Vendor/Device/Susbsystem ID's
!!--------------------------------------------------------
00:08.0 0403: 10de:0ac0 (rev b1)
Subsystem: 10de:cb79
!!Loaded sound module options
!!--------------------------
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Realtek ALC889A
Address: 0
Vendor Id: 0x10ec0885
Subsystem Id: 0x106b4900
Revision Id: 0x100103
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=1, dir=1, wake=0, sticky=0, data=1, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x11: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x11: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Audio Output] wcaps 0x11: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x05 [Audio Output] wcaps 0x11: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x24
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x22
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Unsolicited: tag=00, enabled=0
Connection: 1
0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
Connection: 10
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Connection: 2
0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Connection: 2
0x05 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x012b4050: [Jack] HP Out at Ext Rear
Conn = Comb, Color = Green
DefAssociation = 0x5, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP VREF_HIZ
Unsolicited: tag=04, enabled=1
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x018b3020: [Jack] Line In at Ext Rear
Conn = Comb, Color = Blue
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000003c: IN OUT HP Detect
Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c 0x0d 0x0e* 0x0f 0x26
Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000003c: IN OUT HP Detect
Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c 0x0d 0x0e 0x0f* 0x26
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x90100141: [Fixed] Speaker at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x4, Sequence = 0x1
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x90a00110: [Fixed] Mic at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x90100140: [Fixed] Speaker at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x4, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c 0x0d* 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
Pincap 0x00000010: OUT
Pin Default 0x014be060: [Jack] SPDIF Out at Ext Rear
Conn = Comb, Color = White
DefAssociation = 0x6, Sequence = 0x0
Pin-ctls: 0x40: OUT
Connection: 1
0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
Pincap 0x00000020: IN
Pin Default 0x01cbe030: [Jack] SPDIF In at Ext Rear
Conn = Comb, Color = White
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x20: IN
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=17
Processing Coefficient: 0x12
Coefficient Index: 0x01
Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
Volume-Knob: delta=0, steps=32, direct=0, val=59
Unsolicited: tag=00, enabled=0
Connection: 0
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x24 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x25 [Audio Output] wcaps 0x11: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Connection: 2
0x25 0x0b
--endcollapse--
!!ALSA Device nodes
!!-----------------
!!Aplay/Arecord output
!!------------
APLAY
aplay: device_list:217: no soundcards found...
ARECORD
arecord: device_list:217: no soundcards found...
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [NVidia]
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
!!Alsactl output
!!-------------
--startcollapse--
--endcollapse--
!!All Loaded Modules
!!------------------
Module
ndiswrapper
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
firewire_ohci
firewire_core
nvidia
snd_hwdep
ohci1394
agpgart
snd_pcm
snd_timer
ieee1394
thermal
ehci_hcd
button
snd_page_alloc
evdev
hci_uart
sco
rfcomm
btusb
hidp
l2cap
bluetooth
ipmi_watchdog
ipmi_msghandler
uvcvideo
isight_firmware
uinput
arpt_mangle
arptable_filter
arp_tables
nf_conntrack_ipv4
nf_conntrack
nf_defrag_ipv4
iptable_mangle
iptable_filter
ip_tables
x_tables
coretemp
acpi_cpufreq
processor
applesmc
/**** dmesg/lspci ***/
[ 0.000000] Linux version 2.6.29 (name@name) (gcc version 4.5.0 20090327 (experimental) (GCC) ) #11 SMP Sun Apr 12 20:26:14 PDT 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000be830000 (usable)
[ 0.000000] BIOS-e820: 00000000be830000 - 00000000be834000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000be834000 - 00000000be84f000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000be84f000 - 00000000bea50000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bea50000 - 00000000bfec5000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfec5000 - 00000000bfec7000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfec7000 - 00000000bfec8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfec8000 - 00000000bfecb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfecb000 - 00000000bfecd000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfecd000 - 00000000bfedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000bfef9000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d3400000 - 00000000d3401000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xbe830 max_arch_pfn = 0x100000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[ 0.000000] ACPI: XSDT BFEEE1C0, 0074 (r1 APPLE Apple00 8D 1000013)
[ 0.000000] ACPI: FACP BFEEC000, 00F4 (r3 APPLE Apple00 8D Loki 5F)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT BFEE0000, 5566 (r1 APPLE iMac 90001 INTL 20061109)
[ 0.000000] ACPI: FACS BFECD000, 0040
[ 0.000000] ACPI: HPET BFEEB000, 0038 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: APIC BFEEA000, 0068 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: MCFG BFEE9000, 003C (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ASF! BFEE8000, 00A5 (r32 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SBST BFEE7000, 0030 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ECDT BFEE6000, 0053 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SSDT BFEC7000, 04DC (r1 APPLE CpuPm 3000 INTL 20061109)
[ 0.000000] ACPI: SSDT BFEDF000, 00A5 (r1 SataRe SataPri 1000 INTL 20061109)
[ 0.000000] ACPI: SSDT BFECC000, 009F (r1 SataRe SataSec 1000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2160MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 00000000 - 377fe000
[ 0.000000] bootmap 00008000 - 0000ef00
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 0000690550] TEXT DATA BSS ==> [0000100000 - 0000690550]
[ 0.000000] #4 [0000691000 - 0000694000] INIT_PG_TABLE ==> [0000691000 - 0000694000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000be830
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000be830
[ 0.000000] On node 0 totalpages: 780239
[ 0.000000] free_area_init_node: node 0, pgdat c0563a80, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4321 pages used for memmap
[ 0.000000] HighMem zone: 548689 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap: d3401000:1cbff000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 40960 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 774142
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.29 root=/dev/sda3 debug vga=893 audit=1 selinux=1 enforcing=0
[ 0.000000] audit: enabled (after initialization)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3051.880 MHz processor.
[ 0.010000] spurious 8259A interrupt: IRQ7.
[ 0.010000] Console: colour dummy device 80x25
[ 0.010000] console [tty0] enabled
[ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.010000] Memory: 3088992k/3121344k available (2964k kernel code, 31156k reserved, 1621k data, 408k init, 2212040k highmem)
[ 0.010000] virtual kernel memory layout:
[ 0.010000] fixmap : 0xfff9e000 - 0xfffff000 ( 388 kB)
[ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.010000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.010000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.010000] .init : 0xc0582000 - 0xc05e8000 ( 408 kB)
[ 0.010000] .data : 0xc03e5229 - 0xc057a784 (1621 kB)
[ 0.010000] .text : 0xc0100000 - 0xc03e5229 (2964 kB)
[ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.010000] hpet clockevent registered
[ 0.010000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6103.76 BogoMIPS (lpj=30518800)
[ 0.010000] Security Framework initialized
[ 0.010000] SELinux: Initializing.
[ 0.010000] SELinux: Starting in permissive mode
[ 0.010000] Mount-cache hash table entries: 512
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 6144K
[ 0.010000] [ds] using Core 2/Atom configuration
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 0
[ 0.010000] Intel machine check architecture supported.
[ 0.010000] Intel machine check reporting enabled on CPU#0.
[ 0.010000] using mwait in idle threads.
[ 0.010000] Checking 'hlt' instruction... OK.
[ 0.041398] ACPI: Core revision 20081204
[ 0.075070] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.175110] CPU0: Intel(R) Core(TM)2 Duo CPU E8435 @ 3.06GHz stepping 0a
[ 0.180000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.010000] Initializing CPU#1
[ 0.010000] Calibrating delay using timer specific routine.. 6102.65 BogoMIPS (lpj=30513256)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 6144K
[ 0.010000] [ds] using Core 2/Atom configuration
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 1
[ 0.010000] Intel machine check architecture supported.
[ 0.010000] Intel machine check reporting enabled on CPU#1.
[ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.332457] CPU1: Intel(R) Core(TM)2 Duo CPU E8435 @ 3.06GHz stepping 0a
[ 0.332507] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.340029] Brought up 2 CPUs
[ 0.340034] Total of 2 processors activated (12206.41 BogoMIPS).
[ 0.340117] CPU0 attaching sched-domain:
[ 0.340123] domain 0: span 0-1 level MC
[ 0.340128] groups: 0 1
[ 0.340136] CPU1 attaching sched-domain:
[ 0.340140] domain 0: span 0-1 level MC
[ 0.340144] groups: 1 0
[ 0.340247] net_namespace: 800 bytes
[ 0.340566] Booting paravirtualized kernel on bare hardware
[ 0.340786] NET: Registered protocol family 16
[ 0.340786] EISA bus registered
[ 0.340786] ACPI: bus type pci registered
[ 0.340786] PCI: Using configuration type 1 for base access
[ 0.350132] bio: create slab <bio-0> at 0
[ 0.362043] ACPI: EC: EC description table is found, configuring boot EC
[ 0.362480] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.372306] ACPI: BIOS _OSI(Linux) query ignored
[ 0.374801] ACPI: Interpreter enabled
[ 0.374810] ACPI: (supports S0 S3 S4 S5)
[ 0.374912] ACPI: Using IOAPIC for interrupt routing
[ 0.417757] ACPI: EC: GPE = 0x3f, I/O: command/status = 0x66, data = 0x62
[ 0.417757] ACPI: EC: driver started in interrupt mode
[ 0.417757] ACPI: No dock devices found.
[ 0.417757] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.420744] pci 0000:00:03.0: reg 10 io port: [0x2000-0x20ff]
[ 0.420866] pci 0000:00:03.2: reg 10 io port: [0x2180-0x21bf]
[ 0.420886] pci 0000:00:03.2: reg 20 io port: [0x2140-0x217f]
[ 0.420894] pci 0000:00:03.2: reg 24 io port: [0x2100-0x213f]
[ 0.420923] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.420932] pci 0000:00:03.2: PME# disabled
[ 0.421117] pci 0000:00:03.5: reg 10 32bit mmio: [0xd3400000-0xd347ffff]
[ 0.421220] pci 0000:00:04.0: reg 10 32bit mmio: [0xd3488000-0xd3488fff]
[ 0.421260] pci 0000:00:04.0: supports D1 D2
[ 0.421264] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.421271] pci 0000:00:04.0: PME# disabled
[ 0.421307] pci 0000:00:04.1: reg 10 32bit mmio: [0xd3489200-0xd34892ff]
[ 0.421353] pci 0000:00:04.1: supports D1 D2
[ 0.421357] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.421364] pci 0000:00:04.1: PME# disabled
[ 0.421405] pci 0000:00:06.0: reg 10 32bit mmio: [0xd3487000-0xd3487fff]
[ 0.421444] pci 0000:00:06.0: supports D1 D2
[ 0.421449] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.421456] pci 0000:00:06.0: PME# disabled
[ 0.421491] pci 0000:00:06.1: reg 10 32bit mmio: [0xd3489100-0xd34891ff]
[ 0.421537] pci 0000:00:06.1: supports D1 D2
[ 0.421542] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.421549] pci 0000:00:06.1: PME# disabled
[ 0.421589] pci 0000:00:08.0: reg 10 32bit mmio: [0xd3480000-0xd3483fff]
[ 0.421629] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.421635] pci 0000:00:08.0: PME# disabled
[ 0.421717] pci 0000:00:0a.0: reg 10 32bit mmio: [0xd3486000-0xd3486fff]
[ 0.421726] pci 0000:00:0a.0: reg 14 io port: [0x21e0-0x21e7]
[ 0.421734] pci 0000:00:0a.0: reg 18 32bit mmio: [0xd3489000-0xd34890ff]
[ 0.421743] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xd3489300-0xd348930f]
[ 0.421775] pci 0000:00:0a.0: supports D1 D2
[ 0.421779] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.421787] pci 0000:00:0a.0: PME# disabled
[ 0.421824] pci 0000:00:0b.0: reg 10 io port: [0x21d8-0x21df]
[ 0.421832] pci 0000:00:0b.0: reg 14 io port: [0x21ec-0x21ef]
[ 0.421840] pci 0000:00:0b.0: reg 18 io port: [0x21d0-0x21d7]
[ 0.421847] pci 0000:00:0b.0: reg 1c io port: [0x21e8-0x21eb]
[ 0.421855] pci 0000:00:0b.0: reg 20 io port: [0x21c0-0x21cf]
[ 0.421864] pci 0000:00:0b.0: reg 24 32bit mmio: [0xd3484000-0xd3485fff]
[ 0.422090] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.422101] pci 0000:00:0c.0: PME# disabled
[ 0.422341] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.422352] pci 0000:00:15.0: PME# disabled
[ 0.422582] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.422594] pci 0000:00:16.0: PME# disabled
[ 0.422686] pci 0000:00:09.0: transparent bridge
[ 0.422694] pci 0000:00:09.0: bridge 32bit mmio: [0xd3300000-0xd33fffff]
[ 0.422749] pci 0000:02:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff]
[ 0.422764] pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.422778] pci 0000:02:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff]
[ 0.422788] pci 0000:02:00.0: reg 24 io port: [0x1000-0x107f]
[ 0.422798] pci 0000:02:00.0: reg 30 32bit mmio: [0xd3000000-0xd307ffff]
[ 0.422892] pci 0000:00:0c.0: bridge io port: [0x1000-0x1fff]
[ 0.422903] pci 0000:00:0c.0: bridge 32bit mmio: [0xd0000000-0xd30fffff]
[ 0.422922] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.423145] pci 0000:03:00.0: reg 10 64bit mmio: [0xd3200000-0xd3203fff]
[ 0.423214] pci 0000:03:00.0: supports D1 D2
[ 0.423218] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.423226] pci 0000:03:00.0: PME# disabled
[ 0.423302] pci 0000:00:15.0: bridge 32bit mmio: [0xd3200000-0xd32fffff]
[ 0.423397] pci 0000:04:00.0: reg 10 64bit mmio: [0xd3100000-0xd3100fff]
[ 0.423464] pci 0000:04:00.0: supports D1 D2
[ 0.423469] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.423477] pci 0000:04:00.0: PME# disabled
[ 0.423550] pci 0000:00:16.0: bridge 32bit mmio: [0xd3100000-0xd31fffff]
[ 0.423612] pci_bus 0000:00: on NUMA node 0
[ 0.423629] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.640404] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.641372] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.642337] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.643300] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.644261] ACPI: PCI Interrupt Link [Z003] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.645229] ACPI: PCI Interrupt Link [Z004] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.646190] ACPI: PCI Interrupt Link [Z005] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.647149] ACPI: PCI Interrupt Link [Z006] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.648112] ACPI: PCI Interrupt Link [Z007] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.649075] ACPI: PCI Interrupt Link [Z008] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.650060] ACPI: PCI Interrupt Link [Z009] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.651023] ACPI: PCI Interrupt Link [Z00A] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.651984] ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.652950] ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.653935] ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.654923] ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.655910] ACPI: PCI Interrupt Link [Z00F] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.656894] ACPI: PCI Interrupt Link [Z00G] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.657878] ACPI: PCI Interrupt Link [Z00H] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.658860] ACPI: PCI Interrupt Link [Z00I] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.659840] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *7
[ 0.660840] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.661820] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.662796] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.663773] ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.664747] ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.665722] ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.666706] ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.667685] ACPI: PCI Interrupt Link [Z00R] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.668655] ACPI: PCI Interrupt Link [Z00S] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.669625] ACPI: PCI Interrupt Link [Z00T] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.670618] ACPI: PCI Interrupt Link [Z00U] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.671586] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
[ 0.672550] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.673512] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.674476] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *14
[ 0.675436] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
[ 0.676425] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.677402] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.678378] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.679354] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.680353] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
[ 0.681326] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
[ 0.682297] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
[ 0.682501] SCSI subsystem initialized
[ 0.682501] libata version 3.00 loaded.
[ 0.682501] usbcore: registered new interface driver usbfs
[ 0.682501] usbcore: registered new interface driver hub
[ 0.682501] usbcore: registered new device driver usb
[ 0.682501] PCI: Using ACPI for IRQ routing
[ 0.750173] cfg80211: Using static regulatory domain info
[ 0.750173] cfg80211: Regulatory domain: US
[ 0.750173] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.750173] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.750173] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.750173] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.750173] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.750173] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.750173] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.750173] cfg80211: Calling CRDA for country: US
[ 0.750173] NetLabel: Initializing
[ 0.750173] NetLabel: domain hash size = 128
[ 0.750173] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.750185] NetLabel: unlabeled traffic allowed by default
[ 0.750201] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.750211] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.770006] Switched to high resolution mode on CPU 0
[ 0.772546] Switched to high resolution mode on CPU 1
[ 0.810039] pnp: PnP ACPI init
[ 0.810055] ACPI: bus type pnp registered
[ 0.821560] pnp: PnP ACPI: found 8 devices
[ 0.821566] ACPI: ACPI bus type pnp unregistered
[ 0.821586] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.821601] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.821615] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.821622] system 00:06: ioport range 0x480-0x4ff has been reserved
[ 0.821629] system 00:06: ioport range 0x500-0x57f has been reserved
[ 0.821636] system 00:06: ioport range 0x580-0x5ff has been reserved
[ 0.821642] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.821649] system 00:06: ioport range 0x880-0x8ff has been reserved
[ 0.821656] system 00:06: ioport range 0x2140-0x217f has been reserved
[ 0.821663] system 00:06: ioport range 0x2100-0x213f has been reserved
[ 0.821670] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.821677] system 00:06: ioport range 0x295-0x296 has been reserved
[ 0.857888] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.857894] pci 0000:00:09.0: IO window: disabled
[ 0.857902] pci 0000:00:09.0: MEM window: 0xd3300000-0xd33fffff
[ 0.857908] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.857917] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02
[ 0.857925] pci 0000:00:0c.0: IO window: 0x1000-0x1fff
[ 0.857938] pci 0000:00:0c.0: MEM window: 0xd0000000-0xd30fffff
[ 0.857950] pci 0000:00:0c.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.857968] pci 0000:00:15.0: PCI bridge, secondary bus 0000:03
[ 0.857972] pci 0000:00:15.0: IO window: disabled
[ 0.857986] pci 0000:00:15.0: MEM window: 0xd3200000-0xd32fffff
[ 0.857996] pci 0000:00:15.0: PREFETCH window: disabled
[ 0.858013] pci 0000:00:16.0: PCI bridge, secondary bus 0000:04
[ 0.858017] pci 0000:00:16.0: IO window: disabled
[ 0.858030] pci 0000:00:16.0: MEM window: 0xd3100000-0xd31fffff
[ 0.858041] pci 0000:00:16.0: PREFETCH window: disabled
[ 0.858059] pci 0000:00:09.0: enabling device (0000 -> 0002)
[ 0.858069] pci 0000:00:09.0: setting latency timer to 64
[ 0.859593] ACPI: PCI Interrupt Link [Z003] enabled at IRQ 23
[ 0.859603] pci 0000:00:0c.0: PCI INT A -> Link[Z003] -> GSI 23 (level, low) -> IRQ 23
[ 0.859616] pci 0000:00:0c.0: setting latency timer to 64
[ 0.861151] ACPI: PCI Interrupt Link [Z00F] enabled at IRQ 22
[ 0.861161] pci 0000:00:15.0: PCI INT A -> Link[Z00F] -> GSI 22 (level, low) -> IRQ 22
[ 0.861174] pci 0000:00:15.0: setting latency timer to 64
[ 0.862686] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 21
[ 0.862695] pci 0000:00:16.0: PCI INT A -> Link[Z00J] -> GSI 21 (level, low) -> IRQ 21
[ 0.862709] pci 0000:00:16.0: setting latency timer to 64
[ 0.862717] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.862723] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.862728] pci_bus 0000:01: resource 0 mem: [0x0-0x0]
[ 0.862733] pci_bus 0000:01: resource 1 mem: [0xd3300000-0xd33fffff]
[ 0.862738] pci_bus 0000:01: resource 2 mem: [0x0-0x0]
[ 0.862743] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.862748] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.862753] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.862758] pci_bus 0000:02: resource 1 mem: [0xd0000000-0xd30fffff]
[ 0.862764] pci_bus 0000:02: resource 2 mem: [0xc0000000-0xcfffffff]
[ 0.862769] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[ 0.862774] pci_bus 0000:03: resource 0 mem: [0x0-0x0]
[ 0.862778] pci_bus 0000:03: resource 1 mem: [0xd3200000-0xd32fffff]
[ 0.862784] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
[ 0.862788] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[ 0.862793] pci_bus 0000:04: resource 0 mem: [0x0-0x0]
[ 0.862797] pci_bus 0000:04: resource 1 mem: [0xd3100000-0xd31fffff]
[ 0.862803] pci_bus 0000:04: resource 2 mem: [0x0-0x0]
[ 0.862807] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
[ 0.862849] NET: Registered protocol family 2
[ 0.980115] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.980532] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.981038] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[ 0.981634] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.981640] TCP reno registered
[ 1.010163] NET: Registered protocol family 1
[ 1.013882] Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 1.015682] Initializing RT-Tester: OK
[ 1.015827] audit: initializing netlink socket (enabled)
[ 1.015885] type=2000 audit(1239634697.010:1): initialized
[ 1.027465] highmem bounce pool size: 64 pages
[ 1.027475] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.049367] fuse init (API version 7.11)
[ 1.050161] msgmni has been set to 1714
[ 1.050476] SELinux: Registering netfilter hooks
[ 1.051421] alg: No test for stdrng (krng)
[ 1.051441] io scheduler noop registered
[ 1.051857] io scheduler cfq registered (default)
[ 1.072734] pci 0000:02:00.0: Boot video device
[ 1.075010] vesafb: framebuffer at 0xd1000000, mapped to 0xf8080000, using 14336k, total 14336k
[ 1.075019] vesafb: mode is 1920x1200x32, linelength=7680, pages=1
[ 1.075024] vesafb: protected mode interface info at c000:bd10
[ 1.075029] vesafb: pmi: set display start = c00cbd73, set palette = c00cbdce
[ 1.075034] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 1.075060] vesafb: scrolling: redraw
[ 1.075064] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.171830] Console: switching to colour frame buffer device 240x75
[ 1.259664] fb0: VESA VGA frame buffer device
[ 1.278063] loop: module loaded
[ 1.278271] Linux video capture interface: v2.00
[ 1.278885] input: Macintosh mouse button emulation as /class/input/input0
[ 1.279738] Driver 'sd' needs updating - please use bus_type methods
[ 1.280289] Driver 'sr' needs updating - please use bus_type methods
[ 1.280991] ahci 0000:00:0b.0: version 3.0
[ 1.282828] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 20
[ 1.283194] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 20 (level, low) -> IRQ 20
[ 1.283746] ahci 0000:00:0b.0: irq 24 for MSI/MSI-X
[ 1.284116] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl IDE mode
[ 1.284614] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pmp pio slum part
[ 1.285065] ahci 0000:00:0b.0: setting latency timer to 64
[ 1.285612] scsi0 : ahci
[ 1.286433] scsi1 : ahci
[ 1.286811] scsi2 : ahci
[ 1.287193] scsi3 : ahci
[ 1.287598] scsi4 : ahci
[ 1.287991] scsi5 : ahci
[ 1.288819] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 24
[ 1.289330] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 24
[ 1.289838] ata3: DUMMY
[ 1.289991] ata4: DUMMY
[ 1.290144] ata5: DUMMY
[ 1.290297] ata6: DUMMY
[ 2.220010] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.221111] ata1.00: ATA-8: WDC WD1001FALS-40K1B0, 07.00K07, max UDMA/133
[ 2.221535] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.222757] ata1.00: configured for UDMA/133
[ 2.240187] scsi 0:0:0:0: Direct-Access ATA WDC WD1001FALS-4 07.0 PQ: 0 ANSI: 5
[ 2.241124] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 2.241644] sd 0:0:0:0: [sda] Write Protect is off
[ 2.241945] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.242316] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.243021] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 2.243539] sd 0:0:0:0: [sda] Write Protect is off
[ 2.243839] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.244210] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.244776] sda: sda1 sda2 sda3 sda4
[ 2.295626] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.296242] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.220010] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.243319] ata2.00: ATAPI: OPTIARC DVD RW AD-5670S, 2AHC, max UDMA/100, ATAPI AN
[ 3.266478] ata2.00: configured for UDMA/100
[ 3.305646] scsi 1:0:0:0: CD-ROM OPTIARC DVD RW AD-5670S 2AHC PQ: 0 ANSI: 5
[ 3.345513] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[ 3.363411] Uniform CD-ROM driver Revision: 3.20
[ 3.381598] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.399660] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.417741] usbcore: registered new interface driver usblcd
[ 3.435496] usbcore: registered new interface driver usbled
[ 3.453531] PNP: No PS/2 controller found. Probing ports directly.
[ 3.472041] i8042.c: No controller found.
[ 3.520296] mice: PS/2 mouse device common for all mice
[ 3.539409] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[ 3.557652] EDAC MC: Ver: 2.1.0 Apr 12 2009
[ 3.576583] cpuidle: using governor ladder
[ 3.594617] cpuidle: using governor menu
[ 3.615263] usbcore: registered new interface driver hiddev
[ 3.633112] usbcore: registered new interface driver usbhid
[ 3.650622] usbhid: v2.6:USB HID core driver
[ 3.668161] Advanced Linux Sound Architecture Driver Version 1.0.18a.
[ 3.685714] ALSA device list:
[ 3.685716] No soundcards found.
[ 3.720512] oprofile: using NMI interrupt.
[ 3.738078] IPVS: Registered protocols (TCP, AH, ESP)
[ 3.755531] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 3.773040] IPVS: ipvs loaded.
[ 3.790777] Initializing XFRM netlink socket
[ 3.808139] NET: Registered protocol family 17
[ 3.825380] NET: Registered protocol family 15
[ 3.842332] lib80211: common routines for IEEE802.11 drivers
[ 3.859567] lib80211_crypt: registered algorithm 'NULL'
[ 3.876725] lib80211_crypt: registered algorithm 'WEP'
[ 3.876728] lib80211_crypt: registered algorithm 'CCMP'
[ 3.876730] lib80211_crypt: registered algorithm 'TKIP'
[ 3.876743] Using IPI No-Shortcut mode
[ 4.002655] kjournald starting. Commit interval 5 seconds
[ 4.002664] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.002704] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
[ 4.002958] Freeing unused kernel memory: 408k freed
[ 4.539858] SELinux: 8192 avtab hash slots, 145269 rules.
[ 4.665554] SELinux: 8192 avtab hash slots, 145269 rules.
[ 4.873629] SELinux: 7 users, 10 roles, 2688 types, 95 bools, 1 sens, 256 cats
[ 4.891011] SELinux: 74 classes, 145269 rules
[ 4.916504] SELinux: Completing initialization.
[ 4.933727] SELinux: Setting up existing superblocks.
[ 4.963487] SELinux: initialized (dev sda3, type ext3), uses xattr
[ 4.981095] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 4.998845] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 5.016774] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
[ 5.034972] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 5.053151] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
[ 5.071314] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.089436] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 5.107660] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 5.125751] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 5.143796] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 5.161734] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 5.179765] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 5.197501] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 5.215147] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 5.347850] type=1403 audit(1239634701.340:2): policy loaded auid=4294967295 ses=4294967295
[ 6.209975] applesmc: Apple iMac detected:
[ 6.227910] applesmc: - Model without accelerometer
[ 6.246858] applesmc: - Model without light sensors and backlight
[ 6.265710] applesmc: - Model with 9 temperature sensors
[ 6.284689] applesmc: device successfully initialized.
[ 6.303981] applesmc: 3 fans found.
[ 6.322409] applesmc: driver successfully loaded.
[ 6.349489] ACPI: SSDT BFECAA98, 02FE (r1 APPLE Cpu0Ist 3000 INTL 20061109)
[ 6.369532] ACPI: SSDT BFEC8C18, 028F (r1 APPLE Cpu0Cst 3001 INTL 20061109)
[ 6.390706] Monitor-Mwait will be used to enter C-1 state
[ 6.390715] Monitor-Mwait will be used to enter C-2 state
[ 6.390722] Monitor-Mwait will be used to enter C-3 state
[ 6.391400] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 6.411320] processor ACPI_CPU:00: registered as cooling_device0
[ 6.431306] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 6.453199] ACPI: SSDT BFEC9F18, 00C8 (r1 APPLE Cpu1Ist 3000 INTL 20061109)
[ 6.474677] ACPI: SSDT BFEC8F18, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20061109)
[ 6.496837] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 6.499995] Marking TSC unstable due to TSC halts in idle
[ 6.536242] processor ACPI_CPU:01: registered as cooling_device1
[ 6.555927] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 6.631680] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.683267] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 6.704431] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 6.725493] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 6.746597] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 6.790645] arp_tables: (C) 2002 David S. Miller
[ 6.840741] usbcore: registered new interface driver isight_firmware
[ 6.880962] usbcore: registered new interface driver uvcvideo
[ 6.902954] USB Video Class driver (v0.1.0)
[ 6.941017] ipmi message handler version 39.2
[ 6.965391] IPMI Watchdog: driver initialized
[ 6.996863] Bluetooth: Core ver 2.14
[ 7.019271] NET: Registered protocol family 31
[ 7.041606] Bluetooth: HCI device and connection manager initialized
[ 7.064099] Bluetooth: HCI socket layer initialized
[ 7.090672] Bluetooth: L2CAP ver 2.11
[ 7.113145] Bluetooth: L2CAP socket layer initialized
[ 7.148391] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 7.186416] Bluetooth: Generic Bluetooth USB driver ver 0.4
[ 7.209626] usbcore: registered new interface driver btusb
[ 7.240093] Bluetooth: RFCOMM socket layer initialized
[ 7.263192] Bluetooth: RFCOMM TTY layer initialized
[ 7.286313] Bluetooth: RFCOMM ver 1.10
[ 7.316648] Bluetooth: SCO (Voice Link) ver 0.6
[ 7.339656] Bluetooth: SCO socket layer initialized
[ 7.366879] Bluetooth: HCI UART driver ver 2.2
[ 7.390135] Bluetooth: HCI H4 protocol initialized
[ 7.413377] Bluetooth: HCI BCSP protocol initialized
[ 7.531768] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.816410] udev: starting version 140
[ 7.839692] udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
[ 7.958263] type=1400 audit(1239634703.952:3): avc: denied { search } for pid=961 comm="modprobe" name="/" dev=tmpfs ino=1446 scontext=system_u:system_r:insmod_t:s0-s0:c0.c255 tcontext=system_u:object_r:tmpfs_t:s0 tclass=dir
[ 7.983961] type=1300 audit(1239634703.952:3): arch=40000003 syscall=5 success=no exit=-20 a0=b7f92045 a1=10800 a2=28 a3=804eb0e items=0 ppid=912 pid=961 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/sbin/modprobe" subj=system_u:system_r:insmod_t:s0-s0:c0.c255 key=(null)
[ 8.036530] Clocksource tsc unstable (delta = -193110504 ns)
[ 8.418038] input: Power Button (FF) as /class/input/input1
[ 8.471543] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.499798] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 19
[ 8.526334] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
[ 8.553285] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 8.553289] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 8.580104] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 8.580211] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 8.607265] ehci_hcd 0000:00:04.1: debug port 1
[ 8.634098] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 8.634127] ehci_hcd 0000:00:04.1: irq 19, io mem 0xd3489200
[ 8.680182] ACPI: Power Button (FF) [PWRF]
[ 8.706990] input: Power Button (CM) as /class/input/input2
[ 8.733575] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 8.760256] usb usb1: configuration #1 chosen from 1 choice
[ 8.786909] hub 1-0:1.0: USB hub found
[ 8.813177] hub 1-0:1.0: 7 ports detected
[ 8.840397] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 18
[ 8.865801] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 18 (level, low) -> IRQ 18
[ 8.891576] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 8.891580] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 8.917260] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 8.943055] ehci_hcd 0000:00:06.1: debug port 1
[ 8.968723] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported
[ 8.968752] ehci_hcd 0000:00:06.1: irq 18, io mem 0xd3489100
[ 9.020101] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 9.044575] usb usb2: configuration #1 chosen from 1 choice
[ 9.045369] ACPI: Power Button (CM) [PWRB]
[ 9.045516] input: Sleep Button (CM) as /class/input/input3
[ 9.117185] hub 2-0:1.0: USB hub found
[ 9.117199] hub 2-0:1.0: 5 ports detected
[ 9.212784] ACPI: Sleep Button (CM) [SLPB]
[ 9.236789] Linux agpgart interface v0.103
[ 9.261837] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 9.305476] ohci1394 0000:04:00.0: PCI INT A -> Link[Z00J] -> GSI 21 (level, low) -> IRQ 21
[ 9.329785] ohci1394 0000:04:00.0: setting latency timer to 64
[ 9.384704] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[d3100000-d31007ff] Max Packet=[4096] IR/IT contexts=[8/8]
[ 9.456507] nvidia: module license 'NVIDIA' taints kernel.
[ 9.485894] usb 1-4: invalid descriptor for config index 0: type = 0x2, length = 3
[ 9.510049] usb 1-4: can't read configurations, error -22
[ 9.660041] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 9.761608] ACPI Exception (evregion-0422): AE_ERROR, Returned by Handler for [PCI_Config] [20081204]
[ 9.785866] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.RP01.GFX0._PS0] (Node f703ecc0), AE_ERROR
[ 9.810307] ACPI: Transitioning device [GFX0] to D0
[ 9.834227] nvidia 0000:02:00.0: PCI INT A -> Link[Z003] -> GSI 23 (level, low) -> IRQ 23
[ 9.858341] nvidia 0000:02:00.0: setting latency timer to 64
[ 9.858634] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.29 Wed Feb 4 23:44:25 PST 2009
[ 9.873880] usb 1-4: configuration #1 chosen from 1 choice
[ 9.874670] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8502)
[ 9.875916] input: Built-in iSight as /class/input/input4
[ 10.013575] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
[ 10.037896] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
[ 10.062803] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 10.360074] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 10.539045] usb 2-2: configuration #1 chosen from 1 choice
[ 10.564909] hub 2-2:1.0: USB hub found
[ 10.590269] hub 2-2:1.0: 3 ports detected
[ 10.742840] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0023dffffe8cd104]
[ 10.890280] usb 2-2.1: new high speed USB device using ehci_hcd and address 4
[ 11.021895] usb 2-2.1: configuration #1 chosen from 1 choice
[ 11.047500] hub 2-2.1:1.0: USB hub found
[ 11.072402] hub 2-2.1:1.0: 4 ports detected
[ 11.098151] type=1400 audit(1239634707.096:4): avc: denied { search } for pid=1413 comm="modprobe" name="/" dev=tmpfs ino=1446 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=dir
[ 11.124183] type=1300 audit(1239634707.096:4): arch=40000003 syscall=5 success=no exit=-20 a0=b7fd7045 a1=10800 a2=28 a3=804eb0e items=0 ppid=1412 pid=1413 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/sbin/modprobe" subj=system_u:system_r:insmod_t:s0 key=(null)
[ 11.170271] usb 2-2.2: new low speed USB device using ehci_hcd and address 5
[ 11.286798] usb 2-2.2: configuration #1 chosen from 1 choice
[ 11.318281] input: Apple Inc. Apple Keyboard as /class/input/input5
[ 11.420288] generic-usb 0003:05AC:021D.0001: input: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-0000:00:06.1-2.2/input0
[ 11.451512] input: Apple Inc. Apple Keyboard as /class/input/input6
[ 11.560141] generic-usb 0003:05AC:021D.0002: input: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-0000:00:06.1-2.2/input1
[ 11.820294] usb 2-2.3: new low speed USB device using ehci_hcd and address 6
[ 11.956052] usb 2-2.3: configuration #1 chosen from 1 choice
[ 11.986117] input: Mitsumi Electric Apple Optical USB Mouse as /class/input/input7
[ 12.100176] apple 0003:05AC:0304.0003: input: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:06.1-2.3/input0
[ 12.176050] Adding 300772k swap on /dev/sda4. Priority:1 extents:1 across:300772k
[ 12.867858] EXT3 FS on sda3, internal journal
[ 12.998443] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 17.927947] ndiswrapper version 1.54-2.6.27.7 loaded (smp=yes, preempt=no)
[ 18.207206] ndiswrapper: driver bcmwl5 (Broadcom,03/21/2008, 4.170.77.3) loaded
[ 18.234433] ndiswrapper 0000:03:00.0: power state changed by ACPI to D0
[ 18.260848] ndiswrapper 0000:03:00.0: PCI INT A -> Link[Z00F] -> GSI 22 (level, low) -> IRQ 22
[ 18.287675] ndiswrapper 0000:03:00.0: power state changed by ACPI to D0
[ 18.314458] ndiswrapper 0000:03:00.0: setting latency timer to 64
[ 18.327840] ndiswrapper: using IRQ 22
[ 18.572734] wlan0 (ndiswrapper): not using net_device_ops yet
[ 18.599768] wlan0: ethernet device 00:1f:f3:bd:f0:98 using NDIS driver: bcmwl5, version: 0x4aa4d03, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:432B.5.conf
[ 18.627428] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 18.658156] usbcore: registered new interface driver ndiswrapper
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b2)
Subsystem: nVidia Corporation Device cb79
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 2000 [size=256]
00:03.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.2 SMBus: nVidia Corporation MCP79 SMBus (rev b1)
Subsystem: nVidia Corporation Device cb79
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 2180 [size=64]
Region 4: I/O ports at 2140 [size=64]
Region 5: I/O ports at 2100 [size=64]
Capabilities: <access denied>
00:03.3 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.4 RAM memory: nVidia Corporation Device 0a98 (rev b1)
Subsystem: nVidia Corporation Device cb79
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.5 Co-processor: nVidia Corporation MCP79 Co-processor (rev b1)
Subsystem: nVidia Corporation Device cb79
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 14
Region 0: Memory at d3400000 (32-bit, non-prefetchable) [size=512K]
00:04.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation Device cb79
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d3488000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:04.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1) (prog-if 20 [EHCI])
Subsystem: nVidia Corporation Device cb79
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 19
Region 0: Memory at d3489200 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:06.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation Device cb79
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 7
Region 0: Memory at d3487000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:06.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1) (prog-if 20 [EHCI])
Subsystem: nVidia Corporation Device cb79
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 18
Region 0: Memory at d3489100 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
Subsystem: nVidia Corporation Device cb79
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d3480000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:09.0 PCI bridge: nVidia Corporation MCP79 PCI Bridge (rev b1) (prog-if 01 [Subtractive decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d3300000-d33fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:0a.0 Ethernet controller: nVidia Corporation MCP79 Ethernet (rev b1)
Subsystem: nVidia Corporation Device cb79
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 14
Region 0: Memory at d3486000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 21e0 [size=8]
Region 2: Memory at d3489000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at d3489300 (32-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:0b.0 IDE interface: nVidia Corporation MCP79 SATA Controller (rev b1) (prog-if 85 [Master SecO PriO])
Subsystem: nVidia Corporation Device cb79
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 24
Region 0: I/O ports at 21d8 [size=8]
Region 1: I/O ports at 21ec [size=4]
Region 2: I/O ports at 21d0 [size=8]
Region 3: I/O ports at 21e8 [size=4]
Region 4: I/O ports at 21c0 [size=16]
Region 5: Memory at d3484000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:0c.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d0000000-d30fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:15.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d3200000-d32fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:16.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d3100000-d31fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
02:00.0 VGA compatible controller: nVidia Corporation Device 062e (rev a1) (prog-if 00 [VGA controller])
Subsystem: Apple Computer Inc. Device 0605
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 1000 [size=128]
[virtual] Expansion ROM at d3000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia
03:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
Subsystem: Apple Computer Inc. Device 008e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d3200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ndiswrapper
04:00.0 FireWire (IEEE 1394): Agere Systems FW643 PCI Express1394b Controller (PHY/Link) (rev 07) (prog-if 10 [OHCI])
Subsystem: Agere Systems Device 5900
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d3100000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394