Weird freezes with 2.6.28/29

From: Chris Howie
Date: Tue Apr 07 2009 - 18:51:59 EST

Next message: Jeff Garzik: "[PATCH v2] osdblk: a Linux block device for OSD objects"
Previous message: David Brownell: "Re: [PATCH] MTD-NAND: Changes to read_page APIs to support NAND_ECC_HW_SYNDROME mode on TI DaVinci DM355"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hello everyone.

I've been running across some bizarre and obnoxious freezes on 2.6.28
and 2.6.29. I will describe my problem and attach an annotated kernel
log indicating where each problem happens.

Upon initial boot, everything seems to be going fine. But early on
the entire system freezes. The only reliable way I've found to
unfreeze it is to press the power button on my laptop.

After that, the system will either boot fine or freeze again later.
If it does freeze, it's when init is starting all my services. Most
of the time it freezes while starting resolvconf. (I don't /think/
that's significant, but who knows.) I can unfreeze it by holding down
pretty much any key on the keyboard. I usually use CTRL since it
doesn't spam the console, but any key works. The moment I release the
key, it freezes again. Once X starts up there are no more freezing
problems. But then it happens again on shutdown. I have to hold a
key until the laptop powers off or it will freeze while init is
killing services.

Aside from some hibernate flakiness that I have come to expect, these
are the only problems I'm having with this kernel version. Is there
any additional information I can supply that will facilitate proper
debugging of this problem?

Thanks!

--
Chris Howie
http://www.chrishowie.com
http://en.wikipedia.org/wiki/User:Crazycomputers

Apr 7 18:39:34 clayton kernel: klogd 1.5.0#5, log source = /proc/kmsg started.
Apr 7 18:39:34 clayton kernel: [ 0.000000] Initializing cgroup subsys cpuset
Apr 7 18:39:34 clayton kernel: [ 0.000000] Initializing cgroup subsys cpu
Apr 7 18:39:34 clayton kernel: [ 0.000000] Linux version 2.6.29.1-clayton-amd64 (chris@clayton) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Tue Apr 7 14:20:52 EDT 2009
Apr 7 18:39:34 clayton kernel: [ 0.000000] Command line: root=/dev/sda2 ro
Apr 7 18:39:34 clayton kernel: [ 0.000000] KERNEL supported cpus:
Apr 7 18:39:34 clayton kernel: [ 0.000000] Intel GenuineIntel
Apr 7 18:39:34 clayton kernel: [ 0.000000] AMD AuthenticAMD
Apr 7 18:39:34 clayton kernel: [ 0.000000] Centaur CentaurHauls
Apr 7 18:39:34 clayton kernel: [ 0.000000] BIOS-provided physical RAM map:
Apr 7 18:39:34 clayton kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
Apr 7 18:39:34 clayton kernel: [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
Apr 7 18:39:34 clayton kernel: [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
Apr 7 18:39:34 clayton kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bbf50000 (usable)
Apr 7 18:39:34 clayton kernel: [ 0.000000] BIOS-e820: 00000000bbf50000 - 00000000bbf65000 (ACPI data)
Apr 7 18:39:34 clayton kernel: [ 0.000000] BIOS-e820: 00000000bbf65000 - 00000000bbf66000 (ACPI NVS)
Apr 7 18:39:34 clayton kernel: [ 0.000000] BIOS-e820: 00000000bbf66000 - 00000000c0000000 (reserved)
Apr 7 18:39:34 clayton kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Apr 7 18:39:34 clayton kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Apr 7 18:39:34 clayton kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Apr 7 18:39:34 clayton kernel: [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Apr 7 18:39:34 clayton kernel: [ 0.000000] DMI present.
Apr 7 18:39:34 clayton kernel: [ 0.000000] last_pfn = 0xbbf50 max_arch_pfn = 0x100000000
Apr 7 18:39:34 clayton kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000bbf50000
Apr 7 18:39:34 clayton kernel: [ 0.000000] 0000000000 - 00bbe00000 page 2M
Apr 7 18:39:34 clayton kernel: [ 0.000000] 00bbe00000 - 00bbf50000 page 4k
Apr 7 18:39:34 clayton kernel: [ 0.000000] kernel direct mapping tables up to bbf50000 @ 8000-d000
Apr 7 18:39:34 clayton kernel: [ 0.000000] last_map_addr: bbf50000 end: bbf50000
Apr 7 18:39:34 clayton kernel: [ 0.000000] RAMDISK: 37863000 - 37fef598
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: RSDP 000F8250, 0024 (r2 PTLTD )
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: XSDT BBF5C0CE, 006C (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: FACP BBF649BA, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240)
Apr 7 18:39:34 clayton kernel: [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: DSDT BBF5C13A, 880C (r1 NVIDIA MCP67 6040000 MSFT 3000000)
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: FACS BBF65FC0, 0040
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: TCPA BBF64AAE, 0032 (r1 Phoeni x 6040000 TL 0)
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: SRAT BBF64AE0, 00A0 (r1 AMD HAMMER 6040000 AMD 1)
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: SSDT BBF64B80, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1)
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: MCFG BBF64D86, 003C (r1 PTLTD MCFG 6040000 LTP 0)
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: HPET BBF64DC2, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: APIC BBF64DFA, 0068 (r1 PTLTD ^I APIC 6040000 LTP 0)
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: BOOT BBF64E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: SLIC BBF64E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Apr 7 18:39:34 clayton kernel: [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
Apr 7 18:39:34 clayton kernel: [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
Apr 7 18:39:34 clayton kernel: [ 0.000000] SRAT: Node 0 PXM 0 0-a0000
Apr 7 18:39:34 clayton kernel: [ 0.000000] SRAT: Node 0 PXM 0 100000-c0000000
Apr 7 18:39:34 clayton kernel: [ 0.000000] NUMA: Allocated memnodemap from b000 - c880
Apr 7 18:39:34 clayton kernel: [ 0.000000] NUMA: Using 20 for the hash shift.
Apr 7 18:39:34 clayton kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-00000000bbf50000
Apr 7 18:39:34 clayton kernel: [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
Apr 7 18:39:34 clayton kernel: [ 0.000000] bootmap [000000000000d000 - 00000000000247ef] pages 18
Apr 7 18:39:34 clayton kernel: [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bbf50000]
Apr 7 18:39:34 clayton kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Apr 7 18:39:34 clayton kernel: [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
Apr 7 18:39:34 clayton kernel: [ 0.000000] #2 [0000200000 - 00007187bc] TEXT DATA BSS ==> [0000200000 - 00007187bc]
Apr 7 18:39:34 clayton kernel: [ 0.000000] #3 [0037863000 - 0037fef598] RAMDISK ==> [0037863000 - 0037fef598]
Apr 7 18:39:34 clayton kernel: [ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
Apr 7 18:39:34 clayton kernel: [ 0.000000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
Apr 7 18:39:34 clayton kernel: [ 0.000000] #6 [000000b000 - 000000c880] MEMNODEMAP ==> [000000b000 - 000000c880]
Apr 7 18:39:34 clayton kernel: [ 0.000000] found SMP MP-table at [ffff8800000f8220] 000f8220
Apr 7 18:39:34 clayton kernel: [ 0.000000] [ffffe20000000000-ffffe200029fffff] PMD -> [ffff880001200000-ffff880003bfffff] on node 0
Apr 7 18:39:34 clayton kernel: [ 0.000000] Zone PFN ranges:
Apr 7 18:39:34 clayton kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000
Apr 7 18:39:34 clayton kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
Apr 7 18:39:34 clayton kernel: [ 0.000000] Normal 0x00100000 -> 0x00100000
Apr 7 18:39:34 clayton kernel: [ 0.000000] Movable zone start PFN for each node
Apr 7 18:39:34 clayton kernel: [ 0.000000] early_node_map[2] active PFN ranges
Apr 7 18:39:34 clayton kernel: [ 0.000000] 0: 0x00000000 -> 0x0000009e
Apr 7 18:39:34 clayton kernel: [ 0.000000] 0: 0x00000100 -> 0x000bbf50
Apr 7 18:39:34 clayton kernel: [ 0.000000] On node 0 totalpages: 769774
Apr 7 18:39:34 clayton kernel: [ 0.000000] DMA zone: 56 pages used for memmap
Apr 7 18:39:34 clayton kernel: [ 0.000000] DMA zone: 1411 pages reserved
Apr 7 18:39:34 clayton kernel: [ 0.000000] DMA zone: 2531 pages, LIFO batch:0
Apr 7 18:39:34 clayton kernel: [ 0.000000] DMA32 zone: 10470 pages used for memmap
Apr 7 18:39:34 clayton kernel: [ 0.000000] DMA32 zone: 755306 pages, LIFO batch:31
Apr 7 18:39:34 clayton kernel: [ 0.000000] Detected use of extended apic ids on hypertransport bus
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Apr 7 18:39:34 clayton kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: IRQ0 used by override.
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: IRQ2 used by override.
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: IRQ9 used by override.
Apr 7 18:39:34 clayton kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Apr 7 18:39:34 clayton kernel: [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
Apr 7 18:39:34 clayton kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Apr 7 18:39:34 clayton kernel: [ 0.000000] nr_irqs_gsi: 24
Apr 7 18:39:34 clayton kernel: [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
Apr 7 18:39:34 clayton kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
Apr 7 18:39:34 clayton kernel: [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
Apr 7 18:39:34 clayton kernel: [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
Apr 7 18:39:34 clayton kernel: [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
Apr 7 18:39:34 clayton kernel: [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data
Apr 7 18:39:34 clayton kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 757837
Apr 7 18:39:34 clayton kernel: [ 0.000000] Policy zone: DMA32
Apr 7 18:39:34 clayton kernel: [ 0.000000] Kernel command line: root=/dev/sda2 ro
Apr 7 18:39:34 clayton kernel: [ 0.000000] Initializing CPU#0
Apr 7 18:39:34 clayton kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
Apr 7 18:39:34 clayton kernel: [ 0.000000] Extended CMOS year: 2000
Apr 7 18:39:34 clayton kernel: [ 0.000000] Fast TSC calibration using PIT
Apr 7 18:39:34 clayton kernel: [ 0.000000] Detected 1999.954 MHz processor.
Apr 7 18:39:34 clayton kernel: [ 0.004000] spurious 8259A interrupt: IRQ7.
Apr 7 18:39:34 clayton kernel: [ 0.004000] Console: colour VGA+ 80x25
Apr 7 18:39:34 clayton kernel: [ 0.004000] console [tty0] enabled
Apr 7 18:39:34 clayton kernel: [ 0.004000] Checking aperture...
Apr 7 18:39:34 clayton kernel: [ 0.004000] No AGP bridge found
Apr 7 18:39:34 clayton kernel: [ 0.004000] Node 0: aperture @ 8090000000 size 32 MB
Apr 7 18:39:34 clayton kernel: [ 0.004000] Aperture beyond 4GB. Ignoring.
Apr 7 18:39:34 clayton kernel: [ 0.004000] Memory: 3022808k/3079488k available (2482k kernel code, 392k absent, 56288k reserved, 1253k data, 536k init)
Apr 7 18:39:34 clayton kernel: [ 0.004000] hpet clockevent registered
Apr 7 18:39:34 clayton kernel: [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Apr 7 18:39:34 clayton kernel: [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.90 BogoMIPS (lpj=7999816)
Apr 7 18:39:34 clayton kernel: [ 0.004000] Security Framework initialized
Apr 7 18:39:34 clayton kernel: [ 0.004000] SELinux: Disabled at boot.
Apr 7 18:39:34 clayton kernel: [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Apr 7 18:39:34 clayton kernel: [ 0.004314] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Apr 7 18:39:34 clayton kernel: [ 0.005993] Mount-cache hash table entries: 256
Apr 7 18:39:34 clayton kernel: [ 0.006238] Initializing cgroup subsys ns
Apr 7 18:39:34 clayton kernel: [ 0.006300] Initializing cgroup subsys cpuacct
Apr 7 18:39:34 clayton kernel: [ 0.006361] Initializing cgroup subsys devices
Apr 7 18:39:34 clayton kernel: [ 0.006443] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Apr 7 18:39:34 clayton kernel: [ 0.006507] CPU: L2 Cache: 512K (64 bytes/line)
Apr 7 18:39:34 clayton kernel: [ 0.006568] CPU 0/0x0 -> Node 0
Apr 7 18:39:34 clayton kernel: [ 0.006627] tseg: 00bbf80000
Apr 7 18:39:34 clayton kernel: [ 0.006629] CPU: Physical Processor ID: 0
Apr 7 18:39:34 clayton kernel: [ 0.006688] CPU: Processor Core ID: 0
Apr 7 18:39:34 clayton kernel: [ 0.006756] using C1E aware idle routine
Apr 7 18:39:34 clayton kernel: [ 0.008485] ACPI: Core revision 20081204
Apr 7 18:39:34 clayton kernel: [ 0.020065] Setting APIC routing to flat
Apr 7 18:39:34 clayton kernel: [ 0.020701] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Apr 7 18:39:34 clayton kernel: [ 0.062458] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
Apr 7 18:39:34 clayton kernel: [ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000
Apr 7 18:39:34 clayton kernel: [ 0.004000] Initializing CPU#1
Apr 7 18:39:34 clayton kernel: [ 0.004000] Calibrating delay using timer specific routine.. 4000.38 BogoMIPS (lpj=8000764)
Apr 7 18:39:34 clayton kernel: [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Apr 7 18:39:34 clayton kernel: [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
Apr 7 18:39:34 clayton kernel: [ 0.004000] CPU 1/0x1 -> Node 0
Apr 7 18:39:34 clayton kernel: [ 0.004000] CPU: Physical Processor ID: 0
Apr 7 18:39:34 clayton kernel: [ 0.004000] CPU: Processor Core ID: 1
Apr 7 18:39:34 clayton kernel: [ 0.148176] CPU1: <6>System has AMD C1E enabled
Apr 7 18:39:34 clayton kernel: [ 0.004000] Switch to broadcast mode on CPU1
Apr 7 18:39:34 clayton kernel: [ 0.148765] AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
Apr 7 18:39:34 clayton kernel: [ 0.148881] Brought up 2 CPUs
Apr 7 18:39:34 clayton kernel: [ 0.148940] Total of 2 processors activated (8000.29 BogoMIPS).
Apr 7 18:39:34 clayton kernel: [ 0.149089] CPU0 attaching sched-domain:
Apr 7 18:39:34 clayton kernel: [ 0.149091] domain 0: span 0-1 level CPU
Apr 7 18:39:34 clayton kernel: [ 0.149094] groups: 0 1
Apr 7 18:39:34 clayton kernel: [ 0.149099] CPU1 attaching sched-domain:
Apr 7 18:39:34 clayton kernel: [ 0.149100] domain 0: span 0-1 level CPU
Apr 7 18:39:34 clayton kernel: [ 0.149102] groups: 1 0
Apr 7 18:39:34 clayton kernel: [ 0.149170] Switch to broadcast mode on CPU0
Apr 7 18:39:34 clayton kernel: [ 0.149170] net_namespace: 1888 bytes
Apr 7 18:39:34 clayton kernel: [ 0.149170] Booting paravirtualized kernel on bare hardware
Apr 7 18:39:34 clayton kernel: [ 0.149170] NET: Registered protocol family 16
Apr 7 18:39:34 clayton kernel: [ 0.149170] node 0 link 0: io port [1000, fffff]
Apr 7 18:39:34 clayton kernel: [ 0.149170] TOM: 00000000c0000000 aka 3072M
Apr 7 18:39:34 clayton kernel: [ 0.149170] node 0 link 0: mmio [a0000, bffff]
Apr 7 18:39:34 clayton kernel: [ 0.149170] node 0 link 0: mmio [c0000000, dfffffff]
Apr 7 18:39:34 clayton kernel: [ 0.149170] node 0 link 0: mmio [e0000000, efffffff]
Apr 7 18:39:34 clayton kernel: [ 0.149170] node 0 link 0: mmio [f0000000, fe0bffff]
Apr 7 18:39:34 clayton kernel: [ 0.149170] bus: [00,ff] on node 0 link 0
Apr 7 18:39:34 clayton kernel: [ 0.149170] bus: 00 index 0 io port: [0, ffff]
Apr 7 18:39:34 clayton kernel: [ 0.149170] bus: 00 index 1 mmio: [a0000, bffff]
Apr 7 18:39:34 clayton kernel: [ 0.149170] bus: 00 index 2 mmio: [c0000000, fcffffffff]
Apr 7 18:39:34 clayton kernel: [ 0.149170] ACPI: bus type pci registered
Apr 7 18:39:34 clayton kernel: [ 0.149170] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4
Apr 7 18:39:34 clayton kernel: [ 0.149170] PCI: MCFG area at e0000000 reserved in E820
Apr 7 18:39:34 clayton kernel: [ 0.149170] PCI: Using MMCONFIG at e0000000 - e04fffff
Apr 7 18:39:34 clayton kernel: [ 0.149170] PCI: Using configuration type 1 for base access
Apr 7 18:39:34 clayton kernel: [ 0.152071] bio: create slab <bio-0> at 0
Apr 7 18:39:34 clayton kernel: [ 0.152739] ACPI: EC: Enabling special treatment for EC from MSI.
Apr 7 18:39:34 clayton kernel: [ 0.152803] ACPI: EC: Look up EC in DSDT
Apr 7 18:39:34 clayton kernel: [ 0.156998] ACPI: BIOS _OSI(Linux) query ignored
Apr 7 18:39:34 clayton kernel: [ 0.158051] ACPI: Interpreter enabled
Apr 7 18:39:34 clayton kernel: [ 0.158113] ACPI: (supports S0 S3 S4 S5)
Apr 7 18:39:34 clayton kernel: [ 0.158366] ACPI: Using IOAPIC for interrupt routing
Apr 7 18:39:34 clayton kernel: [ 0.158487] ACPI: EC: non-query interrupt received, switching to interrupt mode
Apr 7 18:39:34 clayton kernel: [ 0.172158] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
Apr 7 18:39:34 clayton kernel: [ 0.172158] ACPI: EC: driver started in interrupt mode
Apr 7 18:39:34 clayton kernel: [ 0.172244] ACPI: No dock devices found.
Apr 7 18:39:34 clayton kernel: [ 0.172411] ACPI: PCI Root Bridge [PCI0] (0000:00)
Apr 7 18:39:34 clayton kernel: [ 0.172521] pci 0000:00:01.1: reg 10 io port: [0x3080-0x30bf]
Apr 7 18:39:34 clayton kernel: [ 0.172521] pci 0000:00:01.1: reg 20 io port: [0x3040-0x307f]
Apr 7 18:39:34 clayton kernel: [ 0.172521] pci 0000:00:01.1: reg 24 io port: [0x3000-0x303f]
Apr 7 18:39:34 clayton kernel: [ 0.172521] pci 0000:00:01.1: PME# supported from D3hot D3cold
Apr 7 18:39:34 clayton kernel: [ 0.172521] pci 0000:00:01.1: PME# disabled
Apr 7 18:39:34 clayton kernel: [ 0.172521] pci 0000:00:01.3: reg 10 32bit mmio: [0xf6200000-0xf627ffff]
Apr 7 18:39:34 clayton kernel: [ 0.172521] pci 0000:00:02.0: reg 10 32bit mmio: [0xf6486000-0xf6486fff]
Apr 7 18:39:34 clayton kernel: [ 0.172521] pci 0000:00:02.0: supports D1 D2
Apr 7 18:39:34 clayton kernel: [ 0.172521] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 7 18:39:34 clayton kernel: [ 0.172574] pci 0000:00:02.0: PME# disabled
Apr 7 18:39:34 clayton kernel: [ 0.172654] pci 0000:00:02.1: reg 10 32bit mmio: [0xf6489000-0xf64890ff]
Apr 7 18:39:34 clayton kernel: [ 0.172681] pci 0000:00:02.1: supports D1 D2
Apr 7 18:39:34 clayton kernel: [ 0.172683] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
Apr 7 18:39:34 clayton kernel: [ 0.172747] pci 0000:00:02.1: PME# disabled
Apr 7 18:39:34 clayton kernel: [ 0.172831] pci 0000:00:04.0: reg 10 32bit mmio: [0xf6487000-0xf6487fff]
Apr 7 18:39:34 clayton kernel: [ 0.172854] pci 0000:00:04.0: supports D1 D2
Apr 7 18:39:34 clayton kernel: [ 0.172856] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 7 18:39:34 clayton kernel: [ 0.172920] pci 0000:00:04.0: PME# disabled
Apr 7 18:39:34 clayton kernel: [ 0.173000] pci 0000:00:04.1: reg 10 32bit mmio: [0xf6489400-0xf64894ff]
Apr 7 18:39:34 clayton kernel: [ 0.173027] pci 0000:00:04.1: supports D1 D2
Apr 7 18:39:34 clayton kernel: [ 0.173029] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
Apr 7 18:39:34 clayton kernel: [ 0.173093] pci 0000:00:04.1: PME# disabled
Apr 7 18:39:34 clayton kernel: [ 0.173185] pci 0000:00:06.0: reg 20 io port: [0x30c0-0x30cf]
Apr 7 18:39:34 clayton kernel: [ 0.173222] pci 0000:00:07.0: reg 10 32bit mmio: [0xf6480000-0xf6483fff]
Apr 7 18:39:34 clayton kernel: [ 0.173248] pci 0000:00:07.0: PME# supported from D3hot D3cold
Apr 7 18:39:34 clayton kernel: [ 0.173311] pci 0000:00:07.0: PME# disabled
Apr 7 18:39:34 clayton kernel: [ 0.173427] pci 0000:00:09.0: reg 10 io port: [0x30f0-0x30f7]
Apr 7 18:39:34 clayton kernel: [ 0.173427] pci 0000:00:09.0: reg 14 io port: [0x30e4-0x30e7]
Apr 7 18:39:34 clayton kernel: [ 0.173427] pci 0000:00:09.0: reg 18 io port: [0x30e8-0x30ef]
Apr 7 18:39:34 clayton kernel: [ 0.173427] pci 0000:00:09.0: reg 1c io port: [0x30e0-0x30e3]
Apr 7 18:39:34 clayton kernel: [ 0.173427] pci 0000:00:09.0: reg 20 io port: [0x30d0-0x30df]
Apr 7 18:39:34 clayton kernel: [ 0.173427] pci 0000:00:09.0: reg 24 32bit mmio: [0xf6484000-0xf6485fff]
Apr 7 18:39:34 clayton kernel: [ 0.173427] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf6488000-0xf6488fff]
Apr 7 18:39:34 clayton kernel: [ 0.173427] pci 0000:00:0a.0: reg 14 io port: [0x30f8-0x30ff]
Apr 7 18:39:34 clayton kernel: [ 0.173427] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf6489c00-0xf6489cff]
Apr 7 18:39:34 clayton kernel: [ 0.173427] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf6489800-0xf648980f]
Apr 7 18:39:34 clayton kernel: [ 0.173427] pci 0000:00:0a.0: supports D1 D2
Apr 7 18:39:34 clayton kernel: [ 0.173427] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 7 18:39:34 clayton kernel: [ 0.176031] pci 0000:00:0a.0: PME# disabled
Apr 7 18:39:34 clayton kernel: [ 0.176122] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 7 18:39:34 clayton kernel: [ 0.176186] pci 0000:00:0c.0: PME# disabled
Apr 7 18:39:34 clayton kernel: [ 0.176276] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 7 18:39:34 clayton kernel: [ 0.176339] pci 0000:00:0d.0: PME# disabled
Apr 7 18:39:34 clayton kernel: [ 0.176418] pci 0000:00:12.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff]
Apr 7 18:39:34 clayton kernel: [ 0.176423] pci 0000:00:12.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
Apr 7 18:39:34 clayton kernel: [ 0.176428] pci 0000:00:12.0: reg 1c 64bit mmio: [0xf4000000-0xf4ffffff]
Apr 7 18:39:34 clayton kernel: [ 0.176433] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x01ffff]
Apr 7 18:39:34 clayton kernel: [ 0.176543] pci 0000:02:05.0: reg 10 32bit mmio: [0x000000-0x0007ff]
Apr 7 18:39:34 clayton kernel: [ 0.176575] pci 0000:02:05.0: supports D1 D2
Apr 7 18:39:34 clayton kernel: [ 0.176577] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 7 18:39:34 clayton kernel: [ 0.176642] pci 0000:02:05.0: PME# disabled
Apr 7 18:39:34 clayton kernel: [ 0.176724] pci 0000:02:05.1: reg 10 32bit mmio: [0xf6100800-0xf61008ff]
Apr 7 18:39:34 clayton kernel: [ 0.176756] pci 0000:02:05.1: supports D1 D2
Apr 7 18:39:34 clayton kernel: [ 0.176758] pci 0000:02:05.1: PME# supported from D0 D1 D2 D3hot D3cold
Apr 7 18:39:34 clayton kernel: [ 0.176823] pci 0000:02:05.1: PME# disabled
Apr 7 18:39:34 clayton kernel: [ 0.176905] pci 0000:02:05.2: reg 10 32bit mmio: [0xf6100c00-0xf6100cff]
Apr 7 18:39:34 clayton kernel: [ 0.176938] pci 0000:02:05.2: supports D1 D2
Apr 7 18:39:34 clayton kernel: [ 0.176940] pci 0000:02:05.2: PME# supported from D0 D1 D2 D3hot D3cold
Apr 7 18:39:34 clayton kernel: [ 0.177004] pci 0000:02:05.2: PME# disabled
Apr 7 18:39:34 clayton kernel: [ 0.177086] pci 0000:02:05.3: reg 10 32bit mmio: [0xf6101000-0xf61010ff]
Apr 7 18:39:34 clayton kernel: [ 0.177118] pci 0000:02:05.3: supports D1 D2
Apr 7 18:39:34 clayton kernel: [ 0.177120] pci 0000:02:05.3: PME# supported from D0 D1 D2 D3hot D3cold
Apr 7 18:39:34 clayton kernel: [ 0.177184] pci 0000:02:05.3: PME# disabled
Apr 7 18:39:34 clayton kernel: [ 0.177267] pci 0000:02:05.4: reg 10 32bit mmio: [0xf6101400-0xf61014ff]
Apr 7 18:39:34 clayton kernel: [ 0.177299] pci 0000:02:05.4: supports D1 D2
Apr 7 18:39:34 clayton kernel: [ 0.177301] pci 0000:02:05.4: PME# supported from D0 D1 D2 D3hot D3cold
Apr 7 18:39:34 clayton kernel: [ 0.177365] pci 0000:02:05.4: PME# disabled
Apr 7 18:39:34 clayton kernel: [ 0.177453] pci 0000:00:08.0: transparent bridge
Apr 7 18:39:34 clayton kernel: [ 0.177516] pci 0000:00:08.0: bridge 32bit mmio: [0xf6100000-0xf61fffff]
Apr 7 18:39:34 clayton kernel: [ 0.177551] pci 0000:00:0c.0: bridge io port: [0x4000-0x4fff]
Apr 7 18:39:34 clayton kernel: [ 0.177553] pci 0000:00:0c.0: bridge 32bit mmio: [0xf2000000-0xf3ffffff]
Apr 7 18:39:34 clayton kernel: [ 0.177557] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
Apr 7 18:39:34 clayton kernel: [ 0.177592] pci 0000:03:00.0: reg 10 64bit mmio: [0xf6000000-0xf600ffff]
Apr 7 18:39:34 clayton kernel: [ 0.177675] pci 0000:00:0d.0: bridge 32bit mmio: [0xf6000000-0xf60fffff]
Apr 7 18:39:34 clayton kernel: [ 0.177689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Apr 7 18:39:34 clayton kernel: [ 0.177779] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
Apr 7 18:39:34 clayton kernel: [ 0.177801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
Apr 7 18:39:34 clayton kernel: [ 0.177832] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
Apr 7 18:39:34 clayton kernel: [ 0.220222] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10
Apr 7 18:39:34 clayton kernel: [ 0.220695] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
Apr 7 18:39:34 clayton kernel: [ 0.221161] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
Apr 7 18:39:34 clayton kernel: [ 0.221674] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
Apr 7 18:39:34 clayton kernel: [ 0.221859] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
Apr 7 18:39:34 clayton kernel: [ 0.221859] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
Apr 7 18:39:34 clayton kernel: [ 0.221859] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
Apr 7 18:39:34 clayton kernel: [ 0.221868] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
Apr 7 18:39:34 clayton kernel: [ 0.222334] ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
Apr 7 18:39:34 clayton kernel: [ 0.222757] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11
Apr 7 18:39:34 clayton kernel: [ 0.223224] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
Apr 7 18:39:34 clayton kernel: [ 0.223697] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
Apr 7 18:39:34 clayton kernel: [ 0.224206] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10
Apr 7 18:39:34 clayton kernel: [ 0.224675] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10
Apr 7 18:39:34 clayton kernel: [ 0.225142] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.
Apr 7 18:39:34 clayton kernel: [ 0.225655] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11
Apr 7 18:39:34 clayton kernel: [ 0.226124] ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5
Apr 7 18:39:34 clayton kernel: [ 0.226599] ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10
Apr 7 18:39:34 clayton kernel: [ 0.227072] ACPI: PCI Interrupt Link [LPMU] (IRQs *11)
Apr 7 18:39:34 clayton kernel: [ 0.228165] usbcore: registered new interface driver usbfs
Apr 7 18:39:34 clayton kernel: [ 0.228165] usbcore: registered new interface driver hub
Apr 7 18:39:34 clayton kernel: [ 0.232029] usbcore: registered new device driver usb
Apr 7 18:39:34 clayton kernel: [ 0.232086] PCI: Using ACPI for IRQ routing
Apr 7 18:39:34 clayton kernel: [ 0.252117] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
Apr 7 18:39:34 clayton kernel: [ 0.252357] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Apr 7 18:39:34 clayton kernel: [ 0.264020] Switched to high resolution mode on CPU 0
Apr 7 18:39:34 clayton kernel: [ 0.264031] Switched to high resolution mode on CPU 1
Apr 7 18:39:34 clayton kernel: [ 0.269024] pnp: PnP ACPI init
Apr 7 18:39:34 clayton kernel: [ 0.269098] ACPI: bus type pnp registered
Apr 7 18:39:34 clayton kernel: [ 0.276157] pnp: PnP ACPI: found 12 devices
Apr 7 18:39:34 clayton kernel: [ 0.276219] ACPI: ACPI bus type pnp unregistered
Apr 7 18:39:34 clayton kernel: [ 0.276289] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
Apr 7 18:39:34 clayton kernel: [ 0.276357] system 00:03: ioport range 0x1000-0x107f has been reserved
Apr 7 18:39:34 clayton kernel: [ 0.276421] system 00:03: ioport range 0x1080-0x10ff has been reserved
Apr 7 18:39:34 clayton kernel: [ 0.276485] system 00:03: ioport range 0x1400-0x147f has been reserved
Apr 7 18:39:34 clayton kernel: [ 0.276549] system 00:03: ioport range 0x1480-0x14ff has been reserved
Apr 7 18:39:34 clayton kernel: [ 0.276613] system 00:03: ioport range 0x1800-0x187f has been reserved
Apr 7 18:39:34 clayton kernel: [ 0.276677] system 00:03: ioport range 0x1880-0x18ff has been reserved
Apr 7 18:39:34 clayton kernel: [ 0.276744] system 00:04: ioport range 0x360-0x361 has been reserved
Apr 7 18:39:34 clayton kernel: [ 0.276808] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
Apr 7 18:39:34 clayton kernel: [ 0.276877] system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved
Apr 7 18:39:34 clayton kernel: [ 0.276951] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
Apr 7 18:39:34 clayton kernel: [ 0.277024] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
Apr 7 18:39:34 clayton kernel: [ 0.277098] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved
Apr 7 18:39:34 clayton kernel: [ 0.277163] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved
Apr 7 18:39:34 clayton kernel: [ 0.282341] pci 0000:00:08.0: PCI bridge, secondary bus 0000:02
Apr 7 18:39:34 clayton kernel: [ 0.282404] pci 0000:00:08.0: IO window: disabled
Apr 7 18:39:34 clayton kernel: [ 0.282467] pci 0000:00:08.0: MEM window: 0xf6100000-0xf61fffff
Apr 7 18:39:34 clayton kernel: [ 0.282531] pci 0000:00:08.0: PREFETCH window: disabled
Apr 7 18:39:34 clayton kernel: [ 0.282594] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
Apr 7 18:39:34 clayton kernel: [ 0.282656] pci 0000:00:0c.0: IO window: 0x4000-0x4fff
Apr 7 18:39:34 clayton kernel: [ 0.282719] pci 0000:00:0c.0: MEM window: 0xf2000000-0xf3ffffff
Apr 7 18:39:34 clayton kernel: [ 0.282782] pci 0000:00:0c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
Apr 7 18:39:34 clayton kernel: [ 0.282857] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03
Apr 7 18:39:34 clayton kernel: [ 0.282919] pci 0000:00:0d.0: IO window: disabled
Apr 7 18:39:34 clayton kernel: [ 0.282980] pci 0000:00:0d.0: MEM window: 0xf6000000-0xf60fffff
Apr 7 18:39:34 clayton kernel: [ 0.283043] pci 0000:00:0d.0: PREFETCH window: disabled
Apr 7 18:39:34 clayton kernel: [ 0.283111] pci 0000:00:08.0: setting latency timer to 64
Apr 7 18:39:34 clayton kernel: [ 0.283116] pci 0000:00:0c.0: setting latency timer to 64
Apr 7 18:39:34 clayton kernel: [ 0.283120] pci 0000:00:0d.0: setting latency timer to 64
Apr 7 18:39:34 clayton kernel: [ 0.283124] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
Apr 7 18:39:34 clayton kernel: [ 0.283126] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
Apr 7 18:39:34 clayton kernel: [ 0.283129] pci_bus 0000:02: resource 0 mem: [0x0-0x0]
Apr 7 18:39:34 clayton kernel: [ 0.283131] pci_bus 0000:02: resource 1 mem: [0xf6100000-0xf61fffff]
Apr 7 18:39:34 clayton kernel: [ 0.283134] pci_bus 0000:02: resource 2 mem: [0x0-0x0]
Apr 7 18:39:34 clayton kernel: [ 0.283136] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
Apr 7 18:39:34 clayton kernel: [ 0.283138] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
Apr 7 18:39:34 clayton kernel: [ 0.283141] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
Apr 7 18:39:34 clayton kernel: [ 0.283143] pci_bus 0000:04: resource 1 mem: [0xf2000000-0xf3ffffff]
Apr 7 18:39:34 clayton kernel: [ 0.283145] pci_bus 0000:04: resource 2 mem: [0xf0000000-0xf1ffffff]
Apr 7 18:39:34 clayton kernel: [ 0.283148] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
Apr 7 18:39:34 clayton kernel: [ 0.283150] pci_bus 0000:03: resource 0 mem: [0x0-0x0]
Apr 7 18:39:34 clayton kernel: [ 0.283152] pci_bus 0000:03: resource 1 mem: [0xf6000000-0xf60fffff]
Apr 7 18:39:34 clayton kernel: [ 0.283154] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
Apr 7 18:39:34 clayton kernel: [ 0.283157] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
Apr 7 18:39:34 clayton kernel: [ 0.283231] NET: Registered protocol family 2
Apr 7 18:39:34 clayton kernel: [ 0.325213] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Apr 7 18:39:34 clayton kernel: [ 0.327338] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Apr 7 18:39:34 clayton kernel: [ 0.333979] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Apr 7 18:39:34 clayton kernel: [ 0.334836] TCP: Hash tables configured (established 524288 bind 65536)
Apr 7 18:39:34 clayton kernel: [ 0.334902] TCP reno registered
Apr 7 18:39:34 clayton kernel: [ 0.345149] NET: Registered protocol family 1
Apr 7 18:39:34 clayton kernel: [ 0.345331] checking if image is initramfs... it is
Apr 7 18:39:34 clayton kernel: [ 0.917904] Freeing initrd memory: 7729k freed
Apr 7 18:39:34 clayton kernel: [ 0.924195] Simple Boot Flag at 0x36 set to 0x1
Apr 7 18:39:34 clayton kernel: [ 0.925555] audit: initializing netlink socket (disabled)
Apr 7 18:39:34 clayton kernel: [ 0.925629] type=2000 audit(1239143657.925:1): initialized
Apr 7 18:39:34 clayton kernel: [ 0.926065] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Apr 7 18:39:34 clayton kernel: [ 0.926301] VFS: Disk quotas dquot_6.5.2
Apr 7 18:39:34 clayton kernel: [ 0.926399] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Apr 7 18:39:34 clayton kernel: [ 0.926527] msgmni has been set to 5919
Apr 7 18:39:34 clayton kernel: [ 0.926789] alg: No test for stdrng (krng)
Apr 7 18:39:34 clayton kernel: [ 0.926927] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Apr 7 18:39:34 clayton kernel: [ 0.927001] io scheduler noop registered
Apr 7 18:39:34 clayton kernel: [ 0.927061] io scheduler anticipatory registered
Apr 7 18:39:34 clayton kernel: [ 0.927122] io scheduler deadline registered
Apr 7 18:39:34 clayton kernel: [ 0.927208] io scheduler cfq registered (default)
Apr 7 18:39:34 clayton kernel: [ 0.927435] pci 0000:00:00.0: Found enabled HT MSI Mapping
Apr 7 18:39:34 clayton kernel: [ 0.927549] pci 0000:00:00.0: Found enabled HT MSI Mapping
Apr 7 18:39:34 clayton kernel: [ 0.927666] pci 0000:00:00.0: Found enabled HT MSI Mapping
Apr 7 18:39:34 clayton kernel: [ 0.927790] pci 0000:00:00.0: Found enabled HT MSI Mapping
Apr 7 18:39:34 clayton kernel: [ 0.927917] pci 0000:00:00.0: Found enabled HT MSI Mapping
Apr 7 18:39:34 clayton kernel: [ 0.928061] pci 0000:00:00.0: Found enabled HT MSI Mapping
Apr 7 18:39:34 clayton kernel: [ 0.928127] pci 0000:00:12.0: Boot video device
Apr 7 18:39:34 clayton kernel: [ 0.928290] pcieport-driver 0000:00:0c.0: setting latency timer to 64
Apr 7 18:39:34 clayton kernel: [ 0.928329] pcieport-driver 0000:00:0c.0: irq 24 for MSI/MSI-X
Apr 7 18:39:34 clayton kernel: [ 0.928512] pcieport-driver 0000:00:0d.0: setting latency timer to 64
Apr 7 18:39:34 clayton kernel: [ 0.928544] pcieport-driver 0000:00:0d.0: irq 25 for MSI/MSI-X
Apr 7 18:39:34 clayton kernel: [ 0.932990] Linux agpgart interface v0.103
Apr 7 18:39:34 clayton kernel: [ 0.933073] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Apr 7 18:39:34 clayton kernel: [ 0.935209] brd: module loaded
Apr 7 18:39:34 clayton kernel: [ 0.935356] input: Macintosh mouse button emulation as /class/input/input0
Apr 7 18:39:34 clayton kernel: [ 0.935637] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
Apr 7 18:39:34 clayton kernel: [ 0.962907] serio: i8042 KBD port at 0x60,0x64 irq 1
Apr 7 18:39:34 clayton kernel: [ 0.962974] serio: i8042 AUX port at 0x60,0x64 irq 12
Apr 7 18:39:34 clayton kernel: [ 0.973158] mice: PS/2 mouse device common for all mice
Apr 7 18:39:34 clayton kernel: [ 0.973326] rtc_cmos 00:07: RTC can wake from S4
Apr 7 18:39:34 clayton kernel: [ 0.973476] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Apr 7 18:39:34 clayton kernel: [ 0.973576] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
Apr 7 18:39:34 clayton kernel: [ 0.973698] cpuidle: using governor ladder
Apr 7 18:39:34 clayton kernel: [ 0.973759] cpuidle: using governor menu
Apr 7 18:39:34 clayton kernel: [ 0.973823] No iBFT detected.
Apr 7 18:39:34 clayton kernel: [ 0.974237] TCP cubic registered
Apr 7 18:39:34 clayton kernel: [ 0.974298] NET: Registered protocol family 17
Apr 7 18:39:34 clayton kernel: [ 0.974571] registered taskstats version 1
Apr 7 18:39:34 clayton kernel: [ 0.974838] rtc_cmos 00:07: setting system clock to 2009-04-07 22:34:19 UTC (1239143659)
Apr 7 18:39:34 clayton kernel: [ 0.974968] Freeing unused kernel memory: 536k freed
Apr 7 18:39:34 clayton kernel: [ 0.992549] input: AT Translated Set 2 keyboard as /class/input/input1
Apr 7 18:39:34 clayton kernel: [ 1.088428] ACPI: processor limited to max C-state 1
Apr 7 18:39:34 clayton kernel: [ 1.088634] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Apr 7 18:39:34 clayton kernel: [ 1.088934] processor ACPI_CPU:00: registered as cooling_device0
Apr 7 18:39:34 clayton kernel: [ 1.089000] ACPI: Processor [CPU0] (supports 8 throttling states)
Apr 7 18:39:34 clayton kernel: [ 1.089422] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Apr 7 18:39:34 clayton kernel: [ 1.089738] processor ACPI_CPU:01: registered as cooling_device1
Apr 7 18:39:34 clayton kernel: [ 1.089804] ACPI: Processor [CPU1] (supports 8 throttling states)
Apr 7 18:39:34 clayton kernel: [ 1.094499] ACPI Exception (thermal-0377): AE_OK, No or invalid critical threshold [20081204]
Apr 7 18:39:34 clayton kernel: [ 1.528582] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Apr 7 18:39:34 clayton kernel: [ 1.529110] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
Apr 7 18:39:34 clayton kernel: [ 1.529183] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
Apr 7 18:39:34 clayton kernel: [ 1.529287] ehci_hcd 0000:00:02.1: setting latency timer to 64
Apr 7 18:39:34 clayton kernel: [ 1.529290] ehci_hcd 0000:00:02.1: EHCI Host Controller
Apr 7 18:39:34 clayton kernel: [ 1.529452] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
Apr 7 18:39:34 clayton kernel: [ 1.529557] ehci_hcd 0000:00:02.1: debug port 1
Apr 7 18:39:34 clayton kernel: [ 1.529619] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
Apr 7 18:39:34 clayton kernel: [ 1.529639] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000
Apr 7 18:39:34 clayton kernel: [ 1.530292] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Apr 7 18:39:34 clayton kernel: [ 1.544049] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
Apr 7 18:39:34 clayton kernel: [ 1.544147] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Apr 7 18:39:34 clayton kernel: [ 1.544210] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 7 18:39:34 clayton kernel: [ 1.544284] usb usb1: Product: EHCI Host Controller
Apr 7 18:39:34 clayton kernel: [ 1.544344] usb usb1: Manufacturer: Linux 2.6.29.1-clayton-amd64 ehci_hcd
Apr 7 18:39:34 clayton kernel: [ 1.544407] usb usb1: SerialNumber: 0000:00:02.1
Apr 7 18:39:34 clayton kernel: [ 1.544556] usb usb1: configuration #1 chosen from 1 choice
Apr 7 18:39:34 clayton kernel: [ 1.544650] hub 1-0:1.0: USB hub found
Apr 7 18:39:34 clayton kernel: [ 1.544719] hub 1-0:1.0: 7 ports detected
Apr 7 18:39:34 clayton kernel: [ 1.545360] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
Apr 7 18:39:34 clayton kernel: [ 1.545433] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18
Apr 7 18:39:34 clayton kernel: [ 1.545538] ohci_hcd 0000:00:02.0: setting latency timer to 64
Apr 7 18:39:34 clayton kernel: [ 1.545541] ohci_hcd 0000:00:02.0: OHCI Host Controller
Apr 7 18:39:34 clayton kernel: [ 1.545664] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
Apr 7 18:39:34 clayton kernel: [ 1.545766] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000
Apr 7 18:39:34 clayton kernel: [ 1.576276] Uniform Multi-Platform E-IDE driver
Apr 7 18:39:34 clayton kernel: [ 1.606030] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Apr 7 18:39:34 clayton kernel: [ 1.606097] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 7 18:39:34 clayton kernel: [ 1.606171] usb usb2: Product: OHCI Host Controller
Apr 7 18:39:34 clayton kernel: [ 1.606232] usb usb2: Manufacturer: Linux 2.6.29.1-clayton-amd64 ohci_hcd
Apr 7 18:39:34 clayton kernel: [ 1.606295] usb usb2: SerialNumber: 0000:00:02.0
Apr 7 18:39:34 clayton kernel: [ 1.606438] usb usb2: configuration #1 chosen from 1 choice
Apr 7 18:39:34 clayton kernel: [ 1.606531] hub 2-0:1.0: USB hub found
Apr 7 18:39:34 clayton kernel: [ 1.606599] hub 2-0:1.0: 7 ports detected
Apr 7 18:39:34 clayton kernel: [ 1.606779] ohci1394 0000:02:05.0: enabling device (0100 -> 0102)
Apr 7 18:39:34 clayton kernel: [ 1.607244] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
Apr 7 18:39:34 clayton kernel: [ 1.607316] ohci1394 0000:02:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, low) -> IRQ 5
Apr 7 18:39:34 clayton kernel: [ 1.670066] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4]
Apr 7 18:39:34 clayton kernel: [ 1.683250] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22
Apr 7 18:39:34 clayton kernel: [ 1.683318] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z019] -> GSI 22 (level, low) -> IRQ 22
Apr 7 18:39:34 clayton kernel: [ 1.683422] ehci_hcd 0000:00:04.1: setting latency timer to 64
Apr 7 18:39:34 clayton kernel: [ 1.683425] ehci_hcd 0000:00:04.1: EHCI Host Controller
Apr 7 18:39:34 clayton kernel: [ 1.683600] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 3
Apr 7 18:39:34 clayton kernel: [ 1.683710] ehci_hcd 0000:00:04.1: debug port 1
Apr 7 18:39:34 clayton kernel: [ 1.683772] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
Apr 7 18:39:34 clayton kernel: [ 1.683781] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400
Apr 7 18:39:34 clayton kernel: [ 1.696037] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
Apr 7 18:39:34 clayton kernel: [ 1.696134] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
Apr 7 18:39:34 clayton kernel: [ 1.696198] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 7 18:39:34 clayton kernel: [ 1.696271] usb usb3: Product: EHCI Host Controller
Apr 7 18:39:34 clayton kernel: [ 1.696332] usb usb3: Manufacturer: Linux 2.6.29.1-clayton-amd64 ehci_hcd
Apr 7 18:39:34 clayton kernel: [ 1.696397] usb usb3: SerialNumber: 0000:00:04.1
Apr 7 18:39:34 clayton kernel: [ 1.696543] usb usb3: configuration #1 chosen from 1 choice
Apr 7 18:39:34 clayton kernel: [ 1.696636] hub 3-0:1.0: USB hub found
Apr 7 18:39:34 clayton kernel: [ 1.696703] hub 3-0:1.0: 2 ports detected
Apr 7 18:39:34 clayton kernel: [ 1.698240] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18
Apr 7 18:39:34 clayton kernel: [ 1.698308] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z018] -> GSI 18 (level, low) -> IRQ 18
Apr 7 18:39:34 clayton kernel: [ 1.698421] ohci_hcd 0000:00:04.0: setting latency timer to 64
Apr 7 18:39:34 clayton kernel: [ 1.698424] ohci_hcd 0000:00:04.0: OHCI Host Controller
Apr 7 18:39:34 clayton kernel: [ 1.698573] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
Apr 7 18:39:34 clayton kernel: [ 1.698664] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000
Apr 7 18:39:34 clayton kernel: [ 1.758980] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Apr 7 18:39:34 clayton kernel: [ 1.759047] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 7 18:39:34 clayton kernel: [ 1.759121] usb usb4: Product: OHCI Host Controller
Apr 7 18:39:34 clayton kernel: [ 1.759182] usb usb4: Manufacturer: Linux 2.6.29.1-clayton-amd64 ohci_hcd
Apr 7 18:39:34 clayton kernel: [ 1.759244] usb usb4: SerialNumber: 0000:00:04.0
Apr 7 18:39:34 clayton kernel: [ 1.759396] usb usb4: configuration #1 chosen from 1 choice
Apr 7 18:39:34 clayton kernel: [ 1.759491] hub 4-0:1.0: USB hub found
Apr 7 18:39:34 clayton kernel: [ 1.759560] hub 4-0:1.0: 2 ports detected
Apr 7 18:39:34 clayton kernel: [ 1.760773] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62.
Apr 7 18:39:34 clayton kernel: [ 1.761284] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
Apr 7 18:39:34 clayton kernel: [ 1.761357] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
Apr 7 18:39:34 clayton kernel: [ 1.761435] forcedeth 0000:00:0a.0: setting latency timer to 64

Frozen here. While frozen, the next line is eventually emitted:

Apr 7 18:39:34 clayton kernel: [ 172.893053] Clocksource tsc unstable (delta = 4398045745927 ns)

Pressed and released power button here, and booting resumes:

Apr 7 18:39:34 clayton kernel: [ 237.833401] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:86:ea:33
Apr 7 18:39:34 clayton kernel: [ 237.833480] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3
Apr 7 18:39:34 clayton kernel: [ 237.837294] amd74xx 0000:00:06.0: UDMA133 controller
Apr 7 18:39:34 clayton kernel: [ 237.837360] amd74xx 0000:00:06.0: IDE controller (0x10de:0x0560 rev 0xa1)
Apr 7 18:39:34 clayton kernel: [ 237.837439] amd74xx 0000:00:06.0: IDE port disabled
Apr 7 18:39:34 clayton kernel: [ 237.837512] amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround.
Apr 7 18:39:34 clayton kernel: [ 237.837588] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
Apr 7 18:39:34 clayton kernel: [ 237.837654] ide0: BM-DMA at 0x30c0-0x30c7
Apr 7 18:39:34 clayton kernel: [ 237.837718] Probing IDE interface ide0...
Apr 7 18:39:34 clayton kernel: [ 237.851463] SCSI subsystem initialized
Apr 7 18:39:34 clayton kernel: [ 237.872494] libata version 3.00 loaded.
Apr 7 18:39:34 clayton kernel: [ 237.892039] usb 3-2: new high speed USB device using ehci_hcd and address 2
Apr 7 18:39:34 clayton kernel: [ 238.030843] usb 3-2: New USB device found, idVendor=064e, idProduct=a110
Apr 7 18:39:34 clayton kernel: [ 238.030920] usb 3-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
Apr 7 18:39:34 clayton kernel: [ 238.030985] usb 3-2: Product: HP Webcam
Apr 7 18:39:34 clayton kernel: [ 238.031044] usb 3-2: Manufacturer: SuYin
Apr 7 18:39:34 clayton kernel: [ 238.031103] usb 3-2: SerialNumber: CN0314-MI01-VH-R03.01.01
Apr 7 18:39:34 clayton kernel: [ 238.031264] usb 3-2: configuration #1 chosen from 1 choice
Apr 7 18:39:34 clayton kernel: [ 238.037422] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b000fd80b01]
Apr 7 18:39:34 clayton kernel: [ 238.573092] hda: HL-DT-ST DVDRAM GSA-T20N, ATAPI CD/DVD-ROM drive
Apr 7 18:39:34 clayton kernel: [ 238.908169] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Apr 7 18:39:34 clayton kernel: [ 238.908949] hda: MWDMA2 mode selected
Apr 7 18:39:34 clayton kernel: [ 238.909392] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr 7 18:39:34 clayton kernel: [ 238.917597] ahci 0000:00:09.0: version 3.0
Apr 7 18:39:34 clayton kernel: [ 238.917999] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
Apr 7 18:39:34 clayton kernel: [ 238.918073] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
Apr 7 18:39:34 clayton kernel: [ 238.918204] ahci 0000:00:09.0: irq 26 for MSI/MSI-X
Apr 7 18:39:34 clayton kernel: [ 238.918283] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
Apr 7 18:39:34 clayton kernel: [ 238.918359] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part
Apr 7 18:39:34 clayton kernel: [ 238.918423] ahci 0000:00:09.0: setting latency timer to 64
Apr 7 18:39:34 clayton kernel: [ 238.927455] scsi0 : ahci
Apr 7 18:39:34 clayton kernel: [ 238.929058] scsi1 : ahci
Apr 7 18:39:34 clayton kernel: [ 238.930927] scsi2 : ahci
Apr 7 18:39:34 clayton kernel: [ 238.934122] ide-cd driver 5.00
Apr 7 18:39:34 clayton kernel: [ 238.934419] scsi3 : ahci
Apr 7 18:39:34 clayton kernel: [ 238.934633] ata1: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484100 irq 26
Apr 7 18:39:34 clayton kernel: [ 238.934707] ata2: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 26
Apr 7 18:39:34 clayton kernel: [ 238.934781] ata3: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 26
Apr 7 18:39:34 clayton kernel: [ 238.934855] ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 26
Apr 7 18:39:34 clayton kernel: [ 238.935701] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
Apr 7 18:39:34 clayton kernel: [ 238.936045] Uniform CD-ROM driver Revision: 3.20
Apr 7 18:39:34 clayton kernel: [ 239.416127] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 7 18:39:34 clayton kernel: [ 239.416931] ata1.00: ATA-8: ST9200827AS, 3.BHA, max UDMA/100
Apr 7 18:39:34 clayton kernel: [ 239.416999] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
Apr 7 18:39:34 clayton kernel: [ 239.417530] ata1.00: configured for UDMA/100
Apr 7 18:39:34 clayton kernel: [ 239.417698] scsi 0:0:0:0: Direct-Access ATA ST9200827AS 3.BH PQ: 0 ANSI: 5
Apr 7 18:39:34 clayton kernel: [ 239.433525] Driver 'sd' needs updating - please use bus_type methods
Apr 7 18:39:34 clayton kernel: [ 239.434925] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
Apr 7 18:39:34 clayton kernel: [ 239.435016] sd 0:0:0:0: [sda] Write Protect is off
Apr 7 18:39:34 clayton kernel: [ 239.435080] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 7 18:39:34 clayton kernel: [ 239.435410] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 7 18:39:34 clayton kernel: [ 239.435562] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
Apr 7 18:39:34 clayton kernel: [ 239.435647] sd 0:0:0:0: [sda] Write Protect is off
Apr 7 18:39:34 clayton kernel: [ 239.435708] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 7 18:39:34 clayton kernel: [ 239.435730] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 7 18:39:34 clayton kernel: [ 239.435808] sda: sda1 sda2 sda3
Apr 7 18:39:34 clayton kernel: [ 239.599114] sd 0:0:0:0: [sda] Attached SCSI disk
Apr 7 18:39:34 clayton kernel: [ 239.737120] ata2: SATA link down (SStatus 0 SControl 300)
Apr 7 18:39:34 clayton kernel: [ 239.823781] PM: Starting manual resume from disk
Apr 7 18:39:34 clayton kernel: [ 239.917201] kjournald starting. Commit interval 5 seconds
Apr 7 18:39:34 clayton kernel: [ 239.917276] EXT3-fs: mounted filesystem with ordered data mode.
Apr 7 18:39:34 clayton kernel: [ 240.056239] ata3: SATA link down (SStatus 0 SControl 300)
Apr 7 18:39:34 clayton kernel: [ 240.377121] ata4: SATA link down (SStatus 0 SControl 300)
Apr 7 18:39:34 clayton kernel: [ 241.524691] udevd version 125 started
Apr 7 18:39:34 clayton kernel: [ 242.671551] input: Power Button (FF) as /class/input/input2
Apr 7 18:39:34 clayton kernel: [ 242.697093] ACPI: Power Button (FF) [PWRF]
Apr 7 18:39:34 clayton kernel: [ 242.697243] input: Sleep Button (CM) as /class/input/input3
Apr 7 18:39:34 clayton kernel: [ 242.729079] ACPI: Sleep Button (CM) [SLPB]
Apr 7 18:39:34 clayton kernel: [ 242.729231] input: Lid Switch as /class/input/input4
Apr 7 18:39:34 clayton kernel: [ 242.749237] ACPI: Lid Switch [LID]
Apr 7 18:39:34 clayton kernel: [ 242.752102] ACPI: AC Adapter [ACAD] (off-line)
Apr 7 18:39:34 clayton kernel: [ 242.752265] input: Power Button (CM) as /class/input/input5
Apr 7 18:39:34 clayton kernel: [ 242.785081] ACPI: Power Button (CM) [PWRB]
Apr 7 18:39:34 clayton kernel: [ 243.083635] ACPI: Battery Slot [BAT0] (battery present)
Apr 7 18:39:34 clayton kernel: [ 243.083813] ACPI: WMI: Mapper loaded
Apr 7 18:39:34 clayton kernel: [ 243.356275] acpi device:25: registered as cooling_device2
Apr 7 18:39:34 clayton kernel: [ 243.356573] input: Video Bus as /class/input/input6
Apr 7 18:39:34 clayton kernel: [ 243.385073] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
Apr 7 18:39:34 clayton kernel: [ 243.513149] Linux video capture interface: v2.00
Apr 7 18:39:34 clayton kernel: [ 243.537626] input: PC Speaker as /class/input/input7
Apr 7 18:39:34 clayton kernel: [ 243.560918] uvcvideo: Found UVC 1.00 device HP Webcam (064e:a110)
Apr 7 18:39:34 clayton kernel: [ 243.561936] input: HP Webcam as /class/input/input8
Apr 7 18:39:34 clayton kernel: [ 243.601132] usbcore: registered new interface driver uvcvideo
Apr 7 18:39:34 clayton kernel: [ 243.601198] USB Video Class driver (v0.1.0)
Apr 7 18:39:34 clayton kernel: [ 243.645000] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
Apr 7 18:39:34 clayton kernel: [ 244.127345] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
Apr 7 18:39:34 clayton kernel: [ 244.127422] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
Apr 7 18:39:34 clayton kernel: [ 244.127603] HDA Intel 0000:00:07.0: setting latency timer to 64
Apr 7 18:39:34 clayton kernel: [ 244.656750] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000
Apr 7 18:39:34 clayton kernel: [ 244.733009] input: SynPS/2 Synaptics TouchPad as /class/input/input9

Frozen here. While holding CTRL, the rest of the boot happens:

Apr 7 18:39:34 clayton kernel: [ 305.239452] input: HDA NVidia Mic as /class/input/input10
Apr 7 18:39:34 clayton kernel: [ 305.364372] input: HDA NVidia Mic as /class/input/input11
Apr 7 18:39:34 clayton kernel: [ 305.489385] input: HDA NVidia Headphone as /class/input/input12
Apr 7 18:39:34 clayton kernel: [ 307.904267] Adding 1927792k swap on /dev/sda3. Priority:-1 extents:1 across:1927792k
Apr 7 18:39:34 clayton kernel: [ 307.951308] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Apr 7 18:39:34 clayton kernel: [ 307.951559] EXT3 FS on sda2, internal journal
Apr 7 18:39:34 clayton kernel: [ 309.018953] loop: module loaded
Apr 7 18:39:34 clayton kernel: [ 309.292518] fuse init (API version 7.11)
Apr 7 18:39:34 clayton kernel: [ 311.571468] Bridge firewalling registered
Apr 7 18:39:34 clayton kernel: [ 315.866910] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00)
Apr 7 18:39:34 clayton kernel: [ 315.866977] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x12
Apr 7 18:39:34 clayton kernel: [ 315.866981] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13
Apr 7 18:39:34 clayton kernel: [ 315.866984] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14
Apr 7 18:39:34 clayton kernel: [ 315.866986] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
Apr 7 18:39:36 clayton kernel: [ 317.784775] NET: Registered protocol family 10
Apr 7 18:39:36 clayton kernel: [ 317.785476] lo: Disabled Privacy Extensions
Apr 7 18:39:46 clayton kernel: [ 328.135079] br0: no IPv6 routers present
Apr 7 18:39:49 clayton kernel: [ 331.727873] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
Apr 7 18:39:53 clayton kernel: [ 334.950815] Bluetooth: Core ver 2.14
Apr 7 18:39:53 clayton kernel: [ 334.951050] NET: Registered protocol family 31
Apr 7 18:39:53 clayton kernel: [ 334.951118] Bluetooth: HCI device and connection manager initialized
Apr 7 18:39:53 clayton kernel: [ 334.951192] Bluetooth: HCI socket layer initialized
Apr 7 18:39:53 clayton kernel: [ 335.018263] Bluetooth: L2CAP ver 2.11
Apr 7 18:39:53 clayton kernel: [ 335.018339] Bluetooth: L2CAP socket layer initialized
Apr 7 18:39:53 clayton kernel: [ 335.090718] Bluetooth: RFCOMM socket layer initialized
Apr 7 18:39:53 clayton kernel: [ 335.090821] Bluetooth: RFCOMM TTY layer initialized
Apr 7 18:39:53 clayton kernel: [ 335.090889] Bluetooth: RFCOMM ver 1.10
Apr 7 18:39:53 clayton kernel: [ 335.302142] forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X
Apr 7 18:39:53 clayton kernel: [ 335.302400] eth0: no link during initialization.
Apr 7 18:39:53 clayton kernel: [ 335.304649] ADDRCONF(NETDEV_UP): eth0: link is not ready
Apr 7 18:39:58 clayton kernel: [ 340.377782] ip_tables: (C) 2000-2006 Netfilter Core Team
Apr 7 18:39:58 clayton kernel: [ 340.430257] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Apr 7 18:39:58 clayton kernel: [ 340.430719] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Apr 7 18:39:58 clayton kernel: [ 340.430726] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
Apr 7 18:39:58 clayton kernel: [ 340.430732] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.

And here we are dumped to the console. (Not X since I am booting without the binary nvidia GPU drivers to ensure they are not the problem, and to capture an untainted log.)

Next message: Jeff Garzik: "[PATCH v2] osdblk: a Linux block device for OSD objects"
Previous message: David Brownell: "Re: [PATCH] MTD-NAND: Changes to read_page APIs to support NAND_ECC_HW_SYNDROME mode on TI DaVinci DM355"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]