Re: 2.6.29 regression: ATA bus errors on resume
From: Niel Lambrechts
Date: Thu Apr 02 2009 - 07:04:27 EST
On 04/02/2009 08:52 AM, Tejun Heo wrote:
> Niel Lambrechts wrote:
>
>>> Attached is the debug patch. Please reproduce the problem with the
>>> patch applied and post full kernel log.
>>>
>>>
>> Hi there,
>>
>> Here is the output, it took 2 attempts to reproduce the EXT4 corruption
>> (clean with errors).
>>
>
> Strange. Maybe IO commands are getting through while the sdev is
> still in quiesce state? Can you please repeat the test with the
> attached patch?
>
Hi Tejun,
Thanks for your help, I've done at least 5 hibernate cycles without the
problem recurring, I'll keep at it for a while... :)
For the sake of being thorough, I'd like to mention some of the
remaining issues/messages, but to be honest some of them were there
before and may not be relevant to your efforts:
1) Can you perhaps confirm if the remaining ATA messages are harmless
enough to ignore?
dmesg:
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0x1e frozen
ata2: irq_stat 0x00400040, connection status changed
ata2: SError: { PHYRdyChg CommWake DevExch }
Clocksource tsc unstable (delta = -412838835 ns)
and in messages:
Apr 2 12:31:44 linux-7vph kernel: ata1: exception Emask 0x10 SAct 0x0
SErr 0x0 action 0x9 t4
2) The screen remains blank on resume, right until I both press a key
_and_ touch the touchpad. Weird, but this happens in 2.6.28.9 as well,
perhaps this is i915 related.
Thanks very much for sorting the more serious issue so quickly!
Regards,
Niel
Linux version 2.6.29-pae (root@linux-7vph) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #2 SMP Thu Apr 2 07:43:01 SAST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007c6a1000 (usable)
BIOS-e820: 000000007c6a1000 - 000000007c6a7000 (reserved)
BIOS-e820: 000000007c6a7000 - 000000007c7b7000 (usable)
BIOS-e820: 000000007c7b7000 - 000000007c80f000 (reserved)
BIOS-e820: 000000007c80f000 - 000000007c8c7000 (usable)
BIOS-e820: 000000007c8c7000 - 000000007c8d2000 (ACPI NVS)
BIOS-e820: 000000007c8d2000 - 000000007c8d5000 (ACPI data)
BIOS-e820: 000000007c8d5000 - 000000007c8d9000 (reserved)
BIOS-e820: 000000007c8d9000 - 000000007c8dd000 (ACPI NVS)
BIOS-e820: 000000007c8dd000 - 000000007c8e0000 (reserved)
BIOS-e820: 000000007c8e0000 - 000000007c907000 (ACPI NVS)
BIOS-e820: 000000007c907000 - 000000007c908000 (ACPI data)
BIOS-e820: 000000007c908000 - 000000007cb0f000 (reserved)
BIOS-e820: 000000007cb0f000 - 000000007cb9f000 (ACPI NVS)
BIOS-e820: 000000007cb9f000 - 000000007cbff000 (ACPI data)
BIOS-e820: 000000007cbff000 - 000000007cc00000 (usable)
BIOS-e820: 000000007cc00000 - 000000007f000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x7cc00 max_arch_pfn = 0x1000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 373fe000 @ 7000-10000
NX (Execute Disable) protection: active
RAMDISK: 37a2d000 - 37fef112
Allocated new RAMDISK: 005a2000 - 00b64112
Move RAMDISK from 0000000037a2d000 - 0000000037fef111 to 005a2000 - 00b64111
ACPI: RSDP 000F6530, 0024 (r2 LENOVO)
ACPI: XSDT 7CB6A5B6, 0094 (r1 LENOVO TP-6F 1200 LTP 0)
ACPI: FACP 7CB6A700, 00F4 (r3 LENOVO TP-6F 1200 LNVO 1)
ACPI Warning (tbfadt-0568): 32/64X length mismatch in Pm1aControlBlock: 16/32 [20081204]
ACPI Warning (tbfadt-0412): Invalid length for Pm1aControlBlock: 32, using default 16 [20081204]
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 7CB6AADB, F0B8 (r1 LENOVO TP-6F 1200 MSFT 3000000)
ACPI: FACS 7CB8E000, 0040
ACPI: SSDT 7CB6A8B4, 0227 (r1 LENOVO TP-6F 1200 MSFT 3000000)
ACPI: ECDT 7CB79B93, 0052 (r1 LENOVO TP-6F 1200 LNVO 1)
ACPI: APIC 7CB79BE5, 0078 (r1 LENOVO TP-6F 1200 LNVO 1)
ACPI: MCFG 7CB79C5D, 003C (r1 LENOVO TP-6F 1200 LNVO 1)
ACPI: HPET 7CB79C99, 0038 (r1 LENOVO TP-6F 1200 LNVO 1)
ACPI: SLIC 7CB79DC2, 0176 (r1 LENOVO TP-6F 1200 LTP 0)
ACPI: BOOT 7CB79F38, 0028 (r1 LENOVO TP-6F 1200 LTP 1)
ACPI: ASF! 7CB79F60, 00A0 (r16 LENOVO TP-6F 1200 PTL 1)
ACPI: SSDT 7CB8D213, 054F (r1 LENOVO TP-6F 1200 INTL 20050513)
ACPI: TCPA 7C907000, 0032 (r0 0 0)
ACPI: SSDT 7C8D4000, 0655 (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: SSDT 7C8D3000, 0274 (r1 PmRef Cpu0Tst 3000 INTL 20050624)
ACPI: SSDT 7C8D2000, 0242 (r1 PmRef ApTst 3000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
1112MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 00000000 - 373fe000
bootmap 0000d000 - 00013e80
(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000059a904] TEXT DATA BSS ==> [0000100000 - 000059a904]
#4 [000059b000 - 00005a2000] INIT_PG_TABLE ==> [000059b000 - 00005a2000]
#5 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
#6 [0000007000 - 000000d000] PGTABLE ==> [0000007000 - 000000d000]
#7 [00005a2000 - 0000b64112] NEW RAMDISK ==> [00005a2000 - 0000b64112]
#8 [000000d000 - 0000014000] BOOTMAP ==> [000000d000 - 0000014000]
found SMP MP-table at [c00f6570] 000f6570
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x0007cc00
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000000 -> 0x0000009e
0: 0x00000100 -> 0x0007c6a1
0: 0x0007c6a7 -> 0x0007c7b7
0: 0x0007c80f -> 0x0007c8c7
0: 0x0007cbff -> 0x0007cc00
On node 0 totalpages: 509960
free_area_init_node: node 0, pgdat c0446a80, node_mem_map c1000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3966 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 2225 pages used for memmap
HighMem zone: 281531 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7f000000:61000000)
NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Allocating 40960 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 505967
Kernel command line: root=/dev/disk/by-id/ata-HITACHI_HTS722020K9SA00_FDE_080726DP0470DTGMUNPC-part6 resume=/dev/disk/by-id/ata-HITACHI_HTS722020K9SA00_FDE_080726DP0470DTGMUNPC-part5 splash=silent showopts modeset=0 i915.modeset=0 vga=791
Unknown boot option `i915.modeset=0': ignoring
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2526.931 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2011324k/2043904k available (2060k kernel code, 27660k reserved, 1699k data, 324k init, 1135024k highmem)
virtual kernel memory layout:
fixmap : 0xff937000 - 0xfffff000 (6944 kB)
pkmap : 0xff400000 - 0xff600000 (2048 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc04b4000 - 0xc0505000 ( 324 kB)
.data : 0xc03033b5 - 0xc04ac080 (1699 kB)
.text : 0xc0100000 - 0xc03033b5 (2060 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.86 BogoMIPS (lpj=10107724)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
[ds] using Core 2/Atom configuration
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20081204
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5053.96 BogoMIPS (lpj=10107935)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
[ds] using Core 2/Atom configuration
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (10107.82 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
net_namespace: 1024 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xf4400000-0xf47fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
pci 0000:00:02.1: reg 10 64bit mmio: [0xf4200000-0xf42fffff]
pci 0000:00:03.0: reg 10 64bit mmio: [0xfc226800-0xfc22680f]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:19.0: reg 10 32bit mmio: [0xfc000000-0xfc01ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xfc025000-0xfc025fff]
pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc226c00-0xfc226fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc020000-0xfc023fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc227000-0xfc2273ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x1c48-0x1c4f]
pci 0000:00:1f.2: reg 14 io port: [0x183c-0x183f]
pci 0000:00:1f.2: reg 18 io port: [0x1c40-0x1c47]
pci 0000:00:1f.2: reg 1c io port: [0x1838-0x183b]
pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc226000-0xfc2267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfc227400-0xfc2274ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
pci 0000:03:00.0: reg 10 64bit mmio: [0xf4300000-0xf4301fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xf4300000-0xf43fffff]
pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf40fffff]
pci 0000:00:1c.4: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf4100000-0xf41fffff]
pci 0000:15:00.0: reg 10 32bit mmio: [0xf4800000-0xf4800fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.0: PME# disabled
pci 0000:15:00.1: reg 10 32bit mmio: [0xf4801000-0xf48017ff]
pci 0000:15:00.1: supports D1 D2
pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.1: PME# disabled
pci 0000:15:00.2: reg 10 32bit mmio: [0xf4801800-0xf48018ff]
pci 0000:15:00.2: supports D1 D2
pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.2: PME# disabled
pci 0000:15:00.3: reg 10 32bit mmio: [0xf4801c00-0xf4801cff]
pci 0000:15:00.3: supports D1 D2
pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.3: PME# disabled
pci 0000:15:00.4: reg 10 32bit mmio: [0xf4802000-0xf48020ff]
pci 0000:15:00.4: supports D1 D2
pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.4: PME# disabled
pci 0000:15:00.5: reg 10 32bit mmio: [0xf4802400-0xf48024ff]
pci 0000:15:00.5: supports D1 D2
pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.5: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x4000-0x7fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf4800000-0xf7ffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf0000000-0xf3ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: Power Resource [PUBS] (on)
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xcc000-0xcffff has been reserved
system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x7effffff could not be reserved
system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
system 00:02: ioport range 0x164e-0x164f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11ff has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x1641 has been reserved
system 00:02: ioport range 0x1600-0x161b has been reserved
system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
system 00:02: iomem range 0xfed40000-0xfed44fff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0xf4300000-0xf43fffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.3: IO window: 0x2000-0x2fff
pci 0000:00:1c.3: MEM window: 0xf8000000-0xf9ffffff
pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f40fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
pci 0000:00:1c.4: IO window: 0x3000-0x3fff
pci 0000:00:1c.4: MEM window: 0xfa000000-0xfbffffff
pci 0000:00:1c.4: PREFETCH window: 0x000000f4100000-0x000000f41fffff
pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
pci 0000:15:00.0: IO window: 0x004000-0x0040ff
pci 0000:15:00.0: IO window: 0x004400-0x0044ff
pci 0000:15:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
pci 0000:15:00.0: MEM window: 0x80000000-0x83ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
pci 0000:00:1e.0: IO window: 0x4000-0x7fff
pci 0000:00:1e.0: MEM window: 0xf4800000-0xf7ffffff
pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f3ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 mem: [0x0-0x0]
pci_bus 0000:02: resource 1 mem: [0x0-0x0]
pci_bus 0000:02: resource 2 mem: [0x0-0x0]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 mem: [0x0-0x0]
pci_bus 0000:03: resource 1 mem: [0xf4300000-0xf43fffff]
pci_bus 0000:03: resource 2 mem: [0x0-0x0]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:05: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:05: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:05: resource 2 mem: [0xf4000000-0xf40fffff]
pci_bus 0000:05: resource 3 mem: [0x0-0x0]
pci_bus 0000:0d: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:0d: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:0d: resource 2 mem: [0xf4100000-0xf41fffff]
pci_bus 0000:0d: resource 3 mem: [0x0-0x0]
pci_bus 0000:15: resource 0 io: [0x4000-0x7fff]
pci_bus 0000:15: resource 1 mem: [0xf4800000-0xf7ffffff]
pci_bus 0000:15: resource 2 mem: [0xf0000000-0xf3ffffff]
pci_bus 0000:15: resource 3 io: [0x00-0xffff]
pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:16: resource 0 io: [0x4000-0x40ff]
pci_bus 0000:16: resource 1 io: [0x4400-0x44ff]
pci_bus 0000:16: resource 2 mem: [0xf0000000-0xf3ffffff]
pci_bus 0000:16: resource 3 mem: [0x80000000-0x83ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...<7>Switched to high resolution mode on CPU 1
done
Switched to high resolution mode on CPU 0
Freeing initrd memory: 5896k freed
Simple Boot Flag at 0x35 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
type=2000 audit(1238674046.552:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1724
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X
vesafb: framebuffer at 0xd0000000, mapped to 0xf7c80000, using 3072k, total 32704k
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
Using IPI No-Shortcut mode
Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
registered taskstats version 1
Freeing unused kernel memory: 324k freed
Write protecting the kernel text: 2064k
Write protecting the kernel read-only data: 1068k
ACPI: SSDT 7C8D7C20, 02C8 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT 7C8D5020, 087A (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7C8D6CA0, 01CF (r1 PmRef ApIst 3000 INTL 20050624)
ACPI: SSDT 7C8D6F20, 008D (r1 PmRef ApCst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Marking TSC unstable due to TSC halts in idle
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (46 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (41 C)
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 28
ata3: DUMMY
ata4: DUMMY
ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x16 frozen
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ATA-8: HITACHI HTS722020K9SA00 FDE, DC4LC75A, max UDMA/133
ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/133
ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 t4
ata1.00: configured for UDMA/133
ata1: EH complete
scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72202 DC4L PQ: 0 ANSI: 5
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0x1e frozen
ata2: irq_stat 0x00400040, connection status changed
ata2: SError: { PHYRdyChg CommWake DevExch }
Clocksource tsc unstable (delta = -412838835 ns)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX10, max UDMA/133
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
ata2.00: configured for UDMA/133
ata2: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 t4
ata2: irq_stat 0x40000001
ata2: EH complete
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX10 PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
udevd version 128 started
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
uhci_hcd: USB Universal Host Controller Interface driver
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29-pae ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29-pae uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
Monitor-Mwait will be used to enter C-3 state
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.29-pae ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.7
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.29-pae uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.29-pae uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
sda1<6>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.29-pae uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.29-pae uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.29-pae uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: New USB device found, idVendor=08ff, idProduct=2810
usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-1: Product: Fingerprint Sensor
usb 4-1: configuration #1 chosen from 1 choice
PM: Starting manual resume from disk
usb 6-2: new low speed USB device using uhci_hcd and address 2
usb 6-2: New USB device found, idVendor=1241, idProduct=1166
usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 6-2: configuration #1 chosen from 1 choice
EXT4-fs: barriers enabled
kjournald2 starting: pid 684, dev sda6:8, commit interval 5 seconds
EXT4 FS on sda6, internal journal on sda6:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda6 with ordered data mode
usbcore: registered new interface driver hiddev
input: HID 1241:1166 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input4
generic-usb 0003:1241:1166.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:1d.0-2/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
EXT4 (no)acl options not supported
udevd version 128 started
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
Driver 'sr' needs updating - please use bus_type methods
cfg80211: Calling CRDA for country: US
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ACPI: Battery Slot [BAT0] (battery present)
iTCO_vendor_support: vendor-support=0
Linux agpgart interface v0.103
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: WMI: Mapper loaded
ACPI: AC Adapter [AC] (on-line)
Non-volatile memory driver v1.3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
ACPI: Sleep Button (CM) [SLPB]
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
ata2.00: XXX setting retry on qc0
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000001
ata2.00: XXX terminating qc0 (SENSE), retries=0
XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=0 allowed=0
scsi_eh_1: flush finish cmd: f58fe500
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:25:95:93:ec
cfg80211: Regulatory domain changed to country: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
ata2.00: XXX setting retry on qc0
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000001
ata2.00: XXX terminating qc0 (SENSE), retries=0
XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=3 allowed=3
scsi_eh_1: flush finish cmd: f58fec80
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
ILI
sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
Buffer I/O error on device sr0, logical block 2
Buffer I/O error on device sr0, logical block 3
ata2.00: XXX setting retry on qc0
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000001
ata2.00: XXX terminating qc0 (SENSE), retries=0
XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=3 allowed=3
scsi_eh_1: flush finish cmd: f58fec80
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
ILI
sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 6, PHY: 8, PBA No: 1008ff-0ff
ata2.00: XXX setting retry on qc0
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000001
ata2.00: XXX terminating qc0 (SENSE), retries=0
XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=0 allowed=0
scsi_eh_1: flush finish cmd: f58fed40
ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT contexts=[4/4]
ata2.00: XXX setting retry on qc0
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000001
ata2.00: XXX terminating qc0 (SENSE), retries=0
XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=3 allowed=3
scsi_eh_1: flush finish cmd: f58fec80
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
ILI
sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
Buffer I/O error on device sr0, logical block 2
Buffer I/O error on device sr0, logical block 3
agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
ata2.00: XXX setting retry on qc0
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2.00: irq_stat 0x40000001
ata2.00: XXX terminating qc0 (SENSE), retries=0
XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=3 allowed=3
scsi_eh_1: flush finish cmd: f58fe500
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
ILI
sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
acpi device:03: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input8
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
thinkpad_acpi: ThinkPad ACPI Extras v0.22
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 6FET50WW (1.20 ), EC 7VHT12WW-1.01
thinkpad_acpi: Lenovo ThinkPad W500, model 40622XG
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it
thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi:orange:batt
Registered led device: tpacpi:green:batt
Registered led device: tpacpi::dock_active
Registered led device: tpacpi::bay_active
Registered led device: tpacpi::dock_batt
Registered led device: tpacpi::unknown_led
Registered led device: tpacpi::standby
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
input: ThinkPad Extra Buttons as /devices/virtual/input/input9
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: setting latency timer to 64
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
iwlagn: Copyright(c) 2003-2008 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:03:00.0: PCI INT A disabled
wmaster0 (iwlagn): not using net_device_ops yet
phy0: Selected rate control algorithm 'iwl-agn-rs'
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input10
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input11
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input12
wlan0 (iwlagn): not using net_device_ops yet
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00016c00006a3b88]
usbcore: registered new interface driver snd-usb-audio
Adding 2099328k swap on /dev/sda5. Priority:-1 extents:1 across:2099328k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.11)
platform microcode: firmware: requesting intel-ucode/06-17-06
platform microcode: firmware: requesting intel-ucode/06-17-06
Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
powernow: This module only works with AMD K7 CPUs
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X
iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
iwlagn loaded firmware version 5.4.1.16
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: power state changed by ACPI to D0
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.0: irq 31 for MSI/MSI-X
[drm] Initialized i915 1.6.0 20080730 on minor 0
set status page addr 0x071ab000
Xorg:3807 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
Xorg:3807 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
Xorg:3807 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
Xorg:3848 freeing invalid memtype d0000000-e0000000
Xorg:3807 conflicting memory types d0000000-e0000000 write-combining<->uncached-minus
reserve_memtype failed 0xd0000000-0xe0000000, track write-combining, req write-combining
Xorg:3849 freeing invalid memtype d0000000-e0000000
ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x10
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Shrinking memory... -\|/-\|/-done (105462 pages freed)
PM: Freed 421848 kbytes in 4.28 seconds (98.56 MB/s)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI handle has no context!
iwlagn 0000:03:00.0: PCI INT A disabled
ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ehci_hcd 0000:00:1d.7: PCI INT D disabled
ehci_hcd 0000:00:1d.7: PME# disabled
uhci_hcd 0000:00:1d.2: PCI INT C disabled
uhci_hcd 0000:00:1d.1: PCI INT B disabled
uhci_hcd 0000:00:1d.0: PCI INT A disabled
HDA Intel 0000:00:1b.0: PCI INT B disabled
ehci_hcd 0000:00:1a.7: PCI INT D disabled
ehci_hcd 0000:00:1a.7: PME# disabled
uhci_hcd 0000:00:1a.2: PCI INT C disabled
uhci_hcd 0000:00:1a.1: PCI INT B disabled
uhci_hcd 0000:00:1a.0: PCI INT A disabled
e1000e 0000:00:19.0: PME# enabled
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
e1000e 0000:00:19.0: PME# enabled
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
e1000e 0000:00:19.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching NULL sched-domain.
CPU1 is down
Extended CMOS year: 2000
PM: Creating hibernation image:
PM: Need to copy 120734 pages
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
PM: Restoring platform NVS memory
Extended CMOS year: 2000
pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5054.02 BogoMIPS (lpj=10108052)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
[ds] using Core 2/Atom configuration
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
CPU0 attaching NULL sched-domain.
Switched to high resolution mode on CPU 1
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
CPU1 is up
ACPI: Waking up from system sleep state S4
ACPI: EC: non-query interrupt received, switching to interrupt mode
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.0: power state changed by ACPI to D0
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.1: PME# disabled
pci 0000:00:03.0: PME# disabled
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
e1000e 0000:00:19.0: PME# disabled
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
e1000e 0000:00:19.0: PME# disabled
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
ehci_hcd 0000:00:1a.7: PME# disabled
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: PME# disabled
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.4: setting latency timer to 64
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
ehci_hcd 0000:00:1d.7: PME# disabled
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x16 frozen
ata2: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x16 frozen
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT contexts=[4/4]
pci 0000:15:00.2: PME# disabled
pci 0000:15:00.3: PME# disabled
pci 0000:15:00.4: PME# disabled
pci 0000:15:00.5: PME# disabled
sd 0:0:0:0: [sda] Starting disk
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/133
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
ata1: irq_stat 0x00400040, connection status changed
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/133
ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
ata2: irq_stat 0x40000001
ata2.00: configured for UDMA/133
ata2: EH complete
pci 0000:00:02.0: power state changed by ACPI to D0
pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900407, writing 0x900403)
pci 0000:00:02.0: setting latency timer to 64
Restarting tasks ... done.
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
0000:00:19.0: eth0: 10/100 speed: disabling TSO
uhci_hcd 0000:00:1d.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Shrinking memory... -\|/-\done (50005 pages freed)
PM: Freed 200020 kbytes in 2.93 seconds (68.26 MB/s)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI handle has no context!
iwlagn 0000:03:00.0: PCI INT A disabled
ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata2: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ehci_hcd 0000:00:1d.7: PCI INT D disabled
ehci_hcd 0000:00:1d.7: PME# disabled
uhci_hcd 0000:00:1d.2: PCI INT C disabled
uhci_hcd 0000:00:1d.1: PCI INT B disabled
uhci_hcd 0000:00:1d.0: PCI INT A disabled
HDA Intel 0000:00:1b.0: PCI INT B disabled
ehci_hcd 0000:00:1a.7: PCI INT D disabled
ehci_hcd 0000:00:1a.7: PME# disabled
uhci_hcd 0000:00:1a.2: PCI INT C disabled
uhci_hcd 0000:00:1a.1: PCI INT B disabled
uhci_hcd 0000:00:1a.0: PCI INT A disabled
e1000e 0000:00:19.0: PME# enabled
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
e1000e 0000:00:19.0: PME# enabled
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
e1000e 0000:00:19.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching NULL sched-domain.
CPU1 is down
Extended CMOS year: 2000
PM: Creating hibernation image:
PM: Need to copy 123629 pages
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
PM: Restoring platform NVS memory
Extended CMOS year: 2000
pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5054.07 BogoMIPS (lpj=10108145)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
[ds] using Core 2/Atom configuration
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
CPU0 attaching NULL sched-domain.
Switched to high resolution mode on CPU 1
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
CPU1 is up
ACPI: Waking up from system sleep state S4
ACPI: EC: non-query interrupt received, switching to interrupt mode
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.0: power state changed by ACPI to D0
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.1: PME# disabled
pci 0000:00:03.0: PME# disabled
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
e1000e 0000:00:19.0: PME# disabled
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
e1000e 0000:00:19.0: PME# disabled
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
ehci_hcd 0000:00:1a.7: PME# disabled
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: PME# disabled
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.4: setting latency timer to 64
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
ehci_hcd 0000:00:1d.7: PME# disabled
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x16 frozen
ata2: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x16 frozen
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT contexts=[4/4]
pci 0000:15:00.2: PME# disabled
pci 0000:15:00.3: PME# disabled
pci 0000:15:00.4: PME# disabled
pci 0000:15:00.5: PME# disabled
sd 0:0:0:0: [sda] Starting disk
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/133
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
ata1: irq_stat 0x00400040, connection status changed
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/133
ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
ata2: irq_stat 0x40000001
ata2.00: configured for UDMA/133
ata2: EH complete
pci 0000:00:02.0: power state changed by ACPI to D0
pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900407, writing 0x900403)
pci 0000:00:02.0: setting latency timer to 64
Restarting tasks ... done.
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
0000:00:19.0: eth0: 10/100 speed: disabling TSO
usb 6-2: reset low speed USB device using uhci_hcd and address 2
Apr 2 12:31:41 linux-7vph kernel: Syncing filesystems ... done.
Apr 2 12:31:41 linux-7vph kernel: Freezing user space processes ... (elapsed 0.00 seconds) done.
Apr 2 12:31:41 linux-7vph kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Apr 2 12:31:41 linux-7vph kernel: PM: Shrinking memory... done (21792 pages freed)
Apr 2 12:31:41 linux-7vph kernel: PM: Freed 87168 kbytes in 1.41 seconds (61.82 MB/s)
Apr 2 12:31:41 linux-7vph kernel: Suspending console(s) (use no_console_suspend to debug)
Apr 2 12:31:41 linux-7vph kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 2 12:31:41 linux-7vph kernel: ACPI handle has no context!
Apr 2 12:31:42 linux-7vph kernel: iwlagn 0000:03:00.0: PCI INT A disabled
Apr 2 12:31:42 linux-7vph kernel: ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Apr 2 12:31:42 linux-7vph kernel: ata2: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Apr 2 12:31:42 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PCI INT D disabled
Apr 2 12:31:42 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 2 12:31:42 linux-7vph kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
Apr 2 12:31:42 linux-7vph kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
Apr 2 12:31:42 linux-7vph kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
Apr 2 12:31:42 linux-7vph kernel: HDA Intel 0000:00:1b.0: PCI INT B disabled
Apr 2 12:31:42 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PCI INT D disabled
Apr 2 12:31:44 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PME# disabled
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1a.2: PCI INT C disabled
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1a.1: PCI INT B disabled
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1a.0: PCI INT A disabled
Apr 2 12:31:44 linux-7vph kernel: e1000e 0000:00:19.0: PME# enabled
Apr 2 12:31:44 linux-7vph kernel: e1000e 0000:00:19.0: wake-up capability enabled by ACPI
Apr 2 12:31:44 linux-7vph kernel: e1000e 0000:00:19.0: PME# enabled
Apr 2 12:31:44 linux-7vph kernel: e1000e 0000:00:19.0: wake-up capability enabled by ACPI
Apr 2 12:31:44 linux-7vph kernel: e1000e 0000:00:19.0: PCI INT A disabled
Apr 2 12:31:44 linux-7vph kernel: ACPI: Preparing to enter system sleep state S4
Apr 2 12:31:44 linux-7vph kernel: PM: Saving platform NVS memory
Apr 2 12:31:44 linux-7vph kernel: Disabling non-boot CPUs ...
Apr 2 12:31:44 linux-7vph kernel: CPU 1 is now offline
Apr 2 12:31:44 linux-7vph kernel: SMP alternatives: switching to UP code
Apr 2 12:31:44 linux-7vph kernel: CPU0 attaching NULL sched-domain.
Apr 2 12:31:44 linux-7vph kernel: CPU1 attaching NULL sched-domain.
Apr 2 12:31:44 linux-7vph kernel: CPU0 attaching NULL sched-domain.
Apr 2 12:31:44 linux-7vph kernel: CPU1 is down
Apr 2 12:31:44 linux-7vph kernel: Extended CMOS year: 2000
Apr 2 12:31:44 linux-7vph kernel: PM: Creating hibernation image:
Apr 2 12:31:44 linux-7vph kernel: PM: Need to copy 123725 pages
Apr 2 12:31:44 linux-7vph kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Apr 2 12:31:44 linux-7vph kernel: Intel machine check architecture supported.
Apr 2 12:31:44 linux-7vph kernel: Intel machine check reporting enabled on CPU#0.
Apr 2 12:31:44 linux-7vph kernel: PM: Restoring platform NVS memory
Apr 2 12:31:44 linux-7vph kernel: Extended CMOS year: 2000
Apr 2 12:31:44 linux-7vph kernel: pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
Apr 2 12:31:44 linux-7vph kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
Apr 2 12:31:44 linux-7vph kernel: ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
Apr 2 12:31:44 linux-7vph kernel: Enabling non-boot CPUs ...
Apr 2 12:31:44 linux-7vph kernel: SMP alternatives: switching to SMP code
Apr 2 12:31:44 linux-7vph kernel: Booting processor 1 APIC 0x1 ip 0x6000
Apr 2 12:31:44 linux-7vph kernel: Initializing CPU#1
Apr 2 12:31:44 linux-7vph kernel: Calibrating delay using timer specific routine.. 4692.14 BogoMIPS (lpj=9384289)
Apr 2 12:31:44 linux-7vph kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Apr 2 12:31:44 linux-7vph kernel: CPU: L2 cache: 6144K
Apr 2 12:31:44 linux-7vph kernel: [ds] using Core 2/Atom configuration
Apr 2 12:31:44 linux-7vph kernel: CPU: Physical Processor ID: 0
Apr 2 12:31:44 linux-7vph kernel: CPU: Processor Core ID: 1
Apr 2 12:31:44 linux-7vph kernel: Intel machine check architecture supported.
Apr 2 12:31:44 linux-7vph kernel: Intel machine check reporting enabled on CPU#1.
Apr 2 12:31:44 linux-7vph kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Apr 2 12:31:44 linux-7vph kernel: CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
Apr 2 12:31:44 linux-7vph kernel: CPU0 attaching NULL sched-domain.
Apr 2 12:31:44 linux-7vph kernel: Switched to high resolution mode on CPU 1
Apr 2 12:31:44 linux-7vph kernel: CPU0 attaching sched-domain:
Apr 2 12:31:44 linux-7vph kernel: domain 0: span 0-1 level MC
Apr 2 12:31:44 linux-7vph kernel: groups: 0 1
Apr 2 12:31:44 linux-7vph kernel: CPU1 attaching sched-domain:
Apr 2 12:31:44 linux-7vph kernel: domain 0: span 0-1 level MC
Apr 2 12:31:44 linux-7vph kernel: groups: 1 0
Apr 2 12:31:44 linux-7vph kernel: CPU1 is up
Apr 2 12:31:44 linux-7vph kernel: ACPI: Waking up from system sleep state S4
Apr 2 12:31:44 linux-7vph kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
Apr 2 12:31:44 linux-7vph kernel: pci 0000:00:02.0: PME# disabled
Apr 2 12:31:44 linux-7vph kernel: pci 0000:00:02.0: power state changed by ACPI to D0
Apr 2 12:31:44 linux-7vph kernel: pci 0000:00:02.0: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: pci 0000:00:02.1: PME# disabled
Apr 2 12:31:44 linux-7vph kernel: pci 0000:00:03.0: PME# disabled
Apr 2 12:31:44 linux-7vph kernel: e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr 2 12:31:44 linux-7vph kernel: e1000e 0000:00:19.0: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: e1000e 0000:00:19.0: wake-up capability disabled by ACPI
Apr 2 12:31:44 linux-7vph kernel: e1000e 0000:00:19.0: PME# disabled
Apr 2 12:31:44 linux-7vph kernel: e1000e 0000:00:19.0: wake-up capability disabled by ACPI
Apr 2 12:31:44 linux-7vph kernel: e1000e 0000:00:19.0: PME# disabled
Apr 2 12:31:44 linux-7vph kernel: e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1a.2: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PME# disabled
Apr 2 12:31:44 linux-7vph kernel: ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
Apr 2 12:31:44 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
Apr 2 12:31:44 linux-7vph kernel: ehci_hcd 0000:00:1a.7: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PME# disabled
Apr 2 12:31:44 linux-7vph kernel: HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 2 12:31:44 linux-7vph kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: pcieport-driver 0000:00:1c.0: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: pcieport-driver 0000:00:1c.1: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: pcieport-driver 0000:00:1c.3: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: pcieport-driver 0000:00:1c.4: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr 2 12:31:44 linux-7vph kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 2 12:31:44 linux-7vph kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Apr 2 12:31:44 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr 2 12:31:44 linux-7vph kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 2 12:31:44 linux-7vph kernel: pci 0000:00:1e.0: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: ahci 0000:00:1f.2: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x16 frozen
Apr 2 12:31:44 linux-7vph kernel: ata2: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x16 frozen
Apr 2 12:31:44 linux-7vph kernel: iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Apr 2 12:31:44 linux-7vph kernel: iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X
Apr 2 12:31:44 linux-7vph kernel: pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 2 12:31:44 linux-7vph kernel: Registered led device: iwl-phy0:radio
Apr 2 12:31:44 linux-7vph kernel: Registered led device: iwl-phy0:assoc
Apr 2 12:31:44 linux-7vph kernel: Registered led device: iwl-phy0:RX
Apr 2 12:31:44 linux-7vph kernel: Registered led device: iwl-phy0:TX
Apr 2 12:31:44 linux-7vph kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT contexts=[4/4]
Apr 2 12:31:44 linux-7vph kernel: pci 0000:15:00.2: PME# disabled
Apr 2 12:31:44 linux-7vph kernel: pci 0000:15:00.3: PME# disabled
Apr 2 12:31:44 linux-7vph kernel: pci 0000:15:00.4: PME# disabled
Apr 2 12:31:44 linux-7vph kernel: pci 0000:15:00.5: PME# disabled
Apr 2 12:31:44 linux-7vph kernel: sd 0:0:0:0: [sda] Starting disk
Apr 2 12:31:44 linux-7vph kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 2 12:31:44 linux-7vph kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 2 12:31:44 linux-7vph kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
Apr 2 12:31:44 linux-7vph kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Apr 2 12:31:44 linux-7vph kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
Apr 2 12:31:44 linux-7vph kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Apr 2 12:31:44 linux-7vph kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
Apr 2 12:31:44 linux-7vph kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Apr 2 12:31:44 linux-7vph kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
Apr 2 12:31:44 linux-7vph kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Apr 2 12:31:44 linux-7vph kernel: ata1.00: configured for UDMA/133
Apr 2 12:31:44 linux-7vph kernel: ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
Apr 2 12:31:44 linux-7vph kernel: ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
Apr 2 12:31:44 linux-7vph kernel: ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
Apr 2 12:31:44 linux-7vph kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
Apr 2 12:31:44 linux-7vph kernel: ata1: irq_stat 0x00400040, connection status changed
Apr 2 12:31:44 linux-7vph kernel: ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
Apr 2 12:31:44 linux-7vph kernel: ata1.00: configured for UDMA/133
Apr 2 12:31:44 linux-7vph kernel: ata1: EH complete
Apr 2 12:31:44 linux-7vph kernel: sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
Apr 2 12:31:44 linux-7vph kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 2 12:31:44 linux-7vph kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 2 12:31:44 linux-7vph kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 2 12:31:44 linux-7vph kernel: sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
Apr 2 12:31:44 linux-7vph kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 2 12:31:44 linux-7vph kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 2 12:31:44 linux-7vph kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 2 12:31:44 linux-7vph kernel: ata2.00: configured for UDMA/133
Apr 2 12:31:44 linux-7vph kernel: ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
Apr 2 12:31:44 linux-7vph kernel: ata2: irq_stat 0x40000001
Apr 2 12:31:44 linux-7vph kernel: ata2.00: configured for UDMA/133
Apr 2 12:31:44 linux-7vph kernel: ata2: EH complete
Apr 2 12:31:44 linux-7vph kernel: pci 0000:00:02.0: power state changed by ACPI to D0
Apr 2 12:31:44 linux-7vph kernel: pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900407, writing 0x900403)
Apr 2 12:31:44 linux-7vph kernel: pci 0000:00:02.0: setting latency timer to 64
Apr 2 12:31:44 linux-7vph kernel: Restarting tasks ... done.
Apr 2 12:31:44 linux-7vph kernel: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
Apr 2 12:31:44 linux-7vph kernel: 0000:00:19.0: eth0: 10/100 speed: disabling TSO