[PATCH 04/57] microblaze_v7: Open firmware files

From: monstr
Date: Wed Mar 18 2009 - 16:34:06 EST


From: Michal Simek <monstr@xxxxxxxxx>


Signed-off-by: Michal Simek <monstr@xxxxxxxxx>
---
arch/microblaze/include/asm/of_device.h | 45 ++
arch/microblaze/include/asm/of_platform.h | 64 ++
arch/microblaze/include/asm/prom.h | 313 ++++++++
arch/microblaze/kernel/of_device.c | 115 +++
arch/microblaze/kernel/of_platform.c | 201 +++++
arch/microblaze/kernel/prom.c | 1147 +++++++++++++++++++++++++++++
arch/microblaze/kernel/prom_parse.c | 1025 ++++++++++++++++++++++++++
7 files changed, 2910 insertions(+), 0 deletions(-)
create mode 100644 arch/microblaze/include/asm/of_device.h
create mode 100644 arch/microblaze/include/asm/of_platform.h
create mode 100644 arch/microblaze/include/asm/prom.h
create mode 100644 arch/microblaze/kernel/of_device.c
create mode 100644 arch/microblaze/kernel/of_platform.c
create mode 100644 arch/microblaze/kernel/prom.c
create mode 100644 arch/microblaze/kernel/prom_parse.c

diff --git a/arch/microblaze/include/asm/of_device.h b/arch/microblaze/include/asm/of_device.h
new file mode 100644
index 0000000..ba917cf
--- /dev/null
+++ b/arch/microblaze/include/asm/of_device.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@xxxxxxxxx>
+ *
+ * based on PowerPC of_device.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_OF_DEVICE_H
+#define _ASM_MICROBLAZE_OF_DEVICE_H
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/of.h>
+
+/*
+ * The of_device is a kind of "base class" that is a superset of
+ * struct device for use by devices attached to an OF node and
+ * probed using OF properties.
+ */
+struct of_device {
+ struct device_node *node; /* to be obsoleted */
+ u64 dma_mask; /* DMA mask */
+ struct device dev; /* Generic device interface */
+};
+
+extern ssize_t of_device_get_modalias(struct of_device *ofdev,
+ char *str, ssize_t len);
+
+extern struct of_device *of_device_alloc(struct device_node *np,
+ const char *bus_id,
+ struct device *parent);
+
+extern int of_device_uevent(struct device *dev,
+ struct kobj_uevent_env *env);
+
+extern void of_device_make_bus_id(struct of_device *dev);
+
+/* This is just here during the transition */
+#include <linux/of_device.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_OF_DEVICE_H */
diff --git a/arch/microblaze/include/asm/of_platform.h b/arch/microblaze/include/asm/of_platform.h
new file mode 100644
index 0000000..187c0ee
--- /dev/null
+++ b/arch/microblaze/include/asm/of_platform.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@xxxxxxxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MICROBLAZE_OF_PLATFORM_H
+#define _ASM_MICROBLAZE_OF_PLATFORM_H
+
+/* This is just here during the transition */
+#include <linux/of_platform.h>
+
+/*
+ * The list of OF IDs below is used for matching bus types in the
+ * system whose devices are to be exposed as of_platform_devices.
+ *
+ * This is the default list valid for most platforms. This file provides
+ * functions who can take an explicit list if necessary though
+ *
+ * The search is always performed recursively looking for children of
+ * the provided device_node and recursively if such a children matches
+ * a bus type in the list
+ */
+
+static const struct of_device_id of_default_bus_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .type = "plb5", },
+ { .type = "plb4", },
+ { .type = "opb", },
+ { .type = "simple", },
+ {},
+};
+
+/* Platform drivers register/unregister */
+static inline int of_register_platform_driver(struct of_platform_driver *drv)
+{
+ return of_register_driver(drv, &of_platform_bus_type);
+}
+static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
+{
+ of_unregister_driver(drv);
+}
+
+/* Platform devices and busses creation */
+extern struct of_device *of_platform_device_create(struct device_node *np,
+ const char *bus_id,
+ struct device *parent);
+/* pseudo "matches" value to not do deep probe */
+#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1)
+
+extern int of_platform_bus_probe(struct device_node *root,
+ const struct of_device_id *matches,
+ struct device *parent);
+
+extern struct of_device *of_find_device_by_phandle(phandle ph);
+
+extern void of_instantiate_rtc(void);
+
+#endif /* _ASM_MICROBLAZE_OF_PLATFORM_H */
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
new file mode 100644
index 0000000..20f7b3a
--- /dev/null
+++ b/arch/microblaze/include/asm/prom.h
@@ -0,0 +1,313 @@
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MICROBLAZE_PROM_H
+#define _ASM_MICROBLAZE_PROM_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/platform_device.h>
+#include <asm/irq.h>
+#include <asm/atomic.h>
+
+#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1
+#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
+
+#define of_compat_cmp(s1, s2, l) strncasecmp((s1), (s2), (l))
+#define of_prop_cmp(s1, s2) strcmp((s1), (s2))
+#define of_node_cmp(s1, s2) strcasecmp((s1), (s2))
+
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER 0xd00dfeed /* marker */
+#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */
+#define OF_DT_END_NODE 0x2 /* End node */
+#define OF_DT_PROP 0x3 /* Property: name off, size, content */
+#define OF_DT_NOP 0x4 /* nop */
+#define OF_DT_END 0x9
+
+#define OF_DT_VERSION 0x10
+
+/*
+ * This is what gets passed to the kernel by prom_init or kexec
+ *
+ * The dt struct contains the device tree structure, full pathes and
+ * property contents. The dt strings contain a separate block with just
+ * the strings for the property names, and is fully page aligned and
+ * self contained in a page, so that it can be kept around by the kernel,
+ * each property name appears only once in this page (cheap compression)
+ *
+ * the mem_rsvmap contains a map of reserved ranges of physical memory,
+ * passing it here instead of in the device-tree itself greatly simplifies
+ * the job of everybody. It's just a list of u64 pairs (base/size) that
+ * ends when size is 0
+ */
+struct boot_param_header {
+ u32 magic; /* magic word OF_DT_HEADER */
+ u32 totalsize; /* total size of DT block */
+ u32 off_dt_struct; /* offset to structure */
+ u32 off_dt_strings; /* offset to strings */
+ u32 off_mem_rsvmap; /* offset to memory reserve map */
+ u32 version; /* format version */
+ u32 last_comp_version; /* last compatible version */
+ /* version 2 fields below */
+ u32 boot_cpuid_phys; /* Physical CPU id we're booting on */
+ /* version 3 fields below */
+ u32 dt_strings_size; /* size of the DT strings block */
+ /* version 17 fields below */
+ u32 dt_struct_size; /* size of the DT structure block */
+};
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+struct property {
+ char *name;
+ int length;
+ void *value;
+ struct property *next;
+};
+
+struct device_node {
+ const char *name;
+ const char *type;
+ phandle node;
+ phandle linux_phandle;
+ char *full_name;
+
+ struct property *properties;
+ struct property *deadprops; /* removed properties */
+ struct device_node *parent;
+ struct device_node *child;
+ struct device_node *sibling;
+ struct device_node *next; /* next device of same type */
+ struct device_node *allnext; /* next in list of all nodes */
+ struct proc_dir_entry *pde; /* this node's proc directory */
+ struct kref kref;
+ unsigned long _flags;
+ void *data;
+};
+
+extern struct device_node *of_chosen;
+
+static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
+{
+ return test_bit(flag, &n->_flags);
+}
+
+static inline void of_node_set_flag(struct device_node *n, unsigned long flag)
+{
+ set_bit(flag, &n->_flags);
+}
+
+#define HAVE_ARCH_DEVTREE_FIXUPS
+
+static inline void set_node_proc_entry(struct device_node *dn,
+ struct proc_dir_entry *de)
+{
+ dn->pde = de;
+}
+
+extern struct device_node *allnodes; /* temporary while merging */
+extern rwlock_t devtree_lock; /* temporary while merging */
+
+extern struct device_node *of_find_all_nodes(struct device_node *prev);
+extern struct device_node *of_node_get(struct device_node *node);
+extern void of_node_put(struct device_node *node);
+
+/* For scanning the flat device-tree at boot time */
+extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
+ const char *uname, int depth,
+ void *data),
+ void *data);
+extern void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
+ unsigned long *size);
+extern int __init
+ of_flat_dt_is_compatible(unsigned long node, const char *name);
+extern unsigned long __init of_get_flat_dt_root(void);
+
+/* For updating the device tree at runtime */
+extern void of_attach_node(struct device_node *);
+extern void of_detach_node(struct device_node *);
+
+/* Other Prototypes */
+extern void finish_device_tree(void);
+extern void unflatten_device_tree(void);
+extern int early_uartlite_console(void);
+extern void early_init_devtree(void *);
+extern int machine_is_compatible(const char *compat);
+extern void print_properties(struct device_node *node);
+extern int prom_n_intr_cells(struct device_node *np);
+extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
+extern int prom_add_property(struct device_node *np, struct property *prop);
+extern int prom_remove_property(struct device_node *np, struct property *prop);
+extern int prom_update_property(struct device_node *np,
+ struct property *newprop,
+ struct property *oldprop);
+
+extern struct resource *request_OF_resource(struct device_node *node,
+ int index, const char *name_postfix);
+extern int release_OF_resource(struct device_node *node, int index);
+
+/*
+ * OF address retreival & translation
+ */
+
+/* Helper to read a big number; size is in cells (not bytes) */
+static inline u64 of_read_number(const u32 *cell, int size)
+{
+ u64 r = 0;
+ while (size--)
+ r = (r << 32) | *(cell++);
+ return r;
+}
+
+/* Like of_read_number, but we want an unsigned long result */
+#define of_read_ulong(cell, size) of_read_number(cell, size)
+
+/* Translate an OF address block into a CPU physical address
+ */
+extern u64 of_translate_address(struct device_node *np, const u32 *addr);
+
+/* Extract an address from a device, returns the region size and
+ * the address space flags too. The PCI version uses a BAR number
+ * instead of an absolute index
+ */
+extern const u32 *of_get_address(struct device_node *dev, int index,
+ u64 *size, unsigned int *flags);
+extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no,
+ u64 *size, unsigned int *flags);
+
+/* Get an address as a resource. Note that if your address is
+ * a PIO address, the conversion will fail if the physical address
+ * can't be internally converted to an IO token with
+ * pci_address_to_pio(), that is because it's either called to early
+ * or it can't be matched to any host bridge IO space
+ */
+extern int of_address_to_resource(struct device_node *dev, int index,
+ struct resource *r);
+extern int of_pci_address_to_resource(struct device_node *dev, int bar,
+ struct resource *r);
+
+/* Parse the ibm,dma-window property of an OF node into the busno, phys and
+ * size parameters.
+ */
+void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
+ unsigned long *busno, unsigned long *phys, unsigned long *size);
+
+extern void kdump_move_device_tree(void);
+
+/* CPU OF node matching */
+struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
+
+/* Get the MAC address */
+extern const void *of_get_mac_address(struct device_node *np);
+
+/*
+ * OF interrupt mapping
+ */
+
+/* This structure is returned when an interrupt is mapped. The controller
+ * field needs to be put() after use
+ */
+
+#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */
+
+struct of_irq {
+ struct device_node *controller; /* Interrupt controller node */
+ u32 size; /* Specifier size */
+ u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
+};
+
+/**
+ * of_irq_map_init - Initialize the irq remapper
+ * @flags: flags defining workarounds to enable
+ *
+ * Some machines have bugs in the device-tree which require certain workarounds
+ * to be applied. Call this before any interrupt mapping attempts to enable
+ * those workarounds.
+ */
+#define OF_IMAP_OLDWORLD_MAC 0x00000001
+#define OF_IMAP_NO_PHANDLE 0x00000002
+
+extern void of_irq_map_init(unsigned int flags);
+
+/**
+ * of_irq_map_raw - Low level interrupt tree parsing
+ * @parent: the device interrupt parent
+ * @intspec: interrupt specifier ("interrupts" property of the device)
+ * @ointsize: size of the passed in interrupt specifier
+ * @addr: address specifier (start of "reg" property of the device)
+ * @out_irq: structure of_irq filled by this function
+ *
+ * Returns 0 on success and a negative number on error
+ *
+ * This function is a low-level interrupt tree walking function. It
+ * can be used to do a partial walk with synthetized reg and interrupts
+ * properties, for example when resolving PCI interrupts when no device
+ * node exist for the parent.
+ *
+ */
+
+extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
+ u32 ointsize, const u32 *addr,
+ struct of_irq *out_irq);
+
+/**
+ * of_irq_map_one - Resolve an interrupt for a device
+ * @device: the device whose interrupt is to be resolved
+ * @index: index of the interrupt to resolve
+ * @out_irq: structure of_irq filled by this function
+ *
+ * This function resolves an interrupt, walking the tree, for a given
+ * device-tree node. It's the high level pendant to of_irq_map_raw().
+ * It also implements the workarounds for OldWolrd Macs.
+ */
+extern int of_irq_map_one(struct device_node *device, int index,
+ struct of_irq *out_irq);
+
+/**
+ * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * @pdev: the device whose interrupt is to be resolved
+ * @out_irq: structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+struct pci_dev;
+extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
+
+extern int of_irq_to_resource(struct device_node *dev, int index,
+ struct resource *r);
+
+/**
+ * of_iomap - Maps the memory mapped IO for a given device_node
+ * @device: the device whose io range will be mapped
+ * @index: index of the io range
+ *
+ * Returns a pointer to the mapped memory
+ */
+extern void __iomem *of_iomap(struct device_node *device, int index);
+
+/*
+ * NB: This is here while we transition from using asm/prom.h
+ * to linux/of.h
+ */
+#include <linux/of.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_PROM_H */
diff --git a/arch/microblaze/kernel/of_device.c b/arch/microblaze/kernel/of_device.c
new file mode 100644
index 0000000..717edf4
--- /dev/null
+++ b/arch/microblaze/kernel/of_device.c
@@ -0,0 +1,115 @@
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+
+#include <linux/errno.h>
+
+void of_device_make_bus_id(struct of_device *dev)
+{
+ static atomic_t bus_no_reg_magic;
+ struct device_node *node = dev->node;
+ char *name = dev->dev.bus_id;
+ const u32 *reg;
+ u64 addr;
+ int magic;
+
+ /*
+ * For MMIO, get the physical address
+ */
+ reg = of_get_property(node, "reg", NULL);
+ if (reg) {
+ addr = of_translate_address(node, reg);
+ if (addr != OF_BAD_ADDR) {
+ snprintf(name, BUS_ID_SIZE,
+ "%llx.%s", (unsigned long long)addr,
+ node->name);
+ return;
+ }
+ }
+
+ /*
+ * No BusID, use the node name and add a globally incremented
+ * counter (and pray...)
+ */
+ magic = atomic_add_return(1, &bus_no_reg_magic);
+ snprintf(name, BUS_ID_SIZE, "%s.%d", node->name, magic - 1);
+}
+EXPORT_SYMBOL(of_device_make_bus_id);
+
+struct of_device *of_device_alloc(struct device_node *np,
+ const char *bus_id,
+ struct device *parent)
+{
+ struct of_device *dev;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ dev->node = of_node_get(np);
+ dev->dev.dma_mask = &dev->dma_mask;
+ dev->dev.parent = parent;
+ dev->dev.release = of_release_dev;
+ dev->dev.archdata.of_node = np;
+
+ if (bus_id)
+ strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE);
+ else
+ of_device_make_bus_id(dev);
+
+ return dev;
+}
+EXPORT_SYMBOL(of_device_alloc);
+
+int of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ struct of_device *ofdev;
+ const char *compat;
+ int seen = 0, cplen, sl;
+
+ if (!dev)
+ return -ENODEV;
+
+ ofdev = to_of_device(dev);
+
+ if (add_uevent_var(env, "OF_NAME=%s", ofdev->node->name))
+ return -ENOMEM;
+
+ if (add_uevent_var(env, "OF_TYPE=%s", ofdev->node->type))
+ return -ENOMEM;
+
+ /* Since the compatible field can contain pretty much anything
+ * it's not really legal to split it out with commas. We split it
+ * up using a number of environment variables instead. */
+
+ compat = of_get_property(ofdev->node, "compatible", &cplen);
+ while (compat && *compat && cplen > 0) {
+ if (add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat))
+ return -ENOMEM;
+
+ sl = strlen(compat) + 1;
+ compat += sl;
+ cplen -= sl;
+ seen++;
+ }
+
+ if (add_uevent_var(env, "OF_COMPATIBLE_N=%d", seen))
+ return -ENOMEM;
+
+ /* modalias is trickier, we add it in 2 steps */
+ if (add_uevent_var(env, "MODALIAS="))
+ return -ENOMEM;
+ sl = of_device_get_modalias(ofdev, &env->buf[env->buflen-1],
+ sizeof(env->buf) - env->buflen);
+ if (sl >= (sizeof(env->buf) - env->buflen))
+ return -ENOMEM;
+ env->buflen += sl;
+
+ return 0;
+}
+EXPORT_SYMBOL(of_device_uevent);
diff --git a/arch/microblaze/kernel/of_platform.c b/arch/microblaze/kernel/of_platform.c
new file mode 100644
index 0000000..acf4574
--- /dev/null
+++ b/arch/microblaze/kernel/of_platform.c
@@ -0,0 +1,201 @@
+/*
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@xxxxxxxxxxxxxxxxxxx>
+ * and Arnd Bergmann, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#include <linux/errno.h>
+#include <linux/topology.h>
+#include <asm/atomic.h>
+
+struct bus_type of_platform_bus_type = {
+ .uevent = of_device_uevent,
+};
+EXPORT_SYMBOL(of_platform_bus_type);
+
+static int __init of_bus_driver_init(void)
+{
+ return of_bus_type_init(&of_platform_bus_type, "of_platform");
+}
+postcore_initcall(of_bus_driver_init);
+
+struct of_device *of_platform_device_create(struct device_node *np,
+ const char *bus_id,
+ struct device *parent)
+{
+ struct of_device *dev;
+
+ dev = of_device_alloc(np, bus_id, parent);
+ if (!dev)
+ return NULL;
+
+ dev->dma_mask = 0xffffffffUL;
+ dev->dev.bus = &of_platform_bus_type;
+
+ /* We do not fill the DMA ops for platform devices by default.
+ * This is currently the responsibility of the platform code
+ * to do such, possibly using a device notifier
+ */
+
+ if (of_device_register(dev) != 0) {
+ of_device_free(dev);
+ return NULL;
+ }
+
+ return dev;
+}
+EXPORT_SYMBOL(of_platform_device_create);
+
+/**
+ * of_platform_bus_create - Create an OF device for a bus node and all its
+ * children. Optionally recursively instanciate matching busses.
+ * @bus: device node of the bus to instanciate
+ * @matches: match table, NULL to use the default, OF_NO_DEEP_PROBE to
+ * disallow recursive creation of child busses
+ */
+static int of_platform_bus_create(const struct device_node *bus,
+ const struct of_device_id *matches,
+ struct device *parent)
+{
+ struct device_node *child;
+ struct of_device *dev;
+ int rc = 0;
+
+ for_each_child_of_node(bus, child) {
+ pr_debug(" create child: %s\n", child->full_name);
+ dev = of_platform_device_create(child, NULL, parent);
+ if (dev == NULL)
+ rc = -ENOMEM;
+ else if (!of_match_node(matches, child))
+ continue;
+ if (rc == 0) {
+ pr_debug(" and sub busses\n");
+ rc = of_platform_bus_create(child, matches, &dev->dev);
+ }
+ if (rc) {
+ of_node_put(child);
+ break;
+ }
+ }
+ return rc;
+}
+
+
+/**
+ * of_platform_bus_probe - Probe the device-tree for platform busses
+ * @root: parent of the first level to probe or NULL for the root of the tree
+ * @matches: match table, NULL to use the default
+ * @parent: parent to hook devices from, NULL for toplevel
+ *
+ * Note that children of the provided root are not instanciated as devices
+ * unless the specified root itself matches the bus list and is not NULL.
+ */
+
+int of_platform_bus_probe(struct device_node *root,
+ const struct of_device_id *matches,
+ struct device *parent)
+{
+ struct device_node *child;
+ struct of_device *dev;
+ int rc = 0;
+
+ if (matches == NULL)
+ matches = of_default_bus_ids;
+ if (matches == OF_NO_DEEP_PROBE)
+ return -EINVAL;
+ if (root == NULL)
+ root = of_find_node_by_path("/");
+ else
+ of_node_get(root);
+
+ pr_debug("of_platform_bus_probe()\n");
+ pr_debug(" starting at: %s\n", root->full_name);
+
+ /* Do a self check of bus type, if there's a match, create
+ * children
+ */
+ if (of_match_node(matches, root)) {
+ pr_debug(" root match, create all sub devices\n");
+ dev = of_platform_device_create(root, NULL, parent);
+ if (dev == NULL) {
+ rc = -ENOMEM;
+ goto bail;
+ }
+ pr_debug(" create all sub busses\n");
+ rc = of_platform_bus_create(root, matches, &dev->dev);
+ goto bail;
+ }
+ for_each_child_of_node(root, child) {
+ if (!of_match_node(matches, child))
+ continue;
+
+ pr_debug(" match: %s\n", child->full_name);
+ dev = of_platform_device_create(child, NULL, parent);
+ if (dev == NULL)
+ rc = -ENOMEM;
+ else
+ rc = of_platform_bus_create(child, matches, &dev->dev);
+ if (rc) {
+ of_node_put(child);
+ break;
+ }
+ }
+ bail:
+ of_node_put(root);
+ return rc;
+}
+EXPORT_SYMBOL(of_platform_bus_probe);
+
+static int of_dev_node_match(struct device *dev, void *data)
+{
+ return to_of_device(dev)->node == data;
+}
+
+struct of_device *of_find_device_by_node(struct device_node *np)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&of_platform_bus_type,
+ NULL, np, of_dev_node_match);
+ if (dev)
+ return to_of_device(dev);
+ return NULL;
+}
+EXPORT_SYMBOL(of_find_device_by_node);
+
+static int of_dev_phandle_match(struct device *dev, void *data)
+{
+ phandle *ph = data;
+ return to_of_device(dev)->node->linux_phandle == *ph;
+}
+
+struct of_device *of_find_device_by_phandle(phandle ph)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&of_platform_bus_type,
+ NULL, &ph, of_dev_phandle_match);
+ if (dev)
+ return to_of_device(dev);
+ return NULL;
+}
+EXPORT_SYMBOL(of_find_device_by_phandle);
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
new file mode 100644
index 0000000..475b1fa
--- /dev/null
+++ b/arch/microblaze/kernel/prom.c
@@ -0,0 +1,1147 @@
+/*
+ * Procedures for creating, accessing and interpreting the device tree.
+ *
+ * Paul Mackerras August 1996.
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
+ * {engebret|bergner}@us.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <stdarg.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/stringify.h>
+#include <linux/delay.h>
+#include <linux/initrd.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/kexec.h>
+#include <linux/debugfs.h>
+#include <linux/irq.h>
+#include <linux/lmb.h>
+
+#include <asm/prom.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/irq.h>
+#include <linux/io.h>
+#include <asm/system.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <linux/pci.h>
+#include <asm/sections.h>
+#include <asm/pci-bridge.h>
+
+static int __initdata dt_root_addr_cells;
+static int __initdata dt_root_size_cells;
+
+typedef u32 cell_t;
+
+static struct boot_param_header *initial_boot_params;
+
+/* export that to outside world */
+struct device_node *of_chosen;
+
+static inline char *find_flat_dt_string(u32 offset)
+{
+ return ((char *)initial_boot_params) +
+ initial_boot_params->off_dt_strings + offset;
+}
+
+/**
+ * This function is used to scan the flattened device-tree, it is
+ * used to extract the memory informations at boot before we can
+ * unflatten the tree
+ */
+int __init of_scan_flat_dt(int (*it)(unsigned long node,
+ const char *uname, int depth,
+ void *data),
+ void *data)
+{
+ unsigned long p = ((unsigned long)initial_boot_params) +
+ initial_boot_params->off_dt_struct;
+ int rc = 0;
+ int depth = -1;
+
+ do {
+ u32 tag = *((u32 *)p);
+ char *pathp;
+
+ p += 4;
+ if (tag == OF_DT_END_NODE) {
+ depth--;
+ continue;
+ }
+ if (tag == OF_DT_NOP)
+ continue;
+ if (tag == OF_DT_END)
+ break;
+ if (tag == OF_DT_PROP) {
+ u32 sz = *((u32 *)p);
+ p += 8;
+ if (initial_boot_params->version < 0x10)
+ p = _ALIGN(p, sz >= 8 ? 8 : 4);
+ p += sz;
+ p = _ALIGN(p, 4);
+ continue;
+ }
+ if (tag != OF_DT_BEGIN_NODE) {
+ printk(KERN_WARNING "Invalid tag %x scanning flattened"
+ " device tree !\n", tag);
+ return -EINVAL;
+ }
+ depth++;
+ pathp = (char *)p;
+ p = _ALIGN(p + strlen(pathp) + 1, 4);
+ if ((*pathp) == '/') {
+ char *lp, *np;
+ for (lp = NULL, np = pathp; *np; np++)
+ if ((*np) == '/')
+ lp = np+1;
+ if (lp != NULL)
+ pathp = lp;
+ }
+ rc = it(p, pathp, depth, data);
+ if (rc != 0)
+ break;
+ } while (1);
+
+ return rc;
+}
+
+unsigned long __init of_get_flat_dt_root(void)
+{
+ unsigned long p = ((unsigned long)initial_boot_params) +
+ initial_boot_params->off_dt_struct;
+
+ while (*((u32 *)p) == OF_DT_NOP)
+ p += 4;
+ BUG_ON(*((u32 *)p) != OF_DT_BEGIN_NODE);
+ p += 4;
+ return _ALIGN(p + strlen((char *)p) + 1, 4);
+}
+
+/**
+ * This function can be used within scan_flattened_dt callback to get
+ * access to properties
+ */
+void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
+ unsigned long *size)
+{
+ unsigned long p = node;
+
+ do {
+ u32 tag = *((u32 *)p);
+ u32 sz, noff;
+ const char *nstr;
+
+ p += 4;
+ if (tag == OF_DT_NOP)
+ continue;
+ if (tag != OF_DT_PROP)
+ return NULL;
+
+ sz = *((u32 *)p);
+ noff = *((u32 *)(p + 4));
+ p += 8;
+ if (initial_boot_params->version < 0x10)
+ p = _ALIGN(p, sz >= 8 ? 8 : 4);
+
+ nstr = find_flat_dt_string(noff);
+ if (nstr == NULL) {
+ printk(KERN_WARNING "Can't find property index"
+ " name !\n");
+ return NULL;
+ }
+ if (strcmp(name, nstr) == 0) {
+ if (size)
+ *size = sz;
+ return (void *)p;
+ }
+ p += sz;
+ p = _ALIGN(p, 4);
+ } while (1);
+}
+
+int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
+{
+ const char *cp;
+ unsigned long cplen, l;
+
+ cp = of_get_flat_dt_prop(node, "compatible", &cplen);
+ if (cp == NULL)
+ return 0;
+ while (cplen > 0) {
+ if (strncasecmp(cp, compat, strlen(compat)) == 0)
+ return 1;
+ l = strlen(cp) + 1;
+ cp += l;
+ cplen -= l;
+ }
+
+ return 0;
+}
+
+static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
+ unsigned long align)
+{
+ void *res;
+
+ *mem = _ALIGN(*mem, align);
+ res = (void *)*mem;
+ *mem += size;
+
+ return res;
+}
+
+static unsigned long __init unflatten_dt_node(unsigned long mem,
+ unsigned long *p,
+ struct device_node *dad,
+ struct device_node ***allnextpp,
+ unsigned long fpsize)
+{
+ struct device_node *np;
+ struct property *pp, **prev_pp = NULL;
+ char *pathp;
+ u32 tag;
+ unsigned int l, allocl;
+ int has_name = 0;
+ int new_format = 0;
+
+ tag = *((u32 *)(*p));
+ if (tag != OF_DT_BEGIN_NODE) {
+ printk("Weird tag at start of node: %x\n", tag);
+ return mem;
+ }
+ *p += 4;
+ pathp = (char *)*p;
+ l = allocl = strlen(pathp) + 1;
+ *p = _ALIGN(*p + l, 4);
+
+ /* version 0x10 has a more compact unit name here instead of the full
+ * path. we accumulate the full path size using "fpsize", we'll rebuild
+ * it later. We detect this because the first character of the name is
+ * not '/'.
+ */
+ if ((*pathp) != '/') {
+ new_format = 1;
+ if (fpsize == 0) {
+ /* root node: special case. fpsize accounts for path
+ * plus terminating zero. root node only has '/', so
+ * fpsize should be 2, but we want to avoid the first
+ * level nodes to have two '/' so we use fpsize 1 here
+ */
+ fpsize = 1;
+ allocl = 2;
+ } else {
+ /* account for '/' and path size minus terminal 0
+ * already in 'l'
+ */
+ fpsize += l;
+ allocl = fpsize;
+ }
+ }
+
+ np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
+ __alignof__(struct device_node));
+ if (allnextpp) {
+ memset(np, 0, sizeof(*np));
+ np->full_name = ((char *)np) + sizeof(struct device_node);
+ if (new_format) {
+ char *p2 = np->full_name;
+ /* rebuild full path for new format */
+ if (dad && dad->parent) {
+ strcpy(p2, dad->full_name);
+#ifdef DEBUG
+ if ((strlen(p2) + l + 1) != allocl) {
+ pr_debug("%s: p: %d, l: %d, a: %d\n",
+ pathp, (int)strlen(p2),
+ l, allocl);
+ }
+#endif
+ p2 += strlen(p2);
+ }
+ *(p2++) = '/';
+ memcpy(p2, pathp, l);
+ } else
+ memcpy(np->full_name, pathp, l);
+ prev_pp = &np->properties;
+ **allnextpp = np;
+ *allnextpp = &np->allnext;
+ if (dad != NULL) {
+ np->parent = dad;
+ /* we temporarily use the next field as `last_child'*/
+ if (dad->next == NULL)
+ dad->child = np;
+ else
+ dad->next->sibling = np;
+ dad->next = np;
+ }
+ kref_init(&np->kref);
+ }
+ while (1) {
+ u32 sz, noff;
+ char *pname;
+
+ tag = *((u32 *)(*p));
+ if (tag == OF_DT_NOP) {
+ *p += 4;
+ continue;
+ }
+ if (tag != OF_DT_PROP)
+ break;
+ *p += 4;
+ sz = *((u32 *)(*p));
+ noff = *((u32 *)((*p) + 4));
+ *p += 8;
+ if (initial_boot_params->version < 0x10)
+ *p = _ALIGN(*p, sz >= 8 ? 8 : 4);
+
+ pname = find_flat_dt_string(noff);
+ if (pname == NULL) {
+ printk(KERN_INFO
+ "Can't find property name in list !\n");
+ break;
+ }
+ if (strcmp(pname, "name") == 0)
+ has_name = 1;
+ l = strlen(pname) + 1;
+ pp = unflatten_dt_alloc(&mem, sizeof(struct property),
+ __alignof__(struct property));
+ if (allnextpp) {
+ if (strcmp(pname, "linux,phandle") == 0) {
+ np->node = *((u32 *)*p);
+ if (np->linux_phandle == 0)
+ np->linux_phandle = np->node;
+ }
+ if (strcmp(pname, "ibm,phandle") == 0)
+ np->linux_phandle = *((u32 *)*p);
+ pp->name = pname;
+ pp->length = sz;
+ pp->value = (void *)*p;
+ *prev_pp = pp;
+ prev_pp = &pp->next;
+ }
+ *p = _ALIGN((*p) + sz, 4);
+ }
+ /* with version 0x10 we may not have the name property, recreate
+ * it here from the unit name if absent
+ */
+ if (!has_name) {
+ char *p1 = pathp, *ps = pathp, *pa = NULL;
+ int sz;
+
+ while (*p1) {
+ if ((*p1) == '@')
+ pa = p1;
+ if ((*p1) == '/')
+ ps = p1 + 1;
+ p1++;
+ }
+ if (pa < ps)
+ pa = p1;
+ sz = (pa - ps) + 1;
+ pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz,
+ __alignof__(struct property));
+ if (allnextpp) {
+ pp->name = "name";
+ pp->length = sz;
+ pp->value = pp + 1;
+ *prev_pp = pp;
+ prev_pp = &pp->next;
+ memcpy(pp->value, ps, sz - 1);
+ ((char *)pp->value)[sz - 1] = 0;
+ pr_debug("fixed up name for %s -> %s\n", pathp,
+ (char *)pp->value);
+ }
+ }
+ if (allnextpp) {
+ *prev_pp = NULL;
+ np->name = of_get_property(np, "name", NULL);
+ np->type = of_get_property(np, "device_type", NULL);
+
+ if (!np->name)
+ np->name = "<NULL>";
+ if (!np->type)
+ np->type = "<NULL>";
+ }
+ while (tag == OF_DT_BEGIN_NODE) {
+ mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
+ tag = *((u32 *)(*p));
+ }
+ if (tag != OF_DT_END_NODE) {
+ printk(KERN_INFO "Weird tag at end of node: %x\n", tag);
+ return mem;
+ }
+ *p += 4;
+ return mem;
+}
+
+/**
+ * unflattens the device-tree passed by the firmware, creating the
+ * tree of struct device_node. It also fills the "name" and "type"
+ * pointers of the nodes so the normal device-tree walking functions
+ * can be used (this used to be done by finish_device_tree)
+ */
+void __init unflatten_device_tree(void)
+{
+ unsigned long start, mem, size;
+ struct device_node **allnextp = &allnodes;
+
+ pr_debug(" -> unflatten_device_tree()\n");
+
+ /* First pass, scan for size */
+ start = ((unsigned long)initial_boot_params) +
+ initial_boot_params->off_dt_struct;
+ size = unflatten_dt_node(0, &start, NULL, NULL, 0);
+ size = (size | 3) + 1;
+
+ pr_debug(" size is %lx, allocating...\n", size);
+
+ /* Allocate memory for the expanded device tree */
+ mem = lmb_alloc(size + 4, __alignof__(struct device_node));
+ mem = (unsigned long) __va(mem);
+
+ ((u32 *)mem)[size / 4] = 0xdeadbeef;
+
+ pr_debug(" unflattening %lx...\n", mem);
+
+ /* Second pass, do actual unflattening */
+ start = ((unsigned long)initial_boot_params) +
+ initial_boot_params->off_dt_struct;
+ unflatten_dt_node(mem, &start, NULL, &allnextp, 0);
+ if (*((u32 *)start) != OF_DT_END)
+ printk(KERN_WARNING "Weird tag at end of tree: %08x\n",
+ *((u32 *)start));
+ if (((u32 *)mem)[size / 4] != 0xdeadbeef)
+ printk(KERN_WARNING "End of tree marker overwritten: %08x\n",
+ ((u32 *)mem)[size / 4]);
+ *allnextp = NULL;
+
+ /* Get pointer to OF "/chosen" node for use everywhere */
+ of_chosen = of_find_node_by_path("/chosen");
+ if (of_chosen == NULL)
+ of_chosen = of_find_node_by_path("/chosen@0");
+
+ pr_debug(" <- unflatten_device_tree()\n");
+}
+
+#define early_init_dt_scan_drconf_memory(node) 0
+
+static int __init early_init_dt_scan_cpus(unsigned long node,
+ const char *uname, int depth,
+ void *data)
+{
+ static int logical_cpuid;
+ char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+ const u32 *intserv;
+ int i, nthreads;
+ int found = 0;
+
+ /* We are scanning "cpu" nodes only */
+ if (type == NULL || strcmp(type, "cpu") != 0)
+ return 0;
+
+ /* Get physical cpuid */
+ intserv = of_get_flat_dt_prop(node, "reg", NULL);
+ nthreads = 1;
+
+ /*
+ * Now see if any of these threads match our boot cpu.
+ * NOTE: This must match the parsing done in smp_setup_cpu_maps.
+ */
+ for (i = 0; i < nthreads; i++) {
+ /*
+ * version 2 of the kexec param format adds the phys cpuid of
+ * booted proc.
+ */
+ if (initial_boot_params && initial_boot_params->version >= 2) {
+ if (intserv[i] ==
+ initial_boot_params->boot_cpuid_phys) {
+ found = 1;
+ break;
+ }
+ } else {
+ /*
+ * Check if it's the boot-cpu, set it's hw index now,
+ * unfortunately this format did not support booting
+ * off secondary threads.
+ */
+ if (of_get_flat_dt_prop(node,
+ "linux,boot-cpu", NULL) != NULL) {
+ found = 1;
+ break;
+ }
+ }
+
+#ifdef CONFIG_SMP
+ /* logical cpu id is always 0 on UP kernels */
+ logical_cpuid++;
+#endif
+ }
+
+ if (found) {
+ pr_debug("boot cpu: logical %d physical %d\n", logical_cpuid,
+ intserv[i]);
+ boot_cpuid = logical_cpuid;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+static void __init early_init_dt_check_for_initrd(unsigned long node)
+{
+ unsigned long l;
+ u32 *prop;
+
+ pr_debug("Looking for initrd properties... ");
+
+ prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
+ if (prop) {
+ initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4));
+
+ prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
+ if (prop) {
+ initrd_end = (unsigned long)
+ __va(of_read_ulong(prop, l/4));
+ initrd_below_start_ok = 1;
+ } else {
+ initrd_start = 0;
+ }
+ }
+
+ pr_debug("initrd_start=0x%lx initrd_end=0x%lx\n",
+ initrd_start, initrd_end);
+}
+#else
+static inline void early_init_dt_check_for_initrd(unsigned long node)
+{
+}
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+static int __init early_init_dt_scan_chosen(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ unsigned long l;
+ char *p;
+
+ pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
+
+ if (depth != 1 ||
+ (strcmp(uname, "chosen") != 0 &&
+ strcmp(uname, "chosen@0") != 0))
+ return 0;
+
+#ifdef CONFIG_KEXEC
+ lprop = (u64 *)of_get_flat_dt_prop(node,
+ "linux,crashkernel-base", NULL);
+ if (lprop)
+ crashk_res.start = *lprop;
+
+ lprop = (u64 *)of_get_flat_dt_prop(node,
+ "linux,crashkernel-size", NULL);
+ if (lprop)
+ crashk_res.end = crashk_res.start + *lprop - 1;
+#endif
+
+ early_init_dt_check_for_initrd(node);
+
+ /* Retreive command line */
+ p = of_get_flat_dt_prop(node, "bootargs", &l);
+ if (p != NULL && l > 0)
+ strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
+
+#ifdef CONFIG_CMDLINE
+ if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
+ strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+#endif /* CONFIG_CMDLINE */
+
+ pr_debug("Command line is: %s\n", cmd_line);
+
+ /* break now */
+ return 1;
+}
+
+static int __init early_init_dt_scan_root(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ u32 *prop;
+
+ if (depth != 0)
+ return 0;
+
+ prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
+ dt_root_size_cells = (prop == NULL) ? 1 : *prop;
+ pr_debug("dt_root_size_cells = %x\n", dt_root_size_cells);
+
+ prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
+ dt_root_addr_cells = (prop == NULL) ? 2 : *prop;
+ pr_debug("dt_root_addr_cells = %x\n", dt_root_addr_cells);
+
+ /* break now */
+ return 1;
+}
+
+static u64 __init dt_mem_next_cell(int s, cell_t **cellp)
+{
+ cell_t *p = *cellp;
+
+ *cellp = p + s;
+ return of_read_number(p, s);
+}
+
+static int __init early_init_dt_scan_memory(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+ cell_t *reg, *endp;
+ unsigned long l;
+
+ /* Look for the ibm,dynamic-reconfiguration-memory node */
+/* if (depth == 1 &&
+ strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0)
+ return early_init_dt_scan_drconf_memory(node);
+*/
+ /* We are scanning "memory" nodes only */
+ if (type == NULL) {
+ /*
+ * The longtrail doesn't have a device_type on the
+ * /memory node, so look for the node called /memory@0.
+ */
+ if (depth != 1 || strcmp(uname, "memory@0") != 0)
+ return 0;
+ } else if (strcmp(type, "memory") != 0)
+ return 0;
+
+ reg = (cell_t *)of_get_flat_dt_prop(node, "linux,usable-memory", &l);
+ if (reg == NULL)
+ reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l);
+ if (reg == NULL)
+ return 0;
+
+ endp = reg + (l / sizeof(cell_t));
+
+ pr_debug("memory scan node %s, reg size %ld, data: %x %x %x %x,\n",
+ uname, l, reg[0], reg[1], reg[2], reg[3]);
+
+ while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
+ u64 base, size;
+
+ base = dt_mem_next_cell(dt_root_addr_cells, &reg);
+ size = dt_mem_next_cell(dt_root_size_cells, &reg);
+
+ if (size == 0)
+ continue;
+ pr_debug(" - %llx , %llx\n", (unsigned long long)base,
+ (unsigned long long)size);
+
+ lmb_add(base, size);
+ }
+ return 0;
+}
+
+#ifdef CONFIG_PHYP_DUMP
+/**
+ * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg
+ *
+ * Function to find the largest size we need to reserve
+ * during early boot process.
+ *
+ * It either looks for boot param and returns that OR
+ * returns larger of 256 or 5% rounded down to multiples of 256MB.
+ *
+ */
+static inline unsigned long phyp_dump_calculate_reserve_size(void)
+{
+ unsigned long tmp;
+
+ if (phyp_dump_info->reserve_bootvar)
+ return phyp_dump_info->reserve_bootvar;
+
+ /* divide by 20 to get 5% of value */
+ tmp = lmb_end_of_DRAM();
+ do_div(tmp, 20);
+
+ /* round it down in multiples of 256 */
+ tmp = tmp & ~0x0FFFFFFFUL;
+
+ return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END);
+}
+
+/**
+ * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
+ *
+ * This routine may reserve memory regions in the kernel only
+ * if the system is supported and a dump was taken in last
+ * boot instance or if the hardware is supported and the
+ * scratch area needs to be setup. In other instances it returns
+ * without reserving anything. The memory in case of dump being
+ * active is freed when the dump is collected (by userland tools).
+ */
+static void __init phyp_dump_reserve_mem(void)
+{
+ unsigned long base, size;
+ unsigned long variable_reserve_size;
+
+ if (!phyp_dump_info->phyp_dump_configured) {
+ printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
+ return;
+ }
+
+ if (!phyp_dump_info->phyp_dump_at_boot) {
+ printk(KERN_INFO "Phyp-dump disabled at boot time\n");
+ return;
+ }
+
+ variable_reserve_size = phyp_dump_calculate_reserve_size();
+
+ if (phyp_dump_info->phyp_dump_is_active) {
+ /* Reserve *everything* above RMR.Area freed by userland tools*/
+ base = variable_reserve_size;
+ size = lmb_end_of_DRAM() - base;
+
+ /* XXX crashed_ram_end is wrong, since it may be beyond
+ * the memory_limit, it will need to be adjusted. */
+ lmb_reserve(base, size);
+
+ phyp_dump_info->init_reserve_start = base;
+ phyp_dump_info->init_reserve_size = size;
+ } else {
+ size = phyp_dump_info->cpu_state_size +
+ phyp_dump_info->hpte_region_size +
+ variable_reserve_size;
+ base = lmb_end_of_DRAM() - size;
+ lmb_reserve(base, size);
+ phyp_dump_info->init_reserve_start = base;
+ phyp_dump_info->init_reserve_size = size;
+ }
+}
+#else
+static inline void __init phyp_dump_reserve_mem(void) {}
+#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */
+
+#ifdef CONFIG_EARLY_PRINTK
+/* MS this is Microblaze specifig function */
+static int __init early_init_dt_scan_serial(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ unsigned long l;
+ char *p;
+ int *addr;
+
+ pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
+
+/* find all serial nodes */
+ if (strncmp(uname, "serial", 6) != 0)
+ return 0;
+
+ early_init_dt_check_for_initrd(node);
+
+/* find compatible node with uartlite */
+ p = of_get_flat_dt_prop(node, "compatible", &l);
+ if ((strncmp(p, "xlnx,xps-uartlite", 17) != 0) &&
+ (strncmp(p, "xlnx,opb-uartlite", 17) != 0))
+ return 0;
+
+ addr = of_get_flat_dt_prop(node, "reg", &l);
+ return *addr; /* return address */
+}
+
+/* this function is looking for early uartlite console - Microblaze specific */
+int __init early_uartlite_console(void)
+{
+ return of_scan_flat_dt(early_init_dt_scan_serial, NULL);
+}
+#endif
+
+void __init early_init_devtree(void *params)
+{
+ pr_debug(" -> early_init_devtree(%p)\n", params);
+
+ /* Setup flat device-tree pointer */
+ initial_boot_params = params;
+
+#ifdef CONFIG_PHYP_DUMP
+ /* scan tree to see if dump occured during last boot */
+ of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
+#endif
+
+ /* Retrieve various informations from the /chosen node of the
+ * device-tree, including the platform type, initrd location and
+ * size, TCE reserve, and more ...
+ */
+ of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
+
+ /* Scan memory nodes and rebuild LMBs */
+ lmb_init();
+ of_scan_flat_dt(early_init_dt_scan_root, NULL);
+ of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+
+ /* Save command line for /proc/cmdline and then parse parameters */
+ strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
+ parse_early_param();
+
+ lmb_analyze();
+
+ pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size());
+
+ pr_debug("Scanning CPUs ...\n");
+
+ /* Retreive CPU related informations from the flat tree
+ * (altivec support, boot CPU ID, ...)
+ */
+ of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
+
+ pr_debug(" <- early_init_devtree()\n");
+}
+
+/**
+ * Indicates whether the root node has a given value in its
+ * compatible property.
+ */
+int machine_is_compatible(const char *compat)
+{
+ struct device_node *root;
+ int rc = 0;
+
+ root = of_find_node_by_path("/");
+ if (root) {
+ rc = of_device_is_compatible(root, compat);
+ of_node_put(root);
+ }
+ return rc;
+}
+EXPORT_SYMBOL(machine_is_compatible);
+
+/*******
+ *
+ * New implementation of the OF "find" APIs, return a refcounted
+ * object, call of_node_put() when done. The device tree and list
+ * are protected by a rw_lock.
+ *
+ * Note that property management will need some locking as well,
+ * this isn't dealt with yet.
+ *
+ *******/
+
+/**
+ * of_find_node_by_phandle - Find a node given a phandle
+ * @handle: phandle of the node to find
+ *
+ * Returns a node pointer with refcount incremented, use
+ * of_node_put() on it when done.
+ */
+struct device_node *of_find_node_by_phandle(phandle handle)
+{
+ struct device_node *np;
+
+ read_lock(&devtree_lock);
+ for (np = allnodes; np != NULL; np = np->allnext)
+ if (np->linux_phandle == handle)
+ break;
+ of_node_get(np);
+ read_unlock(&devtree_lock);
+ return np;
+}
+EXPORT_SYMBOL(of_find_node_by_phandle);
+
+/**
+ * of_find_all_nodes - Get next node in global list
+ * @prev: Previous node or NULL to start iteration
+ * of_node_put() will be called on it
+ *
+ * Returns a node pointer with refcount incremented, use
+ * of_node_put() on it when done.
+ */
+struct device_node *of_find_all_nodes(struct device_node *prev)
+{
+ struct device_node *np;
+
+ read_lock(&devtree_lock);
+ np = prev ? prev->allnext : allnodes;
+ for (; np != NULL; np = np->allnext)
+ if (of_node_get(np))
+ break;
+ of_node_put(prev);
+ read_unlock(&devtree_lock);
+ return np;
+}
+EXPORT_SYMBOL(of_find_all_nodes);
+
+/**
+ * of_node_get - Increment refcount of a node
+ * @node: Node to inc refcount, NULL is supported to
+ * simplify writing of callers
+ *
+ * Returns node.
+ */
+struct device_node *of_node_get(struct device_node *node)
+{
+ if (node)
+ kref_get(&node->kref);
+ return node;
+}
+EXPORT_SYMBOL(of_node_get);
+
+static inline struct device_node *kref_to_device_node(struct kref *kref)
+{
+ return container_of(kref, struct device_node, kref);
+}
+
+/**
+ * of_node_release - release a dynamically allocated node
+ * @kref: kref element of the node to be released
+ *
+ * In of_node_put() this function is passed to kref_put()
+ * as the destructor.
+ */
+static void of_node_release(struct kref *kref)
+{
+ struct device_node *node = kref_to_device_node(kref);
+ struct property *prop = node->properties;
+
+ /* We should never be releasing nodes that haven't been detached. */
+ if (!of_node_check_flag(node, OF_DETACHED)) {
+ printk(KERN_INFO "WARNING: Bad of_node_put() on %s\n",
+ node->full_name);
+ dump_stack();
+ kref_init(&node->kref);
+ return;
+ }
+
+ if (!of_node_check_flag(node, OF_DYNAMIC))
+ return;
+
+ while (prop) {
+ struct property *next = prop->next;
+ kfree(prop->name);
+ kfree(prop->value);
+ kfree(prop);
+ prop = next;
+
+ if (!prop) {
+ prop = node->deadprops;
+ node->deadprops = NULL;
+ }
+ }
+ kfree(node->full_name);
+ kfree(node->data);
+ kfree(node);
+}
+
+/**
+ * of_node_put - Decrement refcount of a node
+ * @node: Node to dec refcount, NULL is supported to
+ * simplify writing of callers
+ *
+ */
+void of_node_put(struct device_node *node)
+{
+ if (node)
+ kref_put(&node->kref, of_node_release);
+}
+EXPORT_SYMBOL(of_node_put);
+
+/*
+ * Plug a device node into the tree and global list.
+ */
+void of_attach_node(struct device_node *np)
+{
+ unsigned long flags;
+
+ write_lock_irqsave(&devtree_lock, flags);
+ np->sibling = np->parent->child;
+ np->allnext = allnodes;
+ np->parent->child = np;
+ allnodes = np;
+ write_unlock_irqrestore(&devtree_lock, flags);
+}
+
+/*
+ * "Unplug" a node from the device tree. The caller must hold
+ * a reference to the node. The memory associated with the node
+ * is not freed until its refcount goes to zero.
+ */
+void of_detach_node(struct device_node *np)
+{
+ struct device_node *parent;
+ unsigned long flags;
+
+ write_lock_irqsave(&devtree_lock, flags);
+
+ parent = np->parent;
+ if (!parent)
+ goto out_unlock;
+
+ if (allnodes == np)
+ allnodes = np->allnext;
+ else {
+ struct device_node *prev;
+ for (prev = allnodes;
+ prev->allnext != np;
+ prev = prev->allnext)
+ ;
+ prev->allnext = np->allnext;
+ }
+
+ if (parent->child == np)
+ parent->child = np->sibling;
+ else {
+ struct device_node *prevsib;
+ for (prevsib = np->parent->child;
+ prevsib->sibling != np;
+ prevsib = prevsib->sibling)
+ ;
+ prevsib->sibling = np->sibling;
+ }
+
+ of_node_set_flag(np, OF_DETACHED);
+
+out_unlock:
+ write_unlock_irqrestore(&devtree_lock, flags);
+}
+
+/*
+ * Add a property to a node
+ */
+int prom_add_property(struct device_node *np, struct property *prop)
+{
+ struct property **next;
+ unsigned long flags;
+
+ prop->next = NULL;
+ write_lock_irqsave(&devtree_lock, flags);
+ next = &np->properties;
+ while (*next) {
+ if (strcmp(prop->name, (*next)->name) == 0) {
+ /* duplicate ! don't insert it */
+ write_unlock_irqrestore(&devtree_lock, flags);
+ return -1;
+ }
+ next = &(*next)->next;
+ }
+ *next = prop;
+ write_unlock_irqrestore(&devtree_lock, flags);
+
+#ifdef CONFIG_PROC_DEVICETREE
+ /* try to add to proc as well if it was initialized */
+ if (np->pde)
+ proc_device_tree_add_prop(np->pde, prop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+ return 0;
+}
+
+/*
+ * Remove a property from a node. Note that we don't actually
+ * remove it, since we have given out who-knows-how-many pointers
+ * to the data using get-property. Instead we just move the property
+ * to the "dead properties" list, so it won't be found any more.
+ */
+int prom_remove_property(struct device_node *np, struct property *prop)
+{
+ struct property **next;
+ unsigned long flags;
+ int found = 0;
+
+ write_lock_irqsave(&devtree_lock, flags);
+ next = &np->properties;
+ while (*next) {
+ if (*next == prop) {
+ /* found the node */
+ *next = prop->next;
+ prop->next = np->deadprops;
+ np->deadprops = prop;
+ found = 1;
+ break;
+ }
+ next = &(*next)->next;
+ }
+ write_unlock_irqrestore(&devtree_lock, flags);
+
+ if (!found)
+ return -ENODEV;
+
+#ifdef CONFIG_PROC_DEVICETREE
+ /* try to remove the proc node as well */
+ if (np->pde)
+ proc_device_tree_remove_prop(np->pde, prop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+ return 0;
+}
+
+/*
+ * Update a property in a node. Note that we don't actually
+ * remove it, since we have given out who-knows-how-many pointers
+ * to the data using get-property. Instead we just move the property
+ * to the "dead properties" list, and add the new property to the
+ * property list
+ */
+int prom_update_property(struct device_node *np,
+ struct property *newprop,
+ struct property *oldprop)
+{
+ struct property **next;
+ unsigned long flags;
+ int found = 0;
+
+ write_lock_irqsave(&devtree_lock, flags);
+ next = &np->properties;
+ while (*next) {
+ if (*next == oldprop) {
+ /* found the node */
+ newprop->next = oldprop->next;
+ *next = newprop;
+ oldprop->next = np->deadprops;
+ np->deadprops = oldprop;
+ found = 1;
+ break;
+ }
+ next = &(*next)->next;
+ }
+ write_unlock_irqrestore(&devtree_lock, flags);
+
+ if (!found)
+ return -ENODEV;
+
+#ifdef CONFIG_PROC_DEVICETREE
+ /* try to add to proc as well if it was initialized */
+ if (np->pde)
+ proc_device_tree_update_prop(np->pde, newprop, oldprop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+ return 0;
+}
+
+#if defined(CONFIG_DEBUG_FS) && defined(DEBUG)
+static struct debugfs_blob_wrapper flat_dt_blob;
+
+static int __init export_flat_device_tree(void)
+{
+ struct dentry *d;
+
+ flat_dt_blob.data = initial_boot_params;
+ flat_dt_blob.size = initial_boot_params->totalsize;
+
+ d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR,
+ of_debugfs_root, &flat_dt_blob);
+ if (!d)
+ return 1;
+
+ return 0;
+}
+device_initcall(export_flat_device_tree);
+#endif
diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
new file mode 100644
index 0000000..ae0352e
--- /dev/null
+++ b/arch/microblaze/kernel/prom_parse.c
@@ -0,0 +1,1025 @@
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/pci_regs.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/etherdevice.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+
+#define PRu64 "%llx"
+
+/* Max address size we deal with */
+#define OF_MAX_ADDR_CELLS 4
+#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \
+ (ns) > 0)
+
+static struct of_bus *of_match_bus(struct device_node *np);
+static int __of_address_to_resource(struct device_node *dev,
+ const u32 *addrp, u64 size, unsigned int flags,
+ struct resource *r);
+
+/* Debug utility */
+#ifdef DEBUG
+static void of_dump_addr(const char *s, const u32 *addr, int na)
+{
+ printk(KERN_INFO "%s", s);
+ while (na--)
+ printk(KERN_INFO " %08x", *(addr++));
+ printk(KERN_INFO "\n");
+}
+#else
+static void of_dump_addr(const char *s, const u32 *addr, int na) { }
+#endif
+
+/* Callbacks for bus specific translators */
+struct of_bus {
+ const char *name;
+ const char *addresses;
+ int (*match)(struct device_node *parent);
+ void (*count_cells)(struct device_node *child,
+ int *addrc, int *sizec);
+ u64 (*map)(u32 *addr, const u32 *range,
+ int na, int ns, int pna);
+ int (*translate)(u32 *addr, u64 offset, int na);
+ unsigned int (*get_flags)(const u32 *addr);
+};
+
+/*
+ * Default translator (generic bus)
+ */
+
+static void of_bus_default_count_cells(struct device_node *dev,
+ int *addrc, int *sizec)
+{
+ if (addrc)
+ *addrc = of_n_addr_cells(dev);
+ if (sizec)
+ *sizec = of_n_size_cells(dev);
+}
+
+static u64 of_bus_default_map(u32 *addr, const u32 *range,
+ int na, int ns, int pna)
+{
+ u64 cp, s, da;
+
+ cp = of_read_number(range, na);
+ s = of_read_number(range + na + pna, ns);
+ da = of_read_number(addr, na);
+
+ pr_debug("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n",
+ cp, s, da);
+
+ if (da < cp || da >= (cp + s))
+ return OF_BAD_ADDR;
+ return da - cp;
+}
+
+static int of_bus_default_translate(u32 *addr, u64 offset, int na)
+{
+ u64 a = of_read_number(addr, na);
+ memset(addr, 0, na * 4);
+ a += offset;
+ if (na > 1)
+ addr[na - 2] = a >> 32;
+ addr[na - 1] = a & 0xffffffffu;
+
+ return 0;
+}
+
+static unsigned int of_bus_default_get_flags(const u32 *addr)
+{
+ return IORESOURCE_MEM;
+}
+
+#ifdef CONFIG_PCI
+/*
+ * PCI bus specific translator
+ */
+
+static int of_bus_pci_match(struct device_node *np)
+{
+ /* "vci" is for the /chaos bridge on 1st-gen PCI powermacs */
+ return !strcmp(np->type, "pci") || !strcmp(np->type, "vci");
+}
+
+static void of_bus_pci_count_cells(struct device_node *np,
+ int *addrc, int *sizec)
+{
+ if (addrc)
+ *addrc = 3;
+ if (sizec)
+ *sizec = 2;
+}
+
+static u64 of_bus_pci_map(u32 *addr, const u32 *range, int na, int ns, int pna)
+{
+ u64 cp, s, da;
+
+ /* Check address type match */
+ if ((addr[0] ^ range[0]) & 0x03000000)
+ return OF_BAD_ADDR;
+
+ /* Read address values, skipping high cell */
+ cp = of_read_number(range + 1, na - 1);
+ s = of_read_number(range + na + pna, ns);
+ da = of_read_number(addr + 1, na - 1);
+
+ pr_debug("OF: PCI map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
+
+ if (da < cp || da >= (cp + s))
+ return OF_BAD_ADDR;
+ return da - cp;
+}
+
+static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
+{
+ return of_bus_default_translate(addr + 1, offset, na - 1);
+}
+
+static unsigned int of_bus_pci_get_flags(const u32 *addr)
+{
+ unsigned int flags = 0;
+ u32 w = addr[0];
+
+ switch ((w >> 24) & 0x03) {
+ case 0x01:
+ flags |= IORESOURCE_IO;
+ break;
+ case 0x02: /* 32 bits */
+ case 0x03: /* 64 bits */
+ flags |= IORESOURCE_MEM;
+ break;
+ }
+ if (w & 0x40000000)
+ flags |= IORESOURCE_PREFETCH;
+ return flags;
+}
+
+const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
+ unsigned int *flags)
+{
+ const u32 *prop;
+ unsigned int psize;
+ struct device_node *parent;
+ struct of_bus *bus;
+ int onesize, i, na, ns;
+
+ /* Get parent & match bus type */
+ parent = of_get_parent(dev);
+ if (parent == NULL)
+ return NULL;
+ bus = of_match_bus(parent);
+ if (strcmp(bus->name, "pci")) {
+ of_node_put(parent);
+ return NULL;
+ }
+ bus->count_cells(dev, &na, &ns);
+ of_node_put(parent);
+ if (!OF_CHECK_COUNTS(na, ns))
+ return NULL;
+
+ /* Get "reg" or "assigned-addresses" property */
+ prop = of_get_property(dev, bus->addresses, &psize);
+ if (prop == NULL)
+ return NULL;
+ psize /= 4;
+
+ onesize = na + ns;
+ for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
+ if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) {
+ if (size)
+ *size = of_read_number(prop + na, ns);
+ if (flags)
+ *flags = bus->get_flags(prop);
+ return prop;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(of_get_pci_address);
+
+int of_pci_address_to_resource(struct device_node *dev, int bar,
+ struct resource *r)
+{
+ const u32 *addrp;
+ u64 size;
+ unsigned int flags;
+
+ addrp = of_get_pci_address(dev, bar, &size, &flags);
+ if (addrp == NULL)
+ return -EINVAL;
+ return __of_address_to_resource(dev, addrp, size, flags, r);
+}
+EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
+
+static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
+{
+ return (((pin - 1) + slot) % 4) + 1;
+}
+
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+{
+ struct device_node *dn, *ppnode;
+ struct pci_dev *ppdev;
+ u32 lspec;
+ u32 laddr[3];
+ u8 pin;
+ int rc;
+
+ /* Check if we have a device node, if yes, fallback to standard OF
+ * parsing
+ */
+ dn = pci_device_to_OF_node(pdev);
+ if (dn)
+ return of_irq_map_one(dn, 0, out_irq);
+
+ /* Ok, we don't, time to have fun. Let's start by building up an
+ * interrupt spec. we assume #interrupt-cells is 1, which is standard
+ * for PCI. If you do different, then don't use that routine.
+ */
+ rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
+ if (rc != 0)
+ return rc;
+ /* No pin, exit */
+ if (pin == 0)
+ return -ENODEV;
+
+ /* Now we walk up the PCI tree */
+ lspec = pin;
+ for (;;) {
+ /* Get the pci_dev of our parent */
+ ppdev = pdev->bus->self;
+
+ /* Ouch, it's a host bridge... */
+ if (ppdev == NULL) {
+ struct pci_controller *host;
+ host = pci_bus_to_host(pdev->bus);
+ ppnode = host ? host->arch_data : NULL;
+ /* No node for host bridge ? give up */
+ if (ppnode == NULL)
+ return -EINVAL;
+ } else
+ /* We found a P2P bridge, check if it has a node */
+ ppnode = pci_device_to_OF_node(ppdev);
+
+ /* Ok, we have found a parent with a device-node, hand over to
+ * the OF parsing code.
+ * We build a unit address from the linux device to be used for
+ * resolution. Note that we use the linux bus number which may
+ * not match your firmware bus numbering.
+ * Fortunately, in most cases, interrupt-map-mask doesn't
+ * include the bus number as part of the matching.
+ * You should still be careful about that though if you intend
+ * to rely on this function (you ship a firmware that doesn't
+ * create device nodes for all PCI devices).
+ */
+ if (ppnode)
+ break;
+
+ /* We can only get here if we hit a P2P bridge with no node,
+ * let's do standard swizzling and try again
+ */
+ lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec);
+ pdev = ppdev;
+ }
+
+ laddr[0] = (pdev->bus->number << 16)
+ | (pdev->devfn << 8);
+ laddr[1] = laddr[2] = 0;
+ return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
+}
+EXPORT_SYMBOL_GPL(of_irq_map_pci);
+#endif /* CONFIG_PCI */
+
+/*
+ * ISA bus specific translator
+ */
+
+static int of_bus_isa_match(struct device_node *np)
+{
+ return !strcmp(np->name, "isa");
+}
+
+static void of_bus_isa_count_cells(struct device_node *child,
+ int *addrc, int *sizec)
+{
+ if (addrc)
+ *addrc = 2;
+ if (sizec)
+ *sizec = 1;
+}
+
+static u64 of_bus_isa_map(u32 *addr, const u32 *range, int na, int ns, int pna)
+{
+ u64 cp, s, da;
+
+ /* Check address type match */
+ if ((addr[0] ^ range[0]) & 0x00000001)
+ return OF_BAD_ADDR;
+
+ /* Read address values, skipping high cell */
+ cp = of_read_number(range + 1, na - 1);
+ s = of_read_number(range + na + pna, ns);
+ da = of_read_number(addr + 1, na - 1);
+
+ pr_debug("OF: ISA map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
+
+ if (da < cp || da >= (cp + s))
+ return OF_BAD_ADDR;
+ return da - cp;
+}
+
+static int of_bus_isa_translate(u32 *addr, u64 offset, int na)
+{
+ return of_bus_default_translate(addr + 1, offset, na - 1);
+}
+
+static unsigned int of_bus_isa_get_flags(const u32 *addr)
+{
+ unsigned int flags = 0;
+ u32 w = addr[0];
+
+ if (w & 1)
+ flags |= IORESOURCE_IO;
+ else
+ flags |= IORESOURCE_MEM;
+ return flags;
+}
+
+/*
+ * Array of bus specific translators
+ */
+
+static struct of_bus of_busses[] = {
+#ifdef CONFIG_PCI
+ /* PCI */
+ {
+ .name = "pci",
+ .addresses = "assigned-addresses",
+ .match = of_bus_pci_match,
+ .count_cells = of_bus_pci_count_cells,
+ .map = of_bus_pci_map,
+ .translate = of_bus_pci_translate,
+ .get_flags = of_bus_pci_get_flags,
+ },
+#endif /* CONFIG_PCI */
+ /* ISA */
+ {
+ .name = "isa",
+ .addresses = "reg",
+ .match = of_bus_isa_match,
+ .count_cells = of_bus_isa_count_cells,
+ .map = of_bus_isa_map,
+ .translate = of_bus_isa_translate,
+ .get_flags = of_bus_isa_get_flags,
+ },
+ /* Default */
+ {
+ .name = "default",
+ .addresses = "reg",
+ .match = NULL,
+ .count_cells = of_bus_default_count_cells,
+ .map = of_bus_default_map,
+ .translate = of_bus_default_translate,
+ .get_flags = of_bus_default_get_flags,
+ },
+};
+
+static struct of_bus *of_match_bus(struct device_node *np)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(of_busses); i++)
+ if (!of_busses[i].match || of_busses[i].match(np))
+ return &of_busses[i];
+ BUG();
+ return NULL;
+}
+
+static int of_translate_one(struct device_node *parent, struct of_bus *bus,
+ struct of_bus *pbus, u32 *addr,
+ int na, int ns, int pna)
+{
+ const u32 *ranges;
+ unsigned int rlen;
+ int rone;
+ u64 offset = OF_BAD_ADDR;
+
+ /* Normally, an absence of a "ranges" property means we are
+ * crossing a non-translatable boundary, and thus the addresses
+ * below the current not cannot be converted to CPU physical ones.
+ * Unfortunately, while this is very clear in the spec, it's not
+ * what Apple understood, and they do have things like /uni-n or
+ * /ht nodes with no "ranges" property and a lot of perfectly
+ * useable mapped devices below them. Thus we treat the absence of
+ * "ranges" as equivalent to an empty "ranges" property which means
+ * a 1:1 translation at that level. It's up to the caller not to try
+ * to translate addresses that aren't supposed to be translated in
+ * the first place. --BenH.
+ */
+ ranges = of_get_property(parent, "ranges", (int *) &rlen);
+ if (ranges == NULL || rlen == 0) {
+ offset = of_read_number(addr, na);
+ memset(addr, 0, pna * 4);
+ pr_debug("OF: no ranges, 1:1 translation\n");
+ goto finish;
+ }
+
+ pr_debug("OF: walking ranges...\n");
+
+ /* Now walk through the ranges */
+ rlen /= 4;
+ rone = na + pna + ns;
+ for (; rlen >= rone; rlen -= rone, ranges += rone) {
+ offset = bus->map(addr, ranges, na, ns, pna);
+ if (offset != OF_BAD_ADDR)
+ break;
+ }
+ if (offset == OF_BAD_ADDR) {
+ pr_debug("OF: not found !\n");
+ return 1;
+ }
+ memcpy(addr, ranges + na, 4 * pna);
+
+ finish:
+ of_dump_addr("OF: parent translation for:", addr, pna);
+ pr_debug("OF: with offset: "PRu64"\n", offset);
+
+ /* Translate it into parent bus space */
+ return pbus->translate(addr, offset, pna);
+}
+
+/*
+ * Translate an address from the device-tree into a CPU physical address,
+ * this walks up the tree and applies the various bus mappings on the
+ * way.
+ *
+ * Note: We consider that crossing any level with #size-cells == 0 to mean
+ * that translation is impossible (that is we are not dealing with a value
+ * that can be mapped to a cpu physical address). This is not really specified
+ * that way, but this is traditionally the way IBM at least do things
+ */
+u64 of_translate_address(struct device_node *dev, const u32 *in_addr)
+{
+ struct device_node *parent = NULL;
+ struct of_bus *bus, *pbus;
+ u32 addr[OF_MAX_ADDR_CELLS];
+ int na, ns, pna, pns;
+ u64 result = OF_BAD_ADDR;
+
+ pr_debug("OF: ** translation for device %s **\n", dev->full_name);
+
+ /* Increase refcount at current level */
+ of_node_get(dev);
+
+ /* Get parent & match bus type */
+ parent = of_get_parent(dev);
+ if (parent == NULL)
+ goto bail;
+ bus = of_match_bus(parent);
+
+ /* Cound address cells & copy address locally */
+ bus->count_cells(dev, &na, &ns);
+ if (!OF_CHECK_COUNTS(na, ns)) {
+ printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
+ dev->full_name);
+ goto bail;
+ }
+ memcpy(addr, in_addr, na * 4);
+
+ pr_debug("OF: bus is %s (na=%d, ns=%d) on %s\n",
+ bus->name, na, ns, parent->full_name);
+ of_dump_addr("OF: translating address:", addr, na);
+
+ /* Translate */
+ for (;;) {
+ /* Switch to parent bus */
+ of_node_put(dev);
+ dev = parent;
+ parent = of_get_parent(dev);
+
+ /* If root, we have finished */
+ if (parent == NULL) {
+ pr_debug("OF: reached root node\n");
+ result = of_read_number(addr, na);
+ break;
+ }
+
+ /* Get new parent bus and counts */
+ pbus = of_match_bus(parent);
+ pbus->count_cells(dev, &pna, &pns);
+ if (!OF_CHECK_COUNTS(pna, pns)) {
+ printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
+ dev->full_name);
+ break;
+ }
+
+ pr_debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n",
+ pbus->name, pna, pns, parent->full_name);
+
+ /* Apply bus translation */
+ if (of_translate_one(dev, bus, pbus, addr, na, ns, pna))
+ break;
+
+ /* Complete the move up one level */
+ na = pna;
+ ns = pns;
+ bus = pbus;
+
+ of_dump_addr("OF: one level translation:", addr, na);
+ }
+ bail:
+ of_node_put(parent);
+ of_node_put(dev);
+
+ return result;
+}
+EXPORT_SYMBOL(of_translate_address);
+
+const u32 *of_get_address(struct device_node *dev, int index, u64 *size,
+ unsigned int *flags)
+{
+ const u32 *prop;
+ unsigned int psize;
+ struct device_node *parent;
+ struct of_bus *bus;
+ int onesize, i, na, ns;
+
+ /* Get parent & match bus type */
+ parent = of_get_parent(dev);
+ if (parent == NULL)
+ return NULL;
+ bus = of_match_bus(parent);
+ bus->count_cells(dev, &na, &ns);
+ of_node_put(parent);
+ if (!OF_CHECK_COUNTS(na, ns))
+ return NULL;
+
+ /* Get "reg" or "assigned-addresses" property */
+ prop = of_get_property(dev, bus->addresses, (int *) &psize);
+ if (prop == NULL)
+ return NULL;
+ psize /= 4;
+
+ onesize = na + ns;
+ for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
+ if (i == index) {
+ if (size)
+ *size = of_read_number(prop + na, ns);
+ if (flags)
+ *flags = bus->get_flags(prop);
+ return prop;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(of_get_address);
+
+static int __of_address_to_resource(struct device_node *dev, const u32 *addrp,
+ u64 size, unsigned int flags,
+ struct resource *r)
+{
+ u64 taddr;
+
+ if ((flags & (IORESOURCE_IO | IORESOURCE_MEM)) == 0)
+ return -EINVAL;
+ taddr = of_translate_address(dev, addrp);
+ if (taddr == OF_BAD_ADDR)
+ return -EINVAL;
+ memset(r, 0, sizeof(struct resource));
+ if (flags & IORESOURCE_IO) {
+ unsigned long port;
+ port = -1; /* pci_address_to_pio(taddr); */
+ if (port == (unsigned long)-1)
+ return -EINVAL;
+ r->start = port;
+ r->end = port + size - 1;
+ } else {
+ r->start = taddr;
+ r->end = taddr + size - 1;
+ }
+ r->flags = flags;
+ r->name = dev->name;
+ return 0;
+}
+
+int of_address_to_resource(struct device_node *dev, int index,
+ struct resource *r)
+{
+ const u32 *addrp;
+ u64 size;
+ unsigned int flags;
+
+ addrp = of_get_address(dev, index, &size, &flags);
+ if (addrp == NULL)
+ return -EINVAL;
+ return __of_address_to_resource(dev, addrp, size, flags, r);
+}
+EXPORT_SYMBOL_GPL(of_address_to_resource);
+
+void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
+ unsigned long *busno, unsigned long *phys, unsigned long *size)
+{
+ const u32 *dma_window;
+ u32 cells;
+ const unsigned char *prop;
+
+ dma_window = dma_window_prop;
+
+ /* busno is always one cell */
+ *busno = *(dma_window++);
+
+ prop = of_get_property(dn, "ibm,#dma-address-cells", NULL);
+ if (!prop)
+ prop = of_get_property(dn, "#address-cells", NULL);
+
+ cells = prop ? *(u32 *)prop : of_n_addr_cells(dn);
+ *phys = of_read_number(dma_window, cells);
+
+ dma_window += cells;
+
+ prop = of_get_property(dn, "ibm,#dma-size-cells", NULL);
+ cells = prop ? *(u32 *)prop : of_n_size_cells(dn);
+ *size = of_read_number(dma_window, cells);
+}
+
+/*
+ * Interrupt remapper
+ */
+
+static unsigned int of_irq_workarounds;
+static struct device_node *of_irq_dflt_pic;
+
+static struct device_node *of_irq_find_parent(struct device_node *child)
+{
+ struct device_node *p;
+ const phandle *parp;
+
+ if (!of_node_get(child))
+ return NULL;
+
+ do {
+ parp = of_get_property(child, "interrupt-parent", NULL);
+ if (parp == NULL)
+ p = of_get_parent(child);
+ else {
+ if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
+ p = of_node_get(of_irq_dflt_pic);
+ else
+ p = of_find_node_by_phandle(*parp);
+ }
+ of_node_put(child);
+ child = p;
+ } while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL);
+
+ return p;
+}
+
+/* This doesn't need to be called if you don't have any special workaround
+ * flags to pass
+ */
+void of_irq_map_init(unsigned int flags)
+{
+ of_irq_workarounds = flags;
+
+ /* OldWorld, don't bother looking at other things */
+ if (flags & OF_IMAP_OLDWORLD_MAC)
+ return;
+
+ /* If we don't have phandles, let's try to locate a default interrupt
+ * controller (happens when booting with BootX). We do a first match
+ * here, hopefully, that only ever happens on machines with one
+ * controller.
+ */
+ if (flags & OF_IMAP_NO_PHANDLE) {
+ struct device_node *np;
+
+ for (np = NULL; (np = of_find_all_nodes(np)) != NULL;) {
+ if (of_get_property(np, "interrupt-controller", NULL)
+ == NULL)
+ continue;
+ /* Skip /chosen/interrupt-controller */
+ if (strcmp(np->name, "chosen") == 0)
+ continue;
+ /* It seems like at least one person on this planet
+ * wants to use BootX on a machine with an AppleKiwi
+ * controller which happens to pretend to be an
+ * interrupt controller too.
+ */
+ if (strcmp(np->name, "AppleKiwi") == 0)
+ continue;
+ /* I think we found one ! */
+ of_irq_dflt_pic = np;
+ break;
+ }
+ }
+
+}
+
+int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
+ const u32 *addr, struct of_irq *out_irq)
+{
+ struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
+ const u32 *tmp, *imap, *imask;
+ u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
+ int imaplen, match, i;
+
+ pr_debug("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],"
+ "ointsize=%d\n",
+ parent->full_name, intspec[0], intspec[1], ointsize);
+
+ ipar = of_node_get(parent);
+
+ /* First get the #interrupt-cells property of the current cursor
+ * that tells us how to interpret the passed-in intspec. If there
+ * is none, we are nice and just walk up the tree
+ */
+ do {
+ tmp = of_get_property(ipar, "#interrupt-cells", NULL);
+ if (tmp != NULL) {
+ intsize = *tmp;
+ break;
+ }
+ tnode = ipar;
+ ipar = of_irq_find_parent(ipar);
+ of_node_put(tnode);
+ } while (ipar);
+ if (ipar == NULL) {
+ pr_debug(" -> no parent found !\n");
+ goto fail;
+ }
+
+ pr_debug("of_irq_map_raw: ipar=%s, size=%d\n",
+ ipar->full_name, intsize);
+
+ if (ointsize != intsize)
+ return -EINVAL;
+
+ /* Look for this #address-cells. We have to implement the old linux
+ * trick of looking for the parent here as some device-trees rely on it
+ */
+ old = of_node_get(ipar);
+ do {
+ tmp = of_get_property(old, "#address-cells", NULL);
+ tnode = of_get_parent(old);
+ of_node_put(old);
+ old = tnode;
+ } while (old && tmp == NULL);
+ of_node_put(old);
+ old = NULL;
+ addrsize = (tmp == NULL) ? 2 : *tmp;
+
+ pr_debug(" -> addrsize=%d\n", addrsize);
+
+ /* Now start the actual "proper" walk of the interrupt tree */
+ while (ipar != NULL) {
+ /* Now check if cursor is an interrupt-controller and if it is
+ * then we are done
+ */
+ if (of_get_property(ipar, "interrupt-controller", NULL) !=
+ NULL) {
+ pr_debug(" -> got it !\n");
+ memcpy(out_irq->specifier, intspec,
+ intsize * sizeof(u32));
+ out_irq->size = intsize;
+ out_irq->controller = ipar;
+ of_node_put(old);
+ return 0;
+ }
+
+ /* Now look for an interrupt-map */
+ imap = of_get_property(ipar, "interrupt-map", &imaplen);
+ /* No interrupt map, check for an interrupt parent */
+ if (imap == NULL) {
+ pr_debug(" -> no map, getting parent\n");
+ newpar = of_irq_find_parent(ipar);
+ goto skiplevel;
+ }
+ imaplen /= sizeof(u32);
+
+ /* Look for a mask */
+ imask = of_get_property(ipar, "interrupt-map-mask", NULL);
+
+ /* If we were passed no "reg" property and we attempt to parse
+ * an interrupt-map, then #address-cells must be 0.
+ * Fail if it's not.
+ */
+ if (addr == NULL && addrsize != 0) {
+ pr_debug(" -> no reg passed in when needed !\n");
+ goto fail;
+ }
+
+ /* Parse interrupt-map */
+ match = 0;
+ while (imaplen > (addrsize + intsize + 1) && !match) {
+ /* Compare specifiers */
+ match = 1;
+ for (i = 0; i < addrsize && match; ++i) {
+ u32 mask = imask ? imask[i] : 0xffffffffu;
+ match = ((addr[i] ^ imap[i]) & mask) == 0;
+ }
+ for (; i < (addrsize + intsize) && match; ++i) {
+ u32 mask = imask ? imask[i] : 0xffffffffu;
+ match =
+ ((intspec[i-addrsize] ^ imap[i])
+ & mask) == 0;
+ }
+ imap += addrsize + intsize;
+ imaplen -= addrsize + intsize;
+
+ pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen);
+
+ /* Get the interrupt parent */
+ if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
+ newpar = of_node_get(of_irq_dflt_pic);
+ else
+ newpar =
+ of_find_node_by_phandle((phandle)*imap);
+ imap++;
+ --imaplen;
+
+ /* Check if not found */
+ if (newpar == NULL) {
+ pr_debug(" -> imap parent not found !\n");
+ goto fail;
+ }
+
+ /* Get #interrupt-cells and #address-cells of new
+ * parent
+ */
+ tmp = of_get_property(newpar, "#interrupt-cells", NULL);
+ if (tmp == NULL) {
+ pr_debug(" -> parent lacks "
+ "#interrupt-cells!\n");
+ goto fail;
+ }
+ newintsize = *tmp;
+ tmp = of_get_property(newpar, "#address-cells", NULL);
+ newaddrsize = (tmp == NULL) ? 0 : *tmp;
+
+ pr_debug(" -> newintsize=%d, newaddrsize=%d\n",
+ newintsize, newaddrsize);
+
+ /* Check for malformed properties */
+ if (imaplen < (newaddrsize + newintsize))
+ goto fail;
+
+ imap += newaddrsize + newintsize;
+ imaplen -= newaddrsize + newintsize;
+
+ pr_debug(" -> imaplen=%d\n", imaplen);
+ }
+ if (!match)
+ goto fail;
+
+ of_node_put(old);
+ old = of_node_get(newpar);
+ addrsize = newaddrsize;
+ intsize = newintsize;
+ intspec = imap - intsize;
+ addr = intspec - addrsize;
+
+skiplevel:
+ /* Iterate again with new parent */
+ pr_debug(" -> new parent: %s\n",
+ newpar ? newpar->full_name : "<>");
+ of_node_put(ipar);
+ ipar = newpar;
+ newpar = NULL;
+ }
+fail:
+ of_node_put(ipar);
+ of_node_put(old);
+ of_node_put(newpar);
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(of_irq_map_raw);
+
+int of_irq_map_one(struct device_node *device,
+ int index, struct of_irq *out_irq)
+{
+ struct device_node *p;
+ const u32 *intspec, *tmp, *addr;
+ u32 intsize, intlen;
+ int res;
+
+ pr_debug("of_irq_map_one: dev=%s, index=%d\n",
+ device->full_name, index);
+
+ /* Get the interrupts property */
+ intspec = of_get_property(device, "interrupts", (int *) &intlen);
+ if (intspec == NULL)
+ return -EINVAL;
+ intlen /= sizeof(u32);
+
+ pr_debug(" intspec=%d intlen=%d\n", *intspec, intlen);
+
+ /* Get the reg property (if any) */
+ addr = of_get_property(device, "reg", NULL);
+
+ /* Look for the interrupt parent. */
+ p = of_irq_find_parent(device);
+ if (p == NULL)
+ return -EINVAL;
+
+ /* Get size of interrupt specifier */
+ tmp = of_get_property(p, "#interrupt-cells", NULL);
+ if (tmp == NULL) {
+ of_node_put(p);
+ return -EINVAL;
+ }
+ intsize = *tmp;
+
+ pr_debug(" intsize=%d intlen=%d\n", intsize, intlen);
+
+ /* Check index */
+ if ((index + 1) * intsize > intlen)
+ return -EINVAL;
+
+ /* Get new specifier and map it */
+ res = of_irq_map_raw(p, intspec + index * intsize, intsize,
+ addr, out_irq);
+ of_node_put(p);
+ return res;
+}
+EXPORT_SYMBOL_GPL(of_irq_map_one);
+
+/**
+ * Search the device tree for the best MAC address to use. 'mac-address' is
+ * checked first, because that is supposed to contain to "most recent" MAC
+ * address. If that isn't set, then 'local-mac-address' is checked next,
+ * because that is the default address. If that isn't set, then the obsolete
+ * 'address' is checked, just in case we're using an old device tree.
+ *
+ * Note that the 'address' property is supposed to contain a virtual address of
+ * the register set, but some DTS files have redefined that property to be the
+ * MAC address.
+ *
+ * All-zero MAC addresses are rejected, because those could be properties that
+ * exist in the device tree, but were not set by U-Boot. For example, the
+ * DTS could define 'mac-address' and 'local-mac-address', with zero MAC
+ * addresses. Some older U-Boots only initialized 'local-mac-address'. In
+ * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
+ * but is all zeros.
+*/
+const void *of_get_mac_address(struct device_node *np)
+{
+ struct property *pp;
+
+ pp = of_find_property(np, "mac-address", NULL);
+ if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+ return pp->value;
+
+ pp = of_find_property(np, "local-mac-address", NULL);
+ if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+ return pp->value;
+
+ pp = of_find_property(np, "address", NULL);
+ if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+ return pp->value;
+
+ return NULL;
+}
+EXPORT_SYMBOL(of_get_mac_address);
+
+int of_irq_to_resource(struct device_node *dev, int index, struct resource *r)
+{
+ struct of_irq out_irq;
+ int irq;
+ int res;
+
+ res = of_irq_map_one(dev, index, &out_irq);
+
+ /* Get irq for the device */
+ if (res) {
+ pr_debug("IRQ not found... code = %d", res);
+ return NO_IRQ;
+ }
+ /* Assuming single interrupt controller... */
+ irq = out_irq.specifier[0];
+
+ pr_debug("IRQ found = %d", irq);
+
+ /* Only dereference the resource if both the
+ * resource and the irq are valid. */
+ if (r && irq != NO_IRQ) {
+ r->start = r->end = irq;
+ r->flags = IORESOURCE_IRQ;
+ }
+
+ return irq;
+}
+EXPORT_SYMBOL_GPL(of_irq_to_resource);
+
+void __iomem *of_iomap(struct device_node *np, int index)
+{
+ struct resource res;
+
+ if (of_address_to_resource(np, index, &res))
+ return NULL;
+
+ return ioremap(res.start, 1 + res.end - res.start);
+}
+EXPORT_SYMBOL(of_iomap);
--
1.5.5.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/