[patch 10/13] cleanup ifdef CONFIG_INTR_REMAP in io_apic code

From: Suresh Siddha
Date: Mon Mar 16 2009 - 20:29:43 EST


Signed-off-by: Suresh Siddha <suresh.b.siddha@xxxxxxxxx>
---
Index: tip/arch/x86/kernel/apic/io_apic.c
===================================================================
--- tip.orig/arch/x86/kernel/apic/io_apic.c
+++ tip/arch/x86/kernel/apic/io_apic.c
@@ -554,16 +554,12 @@ static void __target_IO_APIC_irq(unsigne

apic = entry->apic;
pin = entry->pin;
-#ifdef CONFIG_INTR_REMAP
/*
* With interrupt-remapping, destination information comes
* from interrupt-remapping table entry.
*/
if (!irq_remapped(irq))
io_apic_write(apic, 0x11 + pin*2, dest);
-#else
- io_apic_write(apic, 0x11 + pin*2, dest);
-#endif
reg = io_apic_read(apic, 0x10 + pin*2);
reg &= ~IO_APIC_REDIR_VECTOR_MASK;
reg |= vector;
@@ -1419,9 +1415,8 @@ void __setup_vector_irq(int cpu)
}

static struct irq_chip ioapic_chip;
-#ifdef CONFIG_INTR_REMAP
static struct irq_chip ir_ioapic_chip;
-#endif
+static struct irq_chip msi_ir_chip;

#define IOAPIC_AUTO -1
#define IOAPIC_EDGE 0
@@ -1460,7 +1455,6 @@ static void ioapic_register_intr(int irq
else
desc->status &= ~IRQ_LEVEL;

-#ifdef CONFIG_INTR_REMAP
if (irq_remapped(irq)) {
desc->status |= IRQ_MOVE_PCNTXT;
if (trigger)
@@ -1472,7 +1466,7 @@ static void ioapic_register_intr(int irq
handle_edge_irq, "edge");
return;
}
-#endif
+
if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
trigger == IOAPIC_LEVEL)
set_irq_chip_and_handler_name(irq, &ioapic_chip,
@@ -1493,7 +1487,6 @@ int setup_ioapic_entry(int apic_id, int
*/
memset(entry,0,sizeof(*entry));

-#ifdef CONFIG_INTR_REMAP
if (intr_remapping_enabled) {
struct intel_iommu *iommu = map_ioapic_to_ir(apic_id);
struct irte irte;
@@ -1535,9 +1528,7 @@ int setup_ioapic_entry(int apic_id, int
* irq handler will do the explicit EOI to the io-apic.
*/
ir_entry->vector = pin;
- } else
-#endif
- {
+ } else {
entry->delivery_mode = apic->irq_delivery_mode;
entry->dest_mode = apic->irq_dest_mode;
entry->dest = destination;
@@ -1662,10 +1653,8 @@ static void __init setup_timer_IRQ0_pin(
{
struct IO_APIC_route_entry entry;

-#ifdef CONFIG_INTR_REMAP
if (intr_remapping_enabled)
return;
-#endif

memset(&entry, 0, sizeof(entry));

@@ -2395,6 +2384,11 @@ static void set_ir_ioapic_affinity_irq(u

set_ir_ioapic_affinity_irq_desc(desc, mask);
}
+#else
+static inline void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
+ const struct cpumask *mask)
+{
+}
#endif

asmlinkage void smp_irq_move_cleanup_interrupt(void)
@@ -2883,10 +2877,8 @@ static inline void __init check_timer(vo
* 8259A.
*/
if (pin1 == -1) {
-#ifdef CONFIG_INTR_REMAP
if (intr_remapping_enabled)
panic("BIOS bug: timer not connected to IO-APIC");
-#endif
pin1 = pin2;
apic1 = apic2;
no_pin1 = 1;
@@ -2922,10 +2914,8 @@ static inline void __init check_timer(vo
clear_IO_APIC_pin(0, pin1);
goto out;
}
-#ifdef CONFIG_INTR_REMAP
if (intr_remapping_enabled)
panic("timer doesn't work through Interrupt-remapped IO-APIC");
-#endif
local_irq_disable();
clear_IO_APIC_pin(apic1, pin1);
if (!no_pin1)
@@ -3219,9 +3209,7 @@ void destroy_irq(unsigned int irq)
if (desc)
desc->chip_data = cfg;

-#ifdef CONFIG_INTR_REMAP
free_irte(irq);
-#endif
spin_lock_irqsave(&vector_lock, flags);
__clear_irq_vector(irq, cfg);
spin_unlock_irqrestore(&vector_lock, flags);
@@ -3247,7 +3235,6 @@ static int msi_compose_msg(struct pci_de

dest = apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());

-#ifdef CONFIG_INTR_REMAP
if (irq_remapped(irq)) {
struct irte irte;
int ir_index;
@@ -3273,9 +3260,7 @@ static int msi_compose_msg(struct pci_de
MSI_ADDR_IR_SHV |
MSI_ADDR_IR_INDEX1(ir_index) |
MSI_ADDR_IR_INDEX2(ir_index);
- } else
-#endif
- {
+ } else {
if (x2apic_enabled())
msg->address_hi = MSI_ADDR_BASE_HI |
MSI_ADDR_EXT_DEST_ID(dest);
@@ -3392,6 +3377,7 @@ static struct irq_chip msi_ir_chip = {
#endif
.retrigger = ioapic_retrigger_irq,
};
+#endif

/*
* Map the PCI dev to the corresponding remapping hardware unit
@@ -3419,7 +3405,6 @@ static int msi_alloc_irte(struct pci_dev
}
return index;
}
-#endif

static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq)
{
@@ -3433,7 +3418,6 @@ static int setup_msi_irq(struct pci_dev
set_irq_msi(irq, msidesc);
write_msi_msg(irq, &msg);

-#ifdef CONFIG_INTR_REMAP
if (irq_remapped(irq)) {
struct irq_desc *desc = irq_to_desc(irq);
/*
@@ -3442,7 +3426,6 @@ static int setup_msi_irq(struct pci_dev
desc->status |= IRQ_MOVE_PCNTXT;
set_irq_chip_and_handler_name(irq, &msi_ir_chip, handle_edge_irq, "edge");
} else
-#endif
set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");

dev_printk(KERN_DEBUG, &dev->dev, "irq %d for MSI/MSI-X\n", irq);
@@ -3456,11 +3439,8 @@ int arch_setup_msi_irqs(struct pci_dev *
int ret, sub_handle;
struct msi_desc *msidesc;
unsigned int irq_want;
-
-#ifdef CONFIG_INTR_REMAP
struct intel_iommu *iommu = 0;
int index = 0;
-#endif

irq_want = nr_irqs_gsi;
sub_handle = 0;
@@ -3469,7 +3449,6 @@ int arch_setup_msi_irqs(struct pci_dev *
if (irq == 0)
return -1;
irq_want = irq + 1;
-#ifdef CONFIG_INTR_REMAP
if (!intr_remapping_enabled)
goto no_ir;

@@ -3497,7 +3476,6 @@ int arch_setup_msi_irqs(struct pci_dev *
set_irte_irq(irq, iommu, index, sub_handle);
}
no_ir:
-#endif
ret = setup_msi_irq(dev, msidesc, irq);
if (ret < 0)
goto error;
@@ -4032,11 +4010,9 @@ void __init setup_ioapic_dest(void)
else
mask = apic->target_cpus();

-#ifdef CONFIG_INTR_REMAP
if (intr_remapping_enabled)
set_ir_ioapic_affinity_irq_desc(desc, mask);
else
-#endif
set_ioapic_affinity_irq_desc(desc, mask);
}

Index: tip/include/linux/dmar.h
===================================================================
--- tip.orig/include/linux/dmar.h
+++ tip/include/linux/dmar.h
@@ -26,9 +26,8 @@
#include <linux/msi.h>
#include <linux/irqreturn.h>

-#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP)
struct intel_iommu;
-
+#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP)
struct dmar_drhd_unit {
struct list_head list; /* list of drhd units */
struct acpi_dmar_header *hdr; /* ACPI header */
@@ -52,7 +51,6 @@ extern int dmar_dev_scope_init(void);
extern void detect_intel_iommu(void);
extern int enable_drhd_fault_handling(void);

-
extern int parse_ioapics_under_ir(void);
extern int alloc_iommu(struct dmar_drhd_unit *);
#else
@@ -65,12 +63,12 @@ static inline int dmar_table_init(void)
{
return -ENODEV;
}
+static inline int enable_drhd_fault_handling(void)
+{
+ return -1;
+}
#endif /* !CONFIG_DMAR && !CONFIG_INTR_REMAP */

-#ifdef CONFIG_INTR_REMAP
-extern int intr_remapping_enabled;
-extern int enable_intr_remapping(int);
-
struct irte {
union {
struct {
@@ -99,6 +97,10 @@ struct irte {
__u64 high;
};
};
+#ifdef CONFIG_INTR_REMAP
+extern int intr_remapping_enabled;
+extern int enable_intr_remapping(int);
+
extern int get_irte(int irq, struct irte *entry);
extern int modify_irte(int irq, struct irte *irte_modified);
extern int alloc_irte(struct intel_iommu *iommu, int irq, u16 count);
@@ -113,6 +115,35 @@ extern int irq_remapped(int irq);
extern struct intel_iommu *map_dev_to_ir(struct pci_dev *dev);
extern struct intel_iommu *map_ioapic_to_ir(int apic);
#else
+static inline int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
+{
+ return -1;
+}
+static inline int modify_irte(int irq, struct irte *irte_modified)
+{
+ return -1;
+}
+static inline int free_irte(int irq)
+{
+ return -1;
+}
+static inline int map_irq_to_irte_handle(int irq, u16 *sub_handle)
+{
+ return -1;
+}
+static inline int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index,
+ u16 sub_handle)
+{
+ return -1;
+}
+static inline struct intel_iommu *map_dev_to_ir(struct pci_dev *dev)
+{
+ return NULL;
+}
+static inline struct intel_iommu *map_ioapic_to_ir(int apic)
+{
+ return NULL;
+}
#define irq_remapped(irq) (0)
#define enable_intr_remapping(mode) (-1)
#define intr_remapping_enabled (0)
Index: tip/arch/x86/kernel/apic/probe_64.c
===================================================================
--- tip.orig/arch/x86/kernel/apic/probe_64.c
+++ tip/arch/x86/kernel/apic/probe_64.c
@@ -69,14 +69,12 @@ void __init default_setup_apic_routing(v
printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
}

-#ifdef CONFIG_X86_X2APIC
/*
* Now that apic routing model is selected, configure the
* fault handling for intr remapping.
*/
if (intr_remapping_enabled)
enable_drhd_fault_handling();
-#endif
}

/* Same for both flat and physical. */

--

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/