Re: Linux 2.6.29-rc6

[Jesper Krogh]

john stultz wrote:
> On Thu, 2009-02-26 at 22:35 +0100, Jesper Krogh wrote:
> > john stultz wrote:
> > > On Thu, Feb 26, 2009 at 12:43 PM, Jesper Krogh <jesper@xxxxxxxx> wrote:
> > > > Linus Torvalds wrote:
> > > > > On Thu, 26 Feb 2009, Jesper Krogh wrote:
> > > > > > 2.6.26.8 doesnt have this problem.
> > > > > >
> > > > > > The "current_clocsource" is the same on both systems.
> > > > > >
> > > > > > $ cat /sys/devices/system/clocksource/clocksource0/current_clocksource
> > > > > > tsc
> > > > > What does the frequency calibrate to? It should be in the dmesg. Does it
> > > > > differ by a big amount?
> > > > Non-working:
> > > > $ dmesg | grep -i freq
> > > > [    0.004007] Calibrating delay loop (skipped), value calculated using
> > > > timer frequency.. 4620.05 BogoMIPS (lpj=9240104)
> > > >
> > > > 2.6.26.8 doesn't have that information.
> > > I'm surprised the clocksource watchdog isn't catching it.
> > >
> > > What's the output from:
> > > cat /sys/devices/system/clocksource/clocksource0/available_clocksource
> > $ cat /sys/devices/system/clocksource/clocksource0/available_clocksource
> > tsc acpi_pm jiffies
>
> Hmm. Does booting w/ "clocksourc=acpi_pm" also show the severe (~550ppm,
> which NTP can't handle) drift?
>
> > From the dmesg, I don't see any major calibration difference right off. 
>
> So I'd suspect something like TSC halting in idle could be causing
> problems, but the watchdog should catch that as well. My only guess at
> this point is that the ACPI PM is halting in idle along with the TSC. 
>
> And you said this only happens under load? 

That wasn't true.. I got some real sunday testing done today. A fresh 
2.6.28.7 has the same problem with a load of 0.00 0.00 0.00

2.6.27.19 doesn't have problems keeping time.

--
Jesper
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/