Re: dead USB devices after resume [mmotm 2009-02-10-16-35]

[Alan Stern]

On Fri, 13 Feb 2009, Jiri Slaby wrote:

> > You might want to build a kernel with CONFIG_USB_DEBUG enabled.  The 
> > extra debugging information should help find the problem.
> 
> Here comes the resume part (including unplug, replug). I suspect auto-suspend?

I don't think autosuspend is the issue, because normally neither
keyboards nor mice get autosuspended.  In fact the log appears to be
perfectly correct; I don't see any errors in it.

So the problem must be lower down, such as in the usbhid driver.  The 
best way to track this is to use usbmon.  Here's what I'd like you to 
do:

	After booting, unplug the mouse/keyboard.  Then do
	"dmesg -c >/dev/null" to clear the kernel log buffer.

	Start up usbmon, looking at bus 6 (or whichever bus the
	mouse/keyboard was plugged into).  If you don't have any
	other keyboard to use for this then do it via a network
	login.

	Plug in the mouse/keyboard.  Press a key to verify that
	the keyboard is working, but otherwise don't use either
	device.

	Go through a suspend/resume cycle (again using the network
	link if you don't have another keyboard).

	Type another key to verify that the keyboard isn't working.

	Unplug the keyboard/mouse and plug them back in.

	Type a third key to verify that now the keyboard is
	working again.

	Stop the usbmon trace and post the resulting file along
	with the dmesg log.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/