Re: how to change serial device<->port association

[Pazzo Da Legare]

Dear Oliver,

Thank you very much for your help. I'm going to try your suggestion.

p

2009/1/29 Oliver Neukum <oliver@xxxxxxxxxx>:
> Am Thursday 29 January 2009 13:43:02 schrieb Jan Engelhardt:
>> >Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing disabled
>> >serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>> >serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>> >serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a NS16550A
>> >serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a NS16550A
>> >00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>> >00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>> >00:0b: ttyS2 at I/O 0x3e8 (irq = 10) is a NS16550A
>> >00:0c: ttyS3 at I/O 0x2e8 (irq = 11) is a NS16550A
>> >
>> >I would like to change the map ttySx -> I/O port. I try with setserial
>> >but it doesn't work....Any clue?
>
> They are just names. Create device nodes with the name you like and
> the correct major:minor combination. Udev can do this for you.
>
>        Regards
>                Oliver
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/