Re: how to change serial device<->port association

[Jan Engelhardt]

On Thursday 2009-01-29 12:02, Pazzo Da Legare wrote:

>Dear ML,
>
>how can I instruct the kernel (if possible) to map a certain serial
>port to a specific device ttySx?
>I have 4 16550 ports and kernel ( the driver, I suppose) say to me:
>
>Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a NS16550A
>serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a NS16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0b: ttyS2 at I/O 0x3e8 (irq = 10) is a NS16550A
>00:0c: ttyS3 at I/O 0x2e8 (irq = 11) is a NS16550A
>
>I would like to change the map ttySx -> I/O port. I try with setserial
>but it doesn't work....Any clue?

If you want to access ttyS4, etc. you need to increase
CONFIG_SERIAL_8250_NR_UARTS. I found that using setserial(8)
to change ports for an existing ttyS[0-3] has no effects.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/