Re: a question about p4_clockmod module on Xeon quad coreprocessors

[Dave Jones]

[please don't top-post]

On Wed, Jan 28, 2009 at 06:06:37PM -0800, Xiaoning Ding wrote:
 
 > >  > I have tried the p4-clockmod module in Linux kernel
 > > 2.6.29 on Xeon 5355 quad-core CPUs with no luck. It seems
 > > current p4-clockmod driver still cannot support Intel Quad
 > > core processors, right? 
 > >  > 
 > >  > I know I can also use acpi-cpufreq. It can only scale
 > > down the frequence from 2.67GHz to 2GHz. But I need some
 > > lower frequencies for some experiments.
 > > 
 > > p4-clockmod doesn't change the processor frequency.
 > > Because of common misconceptions like this, the user
 > > interface has been removed.
 > > 
 > > In 2.6.29, the clock modulation code is called directly
 > > from ACPI
 > > whenever thermal events indicate that throttling is
 > > necessary.
 > > 
 > Thanks for the correction. 
 > My experiments need to reduce CPU speed. However, I can only reduce the speed by about 30% (from 2.67GHz to 2GHz) with ACPI. That is not enough for the experiments. 

The ACPI P-states are nearly always correct, so you won't be
able to go below 2GHz on this system.

 > p4-clockmod has not been removed from 2.6.29. It is under the same directory as acpi-cpufreq (arch/x86/kernel/cpu/cpufreq). So I thought it was an alternative approach. But I could not get it loaded.

The driver is present, the _user interface_ has been removed.

	Dave

-- 
http://www.codemonkey.org.uk
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/