[PATCH E 07/14] OMAP2/3 clock: use standard set_rate fn inomap2_clk_arch_init()

[Paul Walmsley]

Use the standard clk_set_rate() function in omap2_clk_arch_init()
rather than omap2_select_table_rate() -- this will ensure that clock
rates are recalculated and propagated correctly after those operations
are consolidated into clk_set_rate().

linux-omap source commit is 03c03330017eeb445b01957608ff5db49a7151b6.

Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
 arch/arm/mach-omap2/clock24xx.c |    2 +-
 arch/arm/mach-omap2/clock34xx.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 640a2cb..3727a73 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -502,7 +502,7 @@ static int __init omap2_clk_arch_init(void)
 	if (!mpurate)
 		return -EINVAL;
 
-	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+	if (clk_set_rate(&virt_prcm_set, mpurate))
 		printk(KERN_ERR "Could not find matching MPU rate\n");
 
 	recalculate_root_clocks();
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 2c655be..738a029 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -665,7 +665,7 @@ static int __init omap2_clk_arch_init(void)
 
 	/* REVISIT: not yet ready for 343x */
 #if 0
-	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+	if (clk_set_rate(&virt_prcm_set, mpurate))
 		printk(KERN_ERR "Could not find matching MPU rate\n");
 #endif
 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/