[bug] CONFIG_I2C_VIAPRO=y breaks skge
From: Ingo Molnar
Date: Tue Jan 27 2009 - 10:14:22 EST
hi,
A -tip testsystem triggered this stuck eth0/skge bug today:
[ 24.787761] skge eth0: enabling interface
[ 24.793177] skge eth0: phy write timeout
[ 24.797035] skge eth0: phy write timeout
[ 24.801019] skge eth0: phy write timeout
[ 24.808325] skge eth0: phy write timeout
[ 24.813019] skge eth0: phy write timeout
[ 24.817019] skge eth0: phy write timeout
[ 24.821131] skge eth0: phy write timeout
[ 24.828610] skge eth0: phy write timeout
[ 24.832834] ADDRCONF(NETDEV_UP): eth0: link is not ready
[root@centauri ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:6E:B3:3D:C6
inet addr:10.0.1.22 Bcast:10.0.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12884901885 errors:0 dropped:0 overruns:0 frame:0
TX packets:12884901885 errors:0 dropped:0 overruns:0 carrier:4294967295
collisions:4294967295 txqueuelen:1000
RX bytes:18446744073709551615 (1.5 EiB) TX bytes:18446744073709551615 (1.5 EiB)
Interrupt:17
(see the weird stats as well)
after a lengthy .config-bisection session i tracked it down to:
CONFIG_I2C_VIAPRO=y
if that is disabled, the skge driver works fine and the stats look
healthy:
eth0 Link encap:Ethernet HWaddr 00:0C:6E:B3:3D:C6
inet addr:10.0.1.22 Bcast:10.0.1.255 Mask:255.255.255.0
inet6 addr: fe80::20c:6eff:feb3:3dc6/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:837 errors:0 dropped:0 overruns:0 frame:0
TX packets:767 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:128098 (125.0 KiB) TX bytes:130996 (127.9 KiB)
Interrupt:17
Find below the lspci output - it's a pretty old system. I have not tested
this system for a long time so the bug might have been there forever.
Ingo
-------------------->
00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
00:0a.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12)
00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/