Re: [PATCH] mmc: Add driver for Freescale eSDHC controllers

[Kumar Gala]

On Jan 14, 2009, at 1:46 PM, Anton Vorontsov wrote:

> From: Xie Xiaobo <X.Xie@xxxxxxxxxxxxx>
>
> This patch adds support for the Freescale Enhanced Secure Digital
> Host Controller Interface as found in some Freescale PowerPC
> microprocessors (e.g. MPC837x SOCs).
>
> Signed-off-by: Xie Xiaobo <X.Xie@xxxxxxxxxxxxx>
> Signed-off-by: Konjin Lai <Konjin.Lai@xxxxxxxxxxxxx>
> Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@xxxxxxxxxxxxx>
> Signed-off-by: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
> ---
> drivers/mmc/host/Kconfig  |    9 +
> drivers/mmc/host/Makefile |    1 +
> drivers/mmc/host/esdhc.c  | 1321 ++++++++++++++++++++++++++++++++++++ 
> +++++++++
> drivers/mmc/host/esdhc.h  |  255 +++++++++
> 4 files changed, 1586 insertions(+), 0 deletions(-)
> create mode 100644 drivers/mmc/host/esdhc.c
> create mode 100644 drivers/mmc/host/esdhc.h

Want to work some device tree docs for this.

- k
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/