Re: USB memory card reader and 64MB SD card - 2.6.28-git14

[Robert Hancock]

rhubbell wrote:
> Darn, I meant to respond to the list also.
> Anyway there is no dmesg output for the card. 
> The dmesg output looks correct with the 128MB card.
>
> Here's for the 128:
> scsi0 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 2
> usb-storage: waiting for device to settle before scanning
> scsi 0:0:0:0: Direct-Access              USB Card Reader  1.01 PQ: 0 ANSI: 0 CCS
> sd 0:0:0:0: [sda] 251904 512-byte hardware sectors: (128 MB/123 MiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
> sd 0:0:0:0: [sda] Assuming drive cache: write through
> sd 0:0:0:0: [sda] 251904 512-byte hardware sectors: (128 MB/123 MiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
> sd 0:0:0:0: [sda] Assuming drive cache: write through
>  sda: sda1
> sd 0:0:0:0: [sda] Attached SCSI removable disk
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> usb-storage: device scan complete

That output seems rather normal.. If you're not getting anything like 
that with the other card though, I would tend to suspect some kind of 
issue with the card, the reader or some kind of incompatibility between 
them. Certainly all the USB resets from the other output would tend to 
suggest the reader isn't responding properly with that card installed..
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/