Re: 2.6.27.9 - Resuming from hibernate locks after "CPU1 is down"

[Rafael J. Wysocki]

Hi,

On Thursday 25 December 2008, Paul Rolland wrote:
> Self replying, just to add that 2.6.28 has the same behavior.
> 
> Regards,
> Paul
> 
> On Thu, 25 Dec 2008 23:09:34 +0100
> Paul Rolland <rol@xxxxxxxxxx> wrote:
> 
> > Hello,
> > 
> > I'm trying to have suspend to disk and suspend to RAM work on my machine
> > (Dell Inspiron 6400, 2Go RAM, with an Intel Mobile 945GM/GMS, 943/940GM
> > L Express Integrated Graphics Controller.
> > 
> > To suspend, I'm using the "echo mem | disk > /sys/power/state" command.
> > 
> > As of now, using suspend to RAM allow the machine to suspend, and resume
> > is nearly OK except the video is not restored, and the screen stays black
> > (but keyboard is Ok, I can launch any command I want, so I can restart).
> > 
> > When suspending to disk, suspend is Ok with :
> > echo -n 2097152000 > /sys/power/image_size ;
> > echo -n disk > /sys/power/state
> > and resuming detects the image in the swap partition. So, I have on the
> > console, when I add "no_console_suspend" on the boot command line :
> > PM: loading image data pages...
> > PM: read xxxxx kbytes in y.zz seconds
> > ...
> > [stuff about scsi/sda]
> > Disabling non-boot CPUs
> > CPU1 is now offlone
> > SMP alternatives: switching to UP code
> > CPU1 is down
> > 
> > and then, nothing :( machine is dead frozen. CAPS Lock doesn't toggle the
> > keyboard LED anymore, I need to manually power off and power on the
> > machine.
> > 
> > I must add that these are my first attempts. So, this is not to be
> > considered a regression.
> > 
> > Is there anything else I can do to try to debug the resume ?

As Pavel alread said, please boot the kernel with init=/bin/bash , mount /sys,
mount /proc, run 'swapon -a' and try to hibernate-resume.

Thanks,
Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/