[PATCH 3/3] w35und: kill WBDEBUG and remove common.h header file

From: Pekka J Enberg
Date: Thu Jan 08 2009 - 04:32:39 EST

From: Pekka Enberg <penberg@xxxxxxxxxxxxxx>

The only remaining thing in common.h header file is the WBDEBUG() macro which
is unconditionally defined as printk(). Kill the macro and remove the header
file.

Cc: Pavel Machek <pavel@xxxxxxx>
Signed-off-by: Pekka Enberg <penberg@xxxxxxxxxxxxxx>
---
drivers/staging/winbond/common.h | 23 -----------------------
drivers/staging/winbond/mds.c | 8 ++++----
drivers/staging/winbond/mto.c | 1 -
drivers/staging/winbond/reg.c | 18 +++++++++---------
drivers/staging/winbond/wb35reg.c | 10 +++++-----
drivers/staging/winbond/wb35rx.c | 10 +++++-----
drivers/staging/winbond/wb35tx.c | 10 +++++-----
drivers/staging/winbond/wbhal.c | 2 +-
drivers/staging/winbond/wbhal_s.h | 2 --
drivers/staging/winbond/wbusb.c | 4 ++--
10 files changed, 31 insertions(+), 57 deletions(-)
delete mode 100644 drivers/staging/winbond/common.h

diff --git a/drivers/staging/winbond/common.h b/drivers/staging/winbond/common.h
deleted file mode 100644
index 4409edd..0000000
--- a/drivers/staging/winbond/common.h
+++ /dev/null
@@ -1,23 +0,0 @@
-//
-// common.h
-//
-// This file contains the OS dependant definition and function.
-// Every OS has this file individual.
-//
-#ifndef COMMON_DEF
-#define COMMON_DEF
-
-//#define DEBUG_ENABLED 1
-
-//==================================================================================================
-// Common function definition
-//==================================================================================================
-#define DEBUG_ENABLED
-#ifdef DEBUG_ENABLED
-#define WBDEBUG( _M ) printk _M
-#else
-#define WBDEBUG( _M ) 0
-#endif
-
-#endif // COMMON_DEF
-
diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c
index a9d1945..9a14836 100644
--- a/drivers/staging/winbond/mds.c
+++ b/drivers/staging/winbond/mds.c
@@ -374,7 +374,7 @@ static void Mds_HeaderCopy(struct wbsoft_priv * adapter, PDESCRIPTOR pDes, u8 *T

pDes->TxRate = ctmp1;
#ifdef _PE_TX_DUMP_
- WBDEBUG(("Tx rate =%x\n", ctmp1));
+ printk("Tx rate =%x\n", ctmp1);
#endif

pT01->T01_modulation_type = (ctmp1%3) ? 0 : 1;
@@ -442,7 +442,7 @@ Mds_Tx(struct wbsoft_priv * adapter)
FillIndex = pMds->TxFillIndex;
if (pMds->TxOwner[FillIndex]) { // Is owned by software 0:Yes 1:No
#ifdef _PE_TX_DUMP_
- WBDEBUG(("[Mds_Tx] Tx Owner is H/W.\n"));
+ printk("[Mds_Tx] Tx Owner is H/W.\n");
#endif
break;
}
@@ -488,7 +488,7 @@ Mds_Tx(struct wbsoft_priv * adapter)
// For speed up Key setting
if (pTxDes->EapFix) {
#ifdef _PE_TX_DUMP_
- WBDEBUG(("35: EPA 4th frame detected. Size = %d\n", PacketSize));
+ printk("35: EPA 4th frame detected. Size = %d\n", PacketSize);
#endif
pHwData->IsKeyPreSet = 1;
}
@@ -585,7 +585,7 @@ Mds_SendComplete(struct wbsoft_priv * adapter, PT02_DESCRIPTOR pT02)
else
pHwData->tx_retry_count[7] += RetryCount;
#ifdef _PE_STATE_DUMP_
- WBDEBUG(("dto_tx_retry_count =%d\n", pHwData->dto_tx_retry_count));
+ printk("dto_tx_retry_count =%d\n", pHwData->dto_tx_retry_count);
#endif
MTO_SetTxCount(adapter, TxRate, RetryCount);
}
diff --git a/drivers/staging/winbond/mto.c b/drivers/staging/winbond/mto.c
index 7718423..8c4107b 100644
--- a/drivers/staging/winbond/mto.c
+++ b/drivers/staging/winbond/mto.c
@@ -83,7 +83,6 @@ void hal_get_dto_para(MTO_FUNC_INPUT, char *buffer);
void MTO_Init(MTO_FUNC_INPUT)
{
int i;
- //WBDEBUG(("[MTO] -> MTO_Init()\n"));
//[WKCHEN]pMTOcore_data = pcore_data;
// 20040510 Turbo add for global variable
MTO_TMR_CNT() = 0;
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index c365c5d..55b05d5 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -1115,7 +1115,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
//Start to fill RF parameters, PLL_ON should be pulled low.
Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000000 );
#ifdef _PE_STATE_DUMP_
- WBDEBUG(("* PLL_ON low\n"));
+ printk("* PLL_ON low\n");
#endif

number = sizeof(al7230_rf_data_24)/sizeof(al7230_rf_data_24[0]);
@@ -1224,7 +1224,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
//pulled high
Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
#ifdef _PE_STATE_DUMP_
- WBDEBUG(("* PLL_ON high\n"));
+ printk("* PLL_ON high\n");
#endif

//2.4GHz
@@ -1244,7 +1244,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
//5GHz
Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000000 );
#ifdef _PE_STATE_DUMP_
- WBDEBUG(("* PLL_ON low\n"));
+ printk("* PLL_ON low\n");
#endif

number = sizeof(al7230_rf_data_50)/sizeof(al7230_rf_data_50[0]);
@@ -1256,7 +1256,7 @@ RFSynthesizer_initial(phw_data_t pHwData)

Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
#ifdef _PE_STATE_DUMP_
- WBDEBUG(("* PLL_ON high\n"));
+ printk("* PLL_ON high\n");
#endif

//ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x12BACF;
@@ -1272,7 +1272,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
msleep(5);

//Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
- //WBDEBUG(("* PLL_ON high\n"));
+ //printk("* PLL_ON high\n");
break;

case RF_WB_242:
@@ -2012,7 +2012,7 @@ RFSynthesizer_SwitchingChannel( phw_data_t pHwData, ChanInfo Channel )

//Start to fill RF parameters, PLL_ON should be pulled low.
//Wb35Reg_Write( pHwData, 0x03dc, 0x00000000 );
- //WBDEBUG(("* PLL_ON low\n"));
+ //printk("* PLL_ON low\n");

//Channel independent registers
if( Channel.band != pHwData->band)
@@ -2037,7 +2037,7 @@ RFSynthesizer_SwitchingChannel( phw_data_t pHwData, ChanInfo Channel )
// Write to register. number must less and equal than 16
Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, number, NO_INCREMENT );
#ifdef _PE_STATE_DUMP_
- WBDEBUG(("Band changed\n"));
+ printk("Band changed\n");
#endif
}

@@ -2612,9 +2612,9 @@ void EEPROMTxVgaAdjust( phw_data_t pHwData ) // 20060619.5 Add
}

#ifdef _PE_STATE_DUMP_
- WBDEBUG((" TxVgaFor24 : \n"));
+ printk(" TxVgaFor24 : \n");
DataDmp((u8 *)pHwData->TxVgaFor24, 14 ,0);
- WBDEBUG((" TxVgaFor50 : \n"));
+ printk(" TxVgaFor50 : \n");
DataDmp((u8 *)pHwData->TxVgaFor50, 70 ,0);
#endif
}
diff --git a/drivers/staging/winbond/wb35reg.c b/drivers/staging/winbond/wb35reg.c
index 9d0a3aa..6a355f0 100644
--- a/drivers/staging/winbond/wb35reg.c
+++ b/drivers/staging/winbond/wb35reg.c
@@ -149,7 +149,7 @@ Wb35Reg_WriteSync( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue )

if (ret < 0) {
#ifdef _PE_REG_DUMP_
- WBDEBUG(("EP0 Write register usb message sending error\n"));
+ printk("EP0 Write register usb message sending error\n");
#endif

pHwData->SurpriseRemove = 1; // 20060704.2
@@ -316,7 +316,7 @@ Wb35Reg_ReadSync( phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue )

if (ret < 0) {
#ifdef _PE_REG_DUMP_
- WBDEBUG(("EP0 Read register usb message sending error\n"));
+ printk("EP0 Read register usb message sending error\n");
#endif

pHwData->SurpriseRemove = 1; // 20060704.2
@@ -441,7 +441,7 @@ Wb35Reg_EP0VM(phw_data_t pHwData )

if (ret < 0) {
#ifdef _PE_REG_DUMP_
- WBDEBUG(("EP0 Irp sending error\n"));
+ printk("EP0 Irp sending error\n");
#endif
goto cleanup;
}
@@ -480,7 +480,7 @@ Wb35Reg_EP0VM_complete(struct urb *urb)

if (reg->EP0VM_status) {
#ifdef _PE_REG_DUMP_
- WBDEBUG(("EP0 IoCompleteRoutine return error\n"));
+ printk("EP0 IoCompleteRoutine return error\n");
#endif
reg->EP0vm_state = VM_STOP;
pHwData->SurpriseRemove = 1;
@@ -529,7 +529,7 @@ Wb35Reg_destroy(phw_data_t pHwData)
kfree(reg_queue);
} else {
#ifdef _PE_REG_DUMP_
- WBDEBUG(("EP0 queue release error\n"));
+ printk("EP0 queue release error\n");
#endif
}
spin_lock_irq( &reg->EP0VM_spin_lock );
diff --git a/drivers/staging/winbond/wb35rx.c b/drivers/staging/winbond/wb35rx.c
index 63d5591..029d918 100644
--- a/drivers/staging/winbond/wb35rx.c
+++ b/drivers/staging/winbond/wb35rx.c
@@ -118,7 +118,7 @@ static u16 Wb35Rx_indicate(struct ieee80211_hw *hw)
// Basic check for Rx length. Is length valid?
if (PacketSize > MAX_PACKET_SIZE) {
#ifdef _PE_RX_DUMP_
- WBDEBUG(("Serious ERROR : Rx data size too long, size =%d\n", PacketSize));
+ printk("Serious ERROR : Rx data size too long, size =%d\n", PacketSize);
#endif

pWb35Rx->EP3vm_state = VM_STOP;
@@ -194,7 +194,7 @@ static void Wb35Rx_Complete(struct urb *urb)
// The URB is completed, check the result
if (pWb35Rx->EP3VM_status != 0) {
#ifdef _PE_USB_STATE_DUMP_
- WBDEBUG(("EP3 IoCompleteRoutine return error\n"));
+ printk("EP3 IoCompleteRoutine return error\n");
#endif
pWb35Rx->EP3vm_state = VM_STOP;
goto error;
@@ -259,7 +259,7 @@ static void Wb35Rx(struct ieee80211_hw *hw)
if (!pWb35Rx->RxOwner[RxBufferId]) {
// It's impossible to run here.
#ifdef _PE_RX_DUMP_
- WBDEBUG(("Rx driver fifo unavailable\n"));
+ printk("Rx driver fifo unavailable\n");
#endif
goto error;
}
@@ -348,7 +348,7 @@ void Wb35Rx_stop(phw_data_t pHwData)
if (pWb35Rx->EP3vm_state == VM_RUNNING) {
usb_unlink_urb( pWb35Rx->RxUrb ); // Only use unlink, let Wb35Rx_destroy to free them
#ifdef _PE_RX_DUMP_
- WBDEBUG(("EP3 Rx stop\n"));
+ printk("EP3 Rx stop\n");
#endif
}
}
@@ -366,7 +366,7 @@ void Wb35Rx_destroy(phw_data_t pHwData)
if (pWb35Rx->RxUrb)
usb_free_urb( pWb35Rx->RxUrb );
#ifdef _PE_RX_DUMP_
- WBDEBUG(("Wb35Rx_destroy OK\n"));
+ printk("Wb35Rx_destroy OK\n");
#endif
}

diff --git a/drivers/staging/winbond/wb35tx.c b/drivers/staging/winbond/wb35tx.c
index b9b4456..f7fe8d6 100644
--- a/drivers/staging/winbond/wb35tx.c
+++ b/drivers/staging/winbond/wb35tx.c
@@ -153,14 +153,14 @@ void Wb35Tx_stop(phw_data_t pHwData)
if (pWb35Tx->EP2vm_state == VM_RUNNING)
usb_unlink_urb( pWb35Tx->Tx2Urb ); // Only use unlink, let Wb35Tx_destrot to free them
#ifdef _PE_TX_DUMP_
- WBDEBUG(("EP2 Tx stop\n"));
+ printk("EP2 Tx stop\n");
#endif

// Trying to canceling the Irp of EP4
if (pWb35Tx->EP4vm_state == VM_RUNNING)
usb_unlink_urb( pWb35Tx->Tx4Urb ); // Only use unlink, let Wb35Tx_destrot to free them
#ifdef _PE_TX_DUMP_
- WBDEBUG(("EP4 Tx stop\n"));
+ printk("EP4 Tx stop\n");
#endif
}

@@ -182,7 +182,7 @@ void Wb35Tx_destroy(phw_data_t pHwData)
usb_free_urb( pWb35Tx->Tx2Urb );

#ifdef _PE_TX_DUMP_
- WBDEBUG(("Wb35Tx_destroy OK\n"));
+ printk("Wb35Tx_destroy OK\n");
#endif
}

@@ -229,7 +229,7 @@ static void Wb35Tx_EP2VM_complete(struct urb * pUrb)

//The Urb is completed, check the result
if (pWb35Tx->EP2VM_status != 0) {
- WBDEBUG(("EP2 IoCompleteRoutine return error\n"));
+ printk("EP2 IoCompleteRoutine return error\n");
pWb35Tx->EP2vm_state= VM_STOP;
goto error;
}
@@ -279,7 +279,7 @@ static void Wb35Tx_EP2VM(struct wbsoft_priv *adapter)

if (retv < 0) {
#ifdef _PE_TX_DUMP_
- WBDEBUG(("EP2 Tx Irp sending error\n"));
+ printk("EP2 Tx Irp sending error\n");
#endif
goto error;
}
diff --git a/drivers/staging/winbond/wbhal.c b/drivers/staging/winbond/wbhal.c
index d7bbb9a..3dfb422 100644
--- a/drivers/staging/winbond/wbhal.c
+++ b/drivers/staging/winbond/wbhal.c
@@ -396,7 +396,7 @@ static void hal_set_current_channel_ex( phw_data_t pHwData, ChanInfo channel )
pHwData->Channel = channel.ChanNo;
pHwData->band = channel.band;
#ifdef _PE_STATE_DUMP_
- WBDEBUG(("Set channel is %d, band =%d\n", pHwData->Channel, pHwData->band));
+ printk("Set channel is %d, band =%d\n", pHwData->Channel, pHwData->band);
#endif
reg->M28_MacControl &= ~0xff; // Clean channel information field
reg->M28_MacControl |= channel.ChanNo;
diff --git a/drivers/staging/winbond/wbhal_s.h b/drivers/staging/winbond/wbhal_s.h
index 513babb..068a327 100644
--- a/drivers/staging/winbond/wbhal_s.h
+++ b/drivers/staging/winbond/wbhal_s.h
@@ -3,8 +3,6 @@

#include <linux/types.h>

-#include "common.h"
-
//[20040722 WK]
#define HAL_LED_SET_MASK 0x001c //20060901 Extend
#define HAL_LED_SET_SHIFT 2
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 008f0fb..7bb9d48 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -277,7 +277,7 @@ static unsigned char wb35_hw_init(struct ieee80211_hw *hw)
//get current antenna
priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
#ifdef _PE_STATE_DUMP_
- WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo));
+ printk("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo);
#endif
hal_get_hw_radio_off( pHwData );

@@ -398,7 +398,7 @@ static void wb35_hw_halt(struct wbsoft_priv *adapter)
// Turn off Rx and Tx hardware ability
hal_stop( &adapter->sHwData );
#ifdef _PE_USB_INI_DUMP_
- WBDEBUG(("[w35und] Hal_stop O.K.\n"));
+ printk("[w35und] Hal_stop O.K.\n");
#endif
msleep(100);// Waiting Irp completed

--
1.5.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/