Re: [PATCH] OMAP: MMC: recover from transfer failures (was: Re:[PATCH 5/5] omap mmc: Add new omap hsmmc controller for 2430 and34xx)

From: Tony Lindgren
Date: Wed Jan 07 2009 - 10:40:49 EST

Next message: Alan Cox: "Re: Bug: Status/Summary of slashdot leap-second crash on new years2008-2009"
Previous message: Jiri Slaby: "[PATCH 1/1] cpu: create stop machine in disable_nonboot_cpus"
In reply to: Jean Pihet: "[PATCH] OMAP: MMC: recover from transfer failures (was: Re: [PATCH 5/5] omap mmc: Add new omap hsmmc controller for 2430 and 34xx)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

* Jean Pihet <jpihet@xxxxxxxxxx> [090107 12:28]:
> Tony, Pierre,
>
> Here is a patch that fixes a MMC host controller deadlock. The problem happens
> when removing the MMC/SD device when a transfer is on-going.
>
> It has been tested on OMAP3430 but this fix should apply to OMAP2 chips as
> well, as seen from the TRMs.
>
> What do you think?

Looks OK to me, adding Jarkko to Cc.

Tony

> Regards,
> Jean.
>
> OMAP: MMC: recover from transfer failures
>
> Timeouts during a command that has a data phase can result in the
> next command issued after the command that failed not being processed,
> i.e. no interrupt ever occurs to indicate the command has completed.
> This failure can result in a deadlock.
>
> The indication that the mmc host controller is in this error state is
> that the DATI bit is set in the PSTATE register. This patch checks
> to see if the DATI bit is set before starting a new command, and if it
> is set it resets the data state machine to clear the error.
>
> Tested on OMAP3430 chip and intensive MMC/SD device removal while
> transferring data.
>
> Regards,
> Jean
>
>
> From 48a40925a4d57f6e7e45809a4b5c09b20f9314d7 Mon Sep 17 00:00:00 2001
> From: Jean Pihet <jpihet@xxxxxxxxxx>
> Date: Tue, 16 Dec 2008 19:44:12 +0100
> Subject: [PATCH] OMAP: MMC: recover from transfer failures
>
> Timeouts during a command that has a data phase can result in the
> next command issued after the command that failed not being processed,
> i.e. no interrupt ever occurs to indicate the command has completed.
> This failure can result in a deadlock.
>
> The indication that the mmc host controller is in this error state is
> that the DATI bit is set in the PSTATE register. This patch checks
> to see if the DATI bit is set before starting a new command, and if it
> is set it resets the data state machine to clear the error.
>
> Tested on OMAP3430 chip and intensive MMC/SD device removal while
> transferring data.
>
> Signed-off-by: Andy Lowe <alowe@xxxxxxxxxx>
> Signed-off-by: Jean Pihet <jpihet@xxxxxxxxxx>
> ---
> drivers/mmc/host/omap_hsmmc.c | 11 +++++++++++
> 1 files changed, 11 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index 1fcc544..b7d111e 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -44,6 +44,7 @@
> #define OMAP_HSMMC_RSP54 0x0118
> #define OMAP_HSMMC_RSP76 0x011C
> #define OMAP_HSMMC_DATA 0x0120
> +#define OMAP_HSMMC_PSTATE 0x0124
> #define OMAP_HSMMC_HCTL 0x0128
> #define OMAP_HSMMC_SYSCTL 0x012C
> #define OMAP_HSMMC_STAT 0x0130
> @@ -89,6 +90,7 @@
> #define DUAL_VOLT_OCR_BIT 7
> #define SRC (1 << 25)
> #define SRD (1 << 26)
> +#define DATI (1 << 1)
>
> /*
> * FIXME: Most likely all the data using these _DEVID defines should come
> @@ -273,6 +275,15 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct
> mmc_command *cmd,
> mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
> host->cmd = cmd;
>
> + if (OMAP_HSMMC_READ(host->base, PSTATE) & DATI) {
> + dev_dbg(mmc_dev(host->mmc), "mmc_omap_start_command: "
> + " resetting data state machine\n");
> + OMAP_HSMMC_WRITE(host->base, SYSCTL,
> + OMAP_HSMMC_READ(host->base, SYSCTL) | SRD);
> + while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD)
> + ;
> + }
> +
> /*
> * Clear status bits and enable interrupts
> */
> --
> 1.5.4.4.21.gc4a6c
>
>
> On Wednesday 07 January 2009 11:18:13 Tony Lindgren wrote:
> > * Pierre Ossman <drzeus-mmc@xxxxxxxxx> [081231 19:59]:
> > > On Tue, 30 Dec 2008 10:36:26 +0200
> > >
> > > Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> > > > Here's one more version that leaves out the unnecessary TWL4030
> > > > dependency in the Kconfig as pointed out by David Brownell.
> > >
> > > Looks ok.
> > >
> > > Acked-by: Pierre Ossman <drzeus@xxxxxxxxx>
> >
> > Thanks, I'll queue it up with Russell with one change
> > to include <mach/dma.h> instead of <asm/dma.h>.
> >
> > All further patches to this driver will come to you via
> > LKML.
> >
> > Regards,
> >
> > Tony
> >
> > > --
> > > -- Pierre Ossman
> > >
> > > Linux kernel, MMC maintainer http://www.kernel.org
> > > rdesktop, core developer http://www.rdesktop.org
> > >
> > > WARNING: This correspondence is being monitored by the
> > > Swedish government. Make sure your server uses encryption
> > > for SMTP traffic and consider using PGP for end-to-end
> > > encryption.
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe linux-kernel"
> > > in the body of a message to majordomo@xxxxxxxxxxxxxxx
> > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > > Please read the FAQ at http://www.tux.org/lkml/
> >
> > -------------------------------------------------------------------
> > List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
> > FAQ: http://www.arm.linux.org.uk/mailinglists/faq.php
> > Etiquette: http://www.arm.linux.org.uk/mailinglists/etiquette.php
>
>

> From 48a40925a4d57f6e7e45809a4b5c09b20f9314d7 Mon Sep 17 00:00:00 2001
> From: Jean Pihet <jpihet@xxxxxxxxxx>
> Date: Tue, 16 Dec 2008 19:44:12 +0100
> Subject: [PATCH] OMAP: MMC: recover from transfer failures
>
> Timeouts during a command that has a data phase can result in the
> next command issued after the command that failed not being processed,
> i.e. no interrupt ever occurs to indicate the command has completed.
> This failure can result in a deadlock.
>
> The indication that the mmc host controller is in this error state is
> that the DATI bit is set in the PSTATE register. This patch checks
> to see if the DATI bit is set before starting a new command, and if it
> is set it resets the data state machine to clear the error.
>
> Tested on OMAP3430 chip and intensive MMC/SD device removal while
> transferring data.
>
> Signed-off-by: Andy Lowe <alowe@xxxxxxxxxx>
> Signed-off-by: Jean Pihet <jpihet@xxxxxxxxxx>
> ---
> drivers/mmc/host/omap_hsmmc.c | 11 +++++++++++
> 1 files changed, 11 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index 1fcc544..b7d111e 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -44,6 +44,7 @@
> #define OMAP_HSMMC_RSP54 0x0118
> #define OMAP_HSMMC_RSP76 0x011C
> #define OMAP_HSMMC_DATA 0x0120
> +#define OMAP_HSMMC_PSTATE 0x0124
> #define OMAP_HSMMC_HCTL 0x0128
> #define OMAP_HSMMC_SYSCTL 0x012C
> #define OMAP_HSMMC_STAT 0x0130
> @@ -89,6 +90,7 @@
> #define DUAL_VOLT_OCR_BIT 7
> #define SRC (1 << 25)
> #define SRD (1 << 26)
> +#define DATI (1 << 1)
>
> /*
> * FIXME: Most likely all the data using these _DEVID defines should come
> @@ -273,6 +275,15 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd,
> mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
> host->cmd = cmd;
>
> + if (OMAP_HSMMC_READ(host->base, PSTATE) & DATI) {
> + dev_dbg(mmc_dev(host->mmc), "mmc_omap_start_command: "
> + " resetting data state machine\n");
> + OMAP_HSMMC_WRITE(host->base, SYSCTL,
> + OMAP_HSMMC_READ(host->base, SYSCTL) | SRD);
> + while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD)
> + ;
> + }
> +
> /*
> * Clear status bits and enable interrupts
> */
> --
> 1.5.4.4.21.gc4a6c
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Alan Cox: "Re: Bug: Status/Summary of slashdot leap-second crash on new years2008-2009"
Previous message: Jiri Slaby: "[PATCH 1/1] cpu: create stop machine in disable_nonboot_cpus"
In reply to: Jean Pihet: "[PATCH] OMAP: MMC: recover from transfer failures (was: Re: [PATCH 5/5] omap mmc: Add new omap hsmmc controller for 2430 and 34xx)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]