Re: 2.6.27.10: ata1.00: HPA detected: current 293044655, native 293046768

[Justin Piszcz]

On Wed, 31 Dec 2008, Mark Lord wrote:

> Robert Hancock wrote:
> > Justin Piszcz wrote:
> > > On one system, two Raptor 150s:
> > >
> > > [    0.739402] ata1.00: HPA detected: current 293044655, native 293046768
> ..
> > Presumably somebody or something set up a host protected area on one drive 
> > and not the other.. I believe there are some utilities out there that can 
> > be used to disable the HPA and allow the full capacity to be used.
> ..
>
> "hdparm -N" can do this, temporarily or permanently.
> Get the latest version from Sourceforge, and see the manpage for details.
>
> -ml
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Just incase someone Google's this later on, this is what it looks like,
for my case:

The /dev/sda (first disk) is the one with the problem.

root@Knoppix:~/hpa# hdparm -N /dev/sda

/dev/sda:
 max sectors   = 293044655/293046768, HPA is enabled
root@Knoppix:~/hpa# hdparm -N /dev/sdb

/dev/sdb:
 max sectors   = 293046768/293046768, HPA is disabled
root@Knoppix:~/hpa# hdparm -N p293046768 /dev/sda

/dev/sda:
 setting max visible sectors to 293046768 (permanent)
 max sectors   = 293046768/293046768, HPA is disabled
root@Knoppix:~/hpa#

root@Knoppix:~# hdparm -N /dev/sda

/dev/sda:
 max sectors   = 293046768/293046768, HPA is disabled
root@Knoppix:~#

1. I backed up the volume of the RAID-1 array.
2. Failed out the disk with the problem.
3. Then ran the commands above.
4. Reboot back to the OS.
5. Re-add the disk back into the RAID-1.


Justin.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/