Re: [PATCH] USB: Driver for Freescale QUICC Engine USB HostController

From: Anton Vorontsov
Date: Wed Dec 24 2008 - 14:11:58 EST


On Tue, Dec 23, 2008 at 09:45:09PM -0500, Alan Stern wrote:
> On Wed, 24 Dec 2008, Anton Vorontsov wrote:
>
> > This patch adds support for the FHCI USB controller, as found
> > in the Freescale MPC836x and MPC832x processors. It can support
> > Full or Low speed modes.
> >
> > Quite a lot the hardware is doing by itself (SOF generation, CRC
> > generation and checking), though scheduling and retransmission is on
> > software's shoulders.
> >
> > This controller does not integrate the root hub, so this driver also
> > fakes one-port hub. External hub is required to support more than
> > one device.
>
> It looks like the kernel this was written for is several versions out
> of date.

Yeah, originally it was written for 2.6.10. Though the driver I
posted is for the linux-next, and it works quite well w/o the
{un,}link_urb calls. ;-)

> The driver is missing some critical calls to functions like
> usb_hcd_link_urb_to_ep().

Fixed.

Thanks for review!

--
Anton Vorontsov
email: cbouatmailru@xxxxxxxxx
irc://irc.freenode.net/bd2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/