Re: Problem with thermal control: ACPI: Critical trip point -Critical temperature reached - shutting down.

[Alessandro Bono]

On Sat, 2008-12-20 at 00:06 -0600, Robert Hancock wrote:

[...]

> Are the fan(s) running? What does /proc/acpi/fan/*/* show?

yes fans are running and on load system become noisy
below with idle system

sandro@champagne:~$ cat /proc/acpi/thermal_zone/*/*
<setting not supported>                            
<polling disabled>                                 
state:                   active[1]                 
temperature:             80 C                      
critical (S5):           256 C                     
passive:                 100 C: tc1=1 tc2=2 tsp=300 devices=CPU0 CPU1 
active[0]:               85 C: devices=C387                           
active[1]:               65 C: devices=C388                           
active[2]:               60 C: devices=C389                           
active[3]:               50 C: devices=C38A                           
active[4]:               35 C: devices=C38B                           
<setting not supported>                                               
<polling disabled>                                                    
state:                   ok                                           
temperature:             67 C                                         
critical (S5):           105 C                                        
<setting not supported>                                               
<polling disabled>                                                    
state:                   active[2]                                    
temperature:             65 C                                         
critical (S5):           105 C                                        
active[0]:               100 C: devices=C36F                          
active[1]:               75 C: devices=C36A                           
active[2]:               60 C: devices=C36B                           
active[3]:               55 C: devices=C36C                           
active[4]:               45 C: devices=C36D                           
active[5]:               35 C: devices=C36E                           
<setting not supported>                                               
<polling disabled>                                                    
state:                   ok                                           
temperature:             57 C                                         
critical (S5):           105 C                                        
passive:                 95 C: tc1=1 tc2=2 tsp=300 devices=CPU0 CPU1  
<setting not supported>                                               
<polling disabled>                                                    
state:                   ok                                           
temperature:             30 C                                         
critical (S5):           105 C                                        
passive:                 60 C: tc1=1 tc2=2 tsp=300 devices=CPU0 CPU1  
<setting not supported>
<polling disabled>
state:                   ok
temperature:             75 C
critical (S5):           110 C
sandro@champagne:~$ acpi -V
     Battery 0: Full, 96%
  AC Adapter 0: on-line
     Thermal 0: ok, 67.0 degrees C
     Thermal 1: ok, 80.0 degrees C
     Thermal 2: ok, 75.0 degrees C
     Thermal 3: ok, 29.6 degrees C
     Thermal 4: ok, 57.0 degrees C
     Thermal 5: ok, 65.0 degrees C
     Cooling 0: LCD 0 of 10
     Cooling 1: Processor 0 of 10
     Cooling 2: Processor 0 of 10
     Cooling 3: Fan 1 of 1
     Cooling 4: Fan 1 of 1
     Cooling 5: Fan 1 of 1
     Cooling 6: Fan 1 of 1
     Cooling 7: Fan 0 of 1
     Cooling 8: Fan 0 of 1
     Cooling 9: Fan 1 of 1
     Cooling 10: Fan 1 of 1
     Cooling 11: Fan 1 of 1
     Cooling 12: Fan 1 of 1
     Cooling 13: Fan 0 of 1
sandro@champagne:~$ cat /proc/acpi/fan/*/*
status:                  off              
status:                  on               
status:                  on               
status:                  on               
status:                  on               
status:                  off              
status:                  off              
status:                  on               
status:                  on               
status:                  on               
status:                  on               



and on full load 


sandro@champagne:~$ acpi -V        
     Battery 0: Full, 96%          
  AC Adapter 0: on-line            
     Thermal 0: ok, 101.0 degrees C
     Thermal 1: ok, 85.0 degrees C 
     Thermal 2: ok, 100.0 degrees C
     Thermal 3: ok, 30.1 degrees C 
     Thermal 4: ok, 65.0 degrees C 
     Thermal 5: ok, 79.0 degrees C 
     Cooling 0: LCD 0 of 10        
     Cooling 1: Processor 0 of 10  
     Cooling 2: Processor 0 of 10  
     Cooling 3: Fan 1 of 1         
     Cooling 4: Fan 1 of 1         
     Cooling 5: Fan 1 of 1         
     Cooling 6: Fan 1 of 1         
     Cooling 7: Fan 1 of 1         
     Cooling 8: Fan 0 of 1         
     Cooling 9: Fan 1 of 1         
     Cooling 10: Fan 1 of 1        
     Cooling 11: Fan 1 of 1        
     Cooling 12: Fan 1 of 1        
     Cooling 13: Fan 1 of 1        
sandro@champagne:~$ cat /proc/acpi/thermal_zone/*/*
<setting not supported>                            
<polling disabled>                                 
state:                   active[0]                 
temperature:             85 C                      
critical (S5):           256 C                     
passive:                 100 C: tc1=1 tc2=2 tsp=300 devices=CPU0 CPU1 
active[0]:               85 C: devices=C387                           
active[1]:               65 C: devices=C388                           
active[2]:               60 C: devices=C389                           
active[3]:               50 C: devices=C38A                           
active[4]:               35 C: devices=C38B                           
<setting not supported>                                               
<polling disabled>                                                    
state:                   ok                                           
temperature:             101 C                                        
critical (S5):           105 C                                        
<setting not supported>                                               
<polling disabled>                                                    
state:                   active[1]                                    
temperature:             79 C                                         
critical (S5):           105 C                                        
active[0]:               100 C: devices=C36F
active[1]:               70 C: devices=C36A
active[2]:               60 C: devices=C36B
active[3]:               55 C: devices=C36C
active[4]:               45 C: devices=C36D
active[5]:               35 C: devices=C36E
<setting not supported>
<polling disabled>
state:                   ok
temperature:             65 C
critical (S5):           105 C
passive:                 95 C: tc1=1 tc2=2 tsp=300 devices=CPU0 CPU1
<setting not supported>
<polling disabled>
state:                   ok
temperature:             30 C
critical (S5):           105 C
passive:                 60 C: tc1=1 tc2=2 tsp=300 devices=CPU0 CPU1
<setting not supported>
<polling disabled>
state:                   ok
temperature:             100 C
critical (S5):           110 C
sandro@champagne:~$ cat /proc/acpi/fan/*/*
status:                  on
status:                  on
status:                  on
status:                  on
status:                  on
status:                  off
status:                  on
status:                  on
status:                  on
status:                  on
status:                  on



---

Cordiali Saluti
Alessandro Bono

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/