Panic: NMI Watchdog detected LOCKUP on CPU

[Carsten Menke]

Hi List,

I hope this is not the too wrong place to ask a question about the issue in the subject as the problem arises with a rather old 2.6.15 Kernel of an Ubuntu 6.06 Installation. But as nobody has even looked at the report I filed in the Ubuntu Bug database for 2  months. I try my luck here. I got a HP ML 350 G5 Server running and I occasionly receive kernel panics (vary from 1 time per week up to 2 months). I just want to get any pointer if this may be a hardware issue or a kernel issue, which in turn may have been fixed in a later version. As only Red Hat is supported by HP it will get rather difficult to get someone on service (we have an extended On site Warranty) an replace parts as we're running Ubuntu on the server and 2nd the diagnostic CD (Smart Start) shows that everything is ok (That of course doesn't mean, i trust these tools to much).

One thing I noted is that always the smbd process occurs in the panic log, the second thing is that it seems that it is unrelated to the system load as it happened 1 time during full working hours and another time during the night whe the server was absolutly idle (The server in turn does not do much more than a load of 20% either).

So here is the log I caputred via syslogd from netconsole and the dmesg, please apologize that due to syslog some lines are split across multiple lines, which show actually up as one on the console

Hope someone get me anywhere

Carsten

-- 
Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger

Attachment: syslog.mail.log
Description: Binary data

[    0.000000] Bootdata ok (command line is root=/dev/cciss/c0d0p5 ro console=ttyS1 console=tty0 quiet splash)
[    0.000000] Linux version 2.6.15-52-amd64-server (buildd@king) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP Wed Aug 20 13:36:39 UTC 2008
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000dfe54000 (usable)
[    0.000000]  BIOS-e820: 00000000dfe54000 - 00000000dfe5c000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000dfe5c000 - 00000000dfe5d000 (usable)
[    0.000000]  BIOS-e820: 00000000dfe5d000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000011ffff000 (usable)
[    0.000000] ACPI: RSDP (v002 HP                                    ) @ 0x00000000000f4f00
[    0.000000] ACPI: XSDT (v001 HP     ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000dfe547c0
[    0.000000] ACPI: FADT (v003 HP     ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000dfe54840
[    0.000000] ACPI: SPCR (v001 HP     SPCRRBSU 0x00000001 Ò 0x0000162e) @ 0x00000000dfe54140
[    0.000000] ACPI: MCFG (v001 HP     ProLiant 0x00000001  0x00000000) @ 0x00000000dfe541c0
[    0.000000] ACPI: HPET (v001 HP     ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000dfe54200
[    0.000000] ACPI: SPMI (v005 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000dfe54240
[    0.000000] ACPI: ERST (v001 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000dfe54280
[    0.000000] ACPI: MADT (v001 HP     ProLiant 0x00000002  0x00000000) @ 0x00000000dfe54480
[    0.000000] ACPI: FFFF (v001 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000dfe54540
[    0.000000] ACPI: BERT (v001 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000dfe546c0
[    0.000000] ACPI: HEST (v001 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000dfe54700
[    0.000000] ACPI: SSDT (v001 HP        SSDTP 0x00000001 INTL 0x20061109) @ 0x00000000dfe59000
[    0.000000] ACPI: DSDT (v001 HP         DSDT 0x00000001 INTL 0x20061109) @ 0x0000000000000000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000011ffff000
[    0.000000] Bootmem setup node 0 0000000000000000-000000011ffff000
[    0.000000] On node 0 totalpages: 1030978
[    0.000000]   DMA zone: 2997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 898701 pages, LIFO batch:31
[    0.000000]   Normal zone: 129280 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages, LIFO batch:0
[    0.000000] ACPI: PM-Timer IO Port: 0x908
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] Processor #6 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] Processor #7 6:15 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to physical flat
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at f1000000 (gap: f0000000:ec00000)
[    0.000000] Checking aperture...
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] Built 1 zonelists
[    0.000000] Kernel command line: root=/dev/cciss/c0d0p5 ro console=ttyS1 console=tty0 quiet splash
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes)
[    0.000000] time.c: Using 14.318180 MHz HPET timer.
[    0.000000] time.c: Detected 2333.420 MHz processor.
[   82.838254] Console: colour VGA+ 80x25
[   82.840116] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   82.842153] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   82.842437] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[   82.872444] Placing software IO TLB between 0x5580000 - 0x9580000
[   82.904749] Memory: 4044144k/4718588k available (2116k kernel code, 148060k reserved, 807k data, 180k init)
[   82.984676] Calibrating delay using timer specific routine.. 4671.05 BogoMIPS (lpj=9342101)
[   82.984720] Security Framework v1.0.0 initialized
[   82.984725] SELinux:  Disabled at boot.
[   82.984751] Mount-cache hash table entries: 256
[   82.984860] CPU: L1 I cache: 32K, L1 D cache: 32K
[   82.984862] CPU: L2 cache: 4096K
[   82.984864] using mwait in idle threads.
[   82.984866] CPU: Physical Processor ID: 0
[   82.984867] CPU: Processor Core ID: 0
[   82.984869] MCE: warning: using only 6 banks
[   82.984874] CPU0: Thermal monitoring enabled (TM2)
[   82.984877] mtrr: v2.0 (20020519)
[   82.984979] checking if image is initramfs... it is
[   83.509232] Freeing initrd memory: 7141k freed
[   83.513266] ACPI: Looking for DSDT ... not found!
[   83.555506] activating NMI Watchdog ... done.
[   83.555512] Using local APIC timer interrupts.
[   83.598287] Detected 20.834 MHz APIC timer.
[   83.598417] Booting processor 1/4 APIC 0x6
[   83.608963] Initializing CPU#1
[   83.687326] Calibrating delay using timer specific routine.. 4666.97 BogoMIPS (lpj=9333950)
[   83.687334] CPU: L1 I cache: 32K, L1 D cache: 32K
[   83.687335] CPU: L2 cache: 4096K
[   83.687338] CPU: Physical Processor ID: 3
[   83.687339] CPU: Processor Core ID: 0
[   83.687341] MCE: warning: using only 6 banks
[   83.687346] CPU1: Thermal monitoring enabled (TM2)
[   83.687806] Intel(R) Xeon(R) CPU            5140  @ 2.33GHz stepping 06
[   83.687813] APIC error on CPU1: 00(40)
[   83.687820] CPU 1: Syncing TSC to CPU 0.
[   83.687983] CPU 1: synchronized TSC with CPU 0 (last diff 3 cycles, maxerr 1029 cycles)
[   83.688060] Booting processor 2/4 APIC 0x1
[   83.699558] Initializing CPU#2
[   83.779149] Calibrating delay using timer specific routine.. 4666.95 BogoMIPS (lpj=9333919)
[   83.779158] CPU: L1 I cache: 32K, L1 D cache: 32K
[   83.779160] CPU: L2 cache: 4096K
[   83.779162] CPU: Physical Processor ID: 0
[   83.779163] CPU: Processor Core ID: 1
[   83.779165] MCE: warning: using only 6 banks
[   83.779170] CPU2: Thermal monitoring enabled (TM2)
[   83.779630] Intel(R) Xeon(R) CPU            5140  @ 2.33GHz stepping 06
[   83.779637] APIC error on CPU2: 00(40)
[   83.779644] CPU 2: Syncing TSC to CPU 0.
[   83.779740] CPU 2: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 567 cycles)
[   83.779847] Booting processor 3/4 APIC 0x7
[   83.792133] Initializing CPU#3
[   83.870974] Calibrating delay using timer specific routine.. 4666.98 BogoMIPS (lpj=9333974)
[   83.870982] CPU: L1 I cache: 32K, L1 D cache: 32K
[   83.870984] CPU: L2 cache: 4096K
[   83.870986] CPU: Physical Processor ID: 3
[   83.870988] CPU: Processor Core ID: 1
[   83.870990] MCE: warning: using only 6 banks
[   83.870994] CPU3: Thermal monitoring enabled (TM2)
[   83.871456] Intel(R) Xeon(R) CPU            5140  @ 2.33GHz stepping 06
[   83.871463] APIC error on CPU3: 00(40)
[   83.871471] CPU 3: Syncing TSC to CPU 0.
[   83.871634] CPU 3: synchronized TSC with CPU 0 (last diff 3 cycles, maxerr 1029 cycles)
[   83.871642] Brought up 4 CPUs
[   83.871679] time.c: Using HPET/TSC based timekeeping.
[   83.871681] testing NMI watchdog ... OK.
[   83.912003] NET: Registered protocol family 16
[   83.912025] ACPI: bus type pci registered
[   83.912030] PCI: Using configuration type 1
[   83.916659] PCI: Using MMCONFIG at e0000000
[   83.917342] ACPI: Subsystem revision 20051216
[   83.918769] ACPI: Interpreter enabled
[   83.918771] ACPI: Using IOAPIC for interrupt routing
[   83.919157] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   83.919160] PCI: Probing PCI hardware (bus 00)
[   83.919181] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[   83.920367] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[   83.929620] Boot video device is 0000:01:03.0
[   83.929845] PCI: Transparent bridge - 0000:00:1e.0
[   83.929881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   83.931822] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
[   83.932030] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTA._PRT]
[   83.932138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT]
[   83.932228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.PEX2._PRT]
[   83.932498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT]
[   83.932620] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1._PRT]
[   83.933011] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE2._PRT]
[   83.933406] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT]
[   83.933824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT05.EEPB._PRT]
[   83.933931] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT05.EEPB.EPPB._PRT]
[   83.934978] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
[   83.935138] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
[   83.935290] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
[   83.935443] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[   83.935594] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
[   83.935746] ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
[   83.935897] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
[   83.936048] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
[   83.936162] Linux Plug and Play Support v0.97 (c) Adam Belay
[   83.936169] pnp: PnP ACPI init
[   83.937354] pnp: PnP ACPI: found 10 devices
[   83.937364] PCI: Using ACPI for IRQ routing
[   83.937366] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   83.937572] hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
[   83.937575] hpet0: 3 64-bit timers, 14318180 Hz
[   83.938715] pnp: 00:00: ioport range 0x408-0x40f has been reserved
[   83.938718] pnp: 00:00: ioport range 0x4d0-0x4d1 has been reserved
[   83.938720] pnp: 00:00: ioport range 0x700-0x71f has been reserved
[   83.939025] PCI: Bridge: 0000:05:00.0
[   83.939026]   IO window: disabled.
[   83.939100]   MEM window: disabled.
[   83.939146]   PREFETCH window: disabled.
[   83.939237] PCI: Bridge: 0000:05:01.0
[   83.939238]   IO window: disabled.
[   83.939329]   MEM window: disabled.
[   83.939375]   PREFETCH window: disabled.
[   83.939466] PCI: Bridge: 0000:04:00.0
[   83.939467]   IO window: disabled.
[   83.939557]   MEM window: disabled.
[   83.939603]   PREFETCH window: disabled.
[   83.939694] PCI: Bridge: 0000:04:00.3
[   83.939695]   IO window: disabled.
[   83.939786]   MEM window: disabled.
[   83.939832]   PREFETCH window: disabled.
[   83.939923] PCI: Bridge: 0000:00:02.0
[   83.939924]   IO window: disabled.
[   83.939926]   MEM window: fdd00000-fddfffff
[   83.939927]   PREFETCH window: disabled.
[   83.939929] PCI: Bridge: 0000:00:03.0
[   83.939930]   IO window: disabled.
[   83.939932]   MEM window: disabled.
[   83.939933]   PREFETCH window: disabled.
[   83.939935] PCI: Bridge: 0000:00:04.0
[   83.939936]   IO window: disabled.
[   83.939938]   MEM window: disabled.
[   83.939939]   PREFETCH window: disabled.
[   83.939943] PCI: Bridge: 0000:13:04.0
[   83.939944]   IO window: 5000-5fff
[   83.939948]   MEM window: fdf00000-fdffffff
[   83.939950]   PREFETCH window: f8000000-f83fffff
[   83.939953] PCI: Bridge: 0000:12:00.0
[   83.939955]   IO window: 4000-5fff
[   83.939958]   MEM window: fde00000-fdffffff
[   83.939961]   PREFETCH window: f8000000-f85fffff
[   83.939963] PCI: Bridge: 0000:00:05.0
[   83.939965]   IO window: 4000-5fff
[   83.939967]   MEM window: fde00000-fdffffff
[   83.939969]   PREFETCH window: f8000000-f85fffff
[   83.939971] PCI: Bridge: 0000:02:00.0
[   83.939972]   IO window: disabled.
[   83.939976]   MEM window: fa000000-fbffffff
[   83.939979]   PREFETCH window: f8600000-f86fffff
[   83.939983] PCI: Bridge: 0000:00:1c.0
[   83.939984]   IO window: disabled.
[   83.939987]   MEM window: fa000000-fbffffff
[   83.939990]   PREFETCH window: f8600000-f86fffff
[   83.939994] PCI: Bridge: 0000:00:1e.0
[   83.939995]   IO window: 2000-3fff
[   83.939998]   MEM window: f9e00000-f9ffffff
[   83.940001]   PREFETCH window: f0000000-f7ffffff
[   83.940008] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   83.940243] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   83.940564] GSI 16 sharing vector 0xA9 and IRQ 16
[   83.940567] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[   83.940609] PCI: Setting latency timer of device 0000:05:00.0 to 64
[   83.940929] GSI 17 sharing vector 0xB1 and IRQ 17
[   83.940931] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 17 (level, low) -> IRQ 177
[   83.940975] PCI: Setting latency timer of device 0000:05:01.0 to 64
[   83.941294] PCI: Setting latency timer of device 0000:04:00.3 to 64
[   83.941343] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   83.941347] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   83.941351] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   83.941361] PCI: Setting latency timer of device 0000:12:00.0 to 64
[   83.941376] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[   83.941380] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   83.941395] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   83.941402] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   83.942208] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[   83.942647] audit: initializing netlink socket (disabled)
[   83.942661] audit(1223223322.104:1): initialized
[   83.942889] VFS: Disk quotas dquot_6.5.1
[   83.942907] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   83.942969] Initializing Cryptographic API
[   83.942973] io scheduler noop registered
[   83.942981] io scheduler anticipatory registered
[   83.942989] io scheduler deadline registered
[   83.943010] io scheduler cfq registered
[   83.961690] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   83.961694] pcie_portdrv_probe->Dev[25f7:8086] has invalid IRQ. Check vendor BIOS
[   83.961715] assign_interrupt_mode Found MSI capability
[   83.961761] Allocate Port Service[pcie00]
[   83.961805] Allocate Port Service[pcie01]
[   83.961845] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   83.961847] pcie_portdrv_probe->Dev[25e3:8086] has invalid IRQ. Check vendor BIOS
[   83.961860] assign_interrupt_mode Found MSI capability
[   83.961876] Allocate Port Service[pcie00]
[   83.961909] Allocate Port Service[pcie01]
[   83.961945] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   83.961947] pcie_portdrv_probe->Dev[25e4:8086] has invalid IRQ. Check vendor BIOS
[   83.961960] assign_interrupt_mode Found MSI capability
[   83.961976] Allocate Port Service[pcie00]
[   83.962011] Allocate Port Service[pcie01]
[   83.962057] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   83.962059] pcie_portdrv_probe->Dev[25e5:8086] has invalid IRQ. Check vendor BIOS
[   83.962071] assign_interrupt_mode Found MSI capability
[   83.962086] Allocate Port Service[pcie00]
[   83.962128] Allocate Port Service[pcie01]
[   83.962170] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[   83.962174] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   83.962198] assign_interrupt_mode Found MSI capability
[   83.962225] Allocate Port Service[pcie00]
[   83.962275] Allocate Port Service[pcie03]
[   83.962448] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   83.962493] pcie_portdrv_probe->Dev[3500:8086] has invalid IRQ. Check vendor BIOS
[   83.963316] Allocate Port Service[pcie10]
[   83.963359] Allocate Port Service[pcie11]
[   83.963600] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[   83.963636] PCI: Setting latency timer of device 0000:05:00.0 to 64
[   83.964504] assign_interrupt_mode Found MSI capability
[   83.965419] Allocate Port Service[pcie20]
[   83.965461] Allocate Port Service[pcie21]
[   83.965602] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 17 (level, low) -> IRQ 177
[   83.965648] PCI: Setting latency timer of device 0000:05:01.0 to 64
[   83.966515] assign_interrupt_mode Found MSI capability
[   83.967430] Allocate Port Service[pcie20]
[   83.967474] Allocate Port Service[pcie21]
[   83.985215] Real Time Clock Driver v1.12
[   83.985331] hpet_resources: 0xfed00000 is busy
[   83.985340] Linux agpgart interface v0.101 (c) Dave Jones
[   83.985457] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[   83.997983] serio: i8042 AUX port at 0x60,0x64 irq 12
[   83.998912] serio: i8042 KBD port at 0x60,0x64 irq 1
[   83.998915] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[   83.999061] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   83.999142] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   84.001013] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   84.001598] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   84.001648] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   84.001651] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   84.001839] mice: PS/2 mouse device common for all mice
[   84.003840] NET: Registered protocol family 2
[   84.058400] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   84.058851] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[   84.062108] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   84.062640] TCP: Hash tables configured (established 262144 bind 65536)
[   84.062642] TCP reno registered
[   84.062757] TCP bic registered
[   84.062768] NET: Registered protocol family 1
[   84.062774] NET: Registered protocol family 8
[   84.062775] NET: Registered protocol family 20
[   84.062882] ACPI wakeup devices: 
[   84.062883] PCI0 
[   84.062885] ACPI: (supports S0 S4 S5)
[   84.063043] Freeing unused kernel memory: 180k freed
[   84.096385] vga16fb: initializing
[   84.096388] vga16fb: mapped to 0xffff8100000a0000
[   84.157151] input: AT Translated Set 2 keyboard as /class/input/input0
[   84.343416] Console: switching to colour frame buffer device 80x25
[   84.343419] fb0: VGA16 VGA frame buffer device
[   84.351250] Capability LSM initialized
[   84.376998] ACPI: Thermal Zone [THM0] (8 C)
[   84.659532] SCSI subsystem initialized
[   84.660131] Fusion MPT base driver 3.03.04
[   84.660133] Copyright (c) 1999-2005 LSI Logic Corporation
[   84.661558] Fusion MPT SPI Host driver 3.03.04
[   84.661603] GSI 18 sharing vector 0x3A and IRQ 18
[   84.661606] ACPI: PCI Interrupt 0000:14:01.0[A] -> GSI 19 (level, low) -> IRQ 58
[   84.661627] mptbase: Initiating ioc0 bringup
[   85.132854] ioc0: 53C1030: Capabilities={Initiator,Target}
[   85.442222] scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=58
[   86.191419]   Vendor: HP        Model: C7438A            Rev: ZP76
[   86.191429]   Type:   Sequential-Access                  ANSI SCSI revision: 03
[   89.007659] HP CISS Driver (v 2.6.8)
[   89.007685] cciss: Device 0x3238 has been found at bus 19 dev 8 func 0
[   89.007721] ACPI: PCI Interrupt 0000:13:08.0[A] -> GSI 19 (level, low) -> IRQ 58
[   89.049083] cciss: using DAC cycles
[   89.061180]       blocks= 143305920 block_size= 512
[   89.065213]       heads= 255, sectors= 32, cylinders= 17562
[   89.065214] 
[   89.065401]       blocks= 143305920 block_size= 512
[   89.065512]       heads= 255, sectors= 32, cylinders= 17562
[   89.065513] 
[   89.065517]  cciss/c0d0: p1 p2 p3 < p5 p6 p7 p8 p9 >
[   89.328012] ESB2: IDE controller at PCI slot 0000:00:1f.1
[   89.328021] ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI - using IRQ 7
[   89.328033] ESB2: chipset revision 9
[   89.328034] ESB2: not 100% native mode: will probe irqs later
[   89.328042]     ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:DMA, hdb:pio
[   89.328054]     ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:pio
[   89.328062] Probing IDE interface ide0...
[   90.064101] hda: HL-DT-STDVD+-RW GSA-H21L, ATAPI CD/DVD-ROM drive
[   90.399532] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   90.399572] Probing IDE interface ide1...
[   90.975016] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[   90.975022] Uniform CD-ROM driver Revision: 3.20
[   91.012776] usbcore: registered new driver usbfs
[   91.012791] usbcore: registered new driver hub
[   91.013416] USB Universal Host Controller Interface driver v2.3
[   91.013464] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
[   91.013473] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   91.013476] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   91.013774] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   91.013782] uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001000
[   91.013855] hub 1-0:1.0: USB hub found
[   91.013861] hub 1-0:1.0: 2 ports detected
[   91.118534] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
[   91.118544] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   91.118548] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   91.118584] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   91.118596] uhci_hcd 0000:00:1d.1: irq 177, io base 0x00001020
[   91.118686] hub 2-0:1.0: USB hub found
[   91.118692] hub 2-0:1.0: 2 ports detected
[   91.223486] GSI 19 sharing vector 0x42 and IRQ 19
[   91.223490] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 66
[   91.223495] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   91.223498] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   91.223536] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   91.223543] uhci_hcd 0000:00:1d.2: irq 66, io base 0x00001040
[   91.223613] hub 3-0:1.0: USB hub found
[   91.223618] hub 3-0:1.0: 2 ports detected
[   91.328678] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 58
[   91.328684] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   91.328687] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   91.328719] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   91.328724] uhci_hcd 0000:00:1d.3: irq 58, io base 0x00001060
[   91.328795] hub 4-0:1.0: USB hub found
[   91.328800] hub 4-0:1.0: 2 ports detected
[   91.433784] GSI 20 sharing vector 0x4A and IRQ 20
[   91.433786] ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 74
[   91.433793] uhci_hcd 0000:01:04.4: UHCI Host Controller
[   91.433803] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
[   91.434696] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5
[   91.434702] uhci_hcd 0000:01:04.4: irq 74, io base 0x00003800
[   91.434704] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169
[   91.436330] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   91.436335] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   91.436375] ehci_hcd 0000:00:1d.7: debug port 1
[   91.436380] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   91.436411] hub 5-0:1.0: USB hub found
[   91.436419] hub 5-0:1.0: 2 ports detected
[   91.538797] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
[   91.538805] ehci_hcd 0000:00:1d.7: irq 169, io mem 0xf9df0000
[   91.542673] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   91.542745] hub 6-0:1.0: USB hub found
[   91.542751] hub 6-0:1.0: 8 ports detected
[   91.661522] Probing IDE interface ide1...
[   91.777144] usb 5-1: new full speed USB device using uhci_hcd and address 2
[   92.171454] usb 5-2: new full speed USB device using uhci_hcd and address 3
[   92.322585] hub 5-2:1.0: USB hub found
[   92.325794] hub 5-2:1.0: 7 ports detected
[   92.449817] usbcore: registered new driver hiddev
[   92.456316] input: HP Virtual Keyboard as /class/input/input1
[   92.456324] input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
[   92.462760] input: HP Virtual Keyboard as /class/input/input2
[   92.462772] input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
[   92.462778] usbcore: registered new driver usbhid
[   92.462780] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   92.485347] Attempting manual resume
[   92.490003] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   92.490251] SGI XFS Quota Management subsystem
[   92.491361] XFS mounting filesystem cciss/c0d0p5
[   92.554316] Ending clean XFS mount for filesystem: cciss/c0d0p5
[   93.443420] ts: Compaq touchscreen protocol output
[   93.465883] st: Version 20050830, fixed bufsize 32768, s/g segs 256
[   93.465985] st 0:0:3:0: Attached scsi tape st0<4>st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 1179647
[   93.476263] st 0:0:3:0: Attached scsi generic sg0 type 1
[   93.834234] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   93.841689] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   94.011531] input: PC Speaker as /class/input/input3
[   94.016056] hw_random hardware driver 1.0.0 loaded
[   94.020853] Floppy drive(s): fd0 is 1.44M
[   94.025928] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.4.30 (October 11, 2005)
[   94.025951] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[   94.027405] eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 169, node addr 0019bb35501e
[   94.170866] bnx2: eth0: using MSI
[   97.036527] floppy0: no floppy controllers found
[   97.157699] lp: driver loaded but no devices found
[   97.187872] netconsole: local port 6665
[   97.187875] netconsole: interface eth0
[   97.187877] netconsole: remote port 514
[   97.187879] netconsole: remote IP 192.168.120.3
[   97.187881] netconsole: remote ethernet address 00:e0:18:5b:e2:7b
[   97.187885] netconsole: local IP 192.168.120.1
[   97.196225] netconsole: network logging started
[   97.248145] Adding 2000084k swap on /dev/cciss/c0d0p2.  Priority:-1 extents:1 across:2000084k
[   97.351084] bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
[   97.371859] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[   97.371862] md: bitmap version 4.39
[   97.569823] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
[   97.846475] cdrom: open failed.
[   98.255570] kjournald starting.  Commit interval 5 seconds
[   98.255699] EXT3 FS on cciss/c0d0p1, internal journal
[   98.255704] EXT3-fs: mounted filesystem with ordered data mode.
[   98.256906] XFS mounting filesystem cciss/c0d0p9
[   98.347776] Ending clean XFS mount for filesystem: cciss/c0d0p9
[   98.358369] XFS mounting filesystem cciss/c0d0p6
[   98.423140] Ending clean XFS mount for filesystem: cciss/c0d0p6
[   98.432706] XFS mounting filesystem cciss/c0d0p7
[   98.497717] Ending clean XFS mount for filesystem: cciss/c0d0p7
[   98.507407] XFS mounting filesystem cciss/c0d0p8
[   98.592454] Ending clean XFS mount for filesystem: cciss/c0d0p8
[   99.063872] NET: Registered protocol family 10
[   99.063989] lo: Disabled Privacy Extensions
[   99.064093] IPv6 over IPv4 tunneling driver
[  101.318108] tun: Universal TUN/TAP device driver, 1.6
[  101.318112] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[  109.631635] eth0: no IPv6 routers present