Re: [PATCH 15/16] Blackfin SPI Driver: fix bug - spi controller driver does not assert/deassert CS correctly

[David Brownell]

On Monday 17 November 2008, Bryan Wu wrote:
> From: Yi Li <yi.li@xxxxxxxxxx>
> 
> This bug can be observed when two SPI devices are sharing the spi bus:
> One device is set as SPI CS 7, another one is using SPI CS 4.
> 
> In spi_bfin5xx.c: cs_active(), cs_deactive() are used to control SPI_FLG
> register. From the debug bellow:
> 
> cs_active: flag: 0x7f91, chip->flag: 0x7f80, cs: 7
> cs_active: flag: 0xef91, chip->flag: 0xef10, cs: 4
> 
> When device A (cs_7) activate CS 7, SPI_FLG is set as 0x7f91 (however,
> SPI_FLG should be set as 0x7f80, or 0x6f91 if in broadcast mode).
> 
> Due to some HW bug (very possibly), if SPI_FLG is set as 0x7f91,
> SPISSEL7 is asserted, however SPISSEL4 will be asserted too (I can see
> this using the scope). This is unreasonable according to HRM.
> 
> Signed-off-by: Yi Li <yi.li@xxxxxxxxxx>
> Signed-off-by: Bryan Wu <cooloney@xxxxxxxxxx>

Acked-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>

Yay!  Real patch comments!  Although ... it doesn't exactly
say *how* it was fixed, which would make the comments better.
("Clear flags that were wrongly left set." maybe.)

Saying what was fixed is at least a start.


> ---
>  drivers/spi/spi_bfin5xx.c |    5 ++---
>  1 files changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
> index 9c602ad..8cf5d6e 100644
> --- a/drivers/spi/spi_bfin5xx.c
> +++ b/drivers/spi/spi_bfin5xx.c
> @@ -189,6 +189,7 @@ static void cs_deactive(struct driver_data *drv_data, struct chip_data *chip)
>  {
>  	u16 flag = read_FLAG(drv_data);
>  
> +	flag &= ~chip->flag;
>  	flag |= (chip->flag << 8);
>  
>  	write_FLAG(drv_data, flag);
> @@ -1032,7 +1033,6 @@ static int setup(struct spi_device *spi)
>  	struct bfin5xx_spi_chip *chip_info = NULL;
>  	struct chip_data *chip;
>  	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
> -	u8 spi_flg;
>  
>  	/* Abort device setup if requested features are not supported */
>  	if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) {
> @@ -1115,8 +1115,7 @@ static int setup(struct spi_device *spi)
>  	 * SPI_BAUD, not the real baudrate
>  	 */
>  	chip->baud = hz_to_spi_baud(spi->max_speed_hz);
> -	spi_flg = ~(1 << (spi->chip_select));
> -	chip->flag = ((u16) spi_flg << 8) | (1 << (spi->chip_select));
> +	chip->flag = 1 << (spi->chip_select);
>  	chip->chip_select_num = spi->chip_select;
>  
>  	switch (chip->bits_per_word) {
> -- 
> 1.5.6.3
> 
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/