AMD64 reboot regression

From: Michael B. Trausch
Date: Sun Nov 02 2008 - 15:30:39 EST

Next message: Sam Ravnborg: "Re: [PATCH] el3_common_init() should be __devinit, not __init"
Previous message: Sam Ravnborg: "Re: [PATCH] tags: link from CONFIG_x to 'config x' as well"
Next in thread: Simon Arlott: "Re: [Bug 11910] AMD64 reboot regression"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I started testing 2.6.28 with -rc1 on my system (x86-64, AMD Phenom
9500 Quad Core CPU) and found that I was unable to reboot, though I was
able to with the Ubuntu-provided 2.6.27 kernel. I have found that a
commit on 17-Oct-2008 (commit 8fd145917fb62368a9b80db59562c20576238f5a)
is responsible for this failure to reboot. Reversing this single change
on my local kernel (current git tree plus this patch) has enabled me to
reboot again.

System board information is attached in the hopes that it will be found
helpful; if any other information is necessary please let me know.

The patch that reverts this change is attached, with stat:

drivers/acpi/reboot.c | 25 +++----------------------
1 files changed, 3 insertions(+), 22 deletions(-)

--- Mike

--
My sigfile ran away and is on hiatus.
http://www.trausch.us/

Dumping 132 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
info.capabilities = {'cpufreq_control'} (string list)
info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
info.product = 'Computer' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/computer' (string)
org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
power_management.acpi.linux.version = '20080926' (string)
power_management.can_hibernate = false (bool)
power_management.can_suspend = false (bool)
power_management.can_suspend_hybrid = false (bool)
power_management.is_powersave_set = false (bool)
power_management.type = 'acpi' (string)
system.chassis.manufacturer = 'To Be Filled By O.E.M.' (string)
system.chassis.type = 'Desktop' (string)
system.firmware.release_date = '01/22/2008' (string)
system.firmware.vendor = 'American Megatrends Inc.' (string)
system.firmware.version = 'P2.20' (string)
system.formfactor = 'desktop' (string)
system.hardware.primary_video.product = 1339 (0x53b) (int)
system.hardware.primary_video.vendor = 4318 (0x10de) (int)
system.hardware.product = 'To Be Filled By O.E.M.' (string)
system.hardware.serial = 'To Be Filled By O.E.M.' (string)
system.hardware.uuid = '00020003-0004-0005-0006-000700080009' (string)
system.hardware.vendor = 'To Be Filled By O.E.M.' (string)
system.hardware.version = 'To Be Filled By O.E.M.' (string)
system.kernel.machine = 'x86_64' (string)
system.kernel.name = 'Linux' (string)
system.kernel.version = '2.6.28-rc2-00474-g4129d53' (string)

udi = '/org/freedesktop/Hal/devices/acpi_P001'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AMD Phenom(tm) 9500 Quad-Core Processor' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_P001' (string)
linux.acpi_path = '/proc/acpi/processor/P001' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = false (bool)
processor.number = 0 (0x0) (int)

udi = '/org/freedesktop/Hal/devices/acpi_P002'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AMD Phenom(tm) 9500 Quad-Core Processor' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_P002' (string)
linux.acpi_path = '/proc/acpi/processor/P002' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = false (bool)
processor.number = 1 (0x1) (int)

udi = '/org/freedesktop/Hal/devices/acpi_P003'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AMD Phenom(tm) 9500 Quad-Core Processor' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_P003' (string)
linux.acpi_path = '/proc/acpi/processor/P003' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = false (bool)
processor.number = 2 (0x2) (int)

udi = '/org/freedesktop/Hal/devices/acpi_P004'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AMD Phenom(tm) 9500 Quad-Core Processor' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_P004' (string)
linux.acpi_path = '/proc/acpi/processor/P004' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = false (bool)
processor.number = 3 (0x3) (int)

udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
access_control.file = '/dev/snd/timer' (string)
access_control.type = 'sound' (string)
alsa.device_file = '/dev/snd/timer' (string)
alsa.type = 'timer' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Timer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string)
linux.device_file = '/dev/snd/timer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
access_control.file = '/dev/sequencer2' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string)
linux.device_file = '/dev/sequencer2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string)
oss.device_file = '/dev/sequencer2' (string)
oss.type = 'sequencer' (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
access_control.file = '/dev/sequencer' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string)
linux.device_file = '/dev/sequencer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string)
oss.device_file = '/dev/sequencer' (string)
oss.type = 'sequencer' (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
access_control.file = '/dev/snd/seq' (string)
access_control.type = 'sound' (string)
alsa.device_file = '/dev/snd/seq' (string)
alsa.type = 'sequencer' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string)
linux.device_file = '/dev/snd/seq' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button (CM)' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string)
input.device = '/dev/input/event1' (string)
input.product = 'Power Button (CM)' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button (FF)' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string)
input.device = '/dev/input/event0' (string)
input.product = 'Power Button (FF)' (string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Board' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0d' (string)
pnp.description = 'System Board' (string)
pnp.id = 'PNP0c01' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0c' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0b' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
info.linux.driver = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '16550A-compatible COM port' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string)
pnp.description = '16550A-compatible COM port' (string)
pnp.id = 'PNP0501' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string)
info.product = '16550A-compatible COM port' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0' (string)
linux.device_file = '/dev/ttyS0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0a/tty/ttyS0' (string)
serial.device = '/dev/ttyS0' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string)
serial.port = 0 (0x0) (int)
serial.type = 'platform' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
info.linux.driver = 'i8042 kbd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:09' (string)
pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
pnp.id = 'PNP0303' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:08' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
info.linux.driver = 'rtc_cmos' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT Real-Time Clock' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:07' (string)
pnp.description = 'AT Real-Time Clock' (string)
pnp.id = 'PNP0b00' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:06' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ECP printer port' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0401' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:05' (string)
pnp.description = 'ECP printer port' (string)
pnp.id = 'PNP0401' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PC standard floppy disk controller' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0700' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:04' (string)
pnp.description = 'PC standard floppy disk controller' (string)
pnp.id = 'PNP0700' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Math Coprocessor' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:03' (string)
pnp.description = 'Math Coprocessor' (string)
pnp.id = 'PNP0c04' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT-style speaker sound' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:02' (string)
pnp.description = 'AT-style speaker sound' (string)
pnp.id = 'PNP0800' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT DMA Controller' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:01' (string)
pnp.description = 'AT DMA Controller' (string)
pnp.id = 'PNP0200' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PCI Bus' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:00' (string)
pnp.description = 'PCI Bus' (string)
pnp.id = 'PNP0a03' (string)

udi = '/org/freedesktop/Hal/devices/platform_w83627ehf_656'
info.linux.driver = 'w83627ehf' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (w83627ehf.656)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_w83627ehf_656' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/w83627ehf.656' (string)
platform.id = 'w83627ehf.656' (string)

udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
info.linux.driver = 'vesafb' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (vesafb.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/vesafb.0' (string)
platform.id = 'vesafb.0' (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250'
info.linux.driver = 'serial8250' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (serial8250)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/serial8250' (string)
platform.id = 'serial8250' (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
info.linux.driver = 'pcspkr' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (pcspkr)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/pcspkr' (string)
platform.id = 'pcspkr' (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
info.capabilities = {'input'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
info.product = 'PC Speaker' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' (string)
input.device = '/dev/input/event2' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
input.product = 'PC Speaker' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input2/event2' (string)

udi = '/org/freedesktop/Hal/devices/platform_microcode'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (microcode)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_microcode' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/microcode' (string)
platform.id = 'microcode' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042'
info.linux.driver = 'i8042' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (i8042)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/i8042' (string)
platform.id = 'i8042' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
info.linux.driver = 'atkbd' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 KBD port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string)
serio.description = 'i8042 KBD port' (string)
serio.id = 'serio0' (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
info.product = 'AT Translated Set 2 keyboard' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string)
input.device = '/dev/input/event3' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
input.product = 'AT Translated Set 2 keyboard' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'evdev' (string)
input.xkb.variant = 'intl' (string)
linux.device_file = '/dev/input/event3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input3/event3' (string)

udi = '/org/freedesktop/Hal/devices/platform_floppy_0'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (floppy.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/floppy.0' (string)
platform.id = 'floppy.0' (string)

udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage_platform_floppy'
access_control.file = '/dev/fd0' (string)
access_control.type = 'removable-block' (string)
block.device = '/dev/fd0' (string)
block.is_volume = false (bool)
block.major = 2 (0x2) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/platform_floppy_0_storage_platform_floppy' (string)
info.addons = {'hald-addon-storage'} (string list)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'storage', 'block', 'access_control'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent = '/org/freedesktop/Hal/devices/platform_floppy_0' (string)
info.product = 'PC Floppy Drive' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage_platform_floppy' (string)
info.vendor = '' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/platform/floppy.0/block/fd0' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.automount_enabled_hint = true (bool)
storage.bus = 'platform' (string)
storage.drive_type = 'floppy' (string)
storage.hotpluggable = false (bool)
storage.media_check_enabled = false (bool)
storage.model = '' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/platform_floppy_0' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.requires_eject = false (bool)
storage.size = 0 (0x0) (uint64)
storage.vendor = 'PC Floppy Drive' (string)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'uid='} (string list)

udi = '/org/freedesktop/Hal/devices/pci_1022_1204'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Family 10h [Opteron, Athlon64, Sempron] Link Control' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1022_1204' (string)
info.vendor = 'Advanced Micro Devices [AMD]' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.4' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.4' (string)
pci.product = 'Family 10h [Opteron, Athlon64, Sempron] Link Control' (string)
pci.product_id = 4612 (0x1204) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Advanced Micro Devices [AMD]' (string)
pci.vendor_id = 4130 (0x1022) (int)

udi = '/org/freedesktop/Hal/devices/pci_1022_1203'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1022_1203' (string)
info.vendor = 'Advanced Micro Devices [AMD]' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3' (string)
pci.product = 'Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control' (string)
pci.product_id = 4611 (0x1203) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Advanced Micro Devices [AMD]' (string)
pci.vendor_id = 4130 (0x1022) (int)

udi = '/org/freedesktop/Hal/devices/pci_1022_1202'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Family 10h [Opteron, Athlon64, Sempron] DRAM Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1022_1202' (string)
info.vendor = 'Advanced Micro Devices [AMD]' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2' (string)
pci.product = 'Family 10h [Opteron, Athlon64, Sempron] DRAM Controller' (string)
pci.product_id = 4610 (0x1202) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Advanced Micro Devices [AMD]' (string)
pci.vendor_id = 4130 (0x1022) (int)

udi = '/org/freedesktop/Hal/devices/pci_1022_1201'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Family 10h [Opteron, Athlon64, Sempron] Address Map' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1022_1201' (string)
info.vendor = 'Advanced Micro Devices [AMD]' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1' (string)
pci.product = 'Family 10h [Opteron, Athlon64, Sempron] Address Map' (string)
pci.product_id = 4609 (0x1201) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Advanced Micro Devices [AMD]' (string)
pci.vendor_id = 4130 (0x1022) (int)

udi = '/org/freedesktop/Hal/devices/pci_1022_1200'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1022_1200' (string)
info.vendor = 'Advanced Micro Devices [AMD]' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0' (string)
pci.product = 'Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration' (string)
pci.product_id = 4608 (0x1200) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Advanced Micro Devices [AMD]' (string)
pci.vendor_id = 4130 (0x1022) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_53b'
info.linux.driver = 'nvidia' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'GeForce 7050 PV / nForce 630a' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_53b' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0' (string)
pci.device_class = 3 (0x3) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0' (string)
pci.product = 'GeForce 7050 PV / nForce 630a' (string)
pci.product_id = 1339 (0x53b) (int)
pci.subsys_product_id = 1339 (0x53b) (int)
pci.subsys_vendor = 'ASRock Incorporation' (string)
pci.subsys_vendor_id = 6217 (0x1849) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_563_4'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 PCI Express Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_563_4' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0' (string)
pci.product = 'MCP67 PCI Express Bridge' (string)
pci.product_id = 1379 (0x563) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_563_3'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 PCI Express Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_563_3' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0' (string)
pci.product = 'MCP67 PCI Express Bridge' (string)
pci.product_id = 1379 (0x563) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_563_2'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 PCI Express Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_563_2' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0' (string)
pci.product = 'MCP67 PCI Express Bridge' (string)
pci.product_id = 1379 (0x563) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_563_1'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 PCI Express Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_563_1' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0' (string)
pci.product = 'MCP67 PCI Express Bridge' (string)
pci.product_id = 1379 (0x563) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_563_0'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 PCI Express Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_563_0' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0' (string)
pci.product = 'MCP67 PCI Express Bridge' (string)
pci.product_id = 1379 (0x563) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_563'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 PCI Express Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_563' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0' (string)
pci.product = 'MCP67 PCI Express Bridge' (string)
pci.product_id = 1379 (0x563) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_562'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 PCI Express Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_562' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0' (string)
pci.product = 'MCP67 PCI Express Bridge' (string)
pci.product_id = 1378 (0x562) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_54c'
info.linux.driver = 'forcedeth' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 Ethernet' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_54c' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0' (string)
pci.device_class = 2 (0x2) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0' (string)
pci.product = 'MCP67 Ethernet' (string)
pci.product_id = 1356 (0x54c) (int)
pci.subsys_product_id = 1356 (0x54c) (int)
pci.subsys_vendor = 'ASRock Incorporation' (string)
pci.subsys_vendor_id = 6217 (0x1849) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/net_00_19_66_60_7b_2e'
info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
info.category = 'net.80203' (string)
info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_54c' (string)
info.product = 'Networking Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_19_66_60_7b_2e' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0/net/eth0' (string)
net.80203.mac_address = 109091781422 (0x1966607b2e) (uint64)
net.address = '00:19:66:60:7b:2e' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'eth0' (string)
net.linux.ifindex = 2 (0x2) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_10de_54c' (string)
org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)

udi = '/org/freedesktop/Hal/devices/pci_10de_550'
info.linux.driver = 'ahci' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 AHCI Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_550' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 133 (0x85) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0' (string)
pci.product = 'MCP67 AHCI Controller' (string)
pci.product_id = 1360 (0x550) (int)
pci.subsys_product_id = 1360 (0x550) (int)
pci.subsys_vendor = 'ASRock Incorporation' (string)
pci.subsys_vendor_id = 6217 (0x1849) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_2'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_550' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/host4/scsi_host/host4' (string)
scsi_host.host = 4 (0x4) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_1'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_550' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/host3/scsi_host/host3' (string)
scsi_host.host = 3 (0x3) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_0'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_550' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/host2' (string)
scsi_host.host = 2 (0x2) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_0_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_0' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_0_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/host2/scsi_host/host2' (string)
scsi_host.host = 2 (0x2) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_0_scsi_device_lun0'
info.linux.driver = 'sr' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_0' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_0_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/host2/target2:0:0/2:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 2 (0x2) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'BDDVDRW GGC-H20L' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'cdrom' (string)
scsi.vendor = 'HL-DT-ST' (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_0_scsi_device_lun0_scsi_generic'
info.capabilities = {'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_0_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.subsystem = 'scsi_generic' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_0_scsi_device_lun0_scsi_generic' (string)
linux.device_file = '/dev/sg2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/host2/target2:0:0/2:0:0:0/scsi_generic/sg2' (string)
scsi_generic.device = '/dev/sg2' (string)

udi = '/org/freedesktop/Hal/devices/storage_model_BDDVDRW_GGC_H20L'
access_control.file = '/dev/scd0' (string)
access_control.type = 'cdrom' (string)
block.device = '/dev/scd0' (string)
block.is_volume = false (bool)
block.major = 11 (0xb) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_model_BDDVDRW_GGC_H20L' (string)
info.addons = {'hald-addon-storage'} (string list)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control', 'access_control'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_0_scsi_device_lun0' (string)
info.product = 'BDDVDRW GGC-H20L' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_model_BDDVDRW_GGC_H20L' (string)
info.vendor = 'HL-DT-ST' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/host2/target2:0:0/2:0:0:0/block/sr0' (string)
org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
storage.automount_enabled_hint = true (bool)
storage.bus = 'scsi' (string)
storage.cdrom.bd = true (bool)
storage.cdrom.bdr = false (bool)
storage.cdrom.bdre = false (bool)
storage.cdrom.cdr = true (bool)
storage.cdrom.cdrw = true (bool)
storage.cdrom.dvd = true (bool)
storage.cdrom.dvdplusr = true (bool)
storage.cdrom.dvdplusrdl = true (bool)
storage.cdrom.dvdplusrw = true (bool)
storage.cdrom.dvdplusrwdl = false (bool)
storage.cdrom.dvdr = true (bool)
storage.cdrom.dvdram = true (bool)
storage.cdrom.dvdrw = true (bool)
storage.cdrom.hddvd = true (bool)
storage.cdrom.hddvdr = false (bool)
storage.cdrom.hddvdrw = false (bool)
storage.cdrom.mo = false (bool)
storage.cdrom.mrw = true (bool)
storage.cdrom.mrw_w = true (bool)
storage.cdrom.read_speed = 7056 (0x1b90) (int)
storage.cdrom.support_media_changed = true (bool)
storage.cdrom.support_multisession = true (bool)
storage.cdrom.write_speed = 7056 (0x1b90) (int)
storage.cdrom.write_speeds = {'7056', '5645', '4234', '2822', '1411', '706'} (string list)
storage.drive_type = 'cdrom' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = true (bool)
storage.model = 'BDDVDRW GGC-H20L' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = '' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = true (bool)
storage.size = 0 (0x0) (uint64)
storage.vendor = 'HL-DT-ST' (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_550' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/host1' (string)
scsi_host.host = 1 (0x1) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/host1/scsi_host/host1' (string)
scsi_host.host = 1 (0x1) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/host1/target1:0:0/1:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 1 (0x1) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'ST3320620AS' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'ATA' (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities = {'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.subsystem = 'scsi_generic' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file = '/dev/sg1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/host1/target1:0:0/1:0:0:0/scsi_generic/sg1' (string)
scsi_generic.device = '/dev/sg1' (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3320620AS_6QF211FQ'
block.device = '/dev/sda' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3320620AS_6QF211FQ' (string)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_550_scsi_host_scsi_device_lun0' (string)
info.product = 'ST3320620AS' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3320620AS_6QF211FQ' (string)
info.vendor = 'ATA' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/host1/target1:0:0/1:0:0:0/block/sda' (string)
storage.automount_enabled_hint = false (bool)
storage.bus = 'scsi' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = '3.AA' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = false (bool)
storage.model = 'ST3320620AS' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = 'mbr' (string)
storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 320072933376 (0x4a85d56000) (uint64)
storage.requires_eject = false (bool)
storage.serial = '1ATA_ST3320620AS_6QF211FQ' (string)
storage.size = 320072933376 (0x4a85d56000) (uint64)
storage.vendor = 'ATA' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_vVU2dE_uLxj_OXWI_TdoJ_7Qia_5USB_zNel0m'
block.device = '/dev/sda4' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 4 (0x4) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3320620AS_6QF211FQ' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3320620AS_6QF211FQ' (string)
info.product = 'Volume (LVM2_member)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_vVU2dE_uLxj_OXWI_TdoJ_7Qia_5USB_zNel0m' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/host1/target1:0:0/1:0:0:0/block/sda/sda4' (string)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'LVM2_member' (string)
volume.fsusage = 'raid' (string)
volume.fsversion = 'LVM2 001' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 455426685 (0x1b25427d) (uint64)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 4 (0x4) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 86891857920 (0x143b288800) (uint64)
volume.partition.type = '0x8e' (string)
volume.partition.uuid = '' (string)
volume.size = 233178462720 (0x364a84fa00) (uint64)
volume.uuid = 'vVU2dE-uLxj-OXWI-TdoJ-7Qia-5USB-zNel0m' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_932172fc_1e94_4756_a0b1_d4a89db9c5ca'
block.device = '/dev/sda3' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 3 (0x3) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3320620AS_6QF211FQ' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3320620AS_6QF211FQ' (string)
info.product = 'Volume (ext3)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_932172fc_1e94_4756_a0b1_d4a89db9c5ca' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/host1/target1:0:0/1:0:0:0/block/sda/sda3' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
volume.mount_point = '/boot' (string)
volume.num_blocks = 1959930 (0x1de7fa) (uint64)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 3 (0x3) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 85888373760 (0x13ff589400) (uint64)
volume.partition.type = '0x83' (string)
volume.partition.uuid = '' (string)
volume.size = 1003484160 (0x3bcff400) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '932172fc-1e94-4756-a0b1-d4a89db9c5ca' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_EF7F_5A45'
block.device = '/dev/sda2' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 2 (0x2) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3320620AS_6QF211FQ' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3320620AS_6QF211FQ' (string)
info.product = 'Volume (vfat)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_EF7F_5A45' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/host1/target1:0:0/1:0:0:0/block/sda/sda2' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'vfat' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = 'FAT32' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid=', 'flush'} (string list)
volume.mount_point = '' (string)
volume.num_blocks = 3903795 (0x3b9133) (uint64)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 2 (0x2) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 83889630720 (0x1388362e00) (uint64)
volume.partition.type = '0x0b' (string)
volume.partition.uuid = '' (string)
volume.size = 1998743040 (0x77226600) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'EF7F-5A45' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_B2845BD8845B9E23'
block.device = '/dev/sda1' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 1 (0x1) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3320620AS_6QF211FQ' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST3320620AS_6QF211FQ' (string)
info.product = 'Volume (ntfs)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_B2845BD8845B9E23' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/host1/target1:0:0/1:0:0:0/block/sda/sda1' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ntfs' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '3.1' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'locale=', 'utf8'} (string list)
volume.mount_point = '' (string)
volume.num_blocks = 163840000 (0x9c40000) (uint64)
volume.partition.flags = {'boot'} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 1 (0x1) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 1048576 (0x100000) (uint64)
volume.partition.type = '0x07' (string)
volume.partition.uuid = '' (string)
volume.size = 83886080000 (0x1388000000) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'B2845BD8845B9E23' (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_561'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 PCI Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_561' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 1 (0x1) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0' (string)
pci.product = 'MCP67 PCI Bridge' (string)
pci.product_id = 1377 (0x561) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/pci_1102_7'
info.linux.driver = 'CA0106' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_561' (string)
info.product = 'SB Audigy LS' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7' (string)
info.vendor = 'Creative Labs' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0' (string)
pci.device_class = 4 (0x4) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0' (string)
pci.product = 'SB Audigy LS' (string)
pci.product_id = 7 (0x7) (int)
pci.subsys_product_id = 4106 (0x100a) (int)
pci.subsys_vendor = 'Creative Labs' (string)
pci.subsys_vendor_id = 4354 (0x1102) (int)
pci.vendor = 'Creative Labs' (string)
pci.vendor_id = 4354 (0x1102) (int)

udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0'
info.capabilities = {'sound'} (string list)
info.category = 'sound' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1102_7' (string)
info.product = 'Audigy SE [SB0570] Sound Card' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0/sound/card0' (string)
sound.card = 0 (0x0) (int)
sound.card_id = 'Audigy SE [SB0570]' (string)
sound.originating_device = '/org/freedesktop/Hal/devices/pci_1102_7' (string)

udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_playback_3'
access_control.file = '/dev/snd/pcmC0D3p' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'Audigy SE [SB0570]' (string)
alsa.device = 3 (0x3) (int)
alsa.device_file = '/dev/snd/pcmC0D3p' (string)
alsa.device_id = 'CA0106' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'playback' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
info.product = 'CA0106 ALSA Playback Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_playback_3' (string)
linux.device_file = '/dev/snd/pcmC0D3p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0/sound/card0/pcmC0D3p' (string)

udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_capture_3'
access_control.file = '/dev/snd/pcmC0D3c' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'Audigy SE [SB0570]' (string)
alsa.device = 3 (0x3) (int)
alsa.device_file = '/dev/snd/pcmC0D3c' (string)
alsa.device_id = 'CA0106' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'capture' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
info.product = 'CA0106 ALSA Capture Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_capture_3' (string)
linux.device_file = '/dev/snd/pcmC0D3c' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0/sound/card0/pcmC0D3c' (string)

udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_playback_2'
access_control.file = '/dev/snd/pcmC0D2p' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'Audigy SE [SB0570]' (string)
alsa.device = 2 (0x2) (int)
alsa.device_file = '/dev/snd/pcmC0D2p' (string)
alsa.device_id = 'CA0106' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'playback' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
info.product = 'CA0106 ALSA Playback Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_playback_2' (string)
linux.device_file = '/dev/snd/pcmC0D2p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0/sound/card0/pcmC0D2p' (string)

udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_capture_2'
access_control.file = '/dev/snd/pcmC0D2c' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'Audigy SE [SB0570]' (string)
alsa.device = 2 (0x2) (int)
alsa.device_file = '/dev/snd/pcmC0D2c' (string)
alsa.device_id = 'CA0106' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'capture' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
info.product = 'CA0106 ALSA Capture Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_capture_2' (string)
linux.device_file = '/dev/snd/pcmC0D2c' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0/sound/card0/pcmC0D2c' (string)

udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_playback_1'
access_control.file = '/dev/snd/pcmC0D1p' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'Audigy SE [SB0570]' (string)
alsa.device = 1 (0x1) (int)
alsa.device_file = '/dev/snd/pcmC0D1p' (string)
alsa.device_id = 'CA0106' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'playback' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
info.product = 'CA0106 ALSA Playback Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_playback_1' (string)
linux.device_file = '/dev/snd/pcmC0D1p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0/sound/card0/pcmC0D1p' (string)

udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_capture_1'
access_control.file = '/dev/snd/pcmC0D1c' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'Audigy SE [SB0570]' (string)
alsa.device = 1 (0x1) (int)
alsa.device_file = '/dev/snd/pcmC0D1c' (string)
alsa.device_id = 'CA0106' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'capture' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
info.product = 'CA0106 ALSA Capture Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_capture_1' (string)
linux.device_file = '/dev/snd/pcmC0D1c' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0/sound/card0/pcmC0D1c' (string)

udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_playback_0'
access_control.file = '/dev/snd/pcmC0D0p' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'Audigy SE [SB0570]' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0p' (string)
alsa.device_id = 'CA0106' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'playback' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
info.product = 'CA0106 ALSA Playback Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_playback_0' (string)
linux.device_file = '/dev/snd/pcmC0D0p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0/sound/card0/pcmC0D0p' (string)

udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_capture_0'
access_control.file = '/dev/snd/pcmC0D0c' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'Audigy SE [SB0570]' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0c' (string)
alsa.device_id = 'CA0106' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'capture' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
info.product = 'CA0106 ALSA Capture Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_capture_0' (string)
linux.device_file = '/dev/snd/pcmC0D0c' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0/sound/card0/pcmC0D0c' (string)

udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_oss_mixer__1'
access_control.file = '/dev/mixer' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
info.product = 'CA0106 OSS Control Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_oss_mixer__1' (string)
linux.device_file = '/dev/mixer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0/sound/card0/mixer' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'Audigy SE [SB0570]' (string)
oss.device_file = '/dev/mixer' (string)
oss.device_id = 'CA0106' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
oss.type = 'mixer' (string)

udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_midi_0'
access_control.file = '/dev/snd/midiC0D0' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'Audigy SE [SB0570]' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/midiC0D0' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
alsa.type = 'midi' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
info.product = 'Audigy SE [SB0570] ALSA MIDI Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_midi_0' (string)
linux.device_file = '/dev/snd/midiC0D0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0/sound/card0/midiC0D0' (string)

udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_oss_midi_0'
access_control.file = '/dev/midi' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
info.product = 'CA0106 OSS MIDI Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_oss_midi_0' (string)
linux.device_file = '/dev/midi' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0/sound/card0/midi' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'Audigy SE [SB0570]' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/midi' (string)
oss.device_id = 'CA0106' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
oss.type = 'midi' (string)

udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_oss_pcm_0_0'
access_control.file = '/dev/dsp' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
info.product = 'CA0106 OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_oss_pcm_0_0' (string)
linux.device_file = '/dev/dsp' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0/sound/card0/dsp' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'Audigy SE [SB0570]' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/dsp' (string)
oss.device_id = 'CA0106' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
oss.type = 'pcm' (string)

udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_control__1'
access_control.file = '/dev/snd/controlC0' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'Audigy SE [SB0570]' (string)
alsa.device_file = '/dev/snd/controlC0' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
alsa.type = 'control' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
info.product = 'Audigy SE [SB0570] ALSA Control Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_alsa_control__1' (string)
linux.device_file = '/dev/snd/controlC0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0/sound/card0/controlC0' (string)

udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_oss_pcm_0'
access_control.file = '/dev/audio' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
info.product = 'CA0106 OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_oss_pcm_0' (string)
linux.device_file = '/dev/audio' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0/sound/card0/audio' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'Audigy SE [SB0570]' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/audio' (string)
oss.device_id = 'CA0106' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
oss.type = 'pcm' (string)

udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_oss_pcm_1'
access_control.file = '/dev/adsp' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
info.product = 'CA0106 OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0_oss_pcm_1' (string)
linux.device_file = '/dev/adsp' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:0a.0/sound/card0/adsp' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'Audigy SE [SB0570]' (string)
oss.device = 1 (0x1) (int)
oss.device_file = '/dev/adsp' (string)
oss.device_id = 'CA0106' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_1102_7_sound_card_0' (string)
oss.type = 'pcm' (string)

udi = '/org/freedesktop/Hal/devices/pci_9004_5078'
info.linux.driver = 'aic7xxx' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_561' (string)
info.product = 'AIC-7850' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_9004_5078' (string)
info.vendor = 'Adaptec' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:08.0' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:08.0' (string)
pci.product = 'AIC-7850' (string)
pci.product_id = 20600 (0x5078) (int)
pci.subsys_product_id = 30800 (0x7850) (int)
pci.subsys_vendor = 'Adaptec' (string)
pci.subsys_vendor_id = 36868 (0x9004) (int)
pci.vendor = 'Adaptec' (string)
pci.vendor_id = 36868 (0x9004) (int)

udi = '/org/freedesktop/Hal/devices/pci_9004_5078_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_9004_5078' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_9004_5078_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:08.0/host0' (string)
scsi_host.host = 0 (0x0) (int)

udi = '/org/freedesktop/Hal/devices/pci_9004_5078_scsi_host_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_9004_5078_scsi_host' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_9004_5078_scsi_host_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:08.0/host0/scsi_host/host0' (string)
scsi_host.host = 0 (0x0) (int)

udi = '/org/freedesktop/Hal/devices/pci_9004_5078_scsi_host_scsi_device_lun0'
info.parent = '/org/freedesktop/Hal/devices/pci_9004_5078_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_9004_5078_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:08.0/host0/target0:0:1/0:0:1:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 0 (0x0) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'C2520A' (string)
scsi.target = 1 (0x1) (int)
scsi.type = 'processor' (string)
scsi.vendor = 'HP' (string)

udi = '/org/freedesktop/Hal/devices/pci_9004_5078_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities = {'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_9004_5078_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.subsystem = 'scsi_generic' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_9004_5078_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file = '/dev/sg0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:08.0/host0/target0:0:1/0:0:1:0/scsi_generic/sg0' (string)
scsi_generic.device = '/dev/sg0' (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_560'
info.linux.driver = 'pata_amd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 IDE Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_560' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 138 (0x8a) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0' (string)
pci.product = 'MCP67 IDE Controller' (string)
pci.product_id = 1376 (0x560) (int)
pci.subsys_product_id = 1376 (0x560) (int)
pci.subsys_vendor = 'ASRock Incorporation' (string)
pci.subsys_vendor_id = 6217 (0x1849) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_560_scsi_host_0'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_560' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_560_scsi_host_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/host6/scsi_host/host6' (string)
scsi_host.host = 6 (0x6) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_560_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_560' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_560_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/host5' (string)
scsi_host.host = 5 (0x5) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_560_scsi_host_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_560_scsi_host' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_560_scsi_host_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/host5/scsi_host/host5' (string)
scsi_host.host = 5 (0x5) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_560_scsi_host_scsi_device_lun0'
info.linux.driver = 'sr' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_560_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_560_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/host5/target5:0:0/5:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 5 (0x5) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'DVDRRW GSA-H20L' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'cdrom' (string)
scsi.vendor = 'HL-DT-ST' (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_560_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities = {'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_560_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.subsystem = 'scsi_generic' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_560_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file = '/dev/sg3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/host5/target5:0:0/5:0:0:0/scsi_generic/sg3' (string)
scsi_generic.device = '/dev/sg3' (string)

udi = '/org/freedesktop/Hal/devices/storage_model_DVDRRW_GSA_H20L'
access_control.file = '/dev/scd1' (string)
access_control.type = 'cdrom' (string)
block.device = '/dev/scd1' (string)
block.is_volume = false (bool)
block.major = 11 (0xb) (int)
block.minor = 1 (0x1) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVDRRW_GSA_H20L' (string)
info.addons = {'hald-addon-storage'} (string list)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control', 'access_control'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_560_scsi_host_scsi_device_lun0' (string)
info.product = 'DVDRRW GSA-H20L' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_model_DVDRRW_GSA_H20L' (string)
info.vendor = 'HL-DT-ST' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/host5/target5:0:0/5:0:0:0/block/sr1' (string)
org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
storage.automount_enabled_hint = true (bool)
storage.bus = 'scsi' (string)
storage.cdrom.bd = false (bool)
storage.cdrom.bdr = false (bool)
storage.cdrom.bdre = false (bool)
storage.cdrom.cdr = true (bool)
storage.cdrom.cdrw = true (bool)
storage.cdrom.dvd = true (bool)
storage.cdrom.dvdplusr = true (bool)
storage.cdrom.dvdplusrdl = true (bool)
storage.cdrom.dvdplusrw = true (bool)
storage.cdrom.dvdplusrwdl = false (bool)
storage.cdrom.dvdr = true (bool)
storage.cdrom.dvdram = true (bool)
storage.cdrom.dvdrw = true (bool)
storage.cdrom.hddvd = false (bool)
storage.cdrom.hddvdr = false (bool)
storage.cdrom.hddvdrw = false (bool)
storage.cdrom.mo = false (bool)
storage.cdrom.mrw = true (bool)
storage.cdrom.mrw_w = true (bool)
storage.cdrom.read_speed = 7056 (0x1b90) (int)
storage.cdrom.support_media_changed = true (bool)
storage.cdrom.support_multisession = true (bool)
storage.cdrom.write_speed = 2770 (0xad2) (int)
storage.cdrom.write_speeds = {'2770'} (string list)
storage.drive_type = 'cdrom' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = true (bool)
storage.model = 'DVDRRW GSA-H20L' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.removable = true (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 1403486208 (0x53a78000) (uint64)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = true (bool)
storage.size = 0 (0x0) (uint64)
storage.vendor = 'HL-DT-ST' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_44FA_7FE3'
access_control.file = '/dev/scd1' (string)
access_control.type = 'removable-block' (string)
block.device = '/dev/scd1' (string)
block.is_volume = true (bool)
block.major = 11 (0xb) (int)
block.minor = 1 (0x1) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVDRRW_GSA_H20L' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'volume.disc', 'volume', 'block', 'access_control'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_model_DVDRRW_GSA_H20L' (string)
info.product = 'Volume (vfat)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_44FA_7FE3' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/host5/target5:0:0/5:0:0:0/block/sr1/fakevolume' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 2048 (0x800) (int)
volume.disc.capacity = 1403486208 (0x53a78000) (uint64)
volume.disc.has_audio = false (bool)
volume.disc.has_data = true (bool)
volume.disc.is_appendable = false (bool)
volume.disc.is_blank = false (bool)
volume.disc.is_blurayvideo = false (bool)
volume.disc.is_rewritable = true (bool)
volume.disc.is_svcd = false (bool)
volume.disc.is_vcd = false (bool)
volume.disc.is_videodvd = false (bool)
volume.disc.type = 'dvd_ram' (string)
volume.fstype = 'vfat' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = 'FAT12' (string)
volume.ignore = false (bool)
volume.is_disc = true (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = false (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid=', 'flush'} (string list)
volume.mount_point = '/media/cdrom0' (string)
volume.num_blocks = 2741184 (0x29d3c0) (uint64)
volume.size = 1403486208 (0x53a78000) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '44FA-7FE3' (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_55f_0'
info.linux.driver = 'ehci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 EHCI USB 2.0 Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_55f_0' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 32 (0x20) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1' (string)
pci.product = 'MCP67 EHCI USB 2.0 Controller' (string)
pci.product_id = 1375 (0x55f) (int)
pci.subsys_product_id = 1375 (0x55f) (int)
pci.subsys_vendor = 'ASRock Incorporation' (string)
pci.subsys_vendor_id = 6217 (0x1849) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_04_1'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_55f_0' (string)
info.product = '2.0 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_04_1' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/002/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1/usb2' (string)
usb_device.bus_number = 2 (0x2) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1/usb2' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 5 (0x5) (int)
usb_device.product = '2.0 root hub' (string)
usb_device.product_id = 2 (0x2) (int)
usb_device.serial = '0000:00:04.1' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_04_1' (string)
info.product = 'MyBook External HDD' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131' (string)
info.vendor = 'Western Digital Technologies, Inc.' (string)
linux.device_file = '/dev/bus/usb/002/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1/usb2/2-1' (string)
usb_device.bus_number = 2 (0x2) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1/usb2/2-1' (string)
usb_device.max_power = 100 (0x64) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'MyBook External HDD' (string)
usb_device.product_id = 2305 (0x901) (int)
usb_device.serial = '57442D574D414E4B32323630343131' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Western Digital Technologies, Inc.' (string)
usb_device.vendor_id = 4184 (0x1058) (int)
usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131_if0'
info.linux.driver = 'usb-storage' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131' (string)
info.product = 'USB Mass Storage Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1/usb2/2-1/2-1:1.0' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 8 (0x8) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 80 (0x50) (int)
usb.interface.subclass = 6 (0x6) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1/usb2/2-1/2-1:1.0' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Mass Storage Interface' (string)
usb.product_id = 2305 (0x901) (int)
usb.serial = '57442D574D414E4B32323630343131' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Western Digital Technologies, Inc.' (string)
usb.vendor_id = 4184 (0x1058) (int)
usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131_if0_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131_if0' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131_if0_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1/usb2/2-1/2-1:1.0/host7' (string)
scsi_host.host = 7 (0x7) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131_if0_scsi_host_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131_if0_scsi_host' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131_if0_scsi_host_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1/usb2/2-1/2-1:1.0/host7/scsi_host/host7' (string)
scsi_host.host = 7 (0x7) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131_if0_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131_if0_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131_if0_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1/usb2/2-1/2-1:1.0/host7/target7:0:0/7:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 7 (0x7) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = '2500JB External' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'WD' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131_if0_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities = {'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131_if0_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.subsystem = 'scsi_generic' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131_if0_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file = '/dev/sg4' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1/usb2/2-1/2-1:1.0/host7/target7:0:0/7:0:0:0/scsi_generic/sg4' (string)
scsi_generic.device = '/dev/sg4' (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_WD_2500JB_External_57442D574D414E4B32323630343131_0_0'
block.device = '/dev/sdb' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 16 (0x10) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WD_2500JB_External_57442D574D414E4B32323630343131_0_0' (string)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131_if0_scsi_host_scsi_device_lun0' (string)
info.product = '2500JB External' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_WD_2500JB_External_57442D574D414E4B32323630343131_0_0' (string)
info.vendor = 'WD' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1/usb2/2-1/2-1:1.0/host7/target7:0:0/7:0:0:0/block/sdb' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'usb' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = '0107' (string)
storage.hotpluggable = true (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = false (bool)
storage.model = '2500JB External' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_1058_901_57442D574D414E4B32323630343131_if0' (string)
storage.partitioning_scheme = 'mbr' (string)
storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 250059350016 (0x3a38b2e000) (uint64)
storage.requires_eject = false (bool)
storage.serial = 'WD_2500JB_External_57442D574D414E4B32323630343131-0:0' (string)
storage.size = 250059350016 (0x3a38b2e000) (uint64)
storage.vendor = 'WD' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_30FF27821566D335'
block.device = '/dev/sdb2' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 18 (0x12) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WD_2500JB_External_57442D574D414E4B32323630343131_0_0' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_WD_2500JB_External_57442D574D414E4B32323630343131_0_0' (string)
info.product = 'Win (External)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_30FF27821566D335' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1/usb2/2-1/2-1:1.0/host7/target7:0:0/7:0:0:0/block/sdb/sdb2' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ntfs' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '3.1' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'Win (External)' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'locale=', 'utf8'} (string list)
volume.mount_point = '/media/Win (External)' (string)
volume.num_blocks = 78798825 (0x4b25fe9) (uint64)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 250059350016 (0x3a38b2e000) (uint64)
volume.partition.number = 2 (0x2) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 209711738880 (0x30d3cb3000) (uint64)
volume.partition.type = '0x07' (string)
volume.partition.uuid = '' (string)
volume.size = 40344998400 (0x964bfd200) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '30FF27821566D335' (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_1c7fd67b_3213_4d8c_a416_bbcd2b7a6d61'
block.device = '/dev/sdb1' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 17 (0x11) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WD_2500JB_External_57442D574D414E4B32323630343131_0_0' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_WD_2500JB_External_57442D574D414E4B32323630343131_0_0' (string)
info.product = 'Ext4 (External)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_1c7fd67b_3213_4d8c_a416_bbcd2b7a6d61' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1/usb2/2-1/2-1:1.0/host7/target7:0:0/7:0:0:0/block/sdb/sdb1' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext4' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'Ext4 (External)' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list)
volume.mount_point = '/media/Ext4 (External)' (string)
volume.num_blocks = 409593177 (0x1869e559) (uint64)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 250059350016 (0x3a38b2e000) (uint64)
volume.partition.number = 1 (0x1) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 32256 (0x7e00) (uint64)
volume.partition.type = '0x83' (string)
volume.partition.uuid = '' (string)
volume.size = 209711706624 (0x30d3cab200) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '1c7fd67b-3213-4d8c-a416-bbcd2b7a6d61' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_04_1_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_04_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_04_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1/usb2/2-0:1.0' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.1/usb2/2-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 5 (0x5) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 2 (0x2) (int)
usb.serial = '0000:00:04.1' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/pci_10de_55e_0'
info.linux.driver = 'ohci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 OHCI USB 1.1 Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_55e_0' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 16 (0x10) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0' (string)
pci.product = 'MCP67 OHCI USB 1.1 Controller' (string)
pci.product_id = 1374 (0x55e) (int)
pci.subsys_product_id = 1374 (0x55e) (int)
pci.subsys_vendor = 'ASRock Incorporation' (string)
pci.subsys_vendor_id = 6217 (0x1849) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_04_0'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_55e_0' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_04_0' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/004/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/usb4' (string)
usb_device.bus_number = 4 (0x4) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/usb4' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 5 (0x5) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:04.0' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_45e_f1_noserial'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_04_0' (string)
info.product = 'Microsoft Wireless Desktop Receiver 3.1A' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_f1_noserial' (string)
info.vendor = 'Microsoft Corp.' (string)
linux.device_file = '/dev/bus/usb/004/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/usb4/4-2' (string)
usb_device.bus_number = 4 (0x4) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 2 (0x2) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/usb4/4-2' (string)
usb_device.max_power = 100 (0x64) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 2 (0x2) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'Microsoft Wireless Desktop Receiver 3.1A' (string)
usb_device.product_id = 241 (0xf1) (int)
usb_device.speed = 1.5 (1.5) (double)
usb_device.vendor = 'Microsoft Corp.' (string)
usb_device.vendor_id = 1118 (0x45e) (int)
usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_45e_f1_noserial_if1'
info.linux.driver = 'usbhid' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_f1_noserial' (string)
info.product = 'USB HID Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_f1_noserial_if1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.1' (string)
usb.bus_number = 4 (0x4) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 2 (0x2) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 3 (0x3) (int)
usb.interface.number = 1 (0x1) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.1' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB HID Interface' (string)
usb.product_id = 241 (0xf1) (int)
usb.speed = 1.5 (1.5) (double)
usb.vendor = 'Microsoft Corp.' (string)
usb.vendor_id = 1118 (0x45e) (int)
usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_45e_f1_noserial_if1_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'input.mouse', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_f1_noserial_if1' (string)
info.product = 'Microsft Microsoft Wireless Desktop Receiver 3.1A' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_f1_noserial_if1_logicaldev_input' (string)
input.device = '/dev/input/event5' (string)
input.originating_device = '/org/freedesktop/Hal/devices/usb_device_45e_f1_noserial_if1' (string)
input.product = 'Microsft Microsoft Wireless Desktop Receiver 3.1A' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'evdev' (string)
input.xkb.variant = 'intl' (string)
linux.device_file = '/dev/input/event5' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.1/input/input5/event5' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_45e_f1_noserial_if0'
info.linux.driver = 'usbhid' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_f1_noserial' (string)
info.product = 'USB HID Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_f1_noserial_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0' (string)
usb.bus_number = 4 (0x4) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 2 (0x2) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 3 (0x3) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 1 (0x1) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB HID Interface' (string)
usb.product_id = 241 (0xf1) (int)
usb.speed = 1.5 (1.5) (double)
usb.vendor = 'Microsoft Corp.' (string)
usb.vendor_id = 1118 (0x45e) (int)
usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_45e_f1_noserial_if0_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_f1_noserial_if0' (string)
info.product = 'Microsft Microsoft Wireless Desktop Receiver 3.1A' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_f1_noserial_if0_logicaldev_input' (string)
input.device = '/dev/input/event4' (string)
input.originating_device = '/org/freedesktop/Hal/devices/usb_device_45e_f1_noserial_if0' (string)
input.product = 'Microsft Microsoft Wireless Desktop Receiver 3.1A' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'evdev' (string)
input.xkb.variant = 'intl' (string)
linux.device_file = '/dev/input/event4' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0/input/input4/event4' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_04_0_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_04_0' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_04_0_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/usb4/4-0:1.0' (string)
usb.bus_number = 4 (0x4) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0/usb4/4-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 5 (0x5) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:04.0' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_10de_55f'
info.linux.driver = 'ehci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 EHCI USB 2.0 Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_55f' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 32 (0x20) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string)
pci.product = 'MCP67 EHCI USB 2.0 Controller' (string)
pci.product_id = 1375 (0x55f) (int)
pci.subsys_product_id = 1375 (0x55f) (int)
pci.subsys_vendor = 'ASRock Incorporation' (string)
pci.subsys_vendor_id = 6217 (0x1849) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_55f' (string)
info.product = '2.0 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/001/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 6 (0x6) (int)
usb_device.product = '2.0 root hub' (string)
usb_device.product_id = 2 (0x2) (int)
usb_device.serial = '0000:00:02.1' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-0:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 6 (0x6) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 2 (0x2) (int)
usb.serial = '0000:00:02.1' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/pci_10de_55e'
info.linux.driver = 'ohci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 OHCI USB 1.1 Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_55e' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 16 (0x10) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string)
pci.product = 'MCP67 OHCI USB 1.1 Controller' (string)
pci.product_id = 1374 (0x55e) (int)
pci.subsys_product_id = 1374 (0x55e) (int)
pci.subsys_vendor = 'ASRock Incorporation' (string)
pci.subsys_vendor_id = 6217 (0x1849) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_55e' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/003/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb3' (string)
usb_device.bus_number = 3 (0x3) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb3' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 6 (0x6) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:02.0' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb3/3-0:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb3/3-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 6 (0x6) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:02.0' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_10de_543'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 Co-processor' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_543' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.3' (string)
pci.device_class = 11 (0xb) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 64 (0x40) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.3' (string)
pci.product = 'MCP67 Co-processor' (string)
pci.product_id = 1347 (0x543) (int)
pci.subsys_product_id = 1347 (0x543) (int)
pci.subsys_vendor = 'ASRock Incorporation' (string)
pci.subsys_vendor_id = 6217 (0x1849) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_542'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 SMBus' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_542' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 5 (0x5) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.1' (string)
pci.product = 'MCP67 SMBus' (string)
pci.product_id = 1346 (0x542) (int)
pci.subsys_product_id = 1346 (0x542) (int)
pci.subsys_vendor = 'ASRock Incorporation' (string)
pci.subsys_vendor_id = 6217 (0x1849) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_548'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 ISA Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_548' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string)
pci.product = 'MCP67 ISA Bridge' (string)
pci.product_id = 1352 (0x548) (int)
pci.subsys_product_id = 1352 (0x548) (int)
pci.subsys_vendor = 'ASRock Incorporation' (string)
pci.subsys_vendor_id = 6217 (0x1849) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_547'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MCP67 Memory Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_547' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.device_class = 5 (0x5) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.product = 'MCP67 Memory Controller' (string)
pci.product_id = 1351 (0x547) (int)
pci.subsys_product_id = 1351 (0x547) (int)
pci.subsys_vendor = 'ASRock Incorporation' (string)
pci.subsys_vendor_id = 6217 (0x1849) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)

udi = '/org/freedesktop/Hal/devices/fuse'
access_control.file = '/dev/fuse' (string)
access_control.type = 'camera' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'access_control'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_547' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/fuse' (string)

udi = '/org/freedesktop/Hal/devices/kvm'
access_control.file = '/dev/kvm' (string)
access_control.type = 'virt-hardware' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'access_control'} (string list)
info.parent = '/org/freedesktop/Hal/devices/fuse' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/kvm' (string)

Dumped 132 device(s) from the Global Device List.
------------------------------------------------

diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c
index 755baf2..a6b662c 100644
--- a/drivers/acpi/reboot.c
+++ b/drivers/acpi/reboot.c
@@ -15,28 +15,9 @@ void acpi_reboot(void)

rr = &acpi_gbl_FADT.reset_register;

- /*
- * Is the ACPI reset register supported?
- *
- * According to ACPI 3.0, FADT.flags.RESET_REG_SUP indicates
- * whether the ACPI reset mechanism is supported.
- *
- * However, some boxes have this bit clear, yet a valid
- * ACPI_RESET_REG & RESET_VALUE, and ACPI reboot is the only
- * mechanism that works for them after S3.
- *
- * This suggests that other operating systems may not be checking
- * the RESET_REG_SUP bit, and are using other means to decide
- * whether to use the ACPI reboot mechanism or not.
- *
- * So when acpi reboot is requested,
- * only the reset_register is checked. If the following
- * conditions are met, it indicates that the reset register is supported.
- * a. reset_register is not zero
- * b. the access width is eight
- * c. the bit_offset is zero
- */
- if (!(rr->address) || rr->bit_width != 8 || rr->bit_offset != 0)
+ /* Is the reset register supported? */
+ if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) ||
+ rr->bit_width != 8 || rr->bit_offset != 0)
return;

reset_value = acpi_gbl_FADT.reset_value;

Attachment: signature.asc
Description: PGP signature

Next message: Sam Ravnborg: "Re: [PATCH] el3_common_init() should be __devinit, not __init"
Previous message: Sam Ravnborg: "Re: [PATCH] tags: link from CONFIG_x to 'config x' as well"
Next in thread: Simon Arlott: "Re: [Bug 11910] AMD64 reboot regression"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]