Re: Linux 2.6.28-rc2 i/o error on /dev/ttyUSB0

From: Helge Hafting
Date: Thu Oct 30 2008 - 13:09:41 EST

Alan Cox wrote:
On Wed, 29 Oct 2008 13:28:42 +0100
Helge Hafting <helge.hafting@xxxxxxxxxxxxx> wrote:

Alan Cox wrote:
squarely in the "oops, kref's are screwed up" corner, and you should talk to Alan about your particular USB dongle. I bet that bisection would just show you one of the kref commits (eg 4a90f09b "tty: usb-serial krefs" or maybe 7d7b93c14 "tty: kref the tty driver object").

Please try:

tty: Fix USB kref leak


It looks partially fixed.
No more I/O errors, and the gps unit works fine.

But look at the attached dmesg file - there are WARNINGs still.

Helge Hafting

4M num_reg: 2 lose cover RAM: 7M
gran_size: 8M chunk_size: 128M num_reg: 2 lose cover RAM: 7M
gran_size: 8M chunk_size: 256M num_reg: 2 lose cover RAM: 7M
gran_size: 8M chunk_size: 512M num_reg: 2 lose cover RAM: 7M
gran_size: 8M chunk_size: 1G num_reg: 2 lose cover RAM: 7M
gran_size: 8M chunk_size: 2G num_reg: 2 lose cover RAM: 7M
gran_size: 16M chunk_size: 16M num_reg: 7 lose cover RAM: 15M
gran_size: 16M chunk_size: 32M num_reg: 2 lose cover RAM: 15M
gran_size: 16M chunk_size: 64M num_reg: 2 lose cover RAM: 15M
gran_size: 16M chunk_size: 128M num_reg: 2 lose cover RAM: 15M
gran_size: 16M chunk_size: 256M num_reg: 2 lose cover RAM: 15M
gran_size: 16M chunk_size: 512M num_reg: 2 lose cover RAM: 15M
gran_size: 16M chunk_size: 1G num_reg: 2 lose cover RAM: 15M
gran_size: 16M chunk_size: 2G num_reg: 2 lose cover RAM: 15M
gran_size: 32M chunk_size: 32M num_reg: 6 lose cover RAM: 31M
gran_size: 32M chunk_size: 64M num_reg: 2 lose cover RAM: 31M
gran_size: 32M chunk_size: 128M num_reg: 2 lose cover RAM: 31M
gran_size: 32M chunk_size: 256M num_reg: 2 lose cover RAM: 31M
gran_size: 32M chunk_size: 512M num_reg: 2 lose cover RAM: 31M
gran_size: 32M chunk_size: 1G num_reg: 2 lose cover RAM: 31M
gran_size: 32M chunk_size: 2G num_reg: 2 lose cover RAM: 31M
gran_size: 64M chunk_size: 64M num_reg: 5 lose cover RAM: 63M
gran_size: 64M chunk_size: 128M num_reg: 2 lose cover RAM: 63M
gran_size: 64M chunk_size: 256M num_reg: 2 lose cover RAM: 63M
gran_size: 64M chunk_size: 512M num_reg: 2 lose cover RAM: 63M
gran_size: 64M chunk_size: 1G num_reg: 2 lose cover RAM: 63M
gran_size: 64M chunk_size: 2G num_reg: 2 lose cover RAM: 63M
gran_size: 128M chunk_size: 128M num_reg: 4 lose cover RAM: 127M
gran_size: 128M chunk_size: 256M num_reg: 2 lose cover RAM: 127M
gran_size: 128M chunk_size: 512M num_reg: 2 lose cover RAM: 127M
gran_size: 128M chunk_size: 1G num_reg: 2 lose cover RAM: 127M
gran_size: 128M chunk_size: 2G num_reg: 2 lose cover RAM: 127M
gran_size: 256M chunk_size: 256M num_reg: 3 lose cover RAM: 255M
gran_size: 256M chunk_size: 512M num_reg: 2 lose cover RAM: 255M
gran_size: 256M chunk_size: 1G num_reg: 2 lose cover RAM: 255M
gran_size: 256M chunk_size: 2G num_reg: 2 lose cover RAM: 255M
gran_size: 512M chunk_size: 512M num_reg: 2 lose cover RAM: 511M
gran_size: 512M chunk_size: 1G num_reg: 2 lose cover RAM: 511M
gran_size: 512M chunk_size: 2G num_reg: 2 lose cover RAM: 511M
gran_size: 1G chunk_size: 1G num_reg: 1 lose cover RAM: 1023M
gran_size: 1G chunk_size: 2G num_reg: 1 lose cover RAM: 1023M
gran_size: 2G chunk_size: 2G num_reg: 0 lose cover RAM: 2047M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 2 lose RAM: 0G
range0: 0000000000000000 - 0000000080000000
Setting variable MTRR 0, base: 0GB, range: 2GB, type WB
hole: 000000007ff00000 - 0000000080000000
Setting variable MTRR 1, base: 2047MB, range: 1MB, type UC
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 2 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (usable)
modified: 0000000000001000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 0000000000008000 (usable)
modified: 0000000000008000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 0000000000092000 (usable)
modified: 000000000009f000 - 00000000000a0000 (reserved)
modified: 0000000000100000 - 000000007fe5a800 (usable)
modified: 000000007fe5a800 - 0000000080000000 (reserved)
modified: 00000000f8000000 - 00000000fc000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fed18000 - 00000000fed1c000 (reserved)
modified: 00000000fed20000 - 00000000fed90000 (reserved)
modified: 00000000feda0000 - 00000000feda6000 (reserved)
modified: 00000000fee00000 - 00000000fee10000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
init_memory_mapping
0000000000 - 007fe00000 page 2M
007fe00000 - 007fe5a000 page 4k
kernel direct mapping tables up to 7fe5a000 @ 10000-14000
last_map_addr: 7fe5a000 end: 7fe5a000
ACPI: RSDP 000FBB10, 0024 (r2 DELL )
ACPI: XSDT 7FE5D200, 0064 (r1 DELL M08 27D80715 ASL 61)
ACPI: FACP 7FE5D09C, 00F4 (r4 DELL M08 27D80715 ASL 61)
ACPI: DSDT 7FE5D800, 63EA (r2 INT430 SYSFexxx 1001 INTL 20050624)
ACPI: FACS 7FE6C000, 0040
ACPI: HPET 7FE5D300, 0038 (r1 DELL M08 1 ASL 61)
ACPI: APIC 7FE5D400, 0068 (r1 DELL M08 27D80715 ASL 47)
ACPI: ASF! 7FE5D000, 007E (r32 DELL M08 27D80715 ASL 61)
ACPI: MCFG 7FE5D3C0, 003E (r16 DELL M08 27D80715 ASL 61)
ACPI: TCPA 7FE5D700, 0032 (r1 0 ASL 0)
ACPI: SLIC 7FE5D49C, 0176 (r1 DELL M08 27D80715 ASL 61)
ACPI: SSDT 7FE5BA02, 04CC (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: DMI detected: Dell Latitude D830
ACPI: Local APIC address 0xfee00000
(5 early reservations) ==> bootmem [0000000000 - 007fe5a000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000b019f0] TEXT DATA BSS ==> [0000200000 - 0000b019f0]
#3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#4 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000000 -> 0x00000001
0: 0x00000006 -> 0x00000008
0: 0x00000010 -> 0x00000092
0: 0x00000100 -> 0x0007fe5a
On node 0 totalpages: 523743
DMA zone: 56 pages used for memmap
DMA zone: 2407 pages reserved
DMA zone: 1510 pages, LIFO batch:0
DMA32 zone: 7107 pages used for memmap
DMA32 zone: 512663 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 0000000000001000 - 0000000000006000
PM: Registered nosave memory: 0000000000008000 - 0000000000010000
PM: Registered nosave memory: 0000000000092000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
PERCPU: Allocating 57344 bytes of per cpu data
NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514173
Kernel command line: root=/dev/sda2 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 1795.490 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Scanning for low memory corruption every 60 seconds
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2053352k/2095464k available (5043k kernel code, 41232k reserved, 2533k data, 516k init)
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.60 BogoMIPS (lpj=5984966)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20080926
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3592.64 BogoMIPS (lpj=5985028)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (7184.24 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
net_namespace: 1400 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@xxxxxxxxxxxxxxx
ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - B3, should be 57 [20080926]
ACPI: SSDT 7FE6C080, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f]
pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6ffc000-0xf6ffffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f]
pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f]
pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf]
pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7]
pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb]
pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7]
pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb]
pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf6ffb800-0xf6ffbfff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0xf6ffb700-0xf6ffb7ff]
pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff]
pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf2000000-0xf6efffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:0c:00.0: reg 10 32bit mmio: [0xf1fff000-0xf1ffffff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xf1f00000-0xf1ffffff]
pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xf1c00000-0xf1efffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
pci 0000:09:00.0: reg 10 64bit mmio: [0xf1bf0000-0xf1bfffff]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.5: bridge 32bit mmio: [0xf1b00000-0xf1bfffff]
pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:01.4: reg 10 32bit mmio: [0xf1aff000-0xf1afffff]
pci 0000:03:01.4: reg 14 32bit mmio: [0xf1afe800-0xf1afefff]
pci 0000:03:01.4: supports D1 D2
pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.4: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf1a00000-0xf1afffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: WMI: Mapper loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0b: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0b: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0xc80-0xcaf has been reserved
system 00:05: ioport range 0xcc0-0xcff could not be reserved
system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:0b: ioport range 0x900-0x97f has been reserved
system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
system 00:0c: ioport range 0xf400-0xf4fe has been reserved
system 00:0c: ioport range 0x1080-0x10bf has been reserved
system 00:0c: ioport range 0x10c0-0x10df has been reserved
system 00:0c: ioport range 0x809-0x809 has been reserved
system 00:0d: iomem range 0x0-0x9efff could not be reserved
system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xcffff has been reserved
system 00:0d: iomem range 0xe0000-0xfffff has been reserved
system 00:0d: iomem range 0x100000-0x7fe5a7ff could not be reserved
system 00:0d: iomem range 0x7fe5a800-0x7fefffff could not be reserved
system 00:0d: iomem range 0x7ff00000-0x7fffffff could not be reserved
system 00:0d: iomem range 0x7ff00000-0x806fffff could not be reserved
system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved
system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
system 00:0d: iomem range 0xfee00000-0xfee0ffff could not be reserved
system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:0d: iomem range 0xfeda0000-0xfeda3fff could not be reserved
system 00:0d: iomem range 0xfeda4000-0xfeda4fff could not be reserved
system 00:0d: iomem range 0xfeda5000-0xfeda5fff could not be reserved
system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
system 00:0d: iomem range 0xfed18000-0xfed1bfff could not be reserved
system 00:0d: iomem range 0xf8000000-0xfbffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xe000-0xefff
pci 0000:00:01.0: MEM window: 0xf2000000-0xf6efffff
pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0xf1f00000-0xf1ffffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d
pci 0000:00:1c.3: IO window: 0xd000-0xdfff
pci 0000:00:1c.3: MEM window: 0xf1c00000-0xf1efffff
pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
pci 0000:00:1c.5: IO window: disabled
pci 0000:00:1c.5: MEM window: 0xf1b00000-0xf1bfffff
pci 0000:00:1c.5: PREFETCH window: disabled
pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
pci 0000:03:01.0: IO window: 0x002000-0x0020ff
pci 0000:03:01.0: IO window: 0x002400-0x0024ff
pci 0000:03:01.0: PREFETCH window: 0x88000000-0x8bffffff
pci 0000:03:01.0: MEM window: 0x8c000000-0x8fffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: IO window: 0x2000-0x2fff
pci 0000:00:1e.0: MEM window: 0xf1a00000-0xf1afffff
pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:03:01.0: enabling device (0000 -> 0003)
pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
bus: 01 index 0 io port: [0xe000-0xefff]
bus: 01 index 1 mmio: [0xf2000000-0xf6efffff]
bus: 01 index 2 mmio: [0xe0000000-0xefffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 0b index 0 mmio: [0x0-0x0]
bus: 0b index 1 mmio: [0x0-0x0]
bus: 0b index 2 mmio: [0x0-0x0]
bus: 0b index 3 mmio: [0x0-0x0]
bus: 0c index 0 mmio: [0x0-0x0]
bus: 0c index 1 mmio: [0xf1f00000-0xf1ffffff]
bus: 0c index 2 mmio: [0x0-0x0]
bus: 0c index 3 mmio: [0x0-0x0]
bus: 0d index 0 io port: [0xd000-0xdfff]
bus: 0d index 1 mmio: [0xf1c00000-0xf1efffff]
bus: 0d index 2 mmio: [0xf0000000-0xf01fffff]
bus: 0d index 3 mmio: [0x0-0x0]
bus: 09 index 0 mmio: [0x0-0x0]
bus: 09 index 1 mmio: [0xf1b00000-0xf1bfffff]
bus: 09 index 2 mmio: [0x0-0x0]
bus: 09 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0x2000-0x2fff]
bus: 03 index 1 mmio: [0xf1a00000-0xf1afffff]
bus: 03 index 2 mmio: [0x88000000-0x8bffffff]
bus: 03 index 3 io port: [0x00-0xffff]
bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff]
bus: 04 index 0 io port: [0x2000-0x20ff]
bus: 04 index 1 io port: [0x2400-0x24ff]
bus: 04 index 2 mmio: [0x88000000-0x8bffffff]
bus: 04 index 3 mmio: [0x8c000000-0x8fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
NET: Registered protocol family 1
Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx> <peter.oruba@xxxxxxx>
audit: initializing netlink socket (disabled)
type=2000 audit(1225384324.514:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.10)
msgmni has been set to 4011
alg: No test for stdrng (krng)
alg: No test for stdrng (ansi_cprng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080
pci 0000:00:1a.0: Performing full reset
pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080
pci 0000:00:1a.1: Performing full reset
pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080
pci 0000:00:1d.0: Performing full reset
pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080
pci 0000:00:1d.1: Performing full reset
pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080
pci 0000:00:1d.2: Performing full reset
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pcieport-driver 0000:00:01.0: irq 319 for MSI/MSI-X
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie02: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pcieport-driver 0000:00:1c.0: irq 318 for MSI/MSI-X
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pcieport-driver 0000:00:1c.1: irq 317 for MSI/MSI-X
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pcieport-driver 0000:00:1c.3: irq 316 for MSI/MSI-X
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
pci_express 0000:00:1c.3:pcie03: allocate port service
pcieport-driver 0000:00:1c.5: setting latency timer to 64
pcieport-driver 0000:00:1c.5: found MSI capability
pcieport-driver 0000:00:1c.5: irq 315 for MSI/MSI-X
pci_express 0000:00:1c.5:pcie00: allocate port service
pci_express 0000:00:1c.5:pcie02: allocate port service
pci_express 0000:00:1c.5:pcie03: allocate port service
nvidiafb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidiafb: Device ID: 10de042b
nvidiafb: unknown NV_ARCH
ACPI: AC Adapter [AC] (on-line)
ACPI Warning (nspredef-0858): \_SB_.BAT0._BIF: Return Package type mismatch at index 9 - found Buffer, expected String [20080926]
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button (CM) [SBTN]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:31/device:32/input/input3
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:37/input/input4
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
ACPI Warning (nspredef-0357): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20080926]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3c/input/input5
ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
ACPI: SSDT 7FE5C538, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT 7FE5BECE, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FE5C77C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
ACPI: SSDT 7FE5C4B3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (58 C)
i8k: unable to get SMM BIOS version
Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@xxxxxxxxxx)
Linux agpgart interface v0.103
ipmi message handler version 39.2
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
Ethernet Channel Bonding Driver: v3.3.0 (June 10, 2008)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
tg3.c:v3.94 (August 14, 2008)
tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:09:00.0: setting latency timer to 64
eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:1c:23:9f:6f:17
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
iwl3945: Copyright(c) 2003-2008 Intel Corporation
iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:0c:00.0: setting latency timer to 64
iwl3945: Detected Intel Wireless WiFi Link 3945ABG
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
phy0: Selected rate control algorithm 'iwl-3945-rs'
iwl3945 0000:0c:00.0: PCI INT A disabled
console [netcon0] enabled
netconsole: network logging started
Linux video capture interface: v2.00
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x02)
pci 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
piix 0000:00:1f.1: IDE port disabled
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x6fa0-0x6fa7
Probing IDE interface ide0...
hda: TSSTcorp DVD+/-RW TS-L632D, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ahci 0000:00:1f.2: irq 314 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 314
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 314
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Hitachi HTS722080K9A300, DCBOC54P, max UDMA/133
ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata3: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72208 DCBO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
firewire_ohci 0000:03:01.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19
firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI version 1.10
yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01fe]
yenta_cardbus 0000:03:01.0: O2: res at 0x94/0xD4: 00/ea
yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst
yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
yenta_cardbus 0000:03:01.0: Socket status: 30000006
pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xf1a00000 - 0xf1afffff
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1a.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: supports USB remote wakeup
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: default language 0x0409
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.28-rc2-hh1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: default language 0x0409
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 20ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.28-rc2-hh1 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1a.0: Performing full reset
uhci_hcd 0000:00:1a.0: supports USB remote wakeup
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
usb usb3: default language 0x0409
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
drivers/usb/core/inode.c: creating file '004'
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1a.1: Performing full reset
uhci_hcd 0000:00:1a.1: supports USB remote wakeup
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
usb usb4: default language 0x0409
usb usb4: uevent
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
drivers/usb/core/inode.c: creating file '005'
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
uhci_hcd 0000:00:1d.0: supports USB remote wakeup
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
usb usb5: default language 0x0409
usb usb5: uevent
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: uevent
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: individual port over-current protection
hub 5-0:1.0: power on to power good time: 2ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
drivers/usb/core/inode.c: creating file '006'
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.1: supports USB remote wakeup
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
usb usb6: default language 0x0409
usb usb6: uevent
usb usb6: usb_probe_device
usb usb6: configuration #1 chosen from 1 choice
usb usb6: adding 6-0:1.0 (config #1, interface 0)
usb 6-0:1.0: uevent
hub 6-0:1.0: usb_probe_interface
hub 6-0:1.0: usb_probe_interface - got id
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
hub 6-0:1.0: standalone hub
hub 6-0:1.0: no power switching (usb 1.0)
hub 6-0:1.0: individual port over-current protection
hub 6-0:1.0: power on to power good time: 2ms
hub 6-0:1.0: local power source is good
hub 6-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
drivers/usb/core/inode.c: creating file '007'
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
uhci_hcd 0000:00:1d.2: supports USB remote wakeup
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
usb usb7: default language 0x0409
usb usb7: uevent
usb usb7: usb_probe_device
usb usb7: configuration #1 chosen from 1 choice
usb usb7: adding 7-0:1.0 (config #1, interface 0)
usb 7-0:1.0: uevent
hub 7-0:1.0: usb_probe_interface
hub 7-0:1.0: usb_probe_interface - got id
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
hub 7-0:1.0: standalone hub
hub 7-0:1.0: no power switching (usb 1.0)
hub 7-0:1.0: individual port over-current protection
hub 7-0:1.0: power on to power good time: 2ms
hub 7-0:1.0: local power source is good
hub 7-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.28-rc2-hh1 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usbcore: registered new interface driver wusb-cbaf
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, , hpet irqs irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
cpuidle: using governor ladder
cpuidle: using governor menu
Marking TSC unstable due to TSC halts in idle
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
Driver for HIFN 795x crypto accelerator chip has been successfully registered.
dca service started, version 1.4
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2: status 0501 change 0001
ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
hub 2-0:1.0: port 5: status 0501 change 0001
uhci_hcd 0000:00:1a.0: port 2 portsc 008a,00
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
uhci_hcd 0000:00:1d.2: port 1 portsc 008a,00
hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 2-0:1.0: state 7 ports 6 chg 0020 evt 0000
hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
firewire_core: created device fw0: GUID 464fc0000e451870, S400
usb usb4: suspend_rh (auto-stop)
usb usb5: suspend_rh (auto-stop)
usb usb6: suspend_rh (auto-stop)
usb usb3: suspend_rh (auto-stop)
usb usb7: suspend_rh (auto-stop)
hub 4-0:1.0: hub_suspend
usb usb4: bus auto-suspend
usb usb4: suspend_rh
hub 5-0:1.0: hub_suspend
usb usb5: bus auto-suspend
usb usb5: suspend_rh
hub 6-0:1.0: hub_suspend
usb usb6: bus auto-suspend
usb usb6: suspend_rh
Clocksource tsc unstable (delta = -38712966487 ns)
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend
ehci_hcd 0000:00:1a.7: suspend root hub
ehci_hcd 0000:00:1d.7: port 5 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT
hub 2-0:1.0: port 5 not reset yet, waiting 50ms
usb usb7: wakeup_rh (auto-start)
ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0002
uhci_hcd 0000:00:1d.2: port 1 portsc 0093,00
hub 7-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
ALSA device list:
#0: HDA Intel at 0xf6ffc000 irq 21
NET: Registered protocol family 26
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP bic registered
TCP westwood registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tunl0: Disabled Privacy Extensions
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
NET: Registered protocol family 35
802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx>
All bugs added by David S. Miller <davem@xxxxxxxxxx>
CCID: Registered CCID 2 (TCP-like)
SCTP: Hash tables configured (established 65536 bind 65536)
TIPC: Activated (version 1.6.4 compiled Oct 27 2008 12:45:44)
NET: Registered protocol family 30
TIPC: Started in single node mode
rtc_cmos 00:03: setting system clock to 2008-10-30 16:32:53 UTC (1225384373)
hub 7-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 7-1: new full speed USB device using uhci_hcd and address 2
usb 7-1: ep0 maxpacket = 8
usb 7-1: uevent
usb 7-1: usb_probe_device
usb 7-1: configuration #1 chosen from 1 choice
usb 7-1: adding 7-1:1.0 (config #1, interface 0)
usb 7-1:1.0: uevent
hub 7-1:1.0: usb_probe_interface
hub 7-1:1.0: usb_probe_interface - got id
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 4 ports detected
hub 7-1:1.0: compound device; port removable status: RFRR
hub 7-1:1.0: individual port power switching
hub 7-1:1.0: individual port over-current protection
hub 7-1:1.0: power on to power good time: 100ms
hub 7-1:1.0: local power source is lost (inactive)
hub 7-1:1.0: enabling power on all ports
drivers/usb/core/inode.c: creating file '002'
usb 7-1: New USB device found, idVendor=0b97, idProduct=7761
usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0020
hub 7-1:1.0: port 2: status 0101 change 0001
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 128, phase 0, 12 us
hub 7-1:1.0: state 7 ports 4 chg 0004 evt 0000
hub 7-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
usb 7-1.2: new full speed USB device using uhci_hcd and address 3
usb 7-1.2: skipped 1 descriptor after endpoint
usb 7-1.2: default language 0x0409
usb 7-1.2: uevent
usb 7-1.2: usb_probe_device
usb 7-1.2: configuration #1 chosen from 1 choice
usb 7-1.2: adding 7-1.2:1.0 (config #1, interface 0)
usb 7-1.2:1.0: uevent
drivers/usb/core/inode.c: creating file '003'
usb 7-1.2: New USB device found, idVendor=0b97, idProduct=7772
usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1.2: Product: O2Micro CCID SC Reader
usb 7-1.2: Manufacturer: O2
hub 7-1:1.0: state 7 ports 4 chg 0000 evt 0004
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 516k freed
Write protecting the kernel read-only data: 6824k
usb usb3: uevent
usb 3-0:1.0: uevent
usb usb4: uevent
usb 4-0:1.0: uevent
usb usb1: uevent
usb 1-0:1.0: uevent
usb usb5: uevent
usb 5-0:1.0: uevent
usb usb6: uevent
usb 6-0:1.0: uevent
usb usb7: uevent
usb 7-0:1.0: uevent
usb 7-1: uevent
usb 7-1.2: uevent
usb 7-1.2:1.0: uevent
usb 7-1:1.0: uevent
usb usb2: uevent
usb 2-0:1.0: uevent
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
usb usb3: suspend_rh
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
ehci_hcd 0000:00:1d.7: suspend root hub
loadkeys[1931]: segfault at 5a0 ip 00007f6c205a4af9 sp 00007fff28dd5be8 error 4 in libconsole.so.0.0.0[7f6c20592000+19000]
Adding 3903752k swap on /dev/sda7. Priority:-1 extents:1 across:3903752k
EXT3 FS on sda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level CPU
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level CPU
groups: 0-1
drm: disagrees about version of symbol struct_module
nouveau: disagrees about version of symbol struct_module
iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
iwl3945 0000:0c:00.0: irq 313 for MSI/MSI-X
iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-1.ucode
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:09:00.0: irq 312 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
warning: `ntpd' uses 32-bit capabilities (legacy support in use)
wlan0: authenticate with AP 00:14:1b:5a:13:40
wlan0: authenticated
wlan0: associate with AP 00:14:1b:5a:13:40
wlan0: RX AssocResp from 00:14:1b:5a:13:40 (capab=0x431 status=0 aid=240)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
mtrr: base(0xe0000000) is not aligned on a size(0x7f00000) boundary
wlan0: no IPv6 routers present
usb usb2: usb resume
ehci_hcd 0000:00:1d.7: resume root hub
hub 2-0:1.0: hub_resume
ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 2-0:1.0: port 1: status 0501 change 0001
hub 2-0:1.0: state 7 ports 6 chg 0002 evt 0000
hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1d.7: port 1 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT
hub 2-0:1.0: port 1 not reset yet, waiting 50ms
usb usb5: usb resume
usb usb5: wakeup_rh
hub 5-0:1.0: hub_resume
uhci_hcd 0000:00:1d.0: port 1 portsc 0093,00
hub 5-0:1.0: port 1: status 0101 change 0001
ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002
hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000
hub 5-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: default language 0x0409
usb 5-1: uevent
usb 5-1: usb_probe_device
usb 5-1: configuration #1 chosen from 1 choice
usb 5-1: adding 5-1:1.0 (config #1, interface 0)
usb 5-1:1.0: uevent
drivers/usb/core/inode.c: creating file '002'
usb 5-1: New USB device found, idVendor=067b, idProduct=2303
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB-Serial Controller
usb 5-1: Manufacturer: Prolific Technology Inc.
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbserial_generic 7-1.2:1.0: usb_probe_interface
usbserial_generic 7-1.2:1.0: usb_probe_interface - got id
usbserial_generic 5-1:1.0: usb_probe_interface
usbserial_generic 5-1:1.0: usb_probe_interface - got id
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for pl2303
pl2303 5-1:1.0: usb_probe_interface
pl2303 5-1:1.0: usb_probe_interface - got id
pl2303 5-1:1.0: pl2303 converter detected
usb 5-1: pl2303 converter now attached to ttyUSB0
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
ehci_hcd 0000:00:1d.7: suspend root hub
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 19 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 19 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 19 us
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 19 us
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 19 us
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:326 serial_write_room+0x53/0x6a [usbserial]()
Modules linked in: pl2303 usbserial pcmcia intel_agp
Pid: 10, comm: events/1 Not tainted 2.6.28-rc2-hh1 #13
Call Trace:
[<ffffffff802418b9>] warn_on_slowpath+0x51/0x75
[<ffffffff8023abff>] check_preempt_wakeup+0xc5/0xfa
[<ffffffff8023bf7c>] try_to_wake_up+0x1b4/0x1c6
[<ffffffffa002229b>] pl2303_send+0x4c/0x209 [pl2303]
[<ffffffff80235bee>] __wake_up_common+0x46/0x76
[<ffffffffa001757d>] serial_write_room+0x53/0x6a [usbserial]
[<ffffffff806e9311>] _spin_lock_irqsave+0x24/0x2c
[<ffffffff8041835f>] opost+0x12/0x1bf
[<ffffffff80419985>] n_tty_receive_buf+0x2ca/0xd6b
[<ffffffff8020f77e>] __switch_to+0xb4/0x3fe
[<ffffffff80237b5b>] dequeue_task_fair+0x26/0x77
[<ffffffff80237608>] __dequeue_entity+0x25/0x68
[<ffffffff80229661>] default_spin_lock_flags+0x5/0x8
[<ffffffff806e9311>] _spin_lock_irqsave+0x24/0x2c
[<ffffffff8041bffe>] flush_to_ldisc+0x120/0x1cd
[<ffffffff8041bede>] flush_to_ldisc+0x0/0x1cd
[<ffffffff8025092a>] run_workqueue+0x96/0x130
[<ffffffff806e9311>] _spin_lock_irqsave+0x24/0x2c
[<ffffffff80250a9c>] worker_thread+0xd8/0xe7
[<ffffffff80253ea4>] autoremove_wake_function+0x0/0x2e
uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 1, phase 0, 19 us
[<ffffffff802509c4>] worker_thread+0x0/0xe7
[<ffffffff80253b43>] kthread+0x47/0x73
[<ffffffff8023f35c>] schedule_tail+0x27/0x5f
[<ffffffff802122a9>] child_rip+0xa/0x11
[<ffffffff80253afc>] kthread+0x0/0x73
[<ffffffff8021229f>] child_rip+0x0/0x11
---[ end trace 99a05ea818349004 ]---
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:313 serial_write+0x79/0x9d [usbserial]()
Modules linked in: pl2303 usbserial pcmcia intel_agp
Pid: 10, comm: events/1 Tainted: G W 2.6.28-rc2-hh1 #13
Call Trace:
[<ffffffff802418b9>] warn_on_slowpath+0x51/0x75
[<ffffffff8023abff>] check_preempt_wakeup+0xc5/0xfa
[<ffffffff8023bf7c>] try_to_wake_up+0x1b4/0x1c6
[<ffffffffa002229b>] pl2303_send+0x4c/0x209 [pl2303]
[<ffffffff80235bee>] __wake_up_common+0x46/0x76
[<ffffffffa001760d>] serial_write+0x79/0x9d [usbserial]
[<ffffffff806e9311>] _spin_lock_irqsave+0x24/0x2c
[<ffffffff804151f0>] tty_put_char+0x2b/0x2d
[<ffffffff804184f8>] opost+0x1ab/0x1bf
[<ffffffff80419985>] n_tty_receive_buf+0x2ca/0xd6b
[<ffffffff8020f77e>] __switch_to+0xb4/0x3fe
[<ffffffff80237b5b>] dequeue_task_fair+0x26/0x77
[<ffffffff80237608>] __dequeue_entity+0x25/0x68
[<ffffffff80229661>] default_spin_lock_flags+0x5/0x8
[<ffffffff806e9311>] _spin_lock_irqsave+0x24/0x2c
[<ffffffff8041bffe>] flush_to_ldisc+0x120/0x1cd
[<ffffffff8041bede>] flush_to_ldisc+0x0/0x1cd
[<ffffffff8025092a>] run_workqueue+0x96/0x130
[<ffffffff806e9311>] _spin_lock_irqsave+0x24/0x2c
[<ffffffff80250a9c>] worker_thread+0xd8/0xe7
[<ffffffff80253ea4>] autoremove_wake_function+0x0/0x2e
[<ffffffff802509c4>] worker_thread+0x0/0xe7
[<ffffffff80253b43>] kthread+0x47/0x73
[<ffffffff8023f35c>] schedule_tail+0x27/0x5f
[<ffffffff802122a9>] child_rip+0xa/0x11
[<ffffffff80253afc>] kthread+0x0/0x73
[<ffffffff8021229f>] child_rip+0x0/0x11
---[ end trace 99a05ea818349004 ]---
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:326 serial_write_room+0x53/0x6a [usbserial]()
Modules linked in: pl2303 usbserial pcmcia intel_agp
Pid: 10, comm: events/1 Tainted: G W 2.6.28-rc2-hh1 #13
Call Trace:
[<ffffffff802418b9>] warn_on_slowpath+0x51/0x75
[<ffffffff80237217>] __wake_up+0x38/0x4f
[<ffffffff80251217>] __queue_work+0x60/0x6f
[<ffffffff8025129e>] queue_work_on+0x42/0x4c
[<ffffffffa00226bd>] pl2303_write+0xf5/0x102 [pl2303]
[<ffffffffa001760d>] serial_write+0x79/0x9d [usbserial]
[<ffffffffa001757d>] serial_write_room+0x53/0x6a [usbserial]
[<ffffffff806e9311>] _spin_lock_irqsave+0x24/0x2c
[<ffffffff8041835f>] opost+0x12/0x1bf
[<ffffffff80419985>] n_tty_receive_buf+0x2ca/0xd6b
[<ffffffff8020f77e>] __switch_to+0xb4/0x3fe
[<ffffffff80237b5b>] dequeue_task_fair+0x26/0x77
[<ffffffff80237608>] __dequeue_entity+0x25/0x68
[<ffffffff80229661>] default_spin_lock_flags+0x5/0x8
[<ffffffff806e9311>] _spin_lock_irqsave+0x24/0x2c
[<ffffffff8041bffe>] flush_to_ldisc+0x120/0x1cd
[<ffffffff8041bede>] flush_to_ldisc+0x0/0x1cd
[<ffffffff8025092a>] run_workqueue+0x96/0x130
[<ffffffff806e9311>] _spin_lock_irqsave+0x24/0x2c
[<ffffffff80250a9c>] worker_thread+0xd8/0xe7
[<ffffffff80253ea4>] autoremove_wake_function+0x0/0x2e
[<ffffffff802509c4>] worker_thread+0x0/0xe7
[<ffffffff80253b43>] kthread+0x47/0x73
[<ffffffff8023f35c>] schedule_tail+0x27/0x5f
[<ffffffff802122a9>] child_rip+0xa/0x11
[<ffffffff80253afc>] kthread+0x0/0x73
[<ffffffff8021229f>] child_rip+0x0/0x11
---[ end trace 99a05ea818349004 ]---
------------[ cut here ]------------
WARNING: at drivers/usb/serial/usb-serial.c:313 serial_write+0x79/0x9d [usbserial]()
Modules linked in: pl2303 usbserial pcmcia intel_agp
Pid: 10, comm: events/1 Tainted: G W 2.6.28-rc2-hh1 #13
Call Trace:
[<ffffffff802418b9>] warn_on_slowpath+0x51/0x75
[<ffffffff80237217>] __wake_up+0x38/0x4f
[<ffffffff80251217>] __queue_work+0x60/0x6f
[<ffffffff8025129e>] queue_work_on+0x42/0x4c
[<ffffffffa001760d>] serial_write+0x79/0x9d [usbserial]
[<ffffffff806e9311>] _spin_lock_irqsave+0x24/0x2c
[<ffffffff804151f0>] tty_put_char+0x2b/0x2d
[<ffffffff804184f8>] opost+0x1ab/0x1bf
[<ffffffff80419985>] n_tty_receive_buf+0x2ca/0xd6b
[<ffffffff8020f77e>] __switch_to+0xb4/0x3fe
[<ffffffff80237b5b>] dequeue_task_fair+0x26/0x77
[<ffffffff80237608>] __dequeue_entity+0x25/0x68
[<ffffffff80229661>] default_spin_lock_flags+0x5/0x8
[<ffffffff806e9311>] _spin_lock_irqsave+0x24/0x2c
[<ffffffff8041bffe>] flush_to_ldisc+0x120/0x1cd
[<ffffffff8041bede>] flush_to_ldisc+0x0/0x1cd
[<ffffffff8025092a>] run_workqueue+0x96/0x130
[<ffffffff806e9311>] _spin_lock_irqsave+0x24/0x2c
[<ffffffff80250a9c>] worker_thread+0xd8/0xe7
[<ffffffff80253ea4>] autoremove_wake_function+0x0/0x2e
[<ffffffff802509c4>] worker_thread+0x0/0xe7
[<ffffffff80253b43>] kthread+0x47/0x73
[<ffffffff8023f35c>] schedule_tail+0x27/0x5f
[<ffffffff802122a9>] child_rip+0xa/0x11
[<ffffffff80253afc>] kthread+0x0/0x73
[<ffffffff8021229f>] child_rip+0x0/0x11
---[ end trace 99a05ea818349004 ]---
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 1, phase 0, 19 us