Re: tg3:No interrupt was generated using MSI, switching to INTx mode.Please report this failure to the PCI maintainer and include system chipsetinformation.

[Robert Hancock]

Marc Donner wrote:
> Hi @all,
>
> we have installed a dual port Brodcam Gigabit Ethernet NIC, and get the
> following error in dmesg:
>
> tg3: eth1 No interrupt was generated using MSI, switching to INTx mode.
> Please report this failure to the PCI maintainer and include system
> chipset information.
>
> Who is responsible for this error message? We are using Kernel 2.6.21.1
> and the NIC Chipset is a Broadcom BCM5715CKPBG

Please post your full dmesg output from bootup, lspci -vvv output and 
what kind of motherboard or system you're using.

Also it would be useful to test a newer kernel to see if the problem 
still occurs. 2.6.21 is quite old these days.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/