UIO: don't check irq_enabled flag in uio_cif irq handler

[Manuel Traut]

Below patch ignores INT1_ENABLED flag in the uio_cif irq handler.

On a Hilscher DeviceNet Slave card, the INT_ENABLE flag is (probably) reseted 
by the firmware. Without this patch, every interrupt produced by this card is
dropped.

This patch is tested and works with a DeviceNet Slave and a Profibus Slave card.

Signed-off-by: Manuel Traut <manut@xxxxxxxxxxxxx>

--- linux-git/drivers/uio/uio_cif.c	2008-10-28 23:42:18.000000000 +0100
+++ uio/drivers/uio/uio_cif.c	2008-10-28 23:41:43.000000000 +0100
@@ -18,7 +18,6 @@
 #define PLX9030_INTCSR		0x4C
 #define INTSCR_INT1_ENABLE	0x01
 #define INTSCR_INT1_STATUS	0x04
-#define INT1_ENABLED_AND_ACTIVE	(INTSCR_INT1_ENABLE | INTSCR_INT1_STATUS)
 
 #define PCI_SUBVENDOR_ID_PEP	0x1518
 #define CIF_SUBDEVICE_PROFIBUS	0x430
@@ -30,8 +29,8 @@
 	void __iomem *plx_intscr = dev_info->mem[0].internal_addr
 					+ PLX9030_INTCSR;
 
-	if ((ioread8(plx_intscr) & INT1_ENABLED_AND_ACTIVE)
-	    != INT1_ENABLED_AND_ACTIVE)
+	if ((ioread8(plx_intscr) & INT1_STATUS)
+	    != INT1_STATUS)
 		return IRQ_NONE;
 
 	/* Disable interrupt */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/