Re: Linux 2.6.28-rc2 i/o error on /dev/ttyUSB0

[Helge Hafting]

I have gps unit connected via USB-serial (pl2303).
This does not work with 2.6.28-rc2

udev creates devices as usual, but /dev/ttyUSB0 fail.
cat /dev/ttyUSB0 gives i/o errors, for example.

gpsd try several times, and then fall back on opening
in read-only mode. This works, but gpsd doesn't actually
get any data at all from the unit.

The pc is a core2duo laptop, using a 64-bit smp kernel.

2.6.27 is fine. I skipped 2.6.28-rc1 due to known breakage.
I can test it if that might help.

Helge Hafting
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/