Re: [patch 2.6.27-git] spi_gpio driver

[Magnus Damm]

On Mon, Oct 20, 2008 at 1:24 PM, David Brownell <david-b@xxxxxxxxxxx> wrote:
> From: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
>
> Generalize the old at91rm9200 "bootstrap" bitbanging SPI master driver
> as "spi_gpio", so it works with arbitrary GPIOs and can be configured
> through platform_data.  Such SPI masters support:
>
>  - any number of bus instances (bus_num is the platform_device.id)
>  - any number of chipselects (one GPIO per spi_device)
>  - all four SPI_MODE values, and SPI_CS_HIGH
>  - i/o word sizes from 1 to 32 bits;
>  - devices configured as with any other spi_master controller
>
> When configured using platform_data, this provides relatively low clock
> rates.  On platforms that support inlined GPIO calls, significantly
> improved transfer speeds are also possible with a semi-custom driver.
> (It's still painful when accessing flash memory, but less so.)
>
> Sanity checked by using this version to replace both native controllers
> on a board with six different SPI slaves, relying on three different
> SPI_MODE_* values and both SPI_CS_HIGH settings for correct operation.
>
> Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>

Works fine on SuperH together with the mmc_spi driver. Thanks!

Acked-by: Magnus Damm <damm@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/