Re: [Bugme-new] [Bug 11543] New: kernel panic: softlockup intick_periodic() ???
From: j_kernel
Date: Tue Sep 16 2008 - 22:43:30 EST
In-Reply-To: <20080916175629.GE7187@lenovo>
On Tue, Sep 16, 2008 at 09:56:29PM +0400, Cyrill Gorcunov wrote:
> [Thomas Gleixner - Tue, Sep 16, 2008 at 07:14:40AM -0700]
> | Can you try nmi_watchdog=2 ?
> |
> | Thanks,
> |
> | tglx
> |
>
> And get apic=debug a try too please. I remember there
> was a problem with SB600 on ACPI side (but they should
> be already fixed)
Attached is the updated dmesg from adding the nmi_watchdog=2 and acpi=debug boot params.
-J
--
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.27-rc5-22033-gd26acd9-dirty (root@ipp000) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #2 SMP Fri Sep 12 10:04:18 HST 2008
[ 0.000000] Command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc nmi_watchdog=2 show_msr=1 apic=debug console=tty0 console=ttyS0,115200n8
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff60000 (usable)
[ 0.000000] BIOS-e820: 00000000cff60000 - 00000000cff6a000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff6a000 - 00000000cff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x3ffffffff
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xcff60 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff60000 page 4k
[ 0.000000] kernel direct mapping tables up to cff60000 @ 8000-e000
[ 0.000000] last_map_addr: cff60000 end: cff60000
[ 0.000000] init_memory_mapping
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ c000-16000
[ 0.000000] last_map_addr: 230000000 end: 230000000
[ 0.000000] RAMDISK: 37e0f000 - 37fef850
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F75D0, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT CFF656FA, 0064 (r1 PTLTD XSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP CFF6970E, 00F4 (r3 NVIDIA CK8S 6040000 PTL_ F4240)
[ 0.000000] ACPI: DSDT CFF6575E, 3F3C (r1 NVIDIA CK8 6040000 MSFT 3000000)
[ 0.000000] ACPI: FACS CFF6AFC0, 0040
[ 0.000000] ACPI: SSDT CFF69802, 0574 (r1 AMD POWERNOW 6040000 AMD 1)
[ 0.000000] ACPI: SRAT CFF69D76, 0110 (r1 AMD HAMMER 6040000 AMD 1)
[ 0.000000] ACPI: SPCR CFF69E86, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
[ 0.000000] ACPI: MCFG CFF69ED6, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: HPET CFF69F12, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
[ 0.000000] ACPI: APIC CFF69F4A, 008E (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT CFF69FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-130000000
[ 0.000000] SRAT: Node 1 PXM 1 130000000-230000000
[ 0.000000] NUMA: Allocated memnodemap from 11000 - 15680
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [0000000000015680 - 000000000002067f]
[ 0.000000] bootmap [0000000000021000 - 0000000000046fff] pages 26
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000f96910] TEXT DATA BSS ==> [0000200000 - 0000f96910]
[ 0.000000] #3 [0037e0f000 - 0037fef850] RAMDISK ==> [0037e0f000 - 0037fef850]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
[ 0.000000] #6 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
[ 0.000000] #7 [0000011000 - 0000015680] MEMNODEMAP ==> [0000011000 - 0000015680]
[ 0.000000] Bootmem setup node 1 0000000130000000-0000000230000000
[ 0.000000] NODE_DATA [0000000130000000 - 000000013000afff]
[ 0.000000] bootmap [000000013000b000 - 000000013002afff] pages 20
[ 0.000000] (8 early reservations) ==> bootmem [0130000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0000200000 - 0000f96910] TEXT DATA BSS
[ 0.000000] #3 [0037e0f000 - 0037fef850] RAMDISK
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved
[ 0.000000] #5 [0000008000 - 000000c000] PGTABLE
[ 0.000000] #6 [000000c000 - 0000011000] PGTABLE
[ 0.000000] #7 [0000011000 - 0000015680] MEMNODEMAP
[ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes.
[ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [ffff8800000f7600] 000f7600
[ 0.000000] [ffffe20000000000-ffffe200071fffff] PMD -> [ffff880028200000-ffff88002e1fffff] on node 0
[ 0.000000] [ffffe20007200000-ffffe2000d1fffff] PMD -> [ffff880130200000-ffff8801361fffff] on node 1
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000cff60
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] 1: 0x00130000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 1048317
[ 0.000000] DMA zone: 307 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 823232 pages, LIFO batch:31
[ 0.000000] Normal zone: 192000 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 1048576
[ 0.000000] Normal zone: 1024000 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000)
[ 0.000000] mapped IOAPIC to ffffffffff5fb000 (00000000fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff60000 - 00000000cff6a000
[ 0.000000] PM: Registered nosave memory: 00000000cff6a000 - 00000000cff80000
[ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
[ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
[ 0.000000] PERCPU: Allocating 51872 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 2
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 2039539
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/sda3 init=/linuxrc nmi_watchdog=2 show_msr=1 apic=debug console=tty0 console=ttyS0,115200n8
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 2799.937 MHz processor.
[ 0.003333] spurious 8259A interrupt: IRQ7.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] console [ttyS0] enabled
[ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.003333] ... MAX_LOCK_DEPTH: 48
[ 0.003333] ... MAX_LOCKDEP_KEYS: 8191
[ 0.003333] ... CLASSHASH_SIZE: 4096
[ 0.003333] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.003333] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.003333] ... CHAINHASH_SIZE: 8192
[ 0.003333] memory used by lock dependency info: 3839 kB
[ 0.003333] per task-struct memory footprint: 1920 bytes
[ 0.003333] Checking aperture...
[ 0.003333] No AGP bridge found
[ 0.003333] Node 0: aperture @ 0 size 32 MB
[ 0.003333] Your BIOS doesn't leave a aperture memory hole
[ 0.003333] Please enable the IOMMU option in the BIOS setup
[ 0.003333] This costs you 64 MB of RAM
[ 0.003333] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.003333] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.003333] Memory: 8108304k/9175040k available (3897k kernel code, 279268k reserved, 2242k data, 676k init)
[ 0.003333] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.003333] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
[ 0.003333] hpet clockevent registered
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5602.20 BogoMIPS (lpj=9333123)
[ 0.006694] Security Framework initialized
[ 0.010741] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.019180] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.025703] Mount-cache hash table entries: 256
[ 0.026977] Initializing cgroup subsys ns
[ 0.030005] Initializing cgroup subsys cpuacct
[ 0.033335] Initializing cgroup subsys memory
[ 0.036674] Initializing cgroup subsys devices
[ 0.040006] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.043332] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.046666] CPU 0/0 -> Node 0
[ 0.049999] tseg: 00cff80000
[ 0.050000] CPU: Physical Processor ID: 0
[ 0.053331] CPU: Processor Core ID: 0
[ 0.056670] using C1E aware idle routine
[ 0.060018] ACPI: Core revision 20080609
[ 0.070057] Getting VERSION: 80050010
[ 0.073331] Getting VERSION: 80050010
[ 0.076663] Getting ID: 0
[ 0.079466] Getting ID: ff000000
[ 0.079994] Getting LVT0: 10000
[ 0.079997] Getting LVT1: 10000
[ 0.083331] masked ExtINT on CPU#0
[ 0.086902] ENABLING IO-APIC IRQs
[ 0.089996] init IO_APIC IRQs
[ 0.089997] IO-APIC (apicid-pin) 4-0 not connected.
[ 0.090004] IOAPIC[0]: Set routing entry (4-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[ 0.090011] IOAPIC[0]: Set routing entry (4-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
[ 0.090018] IOAPIC[0]: Set routing entry (4-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
[ 0.090024] IOAPIC[0]: Set routing entry (4-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[ 0.090031] IOAPIC[0]: Set routing entry (4-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
[ 0.090037] IOAPIC[0]: Set routing entry (4-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
[ 0.090044] IOAPIC[0]: Set routing entry (4-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[ 0.090050] IOAPIC[0]: Set routing entry (4-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[ 0.090057] IOAPIC[0]: Set routing entry (4-9 -> 0x39 -> IRQ 9 Mode:1 Active:1)
[ 0.090064] IOAPIC[0]: Set routing entry (4-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
[ 0.090070] IOAPIC[0]: Set routing entry (4-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
[ 0.090077] IOAPIC[0]: Set routing entry (4-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[ 0.090083] IOAPIC[0]: Set routing entry (4-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[ 0.090090] IOAPIC[0]: Set routing entry (4-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
[ 0.090096] IOAPIC[0]: Set routing entry (4-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
[ 0.090102] IO-APIC (apicid-pin) 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23 not connected.
[ 0.090269] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.128401] CPU0: Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
[ 0.134745] Using local APIC timer interrupts.
[ 0.139992] APIC timer calibration result 12499723
[ 0.139993] Detected 12.499 MHz APIC timer.
[ 0.143480] lockdep: fixing up alternatives.
[ 0.146682] Booting processor 1/1 ip 6000
[ 0.003333] Initializing CPU#1
[ 0.003333] masked ExtINT on CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 5602.22 BogoMIPS (lpj=9333163)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.003333] CPU 1/1 -> Node 0
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.243715] CPU1: Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
[ 0.253369] lockdep: fixing up alternatives.
[ 0.256664] Booting processor 2/2 ip 6000
[ 0.003333] Initializing CPU#2
[ 0.003333] masked ExtINT on CPU#2
[ 0.003333] Calibrating delay using timer specific routine.. 5602.19 BogoMIPS (lpj=9333118)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.003333] CPU 2/2 -> Node 1
[ 0.003333] CPU: Physical Processor ID: 1
[ 0.003333] CPU: Processor Core ID: 0
[ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.353887] CPU2: Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
[ 0.363387] lockdep: fixing up alternatives.
[ 0.366664] Booting processor 3/3 ip 6000
[ 0.003333] Initializing CPU#3
[ 0.003333] masked ExtINT on CPU#3
[ 0.003333] Calibrating delay using timer specific routine.. 5602.23 BogoMIPS (lpj=9333181)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.003333] CPU 3/3 -> Node 1
[ 0.003333] CPU: Physical Processor ID: 1
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.463879] CPU3: Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
[ 0.473316] Brought up 4 CPUs
[ 0.476465] Total of 4 processors activated (22408.86 BogoMIPS).
[ 0.476698] Testing NMI watchdog ... OK.
[ 0.550266] net_namespace: 968 bytes
[ 0.553490] xor: automatically using best checksumming function: generic_sse
[ 0.573302] generic_sse: 8630.400 MB/sec
[ 0.576635] xor: using function: generic_sse (8630.400 MB/sec)
[ 0.580028] NET: Registered protocol family 16
[ 0.583586] No dock devices found.
[ 0.586837] node 0 link 2: io port [1000, 3fff]
[ 0.586839] TOM: 00000000d0000000 aka 3328M
[ 0.589969] node 0 link 2: mmio [d0000000, dfffffff]
[ 0.589972] node 0 link 2: mmio [a0000, bffff]
[ 0.589974] node 0 link 2: mmio [e0000000, e7ffffff]
[ 0.589976] TOM2: 0000000230000000 aka 8960M
[ 0.593302] bus: [00,ff] on node 0 link 2
[ 0.593304] bus: 00 index 0 io port: [0, ffff]
[ 0.593306] bus: 00 index 1 mmio: [d0000000, ffffffff]
[ 0.593307] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.593309] bus: 00 index 3 mmio: [230000000, fcffffffff]
[ 0.593324] ACPI: bus type pci registered
[ 0.596780] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4
[ 0.599969] PCI: MCFG area at e0000000 reserved in E820
[ 0.603407] PCI: Using MMCONFIG at e0000000 - e04fffff
[ 0.606635] PCI: Using configuration type 1 for base access
[ 0.617553] ACPI: EC: Look up EC in DSDT
[ 0.621933] ACPI: Interpreter enabled
[ 0.623302] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.630429] ACPI: Using IOAPIC for interrupt routing
[ 0.643218] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.643602] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.646639] pci 0000:00:01.1: PME# disabled
[ 0.650008] pci 0000:00:02.0: supports D1
[ 0.650009] pci 0000:00:02.0: supports D2
[ 0.650011] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.653303] pci 0000:00:02.0: PME# disabled
[ 0.656671] pci 0000:00:02.1: supports D1
[ 0.656673] pci 0000:00:02.1: supports D2
[ 0.656674] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.659969] pci 0000:00:02.1: PME# disabled
[ 0.663528] pci 0000:00:08.0: supports D1
[ 0.663530] pci 0000:00:08.0: supports D2
[ 0.663531] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.666637] pci 0000:00:08.0: PME# disabled
[ 0.670016] pci 0000:00:09.0: supports D1
[ 0.670017] pci 0000:00:09.0: supports D2
[ 0.670019] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.673304] pci 0000:00:09.0: PME# disabled
[ 0.676666] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.679969] pci 0000:00:0a.0: PME# disabled
[ 0.683330] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.686636] pci 0000:00:0d.0: PME# disabled
[ 0.689998] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.693302] pci 0000:00:0f.0: PME# disabled
[ 0.696873] pci 0000:01:04.0: supports D1
[ 0.696875] pci 0000:01:04.0: supports D2
[ 0.696898] pci 0000:00:06.0: transparent bridge
[ 0.699969] PCI: bridge 0000:00:06.0 io port: [3000, 3fff]
[ 0.703303] PCI: bridge 0000:00:06.0 32bit mmio: [d0100000, d01fffff]
[ 0.706636] PCI: bridge 0000:00:06.0 32bit mmio pref: [d8000000, dfffffff]
[ 0.710035] pci 0000:02:00.0: supports D1
[ 0.710066] PCI: bridge 0000:00:0a.0 32bit mmio: [d0200000, d02fffff]
[ 0.713386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.713458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.713481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[ 0.713508] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 0.713533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR5._PRT]
[ 0.739522] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.746786] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
[ 0.756769] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.767155] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.778473] ACPI: PCI Interrupt Link [LK1E] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.789236] ACPI: PCI Interrupt Link [LK2E] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
[ 0.795676] ACPI: PCI Interrupt Link [LK3E] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.803377] ACPI: PCI Interrupt Link [LK4E] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.813825] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.825139] ACPI: PCI Interrupt Link [LUS0] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
[ 0.834586] ACPI: PCI Interrupt Link [LMA2] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
[ 0.844277] ACPI: PCI Interrupt Link [LUS2] (IRQs *5 7 10 11 14 15 16 17 18 19 20 21 22 23)
[ 0.853963] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
[ 0.863825] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.873830] ACPI: PCI Interrupt Link [LPID] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.885589] ACPI: PCI Interrupt Link [LTID] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
[ 0.891879] ACPI: PCI Interrupt Link [LSI1] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
[ 0.901564] ACPI: PCI Interrupt Link [LSI2] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
[ 0.911393] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.913365] pnp: PnP ACPI init
[ 0.916646] ACPI: bus type pnp registered
[ 0.920659] IOAPIC[0]: Set routing entry (4-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[ 0.921289] IOAPIC[0]: Set routing entry (4-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[ 0.921379] IOAPIC[0]: Set routing entry (4-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[ 0.923450] IOAPIC[0]: Set routing entry (4-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[ 0.923886] IOAPIC[0]: Set routing entry (4-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[ 0.924783] IOAPIC[0]: Set routing entry (4-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[ 0.925590] pnp: PnP ACPI: found 14 devices
[ 0.926636] ACPI: ACPI bus type pnp unregistered
[ 0.930238] SCSI subsystem initialized
[ 0.933467] libata version 3.00 loaded.
[ 0.933747] usbcore: registered new interface driver usbfs
[ 0.936702] usbcore: registered new interface driver hub
[ 0.940064] usbcore: registered new device driver usb
[ 0.943673] PCI: Using ACPI for IRQ routing
[ 0.946637] number of MP IRQ sources: 16.
[ 0.946639] number of IO-APIC #4 registers: 24.
[ 0.946640] testing the IO APIC.......................
[ 0.949973]
[ 0.953302] IO APIC #4......
[ 0.953303] .... register #00: 04000000
[ 0.953304] ....... : physical APIC id: 04
[ 0.953306] .... register #01: 00170011
[ 0.953307] ....... : max redirection entries: 0017
[ 0.953308] ....... : PRQ implemented: 0
[ 0.953310] ....... : IO APIC version: 0011
[ 0.953311] .... register #02: 04000000
[ 0.953312] ....... : arbitration: 04
[ 0.953314] .... IRQ redirection table:
[ 0.953315] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
[ 0.953320] 00 000 1 0 0 0 0 0 0 00
[ 0.953326] 01 00F 0 0 0 0 0 1 1 31
[ 0.953331] 02 00F 0 0 0 0 0 1 1 30
[ 0.953337] 03 00F 0 0 0 0 0 1 1 33
[ 0.953343] 04 00F 0 0 0 0 0 1 1 34
[ 0.953348] 05 00F 1 0 0 0 0 1 1 35
[ 0.953354] 06 00F 0 0 0 0 0 1 1 36
[ 0.953360] 07 00F 0 0 0 0 0 1 1 37
[ 0.953365] 08 00F 0 0 0 0 0 1 1 38
[ 0.953371] 09 00F 0 1 0 1 0 1 1 39
[ 0.953377] 0a 00F 1 0 0 0 0 1 1 3A
[ 0.953382] 0b 00F 1 0 0 0 0 1 1 3B
[ 0.953388] 0c 00F 0 0 0 0 0 1 1 3C
[ 0.953393] 0d 00F 0 0 0 0 0 1 1 3D
[ 0.953399] 0e 00F 0 0 0 0 0 1 1 3E
[ 0.953405] 0f 00F 0 0 0 0 0 1 1 3F
[ 0.953410] 10 000 1 0 0 0 0 0 0 00
[ 0.953416] 11 000 1 0 0 0 0 0 0 00
[ 0.953422] 12 000 1 0 0 0 0 0 0 00
[ 0.953427] 13 000 1 0 0 0 0 0 0 00
[ 0.953433] 14 000 1 0 0 0 0 0 0 00
[ 0.953438] 15 000 1 0 0 0 0 0 0 00
[ 0.953444] 16 000 1 0 0 0 0 0 0 00
[ 0.953450] 17 000 1 0 0 0 0 0 0 00
[ 0.953452] IRQ to pin mappings:
[ 0.953453] IRQ0 -> 0:2
[ 0.953455] IRQ1 -> 0:1
[ 0.953457] IRQ3 -> 0:3
[ 0.953459] IRQ4 -> 0:4
[ 0.953460] IRQ5 -> 0:5
[ 0.953462] IRQ6 -> 0:6
[ 0.953464] IRQ7 -> 0:7
[ 0.953466] IRQ8 -> 0:8
[ 0.953467] IRQ9 -> 0:9
[ 0.953469] IRQ10 -> 0:10
[ 0.953471] IRQ11 -> 0:11
[ 0.953472] IRQ12 -> 0:12
[ 0.953474] IRQ13 -> 0:13
[ 0.953476] IRQ14 -> 0:14
[ 0.953478] IRQ15 -> 0:15
[ 0.953483] .................................... done.
[ 0.973557] PCI-DMA: Disabling AGP.
[ 0.977781] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.979968] PCI-DMA: using GART IOMMU.
[ 0.983304] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.987206] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.993677] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.997730] ACPI: RTC can wake from S4
[ 0.999979] Switched to high resolution mode on CPU 0
[ 1.000026] Switched to high resolution mode on CPU 3
[ 1.000047] Switched to high resolution mode on CPU 2
[ 1.003246] Switched to high resolution mode on CPU 1
[ 1.013368] system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
[ 1.021203] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 1.029036] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 1.036872] system 00:00: iomem range 0xfed00000-0xfed00fff has been reserved
[ 1.044213] system 00:03: iomem range 0xd0000000-0xd0007fff has been reserved
[ 1.051552] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 1.058279] system 00:04: ioport range 0x1080-0x10ff has been reserved
[ 1.065003] system 00:04: ioport range 0x1400-0x147f has been reserved
[ 1.071729] system 00:04: ioport range 0x1480-0x14ff has been reserved
[ 1.078456] system 00:04: ioport range 0x1800-0x187f has been reserved
[ 1.085183] system 00:04: ioport range 0x1880-0x18ff has been reserved
[ 1.091907] system 00:04: ioport range 0x2440-0x247f has been reserved
[ 1.098632] system 00:04: ioport range 0x2400-0x243f has been reserved
[ 1.105366] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 1.111916] system 00:07: ioport range 0xc05-0xc06 has been reserved
[ 1.119679] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
[ 1.125800] pci 0000:00:06.0: IO window: 0x3000-0x3fff
[ 1.131311] pci 0000:00:06.0: MEM window: 0xd0100000-0xd01fffff
[ 1.137610] pci 0000:00:06.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff
[ 1.145526] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
[ 1.151643] pci 0000:00:0a.0: IO window: disabled
[ 1.156719] pci 0000:00:0a.0: MEM window: 0xd0200000-0xd02fffff
[ 1.163006] pci 0000:00:0a.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff
[ 1.170932] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03
[ 1.177044] pci 0000:00:0d.0: IO window: disabled
[ 1.182114] pci 0000:00:0d.0: MEM window: disabled
[ 1.187271] pci 0000:00:0d.0: PREFETCH window: disabled
[ 1.192861] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:04
[ 1.198979] pci 0000:00:0f.0: IO window: disabled
[ 1.204048] pci 0000:00:0f.0: MEM window: disabled
[ 1.209205] pci 0000:00:0f.0: PREFETCH window: disabled
[ 1.214801] pci 0000:00:06.0: setting latency timer to 64
[ 1.214807] pci 0000:00:0a.0: setting latency timer to 64
[ 1.214812] pci 0000:00:0d.0: setting latency timer to 64
[ 1.214817] pci 0000:00:0f.0: setting latency timer to 64
[ 1.214820] bus: 00 index 0 io port: [0, ffff]
[ 1.219456] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 1.224874] bus: 01 index 0 io port: [3000, 3fff]
[ 1.229771] bus: 01 index 1 mmio: [d0100000, d01fffff]
[ 1.239972] bus: 01 index 2 mmio: [d8000000, dfffffff]
[ 1.245301] bus: 01 index 3 io port: [0, ffff]
[ 1.249937] bus: 01 index 4 mmio: [0, ffffffffffffffff]
[ 1.255354] bus: 02 index 0 mmio: [0, 0]
[ 1.259472] bus: 02 index 1 mmio: [d0200000, d02fffff]
[ 1.264801] bus: 02 index 2 mmio: [d1000000, d10fffff]
[ 1.270132] bus: 02 index 3 mmio: [0, 0]
[ 1.274253] bus: 03 index 0 mmio: [0, 0]
[ 1.278370] bus: 03 index 1 mmio: [0, 0]
[ 1.282488] bus: 03 index 2 mmio: [0, 0]
[ 1.286605] bus: 03 index 3 mmio: [0, 0]
[ 1.290722] bus: 04 index 0 mmio: [0, 0]
[ 1.294838] bus: 04 index 1 mmio: [0, 0]
[ 1.298955] bus: 04 index 2 mmio: [0, 0]
[ 1.303073] bus: 04 index 3 mmio: [0, 0]
[ 1.307207] NET: Registered protocol family 2
[ 1.343606] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.353558] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.366101] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 1.375860] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.382707] TCP reno registered
[ 1.393492] NET: Registered protocol family 1
[ 1.398166] checking if image is initramfs... it is
[ 1.501735] Freeing initrd memory: 1922k freed
[ 1.507469] Simple Boot Flag at 0x37 set to 0x80
[ 1.515235] audit: initializing netlink socket (disabled)
[ 1.520899] type=2000 audit(1221619050.520:1): initialized
[ 1.532146] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.542716] VFS: Disk quotas dquot_6.5.1
[ 1.546980] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.555347] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 1.562281] msgmni has been set to 15840
[ 1.566647] async_tx: api initialized (async)
[ 1.571215] io scheduler noop registered
[ 1.575345] io scheduler anticipatory registered
[ 1.580169] io scheduler deadline registered
[ 1.584841] io scheduler cfq registered (default)
[ 1.589785] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.797529] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 1.802799] pci 0000:00:05.1: Enabling HT MSI Mapping
[ 1.808074] pci 0000:00:05.2: Enabling HT MSI Mapping
[ 1.813351] pci 0000:00:06.0: Enabling HT MSI Mapping
[ 1.818632] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.823910] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.829182] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 1.834452] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 1.839721] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 1.844991] pci 0000:01:04.0: Boot video device
[ 1.845193] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[ 1.845222] pcieport-driver 0000:00:0a.0: found MSI capability
[ 1.851316] pci_express 0000:00:0a.0:pcie00: allocate port service
[ 1.851407] pci_express 0000:00:0a.0:pcie01: allocate port service
[ 1.851468] pci_express 0000:00:0a.0:pcie03: allocate port service
[ 1.851570] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 1.851596] pcieport-driver 0000:00:0d.0: found MSI capability
[ 1.857661] pci_express 0000:00:0d.0:pcie00: allocate port service
[ 1.857732] pci_express 0000:00:0d.0:pcie01: allocate port service
[ 1.857791] pci_express 0000:00:0d.0:pcie03: allocate port service
[ 1.857892] pcieport-driver 0000:00:0f.0: setting latency timer to 64
[ 1.857923] pcieport-driver 0000:00:0f.0: found MSI capability
[ 1.863984] pci_express 0000:00:0f.0:pcie00: allocate port service
[ 1.864056] pci_express 0000:00:0f.0:pcie01: allocate port service
[ 1.864116] pci_express 0000:00:0f.0:pcie03: allocate port service
[ 1.865960] aer 0000:00:0a.0:pcie01: AER service couldn't init device: no _OSC support
[ 1.867614] aer 0000:00:0d.0:pcie01: AER service couldn't init device: no _OSC support
[ 1.869243] aer 0000:00:0f.0:pcie01: AER service couldn't init device: no _OSC support
[ 1.869694] input: Power Button (FF) as /class/input/input0
[ 1.875475] ACPI: Power Button (FF) [PWRF]
[ 1.879888] input: Power Button (CM) as /class/input/input1
[ 1.885657] ACPI: Power Button (CM) [PWRB]
[ 1.890403] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.896470] processor ACPI0007:00: registered as cooling_device0
[ 1.902681] ACPI: Processor [C000] (supports 2 throttling states)
[ 1.909166] processor ACPI0007:01: registered as cooling_device1
[ 1.915478] processor ACPI0007:02: registered as cooling_device2
[ 1.921779] processor ACPI0007:03: registered as cooling_device3
[ 2.001837] hpet_resources: 0xfed00000 is busy
[ 2.002038] Non-volatile memory driver v1.2
[ 2.006568] Linux agpgart interface v0.103
[ 2.010966] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
[ 2.017552] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.024529] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.030642] Floppy drive(s): fd0 is 1.44M
[ 5.046687] floppy0: no floppy controllers found
[ 5.054215] brd: module loaded
[ 5.058709] loop: module loaded
[ 5.062049] tun: Universal TUN/TAP device driver, 1.6
[ 5.067295] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 5.073870] console [netcon0] enabled
[ 5.077726] netconsole: network logging started
[ 5.082451] Uniform Multi-Platform E-IDE driver
[ 5.087308] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 5.097421] Probing IDE interface ide0...
[ 6.063534] hdb: CD-224E-N, ATAPI CD/DVD-ROM drive
[ 6.120118] Probing IDE interface ide1...
[ 6.653446] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 6.658285] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.665085] hdb: ATAPI 24X CD-ROM drive, 256kB Cache
[ 6.670460] Uniform CD-ROM driver Revision: 3.20
[ 6.685431] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 6.693244] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 6.700497] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[ 6.706688] Driver 'sd' needs updating - please use bus_type methods
[ 6.713309] Driver 'sr' needs updating - please use bus_type methods
[ 6.720482] sata_nv 0000:00:05.0: version 3.5
[ 6.720779] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
[ 6.726726] IOAPIC[0]: Set routing entry (4-23 -> 0x61 -> IRQ 23 Mode:1 Active:1)
[ 6.726743] sata_nv 0000:00:05.0: PCI INT A -> Link[LTID] -> GSI 23 (level, low) -> IRQ 23
[ 6.735353] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 6.740472] sata_nv 0000:00:05.0: setting latency timer to 64
[ 6.740651] scsi0 : sata_nv
[ 6.743839] scsi1 : sata_nv
[ 6.747023] ata1: SATA max UDMA/133 cmd 0x24d0 ctl 0x24c4 bmdma 0x2490 irq 23
[ 6.754354] ata2: SATA max UDMA/133 cmd 0x24c8 ctl 0x24c0 bmdma 0x2498 irq 23
[ 7.090373] ata1: SATA link down (SStatus 0 SControl 300)
[ 7.423705] ata2: SATA link down (SStatus 0 SControl 300)
[ 7.429582] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 22
[ 7.435536] IOAPIC[0]: Set routing entry (4-22 -> 0x69 -> IRQ 22 Mode:1 Active:1)
[ 7.435551] sata_nv 0000:00:05.1: PCI INT B -> Link[LSI1] -> GSI 22 (level, low) -> IRQ 22
[ 7.444165] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 7.449263] sata_nv 0000:00:05.1: setting latency timer to 64
[ 7.449402] scsi2 : sata_nv
[ 7.452526] scsi3 : sata_nv
[ 7.455714] ata3: SATA max UDMA/133 cmd 0x24e8 ctl 0x24dc bmdma 0x24a0 irq 22
[ 7.463043] ata4: SATA max UDMA/133 cmd 0x24e0 ctl 0x24d8 bmdma 0x24a8 irq 22
[ 7.797000] ata3: SATA link down (SStatus 0 SControl 300)
[ 8.130331] ata4: SATA link down (SStatus 0 SControl 300)
[ 8.136202] ACPI: PCI Interrupt Link [LSI2] enabled at IRQ 21
[ 8.142156] IOAPIC[0]: Set routing entry (4-21 -> 0x71 -> IRQ 21 Mode:1 Active:1)
[ 8.142172] sata_nv 0000:00:05.2: PCI INT C -> Link[LSI2] -> GSI 21 (level, low) -> IRQ 21
[ 8.150785] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 8.155882] sata_nv 0000:00:05.2: setting latency timer to 64
[ 8.156027] scsi4 : sata_nv
[ 8.159160] scsi5 : sata_nv
[ 8.162335] ata5: SATA max UDMA/133 cmd 0x2800 ctl 0x24f4 bmdma 0x24b0 irq 21
[ 8.169672] ata6: SATA max UDMA/133 cmd 0x24f8 ctl 0x24f0 bmdma 0x24b8 irq 21
[ 8.507038] ata5: SATA link down (SStatus 0 SControl 300)
[ 8.840372] ata6: SATA link down (SStatus 0 SControl 300)
[ 8.846110] pata_amd 0000:00:04.0: version 0.3.10
[ 8.846134] pata_amd 0000:00:04.0: BAR 0: can't reserve I/O region [0x1f0-0x1f7]
[ 8.853891] pata_amd 0000:00:04.0: failed to request/iomap BARs for port 0 (errno=-16)
[ 8.862160] pata_amd 0000:00:04.0: BAR 2: can't reserve I/O region [0x170-0x177]
[ 8.869906] pata_amd 0000:00:04.0: failed to request/iomap BARs for port 1 (errno=-16)
[ 8.878166] pata_amd 0000:00:04.0: no available native port
[ 8.884290] Fusion MPT base driver 3.04.07
[ 8.888582] Copyright (c) 1999-2008 LSI Corporation
[ 8.893666] Fusion MPT SPI Host driver 3.04.07
[ 8.898396] Fusion MPT SAS Host driver 3.04.07
[ 8.903765] ieee1394: raw1394: /dev/raw1394 device initialized
[ 8.910299] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
[ 8.916243] IOAPIC[0]: Set routing entry (4-20 -> 0x79 -> IRQ 20 Mode:1 Active:1)
[ 8.916257] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 20 (level, low) -> IRQ 20
[ 8.924965] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 8.924968] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 8.930641] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 8.938414] ehci_hcd 0000:00:02.1: debug port 1
[ 8.943142] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 8.943159] ehci_hcd 0000:00:02.1: irq 20, io mem 0xd0041000
[ 8.956681] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 8.964675] usb usb1: configuration #1 chosen from 1 choice
[ 8.970539] hub 1-0:1.0: USB hub found
[ 8.974502] hub 1-0:1.0: 10 ports detected
[ 9.080399] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.080655] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 19
[ 9.086607] IOAPIC[0]: Set routing entry (4-19 -> 0x81 -> IRQ 19 Mode:1 Active:1)
[ 9.086622] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 19 (level, low) -> IRQ 19
[ 9.095328] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 9.095330] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 9.100926] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 9.108695] ohci_hcd 0000:00:02.0: irq 19, io mem 0xd0040000
[ 9.168822] usb usb2: configuration #1 chosen from 1 choice
[ 9.174679] hub 2-0:1.0: USB hub found
[ 9.178639] hub 2-0:1.0: 10 ports detected
[ 9.283663] USB Universal Host Controller Interface driver v3.0
[ 9.289954] usbcore: registered new interface driver usblp
[ 9.295643] Initializing USB Mass Storage driver...
[ 9.300787] usbcore: registered new interface driver usb-storage
[ 9.306995] USB Mass Storage support registered.
[ 9.311965] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 9.570302] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.575666] mice: PS/2 mouse device common for all mice
[ 9.613337] md: linear personality registered for level -1
[ 9.780862] md: raid0 personality registered for level 0
[ 9.786372] md: raid1 personality registered for level 1
[ 9.791884] md: raid10 personality registered for level 10
[ 9.853774] raid6: int64x1 2557 MB/s
[ 9.913770] raid6: int64x2 3277 MB/s
[ 9.973759] raid6: int64x4 3227 MB/s
[ 10.033775] raid6: int64x8 2269 MB/s
[ 10.093762] raid6: sse2x1 3908 MB/s
[ 10.153763] raid6: sse2x2 5114 MB/s
[ 10.213758] raid6: sse2x4 5239 MB/s
[ 10.217700] raid6: using algorithm sse2x4 (5239 MB/s)
[ 10.222948] md: raid6 personality registered for level 6
[ 10.228459] md: raid5 personality registered for level 5
[ 10.233971] md: raid4 personality registered for level 4
[ 10.244367] md: multipath personality registered for level -4
[ 10.250567] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[ 10.259494] cpuidle: using governor ladder
[ 10.264025] cpuidle: using governor menu
[ 10.268217] usbcore: registered new interface driver usbhid
[ 10.273985] usbhid: v2.6:USB HID core driver
[ 10.278568] oprofile: using NMI interrupt.
[ 10.283357] TCP cubic registered
[ 10.287003] NET: Registered protocol family 10
[ 10.292656] IPv6 over IPv4 tunneling driver
[ 10.297796] NET: Registered protocol family 17
[ 10.302830] RPC: Registered udp transport module.
[ 10.307731] RPC: Registered tcp transport module.
[ 10.312719] powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 2220 processors (4 cpu cores) (version 2.20.00)
[ 10.316673] powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x8
[ 10.329561] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa
[ 10.335416] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc
[ 10.341275] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe
[ 10.347059] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10
[ 10.352912] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10
[ 10.358772] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12
[ 10.317508] powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x8
[ 10.370709] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa
[ 10.376570] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc
[ 10.382429] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe
[ 10.388200] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10
[ 10.394060] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10
[ 10.399918] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12
[ 10.406608] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 10.413157] Freeing unused kernel memory: 676k freed
[ 10.418705] Write protecting the kernel read-only data: 5672k
[ 10.853151] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18
[ 10.853161] IOAPIC[0]: Set routing entry (4-18 -> 0x89 -> IRQ 18 Mode:1 Active:1)
[ 10.853223] arcmsr 0000:02:00.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, low) -> IRQ 18
[ 10.853230] arcmsr 0000:02:00.0: setting latency timer to 64
[ 10.866697] ARECA RAID ADAPTER6: FIRMWARE VERSION V1.44 2008-1-31
[ 10.880018] scsi6 : Areca SATA Host Adapter RAID Controller( RAID6 capable)
[ 10.880019] Driver Version 1.20.00.15 2008/02/27
[ 10.881528] scsi 6:0:0:0: Direct-Access Areca ARC-1280-VOL#00 R001 PQ: 0 ANSI: 5
[ 10.882676] sd 6:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 10.882721] sd 6:0:0:0: [sda] 21484367872 512-byte hardware sectors (10999996 MB)
[ 10.882768] sd 6:0:0:0: [sda] Write Protect is off
[ 10.882772] sd 6:0:0:0: [sda] Mode Sense: cb 00 00 08
[ 10.882851] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.883023] sd 6:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 10.883067] sd 6:0:0:0: [sda] 21484367872 512-byte hardware sectors (10999996 MB)
[ 10.883108] sd 6:0:0:0: [sda] Write Protect is off
[ 10.883111] sd 6:0:0:0: [sda] Mode Sense: cb 00 00 08
[ 10.883190] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.883195] sda: sda1 sda2 sda3 sda4
[ 10.915493] sd 6:0:0:0: [sda] Attached SCSI disk
[ 10.916329] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 10.917710] scsi 6:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0
[ 10.918870] scsi 6:0:16:0: Attached scsi generic sg1 type 3
[ 11.000429] Clocksource tsc unstable (delta = -89318010 ns)
[ 11.073271] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 11.094544] 3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
[ 11.128602] Adaptec aacraid driver 1.1-5[2456]-ms
[ 11.402730] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 11.408669] SGI XFS Quota Management subsystem
[ 11.459380] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[ 11.459388] Copyright (c) 1999-2006 Intel Corporation.
[ 14.751255] kjournald starting. Commit interval 5 seconds
[ 14.751255] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.062543] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2440
[ 17.062600] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2400
[ 17.073911] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 17.074765] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 17
[ 17.074780] IOAPIC[0]: Set routing entry (4-17 -> 0x91 -> IRQ 17 Mode:1 Active:1)
[ 17.074895] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 17 (level, low) -> IRQ 17
[ 17.074908] forcedeth 0000:00:08.0: setting latency timer to 64
[ 17.079543] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 0, addr 00:e0:81:76:28:d6
[ 17.079558] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 17.080351] ACPI: PCI Interrupt Link [LMA2] enabled at IRQ 16
[ 17.080363] IOAPIC[0]: Set routing entry (4-16 -> 0x99 -> IRQ 16 Mode:1 Active:1)
[ 17.080418] forcedeth 0000:00:09.0: PCI INT A -> Link[LMA2] -> GSI 16 (level, low) -> IRQ 16
[ 17.080427] forcedeth 0000:00:09.0: setting latency timer to 64
[ 17.083446] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:e0:81:76:28:d7
[ 17.083454] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 17.972394] EXT3 FS on sda3, internal journal
[ 18.304174] SMsC 37B787 watchdog component driver 1.1 initialising...
[ 18.305555] smsc37b787_wdt: Timeout set to 60 second(s).
[ 18.305560] smsc37b787_wdt: Watchdog initialized and sleeping (nowayout=0)...
[ 20.567087] kjournald starting. Commit interval 5 seconds
[ 20.590125] EXT3 FS on sda4, internal journal
[ 20.590141] EXT3-fs: mounted filesystem with journal data mode.
[ 20.644881] Adding 15999992k swap on /dev/sda2. Priority:-1 extents:1 across:15999992k
[ 40.560439] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 40.567835] NFSD: starting 90-second grace period
[ 42.150031] eth0: no IPv6 routers present
[ 48.719390] w83627hf: Found W83627HF chip at 0xc00
[ 49.799833] kjournald starting. Commit interval 5 seconds
[ 49.800228] EXT3 FS on sda1, internal journal
[ 49.800255] EXT3-fs: mounted filesystem with ordered data mode.