Re: 2.6.26-rc9-git9 doesn't boot on Macintel

[Jack Howarth]

YH,
  Using the debug patches and your mmconfig patch as well as the kernel
options 'debug initcall_debug apic=verbose pci=routeirq", I see the following
messages that don't scroll off screen...

PCI: 0000:00:1f.1 reg 10 io port: [ 40d8, 40df]
PCI: 0000:00:1f.1 reg 14 io port: [ 40ec, 40ef]
PCI: 0000:00:1f.1 reg 18 io port: [ 40d0, 40d7]
PCI: 0000:00:1f.1 reg 1c io port: [ 40e8, 40eb]
PCI: 0000:00:1f.1 reg 20 io port: [ 40b0, 40bf]
pci 0000:00.1f.1: calling pci_fixup_transparent_bridge+0x0/0x2a
PCI: Found 0000:00:1f.2 [8086/27c4] 000101 00
PCI: 0000:00:1f.2 reg 10 io port: [ 40c8, 40cf]
PCI: 0000:00:1f.2 reg 14 io port: [ 40e4, 40e7]
PCI: 0000:00:1f.2 reg 18 io port: [ 40c0, 40c7]
PCI: 0000:00:1f.2 reg 1c io port: [ 40e0, 40e3]
PCI: 0000:00:1f.2 reg 20 io port: [ 40a0, 40af]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [d8405000, d84053ff]
pci: 0000:00:1f.2 calling pci_fixup_transparent_bridge+0x0/0x2a
PCI: Found 0000:00:1f.3 [8086/27da] 000c05 00
PCI: 0000:00:1f.3 reg 20 io port: [ efa0, efbf]
PCI: 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a
PCI: Fixups for bus 0000:00
PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0
PCI: Scanning bus 0000:01
PCI: Found 0000:01:00.0 [1002/71c5] 000300 00
PCI: 0000:00:01:00.0 reg 10 32bit mmio: [c0000000, cfffffff]
PCI: 0000:00:01:00.0 reg 14 io port: [ 3000, 30ff]
PCI: 0000:00:01:00.0 reg 18 32bit mmio: [d8300000, d830ffff]

...at which point the boot freezes.
                          Jack
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/