Re: [patch 01/15] Kernel Tracepoints

From: Mathieu Desnoyers
Date: Tue Jul 15 2008 - 12:51:36 EST


* Peter Zijlstra (peterz@xxxxxxxxxxxxx) wrote:
> On Tue, 2008-07-15 at 12:08 -0400, Mathieu Desnoyers wrote:
> > * Peter Zijlstra (peterz@xxxxxxxxxxxxx) wrote:
> > > On Tue, 2008-07-15 at 11:22 -0400, Mathieu Desnoyers wrote:
> > > > * Peter Zijlstra (peterz@xxxxxxxxxxxxx) wrote:
> > > > >
> > > > > I'm confused by the barrier games here.
> > > > >
> > > > > Why not:
> > > > >
> > > > > void **it_func;
> > > > >
> > > > > preempt_disable();
> > > > > it_func = rcu_dereference((tp)->funcs);
> > > > > if (it_func) {
> > > > > for (; *it_func; it_func++)
> > > > > ((void(*)(proto))(*it_func))(args);
> > > > > }
> > > > > preempt_enable();
> > > > >
> > > > > That is, why can we skip the barrier when !it_func? is that because at
> > > > > that time we don't actually dereference it_func and therefore cannot
> > > > > observe stale data?
> > > > >
> > > >
> > > > Exactly. I used the implementation of rcu_assign_pointer as a hint that
> > > > we did not need barriers when setting the pointer to NULL, and thus we
> > > > should not need the read barrier when reading the NULL pointer, because
> > > > it references no data.
> > > >
> > > > #define rcu_assign_pointer(p, v) \
> > > > ({ \
> > > > if (!__builtin_constant_p(v) || \
> > > > ((v) != NULL)) \
> > > > smp_wmb(); \
> > > > (p) = (v); \
> > > > })
> > >
> > > Yeah, I saw that,.. made me wonder. It basically assumes that when we
> > > write:
> > >
> > > rcu_assign_pointer(foo, NULL);
> > >
> > > foo will not be used as an index or offset.
> > >
> > > I guess Paul has thought it through and verified all in-kernel use
> > > cases, but it still makes me feel unconfortable.
> > >
> > > > #define rcu_dereference(p) ({ \
> > > > typeof(p) _________p1 = ACCESS_ONCE(p); \
> > > > smp_read_barrier_depends(); \
> > > > (_________p1); \
> > > > })
> > > >
> > > > But I think you are right, since we are already in unlikely code, using
> > > > rcu_dereference as you do is better than my use of read barrier depends.
> > > > It should not change anything in the assembly result except on alpha,
> > > > where the read_barrier_depends() is not a nop.
> > > >
> > > > I wonder if there would be a way to add this kind of NULL pointer case
> > > > check without overhead in rcu_dereference() on alpha. I guess not, since
> > > > the pointer is almost never known at compile-time. And I guess Paul must
> > > > already have thought about it. The only case where we could add this
> > > > test is when we know that we have a if (ptr != NULL) test following the
> > > > rcu_dereference(); we could then assume the compiler will merge the two
> > > > branches since they depend on the same condition.
> > >
> > > I remember seeing a thread about all this special casing NULL, but have
> > > never been able to find it again - my google skillz always fail me.
> > >
> > > Basically it doesn't work if you use the variable as an index/offset,
> > > because in that case 0 is a valid offset and you still generate a data
> > > dependency.
> > >
> > > IIRC the conclusion was that the gains were too small to spend more time
> > > on it, although I would like to hear about the special case in
> > > rcu_assign_pointer.
> > >
> > > /me goes use git blame....
> > >
> >
> > Actually, we could probably do the following, which also adds an extra
> > coherency check about non-NULL pointer assumptions :
> >
> > #ifdef CONFIG_RCU_DEBUG /* this would be new */
> > #define DEBUG_RCU_BUG_ON(x) BUG_ON(x)
> > #else
> > #define DEBUG_RCU_BUG_ON(x)
> > #endif
> >
> > #define rcu_dereference(p) ({ \
> > typeof(p) _________p1 = ACCESS_ONCE(p); \
> > if (p != NULL) \
> > smp_read_barrier_depends(); \
> > (_________p1); \
> > })
> >
> > #define rcu_dereference_non_null(p) ({ \
> > typeof(p) _________p1 = ACCESS_ONCE(p); \
> > DEBUG_RCU_BUG_ON(p == NULL); \
> > smp_read_barrier_depends(); \
> > (_________p1); \
> > })
> >
> > The use-case where rcu_dereference() would be used is when it is
> > followed by a null pointer check (grepping through the sources shows me
> > this is a very very common case). In rare cases, it is assumed that the
> > pointer is never NULL and it is used just after the rcu_dereference. It
> > those cases, the extra test could be saved on alpha by using
> > rcu_dereference_non_null(p), which would check the the pointer is indeed
> > never NULL under some debug kernel configuration.
> >
> > Does it make sense ?
>
> This would break the case where the dereferenced variable is used as an
> index/offset where 0 is a valid value and still generates data
> dependencies.
>
> So if with your new version we do:
>
> i = rcu_dereference(foo);
> j = table[i];
>
> which translates into:
>
> i = ACCESS_ONCE(foo);
> if (i)
> smp_read_barrier_depends();
> j = table[i];
>
> which when i == 0, would fail to do the barrier and can thus cause j to
> be a wrong value.
>
> Sadly I'll have to defer to Paul to explain exactly how that can happen
> - I always get my head in a horrible twist with this case.
>

I completely agree with you. However, given the current
rcu_assign_pointer() implementation, we already have this problem. My
proposal assumes the current rcu_assign_pointer() behavior is correct
and that those are never ever used for index/offsets.

We could enforce this as a compile-time check with something along the
lines of :

#define BUILD_BUG_ON_NOT_OFFSETABLE(x) (void)(x)[0]

And use it both in rcu_assign_pointer() and rcu_dereference(). It would
check for any type passed to rcu_assign_pointer and rcu_dereference
which is not either a pointer or an array.

Then if someone really want to shoot himself in the foot by casting a
pointer to a long after the rcu_deref, that's his problem.

Hrm, looking at rcu_assign_pointer tells me that the ((v) != NULL) test
should probably already complain if v is not a pointer. So my build test
is probably unneeded.

Mathieu

--
Mathieu Desnoyers
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/