Re: Oops when using growisofs

[Jens Axboe]

On Thu, Jun 26 2008, Michael Buesch wrote:
> On Thursday 26 June 2008 20:11:42 Jens Axboe wrote:
> > On Thu, Jun 26 2008, Jan Kara wrote:
> > > On Wed 25-06-08 11:46:29, Michael Buesch wrote:
> > > > On Wednesday 25 June 2008 11:37:00 Jan Kara wrote:
> > > > > > Yeah the IO error is the trigger.
> > > > > > I noticed that it had obvious troubles accessing the DVD that was in the drive.
> > > > > > It sweeped over it for several seconds, then hung the system for 2 or 3 seconds
> > > > > > and then oopsed. But after that everything continued to work as usual.
> > > > > > (Except kded of course)
> > > > >   Hmm, by "accessing" do you mean that you've mounted the burned DVD and when
> > > > > browsing it the IO error and the oops occured or that IO error happened
> > > > > when burning? It is important because in the first case i_blkbits would be
> > > > > taken from some ISOFS inode desribing some file while in the second case
> > > > > i_blkbits are from the inode of the device...
> > > > I don't know. kded, which caused the oops, is always running. It is a KDE daemon
> > > > that polls device state and so on. So yeah, it might have accessed the drive
> > > > while growisofs was writing to it.
> > > > 
> > > > However with "accessing" I mean the DVD drive motor was spinning up and down
> > > > and the laser lens was moving like crazy. The sound that happens, if you put
> > > > a completely scratched DVD into the drive and it is unable to make sense of it.
> > > > However, this was not scratched. It was a new DVD with one session on it that
> > > > I just burnt 5 minutes before that. So I wanted to append another session to it
> > > > and it crashed and resulted in IO errors in growisofs.
> > >   I've been looking into this problem for some time. The only way how
> > >   I see blocksize can be set so big is in cdrom_read_capacity() in
> > >   drivers/ide/ide-cd.c. That basically blindly fills in
> > >   queue->hardsect_size with what the drive returns and this can
> > >   propagate in bd_set_size() to i_blkbits.  Jens, do you think that is
> > >   possible? Shouldn't ide_cd_read_toc() do some sanity checks of the
> > >   blocksize returned?
> > 
> > It can't hurt, the value should be >= 512b and <= 4kb. Normally it would
> > be 2kb, but some devices have a 512b switch so that is also seen. Not
> > sure that 1kb and 4kb are valid, but at least it would still point to
> > the drive possibly returning valid data and not garbage. So accept all
> > those, reject (and complain) if it isn't one of those and default to 2kb.
> 
> I agree with the need for a hardware sanity check and I would happily test
> any RFC patch :)

Something like this, totally untested...

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 68e7f19..5c1e663 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1308,13 +1308,29 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
 	req.cmd_flags |= REQ_QUIET;
 
 	stat = ide_cd_queue_pc(drive, &req);
-	if (stat == 0) {
-		*capacity = 1 + be32_to_cpu(capbuf.lba);
-		*sectors_per_frame =
-			be32_to_cpu(capbuf.blocklen) >> SECTOR_BITS;
+	if (stat)
+		return stat;
+
+	/*
+	 * Sanity check the given block size
+	 */
+	switch (capbuf.blocklen) {
+	case 512:
+	case 1024:
+	case 2048:
+	case 4096:
+		break;
+	default:
+		printk(KERN_ERR "ide-cd: weird block size %u\n",
+							capbuf.blocklen);
+		printk(KERN_ERR "ide-cd: default to 2kb block size\n");
+		capbuf.blocklen = 2048;
+		break;
 	}
 
-	return stat;
+	*capacity = 1 + be32_to_cpu(capbuf.lba);
+	*sectors_per_frame = be32_to_cpu(capbuf.blocklen) >> SECTOR_BITS;
+	return 0;
 }
 
 static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag,

-- 
Jens Axboe

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/