[PATCH] x86: numa32 pfn print out using hex instead

From: Yinghai Lu
Date: Mon Jun 23 2008 - 19:40:26 EST



Signed-off-by: Yinghai Lu <yhlu.kernel@xxxxxxxxx>

---
arch/x86/kernel/srat_32.c | 31 +++++++++++++++++++------------
arch/x86/mm/discontig_32.c | 29 +++++++++++++++--------------
2 files changed, 34 insertions(+), 26 deletions(-)

Index: linux-2.6/arch/x86/kernel/srat_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/srat_32.c
+++ linux-2.6/arch/x86/kernel/srat_32.c
@@ -93,7 +93,7 @@ acpi_numa_processor_affinity_init(struct

apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo;

- printk("CPU 0x%02X in proximity domain 0x%02X\n",
+ printk(KERN_DEBUG "CPU %02x in proximity domain %02x\n",
cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo);
}

@@ -134,7 +134,8 @@ acpi_numa_memory_affinity_init(struct ac


if (num_memory_chunks >= MAXCHUNKS) {
- printk("Too many mem chunks in SRAT. Ignoring %lld MBytes at %llx\n",
+ printk(KERN_WARNING "Too many mem chunks in SRAT."
+ " Ignoring %lld MBytes at %llx\n",
size/(1024*1024), paddr);
return;
}
@@ -155,7 +156,8 @@ acpi_numa_memory_affinity_init(struct ac

num_memory_chunks++;

- printk("Memory range 0x%lX to 0x%lX (type 0x%X) in proximity domain 0x%02X %s\n",
+ printk(KERN_DEBUG "Memory range %08lx to %08lx (type %x)"
+ " in proximity domain %02x %s\n",
start_pfn, end_pfn,
memory_affinity->memory_type,
pxm,
@@ -186,7 +188,7 @@ static __init void node_read_chunk(int n
* *possible* memory hotplug areas the same as normal RAM.
*/
if (memory_chunk->start_pfn >= max_pfn) {
- printk (KERN_INFO "Ignoring SRAT pfns: 0x%08lx -> %08lx\n",
+ printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n",
memory_chunk->start_pfn, memory_chunk->end_pfn);
return;
}
@@ -212,7 +214,8 @@ int __init get_memcfg_from_srat(void)
goto out_fail;

if (num_memory_chunks == 0) {
- printk("could not finy any ACPI SRAT memory areas.\n");
+ printk(KERN_WARNING
+ "could not finy any ACPI SRAT memory areas.\n");
goto out_fail;
}

@@ -239,20 +242,23 @@ int __init get_memcfg_from_srat(void)
for (i = 0; i < num_memory_chunks; i++)
node_memory_chunk[i].nid = pxm_to_node(node_memory_chunk[i].pxm);

- printk("pxm bitmap: ");
+ printk(KERN_DEBUG "pxm bitmap: ");
for (i = 0; i < sizeof(pxm_bitmap); i++) {
- printk("%02X ", pxm_bitmap[i]);
+ printk(KERN_CONT "%02x ", pxm_bitmap[i]);
}
- printk("\n");
- printk("Number of logical nodes in system = %d\n", num_online_nodes());
- printk("Number of memory chunks in system = %d\n", num_memory_chunks);
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG "Number of logical nodes in system = %d\n",
+ num_online_nodes());
+ printk(KERN_DEBUG "Number of memory chunks in system = %d\n",
+ num_memory_chunks);

for (i = 0; i < MAX_APICID; i++)
apicid_2_node[i] = pxm_to_node(apicid_to_pxm[i]);

for (j = 0; j < num_memory_chunks; j++){
struct node_memory_chunk_s * chunk = &node_memory_chunk[j];
- printk("chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
+ printk(KERN_DEBUG
+ "chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
node_read_chunk(chunk->nid, chunk);
e820_register_active_regions(chunk->nid, chunk->start_pfn,
@@ -268,6 +274,7 @@ int __init get_memcfg_from_srat(void)
}
return 1;
out_fail:
- printk("failed to get NUMA memory information from SRAT table\n");
+ printk(KERN_ERR "failed to get NUMA memory information from SRAT"
+ " table\n");
return 0;
}
Index: linux-2.6/arch/x86/mm/discontig_32.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/discontig_32.c
+++ linux-2.6/arch/x86/mm/discontig_32.c
@@ -76,13 +76,13 @@ void memory_present(int nid, unsigned lo
{
unsigned long pfn;

- printk(KERN_INFO "Node: %d, start_pfn: %ld, end_pfn: %ld\n",
+ printk(KERN_INFO "Node: %d, start_pfn: %lx, end_pfn: %lx\n",
nid, start, end);
printk(KERN_DEBUG " Setting physnode_map array to node %d for pfns:\n", nid);
printk(KERN_DEBUG " ");
for (pfn = start; pfn < end; pfn += PAGES_PER_ELEMENT) {
physnode_map[pfn / PAGES_PER_ELEMENT] = nid;
- printk(KERN_CONT "%ld ", pfn);
+ printk(KERN_CONT "%lx ", pfn);
}
printk(KERN_CONT "\n");
}
@@ -117,7 +117,7 @@ static unsigned long kva_pages;
*/
int __init get_memcfg_numa_flat(void)
{
- printk("NUMA - single node, flat memory mode\n");
+ printk(KERN_DEBUG "NUMA - single node, flat memory mode\n");

node_start_pfn[0] = 0;
node_end_pfn[0] = max_pfn;
@@ -233,7 +233,7 @@ static unsigned long calculate_numa_rema
* The acpi/srat node info can show hot-add memroy zones
* where memory could be added but not currently present.
*/
- printk("node %d pfn: [%lx - %lx]\n",
+ printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n",
nid, node_start_pfn[nid], node_end_pfn[nid]);
if (node_start_pfn[nid] > max_pfn)
continue;
@@ -268,7 +268,8 @@ static unsigned long calculate_numa_rema
node_remap_size[nid] = size;
node_remap_offset[nid] = reserve_pages;
reserve_pages += size;
- printk("Reserving %ld pages of KVA for lmem_map of node %d at %llx\n",
+ printk(KERN_DEBUG "Reserving %ld pages of KVA for lmem_map of"
+ " node %d at %llx\n",
size, nid, node_kva_final>>PAGE_SHIFT);

/*
@@ -290,7 +291,7 @@ static unsigned long calculate_numa_rema
remove_active_range(nid, node_remap_start_pfn[nid],
node_remap_start_pfn[nid] + size);
}
- printk("Reserving total of %ld pages for numa KVA remap\n",
+ printk(KERN_INFO "Reserving total of %lx pages for numa KVA remap\n",
reserve_pages);
return reserve_pages;
}
@@ -304,7 +305,7 @@ static void init_remap_allocator(int nid
node_remap_alloc_vaddr[nid] = node_remap_start_vaddr[nid] +
ALIGN(sizeof(pg_data_t), PAGE_SIZE);

- printk ("node %d will remap to vaddr %08lx - %08lx\n", nid,
+ printk(KERN_DEBUG "node %d will remap to vaddr %08lx - %08lx\n", nid,
(ulong) node_remap_start_vaddr[nid],
(ulong) node_remap_end_vaddr[nid]);
}
@@ -340,9 +341,9 @@ void __init initmem_init(unsigned long s
if (kva_start_pfn == -1UL)
panic("Can not get kva space\n");

- printk("kva_start_pfn ~ %ld find_max_low_pfn() ~ %ld\n",
+ printk(KERN_INFO "kva_start_pfn ~ %lx max_low_pfn ~ %lx\n",
kva_start_pfn, max_low_pfn);
- printk("max_pfn = %ld\n", max_pfn);
+ printk(KERN_INFO "max_pfn = %lx\n", max_pfn);

/* avoid clash with initrd */
reserve_early(kva_start_pfn<<PAGE_SHIFT,
@@ -362,17 +363,17 @@ void __init initmem_init(unsigned long s
#endif
printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
pages_to_mb(max_low_pfn));
- printk("min_low_pfn = %ld, max_low_pfn = %ld, highstart_pfn = %ld\n",
- min_low_pfn, max_low_pfn, highstart_pfn);
+ printk(KERN_DEBUG "max_low_pfn = %lx, highstart_pfn = %lx\n",
+ max_low_pfn, highstart_pfn);

- printk("Low memory ends at vaddr %08lx\n",
+ printk(KERN_DEBUG "Low memory ends at vaddr %08lx\n",
(ulong) pfn_to_kaddr(max_low_pfn));
for_each_online_node(nid) {
init_remap_allocator(nid);

allocate_pgdat(nid);
}
- printk("High memory starts at vaddr %08lx\n",
+ printk(KERN_DEBUG "High memory starts at vaddr %08lx\n",
(ulong) pfn_to_kaddr(highstart_pfn));
for_each_online_node(nid)
propagate_e820_map_node(nid);
@@ -413,7 +414,7 @@ void __init set_highmem_pages_init(void)
zone_end_pfn = zone_start_pfn + zone->spanned_pages;

nid = zone_to_nid(zone);
- printk("Initializing %s for node %d (%08lx:%08lx)\n",
+ printk(KERN_INFO "Initializing %s for node %d (%08lx:%08lx)\n",
zone->name, nid, zone_start_pfn, zone_end_pfn);

add_highpages_with_active_regions(nid, zone_start_pfn,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/