Re: [PATCH 2/3] e1000e: make ioport free

From: Taku Izumi
Date: Mon Jun 23 2008 - 04:33:22 EST


This patch makes e1000e driver ioport-free.
This corrects behavior in probe function so as not to request ioport
resources.

Signed-off-by: Taku Izumi <izumi.taku@xxxxxxxxxxxxxx>
---
drivers/net/e1000e/e1000.h | 3 +++
drivers/net/e1000e/netdev.c | 20 ++++++++++++++------
2 files changed, 17 insertions(+), 6 deletions(-)

Index: linux-2.6.25.7/drivers/net/e1000e/e1000.h
===================================================================
--- linux-2.6.25.7.orig/drivers/net/e1000e/e1000.h
+++ linux-2.6.25.7/drivers/net/e1000e/e1000.h
@@ -266,6 +266,9 @@ struct e1000_adapter {
unsigned long led_status;

unsigned int flags;
+
+ /* for ioport free */
+ int bars;
};

struct e1000_info {
Index: linux-2.6.25.7/drivers/net/e1000e/netdev.c
===================================================================
--- linux-2.6.25.7.orig/drivers/net/e1000e/netdev.c
+++ linux-2.6.25.7/drivers/net/e1000e/netdev.c
@@ -3523,7 +3523,8 @@ static int e1000_resume(struct pci_dev *
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
e1000e_disable_l1aspm(pdev);
- err = pci_enable_device(pdev);
+
+ err = pci_enable_device_mem(pdev);
if (err) {
dev_err(&pdev->dev,
"Cannot enable PCI device from suspend\n");
@@ -3622,9 +3623,11 @@ static pci_ers_result_t e1000_io_slot_re
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ int err;

e1000e_disable_l1aspm(pdev);
- if (pci_enable_device(pdev)) {
+ err = pci_enable_device_mem(pdev);
+ if (err) {
dev_err(&pdev->dev,
"Cannot re-enable PCI device after reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
@@ -3724,9 +3727,13 @@ static int __devinit e1000_probe(struct
int i, err, pci_using_dac;
u16 eeprom_data = 0;
u16 eeprom_apme_mask = E1000_EEPROM_APME;
+ int bars;

e1000e_disable_l1aspm(pdev);
- err = pci_enable_device(pdev);
+
+ /* do not allocate ioport bars when not needed */
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ err = pci_enable_device_mem(pdev);
if (err)
return err;

@@ -3749,7 +3756,7 @@ static int __devinit e1000_probe(struct
}
}

- err = pci_request_regions(pdev, e1000e_driver_name);
+ err = pci_request_selected_regions(pdev, bars, e1000e_driver_name);
if (err)
goto err_pci_reg;

@@ -3773,6 +3780,7 @@ static int __devinit e1000_probe(struct
adapter->hw.adapter = adapter;
adapter->hw.mac.type = ei->mac;
adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
+ adapter->bars = bars;

mmio_start = pci_resource_start(pdev, 0);
mmio_len = pci_resource_len(pdev, 0);
@@ -4001,7 +4009,7 @@ err_sw_init:
err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
- pci_release_regions(pdev);
+ pci_release_selected_regions(pdev, bars);
err_pci_reg:
err_dma:
pci_disable_device(pdev);
@@ -4045,7 +4053,7 @@ static void __devexit e1000_remove(struc
iounmap(adapter->hw.hw_addr);
if (adapter->hw.flash_address)
iounmap(adapter->hw.flash_address);
- pci_release_regions(pdev);
+ pci_release_selected_regions(pdev, adapter->bars);

free_netdev(netdev);



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/