[git patches] libata fixes

From: Jeff Garzik
Date: Wed Jun 18 2008 - 21:00:27 EST



Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

drivers/ata/Kconfig | 10 +++++++++-
drivers/ata/ahci.c | 23 ++++++++++++++++++++---
drivers/ata/ata_piix.c | 7 +++++++
drivers/ata/libata-core.c | 4 ++--
drivers/ata/libata-scsi.c | 16 +++++++---------
drivers/ata/libata.h | 2 +-
drivers/ata/sata_mv.c | 21 +++++++++++++++++++++
7 files changed, 67 insertions(+), 16 deletions(-)

Ben Dooks (1):
LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver

Mark Lord (2):
sata_mv: enable async_notify for 60x1 Rev.C0 and higher
sata_mv: warn on PIO with multiple DRQs

Tejun Heo (4):
ahci: jmb361 has only one port
libata: don't check whether to use DMA or not for no data commands
ata_piix: add TECRA M4 to broken suspend list
ahci: sis can't do PMP

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 9bf2986..ae84949 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -651,9 +651,17 @@ config PATA_WINBOND_VLB
Support for the Winbond W83759A controller on Vesa Local Bus
systems.

+config HAVE_PATA_PLATFORM
+ bool
+ help
+ This is an internal configuration node for any machine that
+ uses pata-platform driver to enable the relevant driver in the
+ configuration structure without having to submit endless patches
+ to update the PATA_PLATFORM entry.
+
config PATA_PLATFORM
tristate "Generic platform device PATA support"
- depends on EMBEDDED || ARCH_RPC || PPC
+ depends on EMBEDDED || ARCH_RPC || PPC || HAVE_PATA_PLATFORM
help
This option enables support for generic directly connected ATA
devices commonly found on embedded systems.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 966ab40..6a4a2a2 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -90,6 +90,7 @@ enum {
board_ahci_mv = 4,
board_ahci_sb700 = 5,
board_ahci_mcp65 = 6,
+ board_ahci_nopmp = 7,

/* global controller registers */
HOST_CAP = 0x00, /* host capabilities */
@@ -401,6 +402,14 @@ static const struct ata_port_info ahci_port_info[] = {
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
+ /* board_ahci_nopmp */
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_PMP),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
};

static const struct pci_device_id ahci_pci_tbl[] = {
@@ -525,9 +534,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */

/* SiS */
- { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
- { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */
- { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
+ { PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp }, /* SiS 966 */
+ { PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp }, /* SiS 968 */
+ { PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp }, /* SiS 968 */

/* Marvell */
{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
@@ -653,6 +662,14 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
cap &= ~HOST_CAP_PMP;
}

+ if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
+ port_map != 1) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "JMB361 has only one port, port_map 0x%x -> 0x%x\n",
+ port_map, 1);
+ port_map = 1;
+ }
+
/*
* Temporary Marvell 6145 hack: PATA port presence
* is asserted through the standard AHCI port
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 81b7ae3..a90ae03 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1043,6 +1043,13 @@ static int piix_broken_suspend(void)
},
},
{
+ .ident = "TECRA M4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M4"),
+ },
+ },
+ {
.ident = "TECRA M5",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index cc816ca..303fc0d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4297,7 +4297,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc)
}

/**
- * ata_check_atapi_dma - Check whether ATAPI DMA can be supported
+ * atapi_check_dma - Check whether ATAPI DMA can be supported
* @qc: Metadata associated with taskfile to check
*
* Allow low-level driver to filter ATA PACKET commands, returning
@@ -4310,7 +4310,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc)
* RETURNS: 0 when ATAPI DMA can be used
* nonzero otherwise
*/
-int ata_check_atapi_dma(struct ata_queued_cmd *qc)
+int atapi_check_dma(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 2e6e162..57a4364 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2343,8 +2343,8 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
{
struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
- int using_pio = (dev->flags & ATA_DFLAG_PIO);
int nodata = (scmd->sc_data_direction == DMA_NONE);
+ int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO);
unsigned int nbytes;

memset(qc->cdb, 0, dev->cdb_len);
@@ -2362,7 +2362,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
ata_qc_set_pc_nbytes(qc);

/* check whether ATAPI DMA is safe */
- if (!using_pio && ata_check_atapi_dma(qc))
+ if (!nodata && !using_pio && atapi_check_dma(qc))
using_pio = 1;

/* Some controller variants snoop this value for Packet
@@ -2402,13 +2402,11 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
qc->tf.lbam = (nbytes & 0xFF);
qc->tf.lbah = (nbytes >> 8);

- if (using_pio || nodata) {
- /* no data, or PIO data xfer */
- if (nodata)
- qc->tf.protocol = ATAPI_PROT_NODATA;
- else
- qc->tf.protocol = ATAPI_PROT_PIO;
- } else {
+ if (nodata)
+ qc->tf.protocol = ATAPI_PROT_NODATA;
+ else if (using_pio)
+ qc->tf.protocol = ATAPI_PROT_PIO;
+ else {
/* DMA data xfer */
qc->tf.protocol = ATAPI_PROT_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 4514283..1cf803a 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -106,7 +106,7 @@ extern void ata_sg_clean(struct ata_queued_cmd *qc);
extern void ata_qc_free(struct ata_queued_cmd *qc);
extern void ata_qc_issue(struct ata_queued_cmd *qc);
extern void __ata_qc_complete(struct ata_queued_cmd *qc);
-extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
+extern int atapi_check_dma(struct ata_queued_cmd *qc);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
extern void ata_dev_init(struct ata_device *dev);
extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp);
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 60391e9..28092bc 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1322,6 +1322,9 @@ static int mv_port_start(struct ata_port *ap)
goto out_port_free_dma_mem;
memset(pp->crpb, 0, MV_CRPB_Q_SZ);

+ /* 6041/6081 Rev. "C0" (and newer) are okay with async notify */
+ if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0)
+ ap->flags |= ATA_FLAG_AN;
/*
* For GEN_I, there's no NCQ, so we only allocate a single sg_tbl.
* For later hardware, we need one unique sg_tbl per NCQ tag.
@@ -1592,6 +1595,24 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)

if ((qc->tf.protocol != ATA_PROT_DMA) &&
(qc->tf.protocol != ATA_PROT_NCQ)) {
+ static int limit_warnings = 10;
+ /*
+ * Errata SATA#16, SATA#24: warn if multiple DRQs expected.
+ *
+ * Someday, we might implement special polling workarounds
+ * for these, but it all seems rather unnecessary since we
+ * normally use only DMA for commands which transfer more
+ * than a single block of data.
+ *
+ * Much of the time, this could just work regardless.
+ * So for now, just log the incident, and allow the attempt.
+ */
+ if (limit_warnings && (qc->nbytes / qc->sect_size) > 1) {
+ --limit_warnings;
+ ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME
+ ": attempting PIO w/multiple DRQ: "
+ "this may fail due to h/w errata\n");
+ }
/*
* We're about to send a non-EDMA capable command to the
* port. Turn off EDMA so there won't be problems accessing
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/