Re: [PATCH 3/4] ide-pmac: add ->init_dev method (take 2)

From: Bartlomiej Zolnierkiewicz
Date: Tue Jun 17 2008 - 16:45:19 EST


On Tuesday 17 June 2008, Stephen Rothwell wrote:
> Hi Bart,
>
> On Mon, 16 Jun 2008 21:24:47 +0200 Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> wrote:
> >
> > +static void pmac_ide_init_dev(ide_drive_t *drive)
> > +{
> > + ide_hwif_t *hwif = drive->hwif;
> > + pmac_ide_hwif_t *pmif =
> > + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
> > +
> > + if (pmif->mediabay) {
> > +#ifdef CONFIG_PMAC_MEDIABAY
> > + if (check_media_bay(np->parent, MB_CD) == -ENODEV)
> ^^
> "np" doesn't exist here.

uh, it should be pmif->node there... take 3...

From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: [PATCH] ide-pmac: add ->init_dev method (take 3)

v2/3:
* Build fixes from Stephen Rothwell.

There should be no functional changes caused by this patch.

Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Cc: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ide/ppc/pmac.c | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)

Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -941,7 +941,23 @@ static u8 pmac_ide_cable_detect(ide_hwif
return ATA_CBL_PATA40;
}

+static void pmac_ide_init_dev(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ pmac_ide_hwif_t *pmif =
+ (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
+
+ if (pmif->mediabay) {
+#ifdef CONFIG_PMAC_MEDIABAY
+ if (check_media_bay(pmif->node->parent, MB_CD) == -ENODEV)
+ return;
+#endif
+ drive->noprobe = 1;
+ }
+}
+
static const struct ide_port_ops pmac_ide_ata6_port_ops = {
+ .init_dev = pmac_ide_init_dev,
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
.selectproc = pmac_ide_kauai_selectproc,
@@ -949,6 +965,7 @@ static const struct ide_port_ops pmac_id
};

static const struct ide_port_ops pmac_ide_ata4_port_ops = {
+ .init_dev = pmac_ide_init_dev,
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
.selectproc = pmac_ide_selectproc,
@@ -956,6 +973,7 @@ static const struct ide_port_ops pmac_id
};

static const struct ide_port_ops pmac_ide_port_ops = {
+ .init_dev = pmac_ide_init_dev,
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
.selectproc = pmac_ide_selectproc,
@@ -1065,15 +1083,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *p
hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
pmif->mediabay ? " (mediabay)" : "", hwif->irq);

- if (pmif->mediabay) {
-#ifdef CONFIG_PMAC_MEDIABAY
- if (check_media_bay(np->parent, MB_CD) == -ENODEV)
- break;
-#endif
- hwif->drives[0].noprobe = 1;
- hwif->drives[1].noprobe = 1;
- }
-
idx[0] = hwif->index;

ide_device_add(idx, &d);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/