Re: [linux-pm] [PATCH 0/4] Fix forcedeth hibernate/wake-on-lanproblems

[Alan Stern]

On Sun, 1 Jun 2008, Tobias Diedrich wrote:

> > > (BTW I first thought the 'immediate reboot because of usb wake' effect is
> > > caused by the optical mouse generating a wake event, but it rather
> > > seems to be a problem with a flaky secondary usb host controller,
> > > which sees a connected device where nothing is attached)
> > 
> > Can you provide debugging information (i.e., CONFIG_USB_DEBUG) with the 
> > details on this bogus wakeup?
> 
> Sure.
> Here is the complete log of one boot and two s2disk_platform cycles
> captured using the serial console (in the first s2disk I forgot to
> remove the 'turn off /sys/bus/usb/device/usb?/power/wakeup' part).
> 
> Interestingly even with power/wakeup disabled for usb1 and usb2,
> which I assume to be the usb root ports, I could wake up the system
> by pressing a key on my keyboard (which didn't work before turning
> on CONFIG_USB_SUSPEND).
> 
> On the second suspend the system rebooted immediately as expected
> (I power/wakeup for usb1 and usb2 back on and disabled the part in
> the script).
> 
> I think this might be some general usb hw flakiness, since it seems
> to detect (and has so for a long time) a non-existing device:
> 
> lsusb output:
> Bus 002 Device 003: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0
> Bus 002 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
> Bus 002 Device 001: ID 1d6b:0001  
> Bus 001 Device 001: ID 1d6b:0002  
> 
> bogus device?:
> [14316046.469949] usb 2-4: new full speed USB device using ohci_hcd and address 12
> [14316046.679951] usb 2-4: device descriptor read/64, error -62
> [14316046.986619] usb 2-4: device descriptor read/64, error -62
> [14316047.263284] usb 2-4: new full speed USB device using ohci_hcd and address 13
> [14316047.476614] usb 2-4: device descriptor read/64, error -62
> [14316047.786618] usb 2-4: device descriptor read/64, error -62
> [14316048.063282] usb 2-4: new full speed USB device using ohci_hcd and address 14
> [14316048.499945] usb 2-4: device not accepting address 14, error -62
> [14316048.669950] usb 2-4: new full speed USB device using ohci_hcd and address 15
> [14316049.106612] usb 2-4: device not accepting address 15, error -62
> [14316049.112960] hub 2-0:1.0: unable to enumerate USB device on port 4

It's possible.  Maybe there's a builtin broken USB device, or maybe the 
D+ pin on port 4 is wired to a positive voltage source.

The log didn't reveal anything.  Perhaps you can learn more by looking 
at the "registers" file for that OHCI controller in debugfs.

Also, you should run "lspci -vv" as root to see what wakeup signals the 
USB controllers are issuing.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/