Re: 2.6.25.x: Wrong CPU frequency (cpufreq table) with p4-clockmod

[Roger Heflin]

Arjan van de Ven wrote:
> On Sun, 1 Jun 2008 23:57:14 +0200
> Guntsche Michael <mike@xxxxxxxxxxxx> wrote:
>
> > On May 30, 2008, at 16:07, Guntsche Michael wrote:
> >
> > > I am most interested in keeping the temperature of my CPU down,  
> > > which means slower fans, which means less noise.
> > > The main "problem" I have is that I do not know if this is a
> > > simple display issue or if I am having a more fundamental problem
> > > here.
> > Just FYI I found out the cause of my problem.
> >
> > Reverting
> > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=ed9cbcd40004904dbe61ccc16d6106a7de38c998
> > this patch resultsin the correct numbers for me.
> >
> > <cpuinfo snip>
> > processor	: 0
> > vendor_id	: GenuineIntel
> > cpu family	: 15
> > model		: 1
> > model name	: Intel(R) Pentium(R) 4 CPU 1.70GHz
> > stepping	: 2
> > cpu MHz		: 637.500
> > <snip>
> >
> > This patch was reverted because other people seem to have problems  
> > with it, reverting the revert does not look like a good idea either.
> > But since I know now, that this is just a "display" problem and  
> > everything is working otherwise, I'll just patch this locally for my  
> > machine here.
>
> just as a side note.. you do realize that with p4-clockmod, your cpu is
> still running at 1.7 GHz right? (it's just doing less work '-)

From my testing, I believe the only thing that p4-clockmod does is forces an 
idle call when it could otherwise do work on an active process, so fullspeed and 
idle uses *EXACTLY* the same amount of power as p4-clockmod slower speed and 
idle (and therefore generates exactly the same amount of heat), the only power 
difference would be that if you were using p4-clockmod to slow down the cpu when 
it had an active running process (force the cpu to be idle a lot of the time 
even though it has work).   Arjan's point is that if you are using  p4-clockmod 
to slow down an idle cpu in hopes of saving power when the cpu is not being 
used, then it is not going to make *ANY* difference in the power usage at all.

I tried it on my p4 here, and cannot see any power difference in idle/fullspeed 
and idle/slowspeed, this is unlike the later power saving stuff that actually 
does slow down the cpu frequency, and you can measure a different amount of 
power usage with the different clock speeds and an idle cpu.

                                   Roger
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/