[git patches] net driver updates .27
From: Jeff Garzik
Date: Fri May 30 2008 - 22:27:27 EST
Please pull from 'davem-next' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git davem-next
to receive the following updates:
Documentation/powerpc/booting-without-of.txt | 21 +
drivers/net/Kconfig | 4 +-
drivers/net/forcedeth.c | 61 +-
drivers/net/fs_enet/fs_enet-main.c | 31 +-
drivers/net/myri10ge/myri10ge.c | 1076 ++++++++++++++++++++------
drivers/net/ns83820.c | 9 +-
drivers/net/phy/Kconfig | 6 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-ofgpio.c | 205 +++++
drivers/net/ps3_gelic_net.c | 10 +-
drivers/net/ps3_gelic_net.h | 2 +-
drivers/net/ps3_gelic_wireless.c | 40 +-
drivers/net/ps3_gelic_wireless.h | 4 +-
drivers/net/s2io.c | 2 +-
drivers/net/sfc/Kconfig | 2 +
drivers/net/sfc/Makefile | 2 +-
drivers/net/sfc/boards.c | 2 +-
drivers/net/sfc/boards.h | 3 +-
drivers/net/sfc/efx.c | 2 +
drivers/net/sfc/falcon.c | 74 ++-
drivers/net/sfc/i2c-direct.c | 381 ---------
drivers/net/sfc/i2c-direct.h | 91 ---
drivers/net/sfc/net_driver.h | 11 +-
drivers/net/sfc/sfe4001.c | 126 ++--
drivers/net/sky2.c | 173 ++++-
drivers/net/sky2.h | 23 +-
drivers/net/tlan.c | 490 ++++++------
drivers/net/tlan.h | 26 +-
drivers/net/tsi108_eth.c | 6 +-
29 files changed, 1749 insertions(+), 1135 deletions(-)
create mode 100644 drivers/net/phy/mdio-ofgpio.c
delete mode 100644 drivers/net/sfc/i2c-direct.c
delete mode 100644 drivers/net/sfc/i2c-direct.h
Ben Hutchings (2):
sfc: Use kernel I2C system and i2c-algo-bit driver
sfc: Reduce I2C udelay to 5 resulting in a clock frequency of 100 kHz
Brice Goglin (3):
myri10ge: add routines for multislices
myri10ge: add multislices support
myri10ge: add Direct Cache Access support
Daniel Walker (3):
ps3: gelic: scan_lock semaphore to mutex
ps3: gelic: assoc_stat_lock semaphore to mutex
ps3: gelic: updown_lock semaphore to mutex
Laurent Pinchart (2):
net: OpenFirmware GPIO based MDIO bitbang driver
fs_enet: MDIO on GPIO support
Marcin Slusarz (1):
net/s2io: set_rxd_buffer_pointer returns -ENOMEM, not ENOMEM
Randy Dunlap (1):
cxgb3: fix build error when INET=n
Stephen Hemminger (12):
tlan: get rid of padding buffer
tlan: use netdevice stats
tlan: remove unused devName field
tlan: 64bit conversion
tlan: manage rx allocation failure better
tlan: proper shared IRQ support
tlan: wrap source lines
sky2: split phy power into two functions
sky2: put PHY in sleep when down
sky2: pci power savings
ts108: use netdev_alloc_skb
ns8320: use netdev_alloc_skb
Tobias Diedrich (3):
[netdrvr] forcedeth: setup wake-on-lan before shutting down
[netdrvr] forcedeth: save/restore device configuration space
[netdrvr] forcedeth: reorder suspend/resume code
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 1d2a772..46a9dba 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -58,6 +58,7 @@ Table of Contents
o) Xilinx IP cores
p) Freescale Synchronous Serial Interface
q) USB EHCI controllers
+ r) MDIO on GPIOs
VII - Marvell Discovery mv64[345]6x System Controller chips
1) The /system-controller node
@@ -2870,6 +2871,26 @@ platforms are moved over to use the flattened-device-tree model.
reg = <0xe8000000 32>;
};
+ r) MDIO on GPIOs
+
+ Currently defined compatibles:
+ - virtual,gpio-mdio
+
+ MDC and MDIO lines connected to GPIO controllers are listed in the
+ gpios property as described in section VIII.1 in the following order:
+
+ MDC, MDIO.
+
+ Example:
+
+ mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qe_pio_a 11
+ &qe_pio_c 6>;
+ };
+
VII - Marvell Discovery mv64[345]6x System Controller chips
===========================================================
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8178a4d..d415d81 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1670,7 +1670,7 @@ config SUNDANCE_MMIO
config TLAN
tristate "TI ThunderLAN support"
- depends on NET_PCI && (PCI || EISA) && !64BIT
+ depends on NET_PCI && (PCI || EISA)
---help---
If you have a PCI Ethernet network card based on the ThunderLAN chip
which is supported by this driver, say Y and read the
@@ -2408,7 +2408,7 @@ config CHELSIO_T1_NAPI
config CHELSIO_T3
tristate "Chelsio Communications T3 10Gb Ethernet support"
- depends on PCI
+ depends on PCI && INET
select FW_LOADER
select INET_LRO
help
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 9eca97f..e4d6978 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -426,6 +426,7 @@ union ring_type {
#define NV_PCI_REGSZ_VER1 0x270
#define NV_PCI_REGSZ_VER2 0x2d4
#define NV_PCI_REGSZ_VER3 0x604
+#define NV_PCI_REGSZ_MAX 0x604
/* various timeout delays: all in usec */
#define NV_TXRX_RESET_DELAY 4
@@ -784,6 +785,9 @@ struct fe_priv {
/* flow control */
u32 pause_flags;
+
+ /* power saved state */
+ u32 saved_config_space[NV_PCI_REGSZ_MAX/4];
};
/*
@@ -5785,50 +5789,66 @@ static int nv_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct fe_priv *np = netdev_priv(dev);
+ u8 __iomem *base = get_hwbase(dev);
+ int i;
- if (!netif_running(dev))
- goto out;
-
+ if (netif_running(dev)) {
+ // Gross.
+ nv_close(dev);
+ }
netif_device_detach(dev);
- // Gross.
- nv_close(dev);
+ /* save non-pci configuration space */
+ for (i = 0;i <= np->register_size/sizeof(u32); i++)
+ np->saved_config_space[i] = readl(base + i*sizeof(u32));
pci_save_state(pdev);
pci_enable_wake(pdev, pci_choose_state(pdev, state), np->wolenabled);
+ pci_disable_device(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
-out:
return 0;
}
static int nv_resume(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
+ struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
- int rc = 0;
- u32 txreg;
-
- if (!netif_running(dev))
- goto out;
-
- netif_device_attach(dev);
+ int i, rc = 0;
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
+ /* ack any pending wake events, disable PME */
pci_enable_wake(pdev, PCI_D0, 0);
- /* restore mac address reverse flag */
- txreg = readl(base + NvRegTransmitPoll);
- txreg |= NVREG_TRANSMITPOLL_MAC_ADDR_REV;
- writel(txreg, base + NvRegTransmitPoll);
+ /* restore non-pci configuration space */
+ for (i = 0;i <= np->register_size/sizeof(u32); i++)
+ writel(np->saved_config_space[i], base+i*sizeof(u32));
- rc = nv_open(dev);
- nv_set_multicast(dev);
-out:
+ netif_device_attach(dev);
+ if (netif_running(dev)) {
+ rc = nv_open(dev);
+ nv_set_multicast(dev);
+ }
return rc;
}
+
+static void nv_shutdown(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct fe_priv *np = netdev_priv(dev);
+
+ if (netif_running(dev))
+ nv_close(dev);
+
+ pci_enable_wake(pdev, PCI_D3hot, np->wolenabled);
+ pci_enable_wake(pdev, PCI_D3cold, np->wolenabled);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+}
#else
#define nv_suspend NULL
+#define nv_shutdown NULL
#define nv_resume NULL
#endif /* CONFIG_PM */
@@ -5999,6 +6019,7 @@ static struct pci_driver driver = {
.remove = __devexit_p(nv_remove),
.suspend = nv_suspend,
.resume = nv_resume,
+ .shutdown = nv_shutdown,
};
static int __init init_nic(void)
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index a5baaf5..fb7c477 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -43,6 +43,7 @@
#include <asm/uaccess.h>
#ifdef CONFIG_PPC_CPM_NEW_BINDING
+#include <linux/of_gpio.h>
#include <asm/of_platform.h>
#endif
@@ -1172,8 +1173,7 @@ static int __devinit find_phy(struct device_node *np,
struct fs_platform_info *fpi)
{
struct device_node *phynode, *mdionode;
- struct resource res;
- int ret = 0, len;
+ int ret = 0, len, bus_id;
const u32 *data;
data = of_get_property(np, "fixed-link", NULL);
@@ -1190,19 +1190,28 @@ static int __devinit find_phy(struct device_node *np,
if (!phynode)
return -EINVAL;
- mdionode = of_get_parent(phynode);
- if (!mdionode)
+ data = of_get_property(phynode, "reg", &len);
+ if (!data || len != 4) {
+ ret = -EINVAL;
goto out_put_phy;
+ }
- ret = of_address_to_resource(mdionode, 0, &res);
- if (ret)
- goto out_put_mdio;
+ mdionode = of_get_parent(phynode);
+ if (!mdionode) {
+ ret = -EINVAL;
+ goto out_put_phy;
+ }
- data = of_get_property(phynode, "reg", &len);
- if (!data || len != 4)
- goto out_put_mdio;
+ bus_id = of_get_gpio(mdionode, 0);
+ if (bus_id < 0) {
+ struct resource res;
+ ret = of_address_to_resource(mdionode, 0, &res);
+ if (ret)
+ goto out_put_mdio;
+ bus_id = res.start;
+ }
- snprintf(fpi->bus_id, 16, "%x:%02x", res.start, *data);
+ snprintf(fpi->bus_id, 16, "%x:%02x", bus_id, *data);
out_put_mdio:
of_node_put(mdionode);
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 36be6ef..93007d3 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -49,6 +49,7 @@
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/inet_lro.h>
+#include <linux/dca.h>
#include <linux/ip.h>
#include <linux/inet.h>
#include <linux/in.h>
@@ -185,11 +186,18 @@ struct myri10ge_slice_state {
dma_addr_t fw_stats_bus;
int watchdog_tx_done;
int watchdog_tx_req;
+#ifdef CONFIG_DCA
+ int cached_dca_tag;
+ int cpu;
+ __be32 __iomem *dca_tag;
+#endif
+ char irq_desc[32];
};
struct myri10ge_priv {
- struct myri10ge_slice_state ss;
+ struct myri10ge_slice_state *ss;
int tx_boundary; /* boundary transmits cannot cross */
+ int num_slices;
int running; /* running? */
int csum_flag; /* rx_csums? */
int small_bytes;
@@ -208,6 +216,11 @@ struct myri10ge_priv {
dma_addr_t cmd_bus;
struct pci_dev *pdev;
int msi_enabled;
+ int msix_enabled;
+ struct msix_entry *msix_vectors;
+#ifdef CONFIG_DCA
+ int dca_enabled;
+#endif
u32 link_state;
unsigned int rdma_tags_available;
int intr_coal_delay;
@@ -244,6 +257,8 @@ struct myri10ge_priv {
static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
static char *myri10ge_fw_aligned = "myri10ge_eth_z8e.dat";
+static char *myri10ge_fw_rss_unaligned = "myri10ge_rss_ethp_z8e.dat";
+static char *myri10ge_fw_rss_aligned = "myri10ge_rss_eth_z8e.dat";
static char *myri10ge_fw_name = NULL;
module_param(myri10ge_fw_name, charp, S_IRUGO | S_IWUSR);
@@ -321,6 +336,18 @@ static int myri10ge_wcfifo = 0;
module_param(myri10ge_wcfifo, int, S_IRUGO);
MODULE_PARM_DESC(myri10ge_wcfifo, "Enable WC Fifo when WC is enabled");
+static int myri10ge_max_slices = 1;
+module_param(myri10ge_max_slices, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_max_slices, "Max tx/rx queues");
+
+static int myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
+module_param(myri10ge_rss_hash, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_rss_hash, "Type of RSS hashing to do");
+
+static int myri10ge_dca = 1;
+module_param(myri10ge_dca, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_dca, "Enable DCA if possible");
+
#define MYRI10GE_FW_OFFSET 1024*1024
#define MYRI10GE_HIGHPART_TO_U32(X) \
(sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
@@ -657,7 +684,7 @@ static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
return 0;
}
-static int myri10ge_load_firmware(struct myri10ge_priv *mgp)
+static int myri10ge_load_firmware(struct myri10ge_priv *mgp, int adopt)
{
char __iomem *submit;
__be32 buf[16] __attribute__ ((__aligned__(8)));
@@ -667,6 +694,8 @@ static int myri10ge_load_firmware(struct myri10ge_priv *mgp)
size = 0;
status = myri10ge_load_hotplug_firmware(mgp, &size);
if (status) {
+ if (!adopt)
+ return status;
dev_warn(&mgp->pdev->dev, "hotplug firmware loading failed\n");
/* Do not attempt to adopt firmware if there
@@ -859,8 +888,12 @@ abort:
static int myri10ge_reset(struct myri10ge_priv *mgp)
{
struct myri10ge_cmd cmd;
- int status;
+ struct myri10ge_slice_state *ss;
+ int i, status;
size_t bytes;
+#ifdef CONFIG_DCA
+ unsigned long dca_tag_off;
+#endif
/* try to send a reset command to the card to see if it
* is alive */
@@ -872,20 +905,74 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
}
(void)myri10ge_dma_test(mgp, MXGEFW_DMA_TEST);
+ /*
+ * Use non-ndis mcp_slot (eg, 4 bytes total,
+ * no toeplitz hash value returned. Older firmware will
+ * not understand this command, but will use the correct
+ * sized mcp_slot, so we ignore error returns
+ */
+ cmd.data0 = MXGEFW_RSS_MCP_SLOT_TYPE_MIN;
+ (void)myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE, &cmd, 0);
/* Now exchange information about interrupts */
- bytes = mgp->max_intr_slots * sizeof(*mgp->ss.rx_done.entry);
- memset(mgp->ss.rx_done.entry, 0, bytes);
+ bytes = mgp->max_intr_slots * sizeof(*mgp->ss[0].rx_done.entry);
cmd.data0 = (u32) bytes;
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
- cmd.data0 = MYRI10GE_LOWPART_TO_U32(mgp->ss.rx_done.bus);
- cmd.data1 = MYRI10GE_HIGHPART_TO_U32(mgp->ss.rx_done.bus);
- status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_DMA, &cmd, 0);
+
+ /*
+ * Even though we already know how many slices are supported
+ * via myri10ge_probe_slices() MXGEFW_CMD_GET_MAX_RSS_QUEUES
+ * has magic side effects, and must be called after a reset.
+ * It must be called prior to calling any RSS related cmds,
+ * including assigning an interrupt queue for anything but
+ * slice 0. It must also be called *after*
+ * MXGEFW_CMD_SET_INTRQ_SIZE, since the intrq size is used by
+ * the firmware to compute offsets.
+ */
+
+ if (mgp->num_slices > 1) {
+
+ /* ask the maximum number of slices it supports */
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES,
+ &cmd, 0);
+ if (status != 0) {
+ dev_err(&mgp->pdev->dev,
+ "failed to get number of slices\n");
+ }
+
+ /*
+ * MXGEFW_CMD_ENABLE_RSS_QUEUES must be called prior
+ * to setting up the interrupt queue DMA
+ */
+
+ cmd.data0 = mgp->num_slices;
+ cmd.data1 = 1; /* use MSI-X */
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
+ &cmd, 0);
+ if (status != 0) {
+ dev_err(&mgp->pdev->dev,
+ "failed to set number of slices\n");
+
+ return status;
+ }
+ }
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = &mgp->ss[i];
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->rx_done.bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->rx_done.bus);
+ cmd.data2 = i;
+ status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_DMA,
+ &cmd, 0);
+ };
status |=
myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_ACK_OFFSET, &cmd, 0);
- mgp->ss.irq_claim = (__iomem __be32 *) (mgp->sram + cmd.data0);
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = &mgp->ss[i];
+ ss->irq_claim =
+ (__iomem __be32 *) (mgp->sram + cmd.data0 + 8 * i);
+ }
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
&cmd, 0);
mgp->irq_deassert = (__iomem __be32 *) (mgp->sram + cmd.data0);
@@ -899,24 +986,116 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
}
put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
- memset(mgp->ss.rx_done.entry, 0, bytes);
+#ifdef CONFIG_DCA
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_DCA_OFFSET, &cmd, 0);
+ dca_tag_off = cmd.data0;
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = &mgp->ss[i];
+ if (status == 0) {
+ ss->dca_tag = (__iomem __be32 *)
+ (mgp->sram + dca_tag_off + 4 * i);
+ } else {
+ ss->dca_tag = NULL;
+ }
+ }
+#endif /* CONFIG_DCA */
/* reset mcp/driver shared state back to 0 */
- mgp->ss.tx.req = 0;
- mgp->ss.tx.done = 0;
- mgp->ss.tx.pkt_start = 0;
- mgp->ss.tx.pkt_done = 0;
- mgp->ss.rx_big.cnt = 0;
- mgp->ss.rx_small.cnt = 0;
- mgp->ss.rx_done.idx = 0;
- mgp->ss.rx_done.cnt = 0;
+
mgp->link_changes = 0;
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = &mgp->ss[i];
+
+ memset(ss->rx_done.entry, 0, bytes);
+ ss->tx.req = 0;
+ ss->tx.done = 0;
+ ss->tx.pkt_start = 0;
+ ss->tx.pkt_done = 0;
+ ss->rx_big.cnt = 0;
+ ss->rx_small.cnt = 0;
+ ss->rx_done.idx = 0;
+ ss->rx_done.cnt = 0;
+ ss->tx.wake_queue = 0;
+ ss->tx.stop_queue = 0;
+ }
+
status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
myri10ge_change_pause(mgp, mgp->pause);
myri10ge_set_multicast_list(mgp->dev);
return status;
}
+#ifdef CONFIG_DCA
+static void
+myri10ge_write_dca(struct myri10ge_slice_state *ss, int cpu, int tag)
+{
+ ss->cpu = cpu;
+ ss->cached_dca_tag = tag;
+ put_be32(htonl(tag), ss->dca_tag);
+}
+
+static inline void myri10ge_update_dca(struct myri10ge_slice_state *ss)
+{
+ int cpu = get_cpu();
+ int tag;
+
+ if (cpu != ss->cpu) {
+ tag = dca_get_tag(cpu);
+ if (ss->cached_dca_tag != tag)
+ myri10ge_write_dca(ss, cpu, tag);
+ }
+ put_cpu();
+}
+
+static void myri10ge_setup_dca(struct myri10ge_priv *mgp)
+{
+ int err, i;
+ struct pci_dev *pdev = mgp->pdev;
+
+ if (mgp->ss[0].dca_tag == NULL || mgp->dca_enabled)
+ return;
+ if (!myri10ge_dca) {
+ dev_err(&pdev->dev, "dca disabled by administrator\n");
+ return;
+ }
+ err = dca_add_requester(&pdev->dev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "dca_add_requester() failed, err=%d\n", err);
+ return;
+ }
+ mgp->dca_enabled = 1;
+ for (i = 0; i < mgp->num_slices; i++)
+ myri10ge_write_dca(&mgp->ss[i], -1, 0);
+}
+
+static void myri10ge_teardown_dca(struct myri10ge_priv *mgp)
+{
+ struct pci_dev *pdev = mgp->pdev;
+ int err;
+
+ if (!mgp->dca_enabled)
+ return;
+ mgp->dca_enabled = 0;
+ err = dca_remove_requester(&pdev->dev);
+}
+
+static int myri10ge_notify_dca_device(struct device *dev, void *data)
+{
+ struct myri10ge_priv *mgp;
+ unsigned long event;
+
+ mgp = dev_get_drvdata(dev);
+ event = *(unsigned long *)data;
+
+ if (event == DCA_PROVIDER_ADD)
+ myri10ge_setup_dca(mgp);
+ else if (event == DCA_PROVIDER_REMOVE)
+ myri10ge_teardown_dca(mgp);
+ return 0;
+}
+#endif /* CONFIG_DCA */
+
static inline void
myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem * dst,
struct mcp_kreq_ether_recv *src)
@@ -1095,9 +1274,10 @@ myri10ge_rx_done(struct myri10ge_slice_state *ss, struct myri10ge_rx_buf *rx,
rx_frags[0].size -= MXGEFW_PAD;
len -= MXGEFW_PAD;
lro_receive_frags(&ss->rx_done.lro_mgr, rx_frags,
- len, len,
/* opaque, will come back in get_frag_header */
+ len, len,
(void *)(__force unsigned long)csum, csum);
+
return 1;
}
@@ -1236,7 +1416,7 @@ myri10ge_clean_rx_done(struct myri10ge_slice_state *ss, int budget)
static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
{
- struct mcp_irq_data *stats = mgp->ss.fw_stats;
+ struct mcp_irq_data *stats = mgp->ss[0].fw_stats;
if (unlikely(stats->stats_updated)) {
unsigned link_up = ntohl(stats->link_up);
@@ -1283,6 +1463,11 @@ static int myri10ge_poll(struct napi_struct *napi, int budget)
struct net_device *netdev = ss->mgp->dev;
int work_done;
+#ifdef CONFIG_DCA
+ if (ss->mgp->dca_enabled)
+ myri10ge_update_dca(ss);
+#endif
+
/* process as many rx events as NAPI will allow */
work_done = myri10ge_clean_rx_done(ss, budget);
@@ -1302,6 +1487,13 @@ static irqreturn_t myri10ge_intr(int irq, void *arg)
u32 send_done_count;
int i;
+ /* an interrupt on a non-zero slice is implicitly valid
+ * since MSI-X irqs are not shared */
+ if (ss != mgp->ss) {
+ netif_rx_schedule(ss->dev, &ss->napi);
+ return (IRQ_HANDLED);
+ }
+
/* make sure it is our IRQ, and that the DMA has finished */
if (unlikely(!stats->valid))
return (IRQ_NONE);
@@ -1311,7 +1503,7 @@ static irqreturn_t myri10ge_intr(int irq, void *arg)
if (stats->valid & 1)
netif_rx_schedule(ss->dev, &ss->napi);
- if (!mgp->msi_enabled) {
+ if (!mgp->msi_enabled && !mgp->msix_enabled) {
put_be32(0, mgp->irq_deassert);
if (!myri10ge_deassert_wait)
stats->valid = 0;
@@ -1446,10 +1638,10 @@ myri10ge_get_ringparam(struct net_device *netdev,
{
struct myri10ge_priv *mgp = netdev_priv(netdev);
- ring->rx_mini_max_pending = mgp->ss.rx_small.mask + 1;
- ring->rx_max_pending = mgp->ss.rx_big.mask + 1;
+ ring->rx_mini_max_pending = mgp->ss[0].rx_small.mask + 1;
+ ring->rx_max_pending = mgp->ss[0].rx_big.mask + 1;
ring->rx_jumbo_max_pending = 0;
- ring->tx_max_pending = mgp->ss.rx_small.mask + 1;
+ ring->tx_max_pending = mgp->ss[0].rx_small.mask + 1;
ring->rx_mini_pending = ring->rx_mini_max_pending;
ring->rx_pending = ring->rx_max_pending;
ring->rx_jumbo_pending = ring->rx_jumbo_max_pending;
@@ -1497,9 +1689,12 @@ static const char myri10ge_gstrings_main_stats[][ETH_GSTRING_LEN] = {
"tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
"tx_heartbeat_errors", "tx_window_errors",
/* device-specific stats */
- "tx_boundary", "WC", "irq", "MSI",
+ "tx_boundary", "WC", "irq", "MSI", "MSIX",
"read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
"serial_number", "watchdog_resets",
+#ifdef CONFIG_DCA
+ "dca_capable", "dca_enabled",
+#endif
"link_changes", "link_up", "dropped_link_overflow",
"dropped_link_error_or_filtered",
"dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
@@ -1524,23 +1719,31 @@ static const char myri10ge_gstrings_slice_stats[][ETH_GSTRING_LEN] = {
static void
myri10ge_get_strings(struct net_device *netdev, u32 stringset, u8 * data)
{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+ int i;
+
switch (stringset) {
case ETH_SS_STATS:
memcpy(data, *myri10ge_gstrings_main_stats,
sizeof(myri10ge_gstrings_main_stats));
data += sizeof(myri10ge_gstrings_main_stats);
- memcpy(data, *myri10ge_gstrings_slice_stats,
- sizeof(myri10ge_gstrings_slice_stats));
- data += sizeof(myri10ge_gstrings_slice_stats);
+ for (i = 0; i < mgp->num_slices; i++) {
+ memcpy(data, *myri10ge_gstrings_slice_stats,
+ sizeof(myri10ge_gstrings_slice_stats));
+ data += sizeof(myri10ge_gstrings_slice_stats);
+ }
break;
}
}
static int myri10ge_get_sset_count(struct net_device *netdev, int sset)
{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+
switch (sset) {
case ETH_SS_STATS:
- return MYRI10GE_MAIN_STATS_LEN + MYRI10GE_SLICE_STATS_LEN;
+ return MYRI10GE_MAIN_STATS_LEN +
+ mgp->num_slices * MYRI10GE_SLICE_STATS_LEN;
default:
return -EOPNOTSUPP;
}
@@ -1552,6 +1755,7 @@ myri10ge_get_ethtool_stats(struct net_device *netdev,
{
struct myri10ge_priv *mgp = netdev_priv(netdev);
struct myri10ge_slice_state *ss;
+ int slice;
int i;
for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
@@ -1561,15 +1765,20 @@ myri10ge_get_ethtool_stats(struct net_device *netdev,
data[i++] = (unsigned int)mgp->wc_enabled;
data[i++] = (unsigned int)mgp->pdev->irq;
data[i++] = (unsigned int)mgp->msi_enabled;
+ data[i++] = (unsigned int)mgp->msix_enabled;
data[i++] = (unsigned int)mgp->read_dma;
data[i++] = (unsigned int)mgp->write_dma;
data[i++] = (unsigned int)mgp->read_write_dma;
data[i++] = (unsigned int)mgp->serial_number;
data[i++] = (unsigned int)mgp->watchdog_resets;
+#ifdef CONFIG_DCA
+ data[i++] = (unsigned int)(mgp->ss[0].dca_tag != NULL);
+ data[i++] = (unsigned int)(mgp->dca_enabled);
+#endif
data[i++] = (unsigned int)mgp->link_changes;
/* firmware stats are useful only in the first slice */
- ss = &mgp->ss;
+ ss = &mgp->ss[0];
data[i++] = (unsigned int)ntohl(ss->fw_stats->link_up);
data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_link_overflow);
data[i++] =
@@ -1585,24 +1794,27 @@ myri10ge_get_ethtool_stats(struct net_device *netdev,
data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_small_buffer);
data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_big_buffer);
- data[i++] = 0;
- data[i++] = (unsigned int)ss->tx.pkt_start;
- data[i++] = (unsigned int)ss->tx.pkt_done;
- data[i++] = (unsigned int)ss->tx.req;
- data[i++] = (unsigned int)ss->tx.done;
- data[i++] = (unsigned int)ss->rx_small.cnt;
- data[i++] = (unsigned int)ss->rx_big.cnt;
- data[i++] = (unsigned int)ss->tx.wake_queue;
- data[i++] = (unsigned int)ss->tx.stop_queue;
- data[i++] = (unsigned int)ss->tx.linearized;
- data[i++] = ss->rx_done.lro_mgr.stats.aggregated;
- data[i++] = ss->rx_done.lro_mgr.stats.flushed;
- if (ss->rx_done.lro_mgr.stats.flushed)
- data[i++] = ss->rx_done.lro_mgr.stats.aggregated /
- ss->rx_done.lro_mgr.stats.flushed;
- else
- data[i++] = 0;
- data[i++] = ss->rx_done.lro_mgr.stats.no_desc;
+ for (slice = 0; slice < mgp->num_slices; slice++) {
+ ss = &mgp->ss[slice];
+ data[i++] = slice;
+ data[i++] = (unsigned int)ss->tx.pkt_start;
+ data[i++] = (unsigned int)ss->tx.pkt_done;
+ data[i++] = (unsigned int)ss->tx.req;
+ data[i++] = (unsigned int)ss->tx.done;
+ data[i++] = (unsigned int)ss->rx_small.cnt;
+ data[i++] = (unsigned int)ss->rx_big.cnt;
+ data[i++] = (unsigned int)ss->tx.wake_queue;
+ data[i++] = (unsigned int)ss->tx.stop_queue;
+ data[i++] = (unsigned int)ss->tx.linearized;
+ data[i++] = ss->rx_done.lro_mgr.stats.aggregated;
+ data[i++] = ss->rx_done.lro_mgr.stats.flushed;
+ if (ss->rx_done.lro_mgr.stats.flushed)
+ data[i++] = ss->rx_done.lro_mgr.stats.aggregated /
+ ss->rx_done.lro_mgr.stats.flushed;
+ else
+ data[i++] = 0;
+ data[i++] = ss->rx_done.lro_mgr.stats.no_desc;
+ }
}
static void myri10ge_set_msglevel(struct net_device *netdev, u32 value)
@@ -1645,12 +1857,15 @@ static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
struct net_device *dev = mgp->dev;
int tx_ring_size, rx_ring_size;
int tx_ring_entries, rx_ring_entries;
- int i, status;
+ int i, slice, status;
size_t bytes;
/* get ring sizes */
+ slice = ss - mgp->ss;
+ cmd.data0 = slice;
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_RING_SIZE, &cmd, 0);
tx_ring_size = cmd.data0;
+ cmd.data0 = slice;
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
if (status != 0)
return status;
@@ -1715,15 +1930,17 @@ static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
mgp->small_bytes + MXGEFW_PAD, 0);
if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
- printk(KERN_ERR "myri10ge: %s: alloced only %d small bufs\n",
- dev->name, ss->rx_small.fill_cnt);
+ printk(KERN_ERR
+ "myri10ge: %s:slice-%d: alloced only %d small bufs\n",
+ dev->name, slice, ss->rx_small.fill_cnt);
goto abort_with_rx_small_ring;
}
myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
- printk(KERN_ERR "myri10ge: %s: alloced only %d big bufs\n",
- dev->name, ss->rx_big.fill_cnt);
+ printk(KERN_ERR
+ "myri10ge: %s:slice-%d: alloced only %d big bufs\n",
+ dev->name, slice, ss->rx_big.fill_cnt);
goto abort_with_rx_big_ring;
}
@@ -1775,6 +1992,10 @@ static void myri10ge_free_rings(struct myri10ge_slice_state *ss)
struct myri10ge_tx_buf *tx;
int i, len, idx;
+ /* If not allocated, skip it */
+ if (ss->tx.req_list == NULL)
+ return;
+
for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
idx = i & ss->rx_big.mask;
if (i == ss->rx_big.fill_cnt - 1)
@@ -1837,25 +2058,67 @@ static void myri10ge_free_rings(struct myri10ge_slice_state *ss)
static int myri10ge_request_irq(struct myri10ge_priv *mgp)
{
struct pci_dev *pdev = mgp->pdev;
+ struct myri10ge_slice_state *ss;
+ struct net_device *netdev = mgp->dev;
+ int i;
int status;
+ mgp->msi_enabled = 0;
+ mgp->msix_enabled = 0;
+ status = 0;
if (myri10ge_msi) {
- status = pci_enable_msi(pdev);
- if (status != 0)
- dev_err(&pdev->dev,
- "Error %d setting up MSI; falling back to xPIC\n",
- status);
- else
- mgp->msi_enabled = 1;
- } else {
- mgp->msi_enabled = 0;
+ if (mgp->num_slices > 1) {
+ status =
+ pci_enable_msix(pdev, mgp->msix_vectors,
+ mgp->num_slices);
+ if (status == 0) {
+ mgp->msix_enabled = 1;
+ } else {
+ dev_err(&pdev->dev,
+ "Error %d setting up MSI-X\n", status);
+ return status;
+ }
+ }
+ if (mgp->msix_enabled == 0) {
+ status = pci_enable_msi(pdev);
+ if (status != 0) {
+ dev_err(&pdev->dev,
+ "Error %d setting up MSI; falling back to xPIC\n",
+ status);
+ } else {
+ mgp->msi_enabled = 1;
+ }
+ }
}
- status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
- mgp->dev->name, mgp);
- if (status != 0) {
- dev_err(&pdev->dev, "failed to allocate IRQ\n");
- if (mgp->msi_enabled)
- pci_disable_msi(pdev);
+ if (mgp->msix_enabled) {
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = &mgp->ss[i];
+ snprintf(ss->irq_desc, sizeof(ss->irq_desc),
+ "%s:slice-%d", netdev->name, i);
+ status = request_irq(mgp->msix_vectors[i].vector,
+ myri10ge_intr, 0, ss->irq_desc,
+ ss);
+ if (status != 0) {
+ dev_err(&pdev->dev,
+ "slice %d failed to allocate IRQ\n", i);
+ i--;
+ while (i >= 0) {
+ free_irq(mgp->msix_vectors[i].vector,
+ &mgp->ss[i]);
+ i--;
+ }
+ pci_disable_msix(pdev);
+ return status;
+ }
+ }
+ } else {
+ status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
+ mgp->dev->name, &mgp->ss[0]);
+ if (status != 0) {
+ dev_err(&pdev->dev, "failed to allocate IRQ\n");
+ if (mgp->msi_enabled)
+ pci_disable_msi(pdev);
+ }
}
return status;
}
@@ -1863,10 +2126,18 @@ static int myri10ge_request_irq(struct myri10ge_priv *mgp)
static void myri10ge_free_irq(struct myri10ge_priv *mgp)
{
struct pci_dev *pdev = mgp->pdev;
+ int i;
- free_irq(pdev->irq, mgp);
+ if (mgp->msix_enabled) {
+ for (i = 0; i < mgp->num_slices; i++)
+ free_irq(mgp->msix_vectors[i].vector, &mgp->ss[i]);
+ } else {
+ free_irq(pdev->irq, &mgp->ss[0]);
+ }
if (mgp->msi_enabled)
pci_disable_msi(pdev);
+ if (mgp->msix_enabled)
+ pci_disable_msix(pdev);
}
static int
@@ -1928,12 +2199,82 @@ myri10ge_get_frag_header(struct skb_frag_struct *frag, void **mac_hdr,
return 0;
}
+static int myri10ge_get_txrx(struct myri10ge_priv *mgp, int slice)
+{
+ struct myri10ge_cmd cmd;
+ struct myri10ge_slice_state *ss;
+ int status;
+
+ ss = &mgp->ss[slice];
+ cmd.data0 = 0; /* single slice for now */
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET, &cmd, 0);
+ ss->tx.lanai = (struct mcp_kreq_ether_send __iomem *)
+ (mgp->sram + cmd.data0);
+
+ cmd.data0 = slice;
+ status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SMALL_RX_OFFSET,
+ &cmd, 0);
+ ss->rx_small.lanai = (struct mcp_kreq_ether_recv __iomem *)
+ (mgp->sram + cmd.data0);
+
+ cmd.data0 = slice;
+ status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd, 0);
+ ss->rx_big.lanai = (struct mcp_kreq_ether_recv __iomem *)
+ (mgp->sram + cmd.data0);
+
+ if (myri10ge_wcfifo && mgp->wc_enabled) {
+ ss->tx.wc_fifo = (u8 __iomem *)
+ mgp->sram + MXGEFW_ETH_SEND_4 + 64 * slice;
+ ss->rx_small.wc_fifo = (u8 __iomem *)
+ mgp->sram + MXGEFW_ETH_RECV_SMALL + 64 * slice;
+ ss->rx_big.wc_fifo = (u8 __iomem *)
+ mgp->sram + MXGEFW_ETH_RECV_BIG + 64 * slice;
+ } else {
+ ss->tx.wc_fifo = NULL;
+ ss->rx_small.wc_fifo = NULL;
+ ss->rx_big.wc_fifo = NULL;
+ }
+ return status;
+
+}
+
+static int myri10ge_set_stats(struct myri10ge_priv *mgp, int slice)
+{
+ struct myri10ge_cmd cmd;
+ struct myri10ge_slice_state *ss;
+ int status;
+
+ ss = &mgp->ss[slice];
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->fw_stats_bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->fw_stats_bus);
+ cmd.data2 = sizeof(struct mcp_irq_data);
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0);
+ if (status == -ENOSYS) {
+ dma_addr_t bus = ss->fw_stats_bus;
+ if (slice != 0)
+ return -EINVAL;
+ bus += offsetof(struct mcp_irq_data, send_done_count);
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus);
+ status = myri10ge_send_cmd(mgp,
+ MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,
+ &cmd, 0);
+ /* Firmware cannot support multicast without STATS_DMA_V2 */
+ mgp->fw_multicast_support = 0;
+ } else {
+ mgp->fw_multicast_support = 1;
+ }
+ return 0;
+}
+
static int myri10ge_open(struct net_device *dev)
{
+ struct myri10ge_slice_state *ss;
struct myri10ge_priv *mgp = netdev_priv(dev);
struct myri10ge_cmd cmd;
+ int i, status, big_pow2, slice;
+ u8 *itable;
struct net_lro_mgr *lro_mgr;
- int status, big_pow2;
if (mgp->running != MYRI10GE_ETH_STOPPED)
return -EBUSY;
@@ -1945,6 +2286,48 @@ static int myri10ge_open(struct net_device *dev)
goto abort_with_nothing;
}
+ if (mgp->num_slices > 1) {
+ cmd.data0 = mgp->num_slices;
+ cmd.data1 = 1; /* use MSI-X */
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
+ &cmd, 0);
+ if (status != 0) {
+ printk(KERN_ERR
+ "myri10ge: %s: failed to set number of slices\n",
+ dev->name);
+ goto abort_with_nothing;
+ }
+ /* setup the indirection table */
+ cmd.data0 = mgp->num_slices;
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_TABLE_SIZE,
+ &cmd, 0);
+
+ status |= myri10ge_send_cmd(mgp,
+ MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
+ &cmd, 0);
+ if (status != 0) {
+ printk(KERN_ERR
+ "myri10ge: %s: failed to setup rss tables\n",
+ dev->name);
+ }
+
+ /* just enable an identity mapping */
+ itable = mgp->sram + cmd.data0;
+ for (i = 0; i < mgp->num_slices; i++)
+ __raw_writeb(i, &itable[i]);
+
+ cmd.data0 = 1;
+ cmd.data1 = myri10ge_rss_hash;
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE,
+ &cmd, 0);
+ if (status != 0) {
+ printk(KERN_ERR
+ "myri10ge: %s: failed to enable slices\n",
+ dev->name);
+ goto abort_with_nothing;
+ }
+ }
+
status = myri10ge_request_irq(mgp);
if (status != 0)
goto abort_with_nothing;
@@ -1968,41 +2351,6 @@ static int myri10ge_open(struct net_device *dev)
if (myri10ge_small_bytes > 0)
mgp->small_bytes = myri10ge_small_bytes;
- /* get the lanai pointers to the send and receive rings */
-
- status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET, &cmd, 0);
- mgp->ss.tx.lanai =
- (struct mcp_kreq_ether_send __iomem *)(mgp->sram + cmd.data0);
-
- status |=
- myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SMALL_RX_OFFSET, &cmd, 0);
- mgp->ss.rx_small.lanai =
- (struct mcp_kreq_ether_recv __iomem *)(mgp->sram + cmd.data0);
-
- status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd, 0);
- mgp->ss.rx_big.lanai =
- (struct mcp_kreq_ether_recv __iomem *)(mgp->sram + cmd.data0);
-
- if (status != 0) {
- printk(KERN_ERR
- "myri10ge: %s: failed to get ring sizes or locations\n",
- dev->name);
- mgp->running = MYRI10GE_ETH_STOPPED;
- goto abort_with_irq;
- }
-
- if (myri10ge_wcfifo && mgp->wc_enabled) {
- mgp->ss.tx.wc_fifo = (u8 __iomem *) mgp->sram + MXGEFW_ETH_SEND_4;
- mgp->ss.rx_small.wc_fifo =
- (u8 __iomem *) mgp->sram + MXGEFW_ETH_RECV_SMALL;
- mgp->ss.rx_big.wc_fifo =
- (u8 __iomem *) mgp->sram + MXGEFW_ETH_RECV_BIG;
- } else {
- mgp->ss.tx.wc_fifo = NULL;
- mgp->ss.rx_small.wc_fifo = NULL;
- mgp->ss.rx_big.wc_fifo = NULL;
- }
-
/* Firmware needs the big buff size as a power of 2. Lie and
* tell him the buffer is larger, because we only use 1
* buffer/pkt, and the mtu will prevent overruns.
@@ -2017,9 +2365,44 @@ static int myri10ge_open(struct net_device *dev)
mgp->big_bytes = big_pow2;
}
- status = myri10ge_allocate_rings(&mgp->ss);
- if (status != 0)
- goto abort_with_irq;
+ /* setup the per-slice data structures */
+ for (slice = 0; slice < mgp->num_slices; slice++) {
+ ss = &mgp->ss[slice];
+
+ status = myri10ge_get_txrx(mgp, slice);
+ if (status != 0) {
+ printk(KERN_ERR
+ "myri10ge: %s: failed to get ring sizes or locations\n",
+ dev->name);
+ goto abort_with_rings;
+ }
+ status = myri10ge_allocate_rings(ss);
+ if (status != 0)
+ goto abort_with_rings;
+ if (slice == 0)
+ status = myri10ge_set_stats(mgp, slice);
+ if (status) {
+ printk(KERN_ERR
+ "myri10ge: %s: Couldn't set stats DMA\n",
+ dev->name);
+ goto abort_with_rings;
+ }
+
+ lro_mgr = &ss->rx_done.lro_mgr;
+ lro_mgr->dev = dev;
+ lro_mgr->features = LRO_F_NAPI;
+ lro_mgr->ip_summed = CHECKSUM_COMPLETE;
+ lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
+ lro_mgr->max_desc = MYRI10GE_MAX_LRO_DESCRIPTORS;
+ lro_mgr->lro_arr = ss->rx_done.lro_desc;
+ lro_mgr->get_frag_header = myri10ge_get_frag_header;
+ lro_mgr->max_aggr = myri10ge_lro_max_pkts;
+ if (lro_mgr->max_aggr > MAX_SKB_FRAGS)
+ lro_mgr->max_aggr = MAX_SKB_FRAGS;
+
+ /* must happen prior to any irq */
+ napi_enable(&(ss)->napi);
+ }
/* now give firmware buffers sizes, and MTU */
cmd.data0 = dev->mtu + ETH_HLEN + VLAN_HLEN;
@@ -2036,25 +2419,15 @@ static int myri10ge_open(struct net_device *dev)
goto abort_with_rings;
}
- cmd.data0 = MYRI10GE_LOWPART_TO_U32(mgp->ss.fw_stats_bus);
- cmd.data1 = MYRI10GE_HIGHPART_TO_U32(mgp->ss.fw_stats_bus);
- cmd.data2 = sizeof(struct mcp_irq_data);
- status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0);
- if (status == -ENOSYS) {
- dma_addr_t bus = mgp->ss.fw_stats_bus;
- bus += offsetof(struct mcp_irq_data, send_done_count);
- cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus);
- cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus);
- status = myri10ge_send_cmd(mgp,
- MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,
- &cmd, 0);
- /* Firmware cannot support multicast without STATS_DMA_V2 */
- mgp->fw_multicast_support = 0;
- } else {
- mgp->fw_multicast_support = 1;
- }
- if (status) {
- printk(KERN_ERR "myri10ge: %s: Couldn't set stats DMA\n",
+ /*
+ * Set Linux style TSO mode; this is needed only on newer
+ * firmware versions. Older versions default to Linux
+ * style TSO
+ */
+ cmd.data0 = 0;
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0);
+ if (status && status != -ENOSYS) {
+ printk(KERN_ERR "myri10ge: %s: Couldn't set TSO mode\n",
dev->name);
goto abort_with_rings;
}
@@ -2062,21 +2435,6 @@ static int myri10ge_open(struct net_device *dev)
mgp->link_state = ~0U;
mgp->rdma_tags_available = 15;
- lro_mgr = &mgp->ss.rx_done.lro_mgr;
- lro_mgr->dev = dev;
- lro_mgr->features = LRO_F_NAPI;
- lro_mgr->ip_summed = CHECKSUM_COMPLETE;
- lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
- lro_mgr->max_desc = MYRI10GE_MAX_LRO_DESCRIPTORS;
- lro_mgr->lro_arr = mgp->ss.rx_done.lro_desc;
- lro_mgr->get_frag_header = myri10ge_get_frag_header;
- lro_mgr->max_aggr = myri10ge_lro_max_pkts;
- lro_mgr->frag_align_pad = 2;
- if (lro_mgr->max_aggr > MAX_SKB_FRAGS)
- lro_mgr->max_aggr = MAX_SKB_FRAGS;
-
- napi_enable(&mgp->ss.napi); /* must happen prior to any irq */
-
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
if (status) {
printk(KERN_ERR "myri10ge: %s: Couldn't bring up link\n",
@@ -2084,8 +2442,6 @@ static int myri10ge_open(struct net_device *dev)
goto abort_with_rings;
}
- mgp->ss.tx.wake_queue = 0;
- mgp->ss.tx.stop_queue = 0;
mgp->running = MYRI10GE_ETH_RUNNING;
mgp->watchdog_timer.expires = jiffies + myri10ge_watchdog_timeout * HZ;
add_timer(&mgp->watchdog_timer);
@@ -2093,9 +2449,9 @@ static int myri10ge_open(struct net_device *dev)
return 0;
abort_with_rings:
- myri10ge_free_rings(&mgp->ss);
+ for (i = 0; i < mgp->num_slices; i++)
+ myri10ge_free_rings(&mgp->ss[i]);
-abort_with_irq:
myri10ge_free_irq(mgp);
abort_with_nothing:
@@ -2108,16 +2464,19 @@ static int myri10ge_close(struct net_device *dev)
struct myri10ge_priv *mgp = netdev_priv(dev);
struct myri10ge_cmd cmd;
int status, old_down_cnt;
+ int i;
if (mgp->running != MYRI10GE_ETH_RUNNING)
return 0;
- if (mgp->ss.tx.req_bytes == NULL)
+ if (mgp->ss[0].tx.req_bytes == NULL)
return 0;
del_timer_sync(&mgp->watchdog_timer);
mgp->running = MYRI10GE_ETH_STOPPING;
- napi_disable(&mgp->ss.napi);
+ for (i = 0; i < mgp->num_slices; i++) {
+ napi_disable(&mgp->ss[i].napi);
+ }
netif_carrier_off(dev);
netif_stop_queue(dev);
old_down_cnt = mgp->down_cnt;
@@ -2133,7 +2492,8 @@ static int myri10ge_close(struct net_device *dev)
netif_tx_disable(dev);
myri10ge_free_irq(mgp);
- myri10ge_free_rings(&mgp->ss);
+ for (i = 0; i < mgp->num_slices; i++)
+ myri10ge_free_rings(&mgp->ss[i]);
mgp->running = MYRI10GE_ETH_STOPPED;
return 0;
@@ -2254,7 +2614,7 @@ static int myri10ge_xmit(struct sk_buff *skb, struct net_device *dev)
u8 flags, odd_flag;
/* always transmit through slot 0 */
- ss = &mgp->ss;
+ ss = mgp->ss;
tx = &ss->tx;
again:
req = tx->req_list;
@@ -2559,7 +2919,21 @@ drop:
static struct net_device_stats *myri10ge_get_stats(struct net_device *dev)
{
struct myri10ge_priv *mgp = netdev_priv(dev);
- return &mgp->stats;
+ struct myri10ge_slice_netstats *slice_stats;
+ struct net_device_stats *stats = &mgp->stats;
+ int i;
+
+ memset(stats, 0, sizeof(*stats));
+ for (i = 0; i < mgp->num_slices; i++) {
+ slice_stats = &mgp->ss[i].stats;
+ stats->rx_packets += slice_stats->rx_packets;
+ stats->tx_packets += slice_stats->tx_packets;
+ stats->rx_bytes += slice_stats->rx_bytes;
+ stats->tx_bytes += slice_stats->tx_bytes;
+ stats->rx_dropped += slice_stats->rx_dropped;
+ stats->tx_dropped += slice_stats->tx_dropped;
+ }
+ return stats;
}
static void myri10ge_set_multicast_list(struct net_device *dev)
@@ -2770,10 +3144,10 @@ static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
*
* If the driver can neither enable ECRC nor verify that it has
* already been enabled, then it must use a firmware image which works
- * around unaligned completion packets (myri10ge_ethp_z8e.dat), and it
+ * around unaligned completion packets (myri10ge_rss_ethp_z8e.dat), and it
* should also ensure that it never gives the device a Read-DMA which is
* larger than 2KB by setting the tx_boundary to 2KB. If ECRC is
- * enabled, then the driver should use the aligned (myri10ge_eth_z8e.dat)
+ * enabled, then the driver should use the aligned (myri10ge_rss_eth_z8e.dat)
* firmware image, and set tx_boundary to 4KB.
*/
@@ -2802,7 +3176,7 @@ static void myri10ge_firmware_probe(struct myri10ge_priv *mgp)
* completions) in order to see if it works on this host.
*/
mgp->fw_name = myri10ge_fw_aligned;
- status = myri10ge_load_firmware(mgp);
+ status = myri10ge_load_firmware(mgp, 1);
if (status != 0) {
goto abort;
}
@@ -2983,6 +3357,7 @@ static void myri10ge_watchdog(struct work_struct *work)
struct myri10ge_tx_buf *tx;
u32 reboot;
int status;
+ int i;
u16 cmd, vendor;
mgp->watchdog_resets++;
@@ -3030,20 +3405,26 @@ static void myri10ge_watchdog(struct work_struct *work)
printk(KERN_ERR "myri10ge: %s: device timeout, resetting\n",
mgp->dev->name);
- tx = &mgp->ss.tx;
- printk(KERN_INFO "myri10ge: %s: %d %d %d %d %d\n",
- mgp->dev->name, tx->req, tx->done,
- tx->pkt_start, tx->pkt_done,
- (int)ntohl(mgp->ss.fw_stats->send_done_count));
- msleep(2000);
- printk(KERN_INFO "myri10ge: %s: %d %d %d %d %d\n",
- mgp->dev->name, tx->req, tx->done,
- tx->pkt_start, tx->pkt_done,
- (int)ntohl(mgp->ss.fw_stats->send_done_count));
+ for (i = 0; i < mgp->num_slices; i++) {
+ tx = &mgp->ss[i].tx;
+ printk(KERN_INFO
+ "myri10ge: %s: (%d): %d %d %d %d %d\n",
+ mgp->dev->name, i, tx->req, tx->done,
+ tx->pkt_start, tx->pkt_done,
+ (int)ntohl(mgp->ss[i].fw_stats->
+ send_done_count));
+ msleep(2000);
+ printk(KERN_INFO
+ "myri10ge: %s: (%d): %d %d %d %d %d\n",
+ mgp->dev->name, i, tx->req, tx->done,
+ tx->pkt_start, tx->pkt_done,
+ (int)ntohl(mgp->ss[i].fw_stats->
+ send_done_count));
+ }
}
rtnl_lock();
myri10ge_close(mgp->dev);
- status = myri10ge_load_firmware(mgp);
+ status = myri10ge_load_firmware(mgp, 1);
if (status != 0)
printk(KERN_ERR "myri10ge: %s: failed to load firmware\n",
mgp->dev->name);
@@ -3063,47 +3444,241 @@ static void myri10ge_watchdog_timer(unsigned long arg)
{
struct myri10ge_priv *mgp;
struct myri10ge_slice_state *ss;
+ int i, reset_needed;
u32 rx_pause_cnt;
mgp = (struct myri10ge_priv *)arg;
- rx_pause_cnt = ntohl(mgp->ss.fw_stats->dropped_pause);
+ rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
+ for (i = 0, reset_needed = 0;
+ i < mgp->num_slices && reset_needed == 0; ++i) {
+
+ ss = &mgp->ss[i];
+ if (ss->rx_small.watchdog_needed) {
+ myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
+ mgp->small_bytes + MXGEFW_PAD,
+ 1);
+ if (ss->rx_small.fill_cnt - ss->rx_small.cnt >=
+ myri10ge_fill_thresh)
+ ss->rx_small.watchdog_needed = 0;
+ }
+ if (ss->rx_big.watchdog_needed) {
+ myri10ge_alloc_rx_pages(mgp, &ss->rx_big,
+ mgp->big_bytes, 1);
+ if (ss->rx_big.fill_cnt - ss->rx_big.cnt >=
+ myri10ge_fill_thresh)
+ ss->rx_big.watchdog_needed = 0;
+ }
- ss = &mgp->ss;
- if (ss->rx_small.watchdog_needed) {
- myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
- mgp->small_bytes + MXGEFW_PAD, 1);
- if (ss->rx_small.fill_cnt - ss->rx_small.cnt >=
- myri10ge_fill_thresh)
- ss->rx_small.watchdog_needed = 0;
- }
- if (ss->rx_big.watchdog_needed) {
- myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 1);
- if (ss->rx_big.fill_cnt - ss->rx_big.cnt >=
- myri10ge_fill_thresh)
- ss->rx_big.watchdog_needed = 0;
- }
-
- if (ss->tx.req != ss->tx.done &&
- ss->tx.done == ss->watchdog_tx_done &&
- ss->watchdog_tx_req != ss->watchdog_tx_done) {
- /* nic seems like it might be stuck.. */
- if (rx_pause_cnt != mgp->watchdog_pause) {
- if (net_ratelimit())
- printk(KERN_WARNING "myri10ge %s:"
- "TX paused, check link partner\n",
- mgp->dev->name);
- } else {
- schedule_work(&mgp->watchdog_work);
- return;
+ if (ss->tx.req != ss->tx.done &&
+ ss->tx.done == ss->watchdog_tx_done &&
+ ss->watchdog_tx_req != ss->watchdog_tx_done) {
+ /* nic seems like it might be stuck.. */
+ if (rx_pause_cnt != mgp->watchdog_pause) {
+ if (net_ratelimit())
+ printk(KERN_WARNING "myri10ge %s:"
+ "TX paused, check link partner\n",
+ mgp->dev->name);
+ } else {
+ reset_needed = 1;
+ }
}
+ ss->watchdog_tx_done = ss->tx.done;
+ ss->watchdog_tx_req = ss->tx.req;
}
- /* rearm timer */
- mod_timer(&mgp->watchdog_timer,
- jiffies + myri10ge_watchdog_timeout * HZ);
- ss->watchdog_tx_done = ss->tx.done;
- ss->watchdog_tx_req = ss->tx.req;
mgp->watchdog_pause = rx_pause_cnt;
+
+ if (reset_needed) {
+ schedule_work(&mgp->watchdog_work);
+ } else {
+ /* rearm timer */
+ mod_timer(&mgp->watchdog_timer,
+ jiffies + myri10ge_watchdog_timeout * HZ);
+ }
+}
+
+static void myri10ge_free_slices(struct myri10ge_priv *mgp)
+{
+ struct myri10ge_slice_state *ss;
+ struct pci_dev *pdev = mgp->pdev;
+ size_t bytes;
+ int i;
+
+ if (mgp->ss == NULL)
+ return;
+
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = &mgp->ss[i];
+ if (ss->rx_done.entry != NULL) {
+ bytes = mgp->max_intr_slots *
+ sizeof(*ss->rx_done.entry);
+ dma_free_coherent(&pdev->dev, bytes,
+ ss->rx_done.entry, ss->rx_done.bus);
+ ss->rx_done.entry = NULL;
+ }
+ if (ss->fw_stats != NULL) {
+ bytes = sizeof(*ss->fw_stats);
+ dma_free_coherent(&pdev->dev, bytes,
+ ss->fw_stats, ss->fw_stats_bus);
+ ss->fw_stats = NULL;
+ }
+ }
+ kfree(mgp->ss);
+ mgp->ss = NULL;
+}
+
+static int myri10ge_alloc_slices(struct myri10ge_priv *mgp)
+{
+ struct myri10ge_slice_state *ss;
+ struct pci_dev *pdev = mgp->pdev;
+ size_t bytes;
+ int i;
+
+ bytes = sizeof(*mgp->ss) * mgp->num_slices;
+ mgp->ss = kzalloc(bytes, GFP_KERNEL);
+ if (mgp->ss == NULL) {
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = &mgp->ss[i];
+ bytes = mgp->max_intr_slots * sizeof(*ss->rx_done.entry);
+ ss->rx_done.entry = dma_alloc_coherent(&pdev->dev, bytes,
+ &ss->rx_done.bus,
+ GFP_KERNEL);
+ if (ss->rx_done.entry == NULL)
+ goto abort;
+ memset(ss->rx_done.entry, 0, bytes);
+ bytes = sizeof(*ss->fw_stats);
+ ss->fw_stats = dma_alloc_coherent(&pdev->dev, bytes,
+ &ss->fw_stats_bus,
+ GFP_KERNEL);
+ if (ss->fw_stats == NULL)
+ goto abort;
+ ss->mgp = mgp;
+ ss->dev = mgp->dev;
+ netif_napi_add(ss->dev, &ss->napi, myri10ge_poll,
+ myri10ge_napi_weight);
+ }
+ return 0;
+abort:
+ myri10ge_free_slices(mgp);
+ return -ENOMEM;
+}
+
+/*
+ * This function determines the number of slices supported.
+ * The number slices is the minumum of the number of CPUS,
+ * the number of MSI-X irqs supported, the number of slices
+ * supported by the firmware
+ */
+static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
+{
+ struct myri10ge_cmd cmd;
+ struct pci_dev *pdev = mgp->pdev;
+ char *old_fw;
+ int i, status, ncpus, msix_cap;
+
+ mgp->num_slices = 1;
+ msix_cap = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
+ ncpus = num_online_cpus();
+
+ if (myri10ge_max_slices == 1 || msix_cap == 0 ||
+ (myri10ge_max_slices == -1 && ncpus < 2))
+ return;
+
+ /* try to load the slice aware rss firmware */
+ old_fw = mgp->fw_name;
+ if (old_fw == myri10ge_fw_aligned)
+ mgp->fw_name = myri10ge_fw_rss_aligned;
+ else
+ mgp->fw_name = myri10ge_fw_rss_unaligned;
+ status = myri10ge_load_firmware(mgp, 0);
+ if (status != 0) {
+ dev_info(&pdev->dev, "Rss firmware not found\n");
+ return;
+ }
+
+ /* hit the board with a reset to ensure it is alive */
+ memset(&cmd, 0, sizeof(cmd));
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
+ if (status != 0) {
+ dev_err(&mgp->pdev->dev, "failed reset\n");
+ goto abort_with_fw;
+ return;
+ }
+
+ mgp->max_intr_slots = cmd.data0 / sizeof(struct mcp_slot);
+
+ /* tell it the size of the interrupt queues */
+ cmd.data0 = mgp->max_intr_slots * sizeof(struct mcp_slot);
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
+ if (status != 0) {
+ dev_err(&mgp->pdev->dev, "failed MXGEFW_CMD_SET_INTRQ_SIZE\n");
+ goto abort_with_fw;
+ }
+
+ /* ask the maximum number of slices it supports */
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES, &cmd, 0);
+ if (status != 0)
+ goto abort_with_fw;
+ else
+ mgp->num_slices = cmd.data0;
+
+ /* Only allow multiple slices if MSI-X is usable */
+ if (!myri10ge_msi) {
+ goto abort_with_fw;
+ }
+
+ /* if the admin did not specify a limit to how many
+ * slices we should use, cap it automatically to the
+ * number of CPUs currently online */
+ if (myri10ge_max_slices == -1)
+ myri10ge_max_slices = ncpus;
+
+ if (mgp->num_slices > myri10ge_max_slices)
+ mgp->num_slices = myri10ge_max_slices;
+
+ /* Now try to allocate as many MSI-X vectors as we have
+ * slices. We give up on MSI-X if we can only get a single
+ * vector. */
+
+ mgp->msix_vectors = kzalloc(mgp->num_slices *
+ sizeof(*mgp->msix_vectors), GFP_KERNEL);
+ if (mgp->msix_vectors == NULL)
+ goto disable_msix;
+ for (i = 0; i < mgp->num_slices; i++) {
+ mgp->msix_vectors[i].entry = i;
+ }
+
+ while (mgp->num_slices > 1) {
+ /* make sure it is a power of two */
+ while (!is_power_of_2(mgp->num_slices))
+ mgp->num_slices--;
+ if (mgp->num_slices == 1)
+ goto disable_msix;
+ status = pci_enable_msix(pdev, mgp->msix_vectors,
+ mgp->num_slices);
+ if (status == 0) {
+ pci_disable_msix(pdev);
+ return;
+ }
+ if (status > 0)
+ mgp->num_slices = status;
+ else
+ goto disable_msix;
+ }
+
+disable_msix:
+ if (mgp->msix_vectors != NULL) {
+ kfree(mgp->msix_vectors);
+ mgp->msix_vectors = NULL;
+ }
+
+abort_with_fw:
+ mgp->num_slices = 1;
+ mgp->fw_name = old_fw;
+ myri10ge_load_firmware(mgp, 0);
}
static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
@@ -3111,7 +3686,6 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
struct net_device *netdev;
struct myri10ge_priv *mgp;
struct device *dev = &pdev->dev;
- size_t bytes;
int i;
int status = -ENXIO;
int dac_enabled;
@@ -3126,7 +3700,6 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
mgp = netdev_priv(netdev);
mgp->dev = netdev;
- netif_napi_add(netdev, &mgp->ss.napi, myri10ge_poll, myri10ge_napi_weight);
mgp->pdev = pdev;
mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
mgp->pause = myri10ge_flow_control;
@@ -3172,11 +3745,6 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (mgp->cmd == NULL)
goto abort_with_netdev;
- mgp->ss.fw_stats = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->ss.fw_stats),
- &mgp->ss.fw_stats_bus, GFP_KERNEL);
- if (mgp->ss.fw_stats == NULL)
- goto abort_with_cmd;
-
mgp->board_span = pci_resource_len(pdev, 0);
mgp->iomem_base = pci_resource_start(pdev, 0);
mgp->mtrr = -1;
@@ -3213,28 +3781,28 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
for (i = 0; i < ETH_ALEN; i++)
netdev->dev_addr[i] = mgp->mac_addr[i];
- /* allocate rx done ring */
- bytes = mgp->max_intr_slots * sizeof(*mgp->ss.rx_done.entry);
- mgp->ss.rx_done.entry = dma_alloc_coherent(&pdev->dev, bytes,
- &mgp->ss.rx_done.bus, GFP_KERNEL);
- if (mgp->ss.rx_done.entry == NULL)
- goto abort_with_ioremap;
- memset(mgp->ss.rx_done.entry, 0, bytes);
-
myri10ge_select_firmware(mgp);
- status = myri10ge_load_firmware(mgp);
+ status = myri10ge_load_firmware(mgp, 1);
if (status != 0) {
dev_err(&pdev->dev, "failed to load firmware\n");
- goto abort_with_rx_done;
+ goto abort_with_ioremap;
+ }
+ myri10ge_probe_slices(mgp);
+ status = myri10ge_alloc_slices(mgp);
+ if (status != 0) {
+ dev_err(&pdev->dev, "failed to alloc slice state\n");
+ goto abort_with_firmware;
}
status = myri10ge_reset(mgp);
if (status != 0) {
dev_err(&pdev->dev, "failed reset\n");
- goto abort_with_firmware;
+ goto abort_with_slices;
}
-
+#ifdef CONFIG_DCA
+ myri10ge_setup_dca(mgp);
+#endif
pci_set_drvdata(pdev, mgp);
if ((myri10ge_initial_mtu + ETH_HLEN) > MYRI10GE_MAX_ETHER_MTU)
myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
@@ -3277,24 +3845,27 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
dev_err(&pdev->dev, "register_netdev failed: %d\n", status);
goto abort_with_state;
}
- dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
- (mgp->msi_enabled ? "MSI" : "xPIC"),
- netdev->irq, mgp->tx_boundary, mgp->fw_name,
- (mgp->wc_enabled ? "Enabled" : "Disabled"));
+ if (mgp->msix_enabled)
+ dev_info(dev, "%d MSI-X IRQs, tx bndry %d, fw %s, WC %s\n",
+ mgp->num_slices, mgp->tx_boundary, mgp->fw_name,
+ (mgp->wc_enabled ? "Enabled" : "Disabled"));
+ else
+ dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
+ mgp->msi_enabled ? "MSI" : "xPIC",
+ netdev->irq, mgp->tx_boundary, mgp->fw_name,
+ (mgp->wc_enabled ? "Enabled" : "Disabled"));
return 0;
abort_with_state:
pci_restore_state(pdev);
+abort_with_slices:
+ myri10ge_free_slices(mgp);
+
abort_with_firmware:
myri10ge_dummy_rdma(mgp, 0);
-abort_with_rx_done:
- bytes = mgp->max_intr_slots * sizeof(*mgp->ss.rx_done.entry);
- dma_free_coherent(&pdev->dev, bytes,
- mgp->ss.rx_done.entry, mgp->ss.rx_done.bus);
-
abort_with_ioremap:
iounmap(mgp->sram);
@@ -3303,10 +3874,6 @@ abort_with_wc:
if (mgp->mtrr >= 0)
mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
#endif
- dma_free_coherent(&pdev->dev, sizeof(*mgp->ss.fw_stats),
- mgp->ss.fw_stats, mgp->ss.fw_stats_bus);
-
-abort_with_cmd:
dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
mgp->cmd, mgp->cmd_bus);
@@ -3327,7 +3894,6 @@ static void myri10ge_remove(struct pci_dev *pdev)
{
struct myri10ge_priv *mgp;
struct net_device *netdev;
- size_t bytes;
mgp = pci_get_drvdata(pdev);
if (mgp == NULL)
@@ -3337,24 +3903,23 @@ static void myri10ge_remove(struct pci_dev *pdev)
netdev = mgp->dev;
unregister_netdev(netdev);
+#ifdef CONFIG_DCA
+ myri10ge_teardown_dca(mgp);
+#endif
myri10ge_dummy_rdma(mgp, 0);
/* avoid a memory leak */
pci_restore_state(pdev);
- bytes = mgp->max_intr_slots * sizeof(*mgp->ss.rx_done.entry);
- dma_free_coherent(&pdev->dev, bytes,
- mgp->ss.rx_done.entry, mgp->ss.rx_done.bus);
-
iounmap(mgp->sram);
#ifdef CONFIG_MTRR
if (mgp->mtrr >= 0)
mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
#endif
- dma_free_coherent(&pdev->dev, sizeof(*mgp->ss.fw_stats),
- mgp->ss.fw_stats, mgp->ss.fw_stats_bus);
-
+ myri10ge_free_slices(mgp);
+ if (mgp->msix_vectors != NULL)
+ kfree(mgp->msix_vectors);
dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
mgp->cmd, mgp->cmd_bus);
@@ -3383,10 +3948,42 @@ static struct pci_driver myri10ge_driver = {
#endif
};
+#ifdef CONFIG_DCA
+static int
+myri10ge_notify_dca(struct notifier_block *nb, unsigned long event, void *p)
+{
+ int err = driver_for_each_device(&myri10ge_driver.driver,
+ NULL, &event,
+ myri10ge_notify_dca_device);
+
+ if (err)
+ return NOTIFY_BAD;
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block myri10ge_dca_notifier = {
+ .notifier_call = myri10ge_notify_dca,
+ .next = NULL,
+ .priority = 0,
+};
+#endif /* CONFIG_DCA */
+
static __init int myri10ge_init_module(void)
{
printk(KERN_INFO "%s: Version %s\n", myri10ge_driver.name,
MYRI10GE_VERSION_STR);
+
+ if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_SRC_PORT ||
+ myri10ge_rss_hash < MXGEFW_RSS_HASH_TYPE_IPV4) {
+ printk(KERN_ERR
+ "%s: Illegal rssh hash type %d, defaulting to source port\n",
+ myri10ge_driver.name, myri10ge_rss_hash);
+ myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
+ }
+#ifdef CONFIG_DCA
+ dca_register_notify(&myri10ge_dca_notifier);
+#endif
+
return pci_register_driver(&myri10ge_driver);
}
@@ -3394,6 +3991,9 @@ module_init(myri10ge_init_module);
static __exit void myri10ge_cleanup_module(void)
{
+#ifdef CONFIG_DCA
+ dca_unregister_notify(&myri10ge_dca_notifier);
+#endif
pci_unregister_driver(&myri10ge_driver);
}
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index b42c05f..ff44961 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -585,16 +585,13 @@ static inline int rx_refill(struct net_device *ndev, gfp_t gfp)
for (i=0; i<NR_RX_DESC; i++) {
struct sk_buff *skb;
long res;
+
/* extra 16 bytes for alignment */
- skb = __dev_alloc_skb(REAL_RX_BUF_SIZE+16, gfp);
+ skb = __netdev_alloc_skb(ndev, REAL_RX_BUF_SIZE+16, gfp);
if (unlikely(!skb))
break;
- res = (long)skb->data & 0xf;
- res = 0x10 - res;
- res &= 0xf;
- skb_reserve(skb, res);
-
+ skb_reserve(skb, skb->data - PTR_ALIGN(skb->data, 16));
if (gfp != GFP_ATOMIC)
spin_lock_irqsave(&dev->rx_info.lock, flags);
res = ns83820_add_rx_skb(dev, skb);
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 284217c..d55932a 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -84,4 +84,10 @@ config MDIO_BITBANG
If in doubt, say N.
+config MDIO_OF_GPIO
+ tristate "Support for GPIO lib-based bitbanged MDIO buses"
+ depends on MDIO_BITBANG && OF_GPIO
+ ---help---
+ Supports GPIO lib-based MDIO busses.
+
endif # PHYLIB
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 5997d6e..eee329f 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+obj-$(CONFIG_MDIO_OF_GPIO) += mdio-ofgpio.o
diff --git a/drivers/net/phy/mdio-ofgpio.c b/drivers/net/phy/mdio-ofgpio.c
new file mode 100644
index 0000000..7edfc0c
--- /dev/null
+++ b/drivers/net/phy/mdio-ofgpio.c
@@ -0,0 +1,205 @@
+/*
+ * OpenFirmware GPIO based MDIO bitbang driver.
+ *
+ * Copyright (c) 2008 CSE Semaphore Belgium.
+ * by Laurent Pinchart <laurentp@xxxxxxxxxxxxxxxxx>
+ *
+ * Based on earlier work by
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@xxxxxxxxxxx>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@xxxxxxxxxxxxx>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/mdio-bitbang.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+
+struct mdio_gpio_info {
+ struct mdiobb_ctrl ctrl;
+ int mdc, mdio;
+};
+
+static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir)
+{
+ struct mdio_gpio_info *bitbang =
+ container_of(ctrl, struct mdio_gpio_info, ctrl);
+
+ if (dir)
+ gpio_direction_output(bitbang->mdio, 1);
+ else
+ gpio_direction_input(bitbang->mdio);
+}
+
+static int mdio_read(struct mdiobb_ctrl *ctrl)
+{
+ struct mdio_gpio_info *bitbang =
+ container_of(ctrl, struct mdio_gpio_info, ctrl);
+
+ return gpio_get_value(bitbang->mdio);
+}
+
+static void mdio(struct mdiobb_ctrl *ctrl, int what)
+{
+ struct mdio_gpio_info *bitbang =
+ container_of(ctrl, struct mdio_gpio_info, ctrl);
+
+ gpio_set_value(bitbang->mdio, what);
+}
+
+static void mdc(struct mdiobb_ctrl *ctrl, int what)
+{
+ struct mdio_gpio_info *bitbang =
+ container_of(ctrl, struct mdio_gpio_info, ctrl);
+
+ gpio_set_value(bitbang->mdc, what);
+}
+
+static struct mdiobb_ops mdio_gpio_ops = {
+ .owner = THIS_MODULE,
+ .set_mdc = mdc,
+ .set_mdio_dir = mdio_dir,
+ .set_mdio_data = mdio,
+ .get_mdio_data = mdio_read,
+};
+
+static int __devinit mdio_ofgpio_bitbang_init(struct mii_bus *bus,
+ struct device_node *np)
+{
+ struct mdio_gpio_info *bitbang = bus->priv;
+
+ bitbang->mdc = of_get_gpio(np, 0);
+ bitbang->mdio = of_get_gpio(np, 1);
+
+ if (bitbang->mdc < 0 || bitbang->mdio < 0)
+ return -ENODEV;
+
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%x", bitbang->mdc);
+ return 0;
+}
+
+static void __devinit add_phy(struct mii_bus *bus, struct device_node *np)
+{
+ const u32 *data;
+ int len, id, irq;
+
+ data = of_get_property(np, "reg", &len);
+ if (!data || len != 4)
+ return;
+
+ id = *data;
+ bus->phy_mask &= ~(1 << id);
+
+ irq = of_irq_to_resource(np, 0, NULL);
+ if (irq != NO_IRQ)
+ bus->irq[id] = irq;
+}
+
+static int __devinit mdio_ofgpio_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct device_node *np = NULL;
+ struct mii_bus *new_bus;
+ struct mdio_gpio_info *bitbang;
+ int ret = -ENOMEM;
+ int i;
+
+ bitbang = kzalloc(sizeof(struct mdio_gpio_info), GFP_KERNEL);
+ if (!bitbang)
+ goto out;
+
+ bitbang->ctrl.ops = &mdio_gpio_ops;
+
+ new_bus = alloc_mdio_bitbang(&bitbang->ctrl);
+ if (!new_bus)
+ goto out_free_priv;
+
+ new_bus->name = "GPIO Bitbanged MII",
+
+ ret = mdio_ofgpio_bitbang_init(new_bus, ofdev->node);
+ if (ret)
+ goto out_free_bus;
+
+ new_bus->phy_mask = ~0;
+ new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+ if (!new_bus->irq)
+ goto out_free_bus;
+
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ new_bus->irq[i] = -1;
+
+ while ((np = of_get_next_child(ofdev->node, np)))
+ if (!strcmp(np->type, "ethernet-phy"))
+ add_phy(new_bus, np);
+
+ new_bus->dev = &ofdev->dev;
+ dev_set_drvdata(&ofdev->dev, new_bus);
+
+ ret = mdiobus_register(new_bus);
+ if (ret)
+ goto out_free_irqs;
+
+ return 0;
+
+out_free_irqs:
+ dev_set_drvdata(&ofdev->dev, NULL);
+ kfree(new_bus->irq);
+out_free_bus:
+ kfree(new_bus);
+out_free_priv:
+ free_mdio_bitbang(new_bus);
+out:
+ return ret;
+}
+
+static int mdio_ofgpio_remove(struct of_device *ofdev)
+{
+ struct mii_bus *bus = dev_get_drvdata(&ofdev->dev);
+ struct mdio_gpio_info *bitbang = bus->priv;
+
+ mdiobus_unregister(bus);
+ free_mdio_bitbang(bus);
+ dev_set_drvdata(&ofdev->dev, NULL);
+ kfree(bus->irq);
+ kfree(bitbang);
+ kfree(bus);
+
+ return 0;
+}
+
+static struct of_device_id mdio_ofgpio_match[] = {
+ {
+ .compatible = "virtual,mdio-gpio",
+ },
+ {},
+};
+
+static struct of_platform_driver mdio_ofgpio_driver = {
+ .name = "mdio-gpio",
+ .match_table = mdio_ofgpio_match,
+ .probe = mdio_ofgpio_probe,
+ .remove = mdio_ofgpio_remove,
+};
+
+static int mdio_ofgpio_init(void)
+{
+ return of_register_platform_driver(&mdio_ofgpio_driver);
+}
+
+static void mdio_ofgpio_exit(void)
+{
+ of_unregister_platform_driver(&mdio_ofgpio_driver);
+}
+
+module_init(mdio_ofgpio_init);
+module_exit(mdio_ofgpio_exit);
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index e365efb..2eb54fd 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -110,7 +110,7 @@ static void gelic_card_get_ether_port_status(struct gelic_card *card,
void gelic_card_up(struct gelic_card *card)
{
pr_debug("%s: called\n", __func__);
- down(&card->updown_lock);
+ mutex_lock(&card->updown_lock);
if (atomic_inc_return(&card->users) == 1) {
pr_debug("%s: real do\n", __func__);
/* enable irq */
@@ -120,7 +120,7 @@ void gelic_card_up(struct gelic_card *card)
napi_enable(&card->napi);
}
- up(&card->updown_lock);
+ mutex_unlock(&card->updown_lock);
pr_debug("%s: done\n", __func__);
}
@@ -128,7 +128,7 @@ void gelic_card_down(struct gelic_card *card)
{
u64 mask;
pr_debug("%s: called\n", __func__);
- down(&card->updown_lock);
+ mutex_lock(&card->updown_lock);
if (atomic_dec_if_positive(&card->users) == 0) {
pr_debug("%s: real do\n", __func__);
napi_disable(&card->napi);
@@ -146,7 +146,7 @@ void gelic_card_down(struct gelic_card *card)
/* stop tx */
gelic_card_disable_txdmac(card);
}
- up(&card->updown_lock);
+ mutex_unlock(&card->updown_lock);
pr_debug("%s: done\n", __func__);
}
@@ -1534,7 +1534,7 @@ static struct gelic_card *gelic_alloc_card_net(struct net_device **netdev)
INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task);
init_waitqueue_head(&card->waitq);
atomic_set(&card->tx_timeout_task_counter, 0);
- init_MUTEX(&card->updown_lock);
+ mutex_init(&card->updown_lock);
atomic_set(&card->users, 0);
return card;
diff --git a/drivers/net/ps3_gelic_net.h b/drivers/net/ps3_gelic_net.h
index 520f143..8b41386 100644
--- a/drivers/net/ps3_gelic_net.h
+++ b/drivers/net/ps3_gelic_net.h
@@ -298,7 +298,7 @@ struct gelic_card {
wait_queue_head_t waitq;
/* only first user should up the card */
- struct semaphore updown_lock;
+ struct mutex updown_lock;
atomic_t users;
u64 ether_port_status;
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 1dae1f2..e5e0233 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -240,12 +240,12 @@ static u32 gelic_wl_get_link(struct net_device *netdev)
u32 ret;
pr_debug("%s: <-\n", __func__);
- down(&wl->assoc_stat_lock);
+ mutex_lock(&wl->assoc_stat_lock);
if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED)
ret = 1;
else
ret = 0;
- up(&wl->assoc_stat_lock);
+ mutex_unlock(&wl->assoc_stat_lock);
pr_debug("%s: ->\n", __func__);
return ret;
}
@@ -695,7 +695,7 @@ static int gelic_wl_get_scan(struct net_device *netdev,
unsigned long this_time = jiffies;
pr_debug("%s: <-\n", __func__);
- if (down_interruptible(&wl->scan_lock))
+ if (mutex_lock_interruptible(&wl->scan_lock))
return -EAGAIN;
switch (wl->scan_stat) {
@@ -733,7 +733,7 @@ static int gelic_wl_get_scan(struct net_device *netdev,
wrqu->data.length = ev - extra;
wrqu->data.flags = 0;
out:
- up(&wl->scan_lock);
+ mutex_unlock(&wl->scan_lock);
pr_debug("%s: -> %d %d\n", __func__, ret, wrqu->data.length);
return ret;
}
@@ -979,7 +979,7 @@ static int gelic_wl_get_essid(struct net_device *netdev,
unsigned long irqflag;
pr_debug("%s: <- \n", __func__);
- down(&wl->assoc_stat_lock);
+ mutex_lock(&wl->assoc_stat_lock);
spin_lock_irqsave(&wl->lock, irqflag);
if (test_bit(GELIC_WL_STAT_ESSID_SET, &wl->stat) ||
wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED) {
@@ -989,7 +989,7 @@ static int gelic_wl_get_essid(struct net_device *netdev,
} else
data->essid.flags = 0;
- up(&wl->assoc_stat_lock);
+ mutex_unlock(&wl->assoc_stat_lock);
spin_unlock_irqrestore(&wl->lock, irqflag);
pr_debug("%s: -> len=%d \n", __func__, data->essid.length);
@@ -1170,7 +1170,7 @@ static int gelic_wl_get_ap(struct net_device *netdev,
unsigned long irqflag;
pr_debug("%s: <-\n", __func__);
- down(&wl->assoc_stat_lock);
+ mutex_lock(&wl->assoc_stat_lock);
spin_lock_irqsave(&wl->lock, irqflag);
if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED) {
data->ap_addr.sa_family = ARPHRD_ETHER;
@@ -1180,7 +1180,7 @@ static int gelic_wl_get_ap(struct net_device *netdev,
memset(data->ap_addr.sa_data, 0, ETH_ALEN);
spin_unlock_irqrestore(&wl->lock, irqflag);
- up(&wl->assoc_stat_lock);
+ mutex_unlock(&wl->assoc_stat_lock);
pr_debug("%s: ->\n", __func__);
return 0;
}
@@ -1554,7 +1554,7 @@ static int gelic_wl_start_scan(struct gelic_wl_info *wl, int always_scan)
int ret = 0;
pr_debug("%s: <- always=%d\n", __func__, always_scan);
- if (down_interruptible(&wl->scan_lock))
+ if (mutex_lock_interruptible(&wl->scan_lock))
return -ERESTARTSYS;
/*
@@ -1588,7 +1588,7 @@ static int gelic_wl_start_scan(struct gelic_wl_info *wl, int always_scan)
}
kfree(cmd);
out:
- up(&wl->scan_lock);
+ mutex_unlock(&wl->scan_lock);
pr_debug("%s: ->\n", __func__);
return ret;
}
@@ -1610,7 +1610,7 @@ static void gelic_wl_scan_complete_event(struct gelic_wl_info *wl)
DECLARE_MAC_BUF(mac);
pr_debug("%s:start\n", __func__);
- down(&wl->scan_lock);
+ mutex_lock(&wl->scan_lock);
if (wl->scan_stat != GELIC_WL_SCAN_STAT_SCANNING) {
/*
@@ -1727,7 +1727,7 @@ static void gelic_wl_scan_complete_event(struct gelic_wl_info *wl)
NULL);
out:
complete(&wl->scan_done);
- up(&wl->scan_lock);
+ mutex_unlock(&wl->scan_lock);
pr_debug("%s:end\n", __func__);
}
@@ -2151,7 +2151,7 @@ static void gelic_wl_disconnect_event(struct gelic_wl_info *wl,
* As it waits with timeout, just leave assoc_done
* uncompleted, then it terminates with timeout
*/
- if (down_trylock(&wl->assoc_stat_lock)) {
+ if (!mutex_trylock(&wl->assoc_stat_lock)) {
pr_debug("%s: already locked\n", __func__);
lock = 0;
} else {
@@ -2170,7 +2170,7 @@ static void gelic_wl_disconnect_event(struct gelic_wl_info *wl,
netif_carrier_off(port_to_netdev(wl_port(wl)));
if (lock)
- up(&wl->assoc_stat_lock);
+ mutex_unlock(&wl->assoc_stat_lock);
}
/*
* event worker
@@ -2258,7 +2258,7 @@ static void gelic_wl_assoc_worker(struct work_struct *work)
wl = container_of(work, struct gelic_wl_info, assoc_work.work);
- down(&wl->assoc_stat_lock);
+ mutex_lock(&wl->assoc_stat_lock);
if (wl->assoc_stat != GELIC_WL_ASSOC_STAT_DISCONN)
goto out;
@@ -2282,7 +2282,7 @@ static void gelic_wl_assoc_worker(struct work_struct *work)
wait_for_completion(&wl->scan_done);
pr_debug("%s: scan done\n", __func__);
- down(&wl->scan_lock);
+ mutex_lock(&wl->scan_lock);
if (wl->scan_stat != GELIC_WL_SCAN_STAT_GOT_LIST) {
gelic_wl_send_iwap_event(wl, NULL);
pr_info("%s: no scan list. association failed\n", __func__);
@@ -2302,9 +2302,9 @@ static void gelic_wl_assoc_worker(struct work_struct *work)
if (ret)
pr_info("%s: association failed %d\n", __func__, ret);
scan_lock_out:
- up(&wl->scan_lock);
+ mutex_unlock(&wl->scan_lock);
out:
- up(&wl->assoc_stat_lock);
+ mutex_unlock(&wl->assoc_stat_lock);
}
/*
* Interrupt handler
@@ -2431,8 +2431,8 @@ static struct net_device *gelic_wl_alloc(struct gelic_card *card)
INIT_DELAYED_WORK(&wl->event_work, gelic_wl_event_worker);
INIT_DELAYED_WORK(&wl->assoc_work, gelic_wl_assoc_worker);
- init_MUTEX(&wl->scan_lock);
- init_MUTEX(&wl->assoc_stat_lock);
+ mutex_init(&wl->scan_lock);
+ mutex_init(&wl->assoc_stat_lock);
init_completion(&wl->scan_done);
/* for the case that no scan request is issued and stop() is called */
diff --git a/drivers/net/ps3_gelic_wireless.h b/drivers/net/ps3_gelic_wireless.h
index 1036971..bc73063 100644
--- a/drivers/net/ps3_gelic_wireless.h
+++ b/drivers/net/ps3_gelic_wireless.h
@@ -241,7 +241,7 @@ enum gelic_wl_assoc_state {
#define GELIC_WEP_KEYS 4
struct gelic_wl_info {
/* bss list */
- struct semaphore scan_lock;
+ struct mutex scan_lock;
struct list_head network_list;
struct list_head network_free_list;
struct gelic_wl_scan_info *networks;
@@ -266,7 +266,7 @@ struct gelic_wl_info {
enum gelic_wl_wpa_level wpa_level; /* wpa/wpa2 */
/* association handling */
- struct semaphore assoc_stat_lock;
+ struct mutex assoc_stat_lock;
struct delayed_work assoc_work;
enum gelic_wl_assoc_state assoc_stat;
struct completion assoc_done;
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 326c941..dcc953e 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -6997,7 +6997,7 @@ static int rxd_owner_bit_reset(struct s2io_nic *sp)
&skb,(u64 *)&temp0_64,
(u64 *)&temp1_64,
(u64 *)&temp2_64,
- size) == ENOMEM) {
+ size) == -ENOMEM) {
return 0;
}
diff --git a/drivers/net/sfc/Kconfig b/drivers/net/sfc/Kconfig
index dbad95c..3be13b5 100644
--- a/drivers/net/sfc/Kconfig
+++ b/drivers/net/sfc/Kconfig
@@ -4,6 +4,8 @@ config SFC
select MII
select INET_LRO
select CRC32
+ select I2C
+ select I2C_ALGOBIT
help
This driver supports 10-gigabit Ethernet cards based on
the Solarflare Communications Solarstorm SFC4000 controller.
diff --git a/drivers/net/sfc/Makefile b/drivers/net/sfc/Makefile
index 1d2daee..c8f5704 100644
--- a/drivers/net/sfc/Makefile
+++ b/drivers/net/sfc/Makefile
@@ -1,5 +1,5 @@
sfc-y += efx.o falcon.o tx.o rx.o falcon_xmac.o \
- i2c-direct.o selftest.o ethtool.o xfp_phy.o \
+ selftest.o ethtool.o xfp_phy.o \
mdio_10g.o tenxpress.o boards.o sfe4001.o
obj-$(CONFIG_SFC) += sfc.o
diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c
index 7fc0328..d3d3dd0 100644
--- a/drivers/net/sfc/boards.c
+++ b/drivers/net/sfc/boards.c
@@ -109,7 +109,7 @@ static struct efx_board_data board_data[] = {
[EFX_BOARD_INVALID] =
{NULL, NULL, dummy_init},
[EFX_BOARD_SFE4001] =
- {"SFE4001", "10GBASE-T adapter", sfe4001_poweron},
+ {"SFE4001", "10GBASE-T adapter", sfe4001_init},
[EFX_BOARD_SFE4002] =
{"SFE4002", "XFP adapter", sfe4002_init},
};
diff --git a/drivers/net/sfc/boards.h b/drivers/net/sfc/boards.h
index 695764d..e5e8443 100644
--- a/drivers/net/sfc/boards.h
+++ b/drivers/net/sfc/boards.h
@@ -20,8 +20,7 @@ enum efx_board_type {
};
extern int efx_set_board_info(struct efx_nic *efx, u16 revision_info);
-extern int sfe4001_poweron(struct efx_nic *efx);
-extern void sfe4001_poweroff(struct efx_nic *efx);
+extern int sfe4001_init(struct efx_nic *efx);
/* Are we putting the PHY into flash config mode */
extern unsigned int sfe4001_phy_flash_cfg;
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 4497606..74265d8 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -1815,6 +1815,7 @@ static struct efx_board efx_dummy_board_info = {
.init = efx_nic_dummy_op_int,
.init_leds = efx_port_dummy_op_int,
.set_fault_led = efx_port_dummy_op_blink,
+ .fini = efx_port_dummy_op_void,
};
/**************************************************************************
@@ -1941,6 +1942,7 @@ static void efx_pci_remove_main(struct efx_nic *efx)
efx_fini_port(efx);
/* Shutdown the board, then the NIC and board state */
+ efx->board_info.fini(efx);
falcon_fini_interrupt(efx);
efx_fini_napi(efx);
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index d3f749c..8cb5798 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -13,6 +13,8 @@
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/seq_file.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
#include "net_driver.h"
#include "bitfield.h"
#include "efx.h"
@@ -36,10 +38,12 @@
* struct falcon_nic_data - Falcon NIC state
* @next_buffer_table: First available buffer table id
* @pci_dev2: The secondary PCI device if present
+ * @i2c_data: Operations and state for I2C bit-bashing algorithm
*/
struct falcon_nic_data {
unsigned next_buffer_table;
struct pci_dev *pci_dev2;
+ struct i2c_algo_bit_data i2c_data;
};
/**************************************************************************
@@ -175,39 +179,57 @@ static inline int falcon_event_present(efx_qword_t *event)
*
**************************************************************************
*/
-static void falcon_setsdascl(struct efx_i2c_interface *i2c)
+static void falcon_setsda(void *data, int state)
{
+ struct efx_nic *efx = (struct efx_nic *)data;
efx_oword_t reg;
- falcon_read(i2c->efx, ®, GPIO_CTL_REG_KER);
- EFX_SET_OWORD_FIELD(reg, GPIO0_OEN, (i2c->scl ? 0 : 1));
- EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, (i2c->sda ? 0 : 1));
- falcon_write(i2c->efx, ®, GPIO_CTL_REG_KER);
+ falcon_read(efx, ®, GPIO_CTL_REG_KER);
+ EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, !state);
+ falcon_write(efx, ®, GPIO_CTL_REG_KER);
}
-static int falcon_getsda(struct efx_i2c_interface *i2c)
+static void falcon_setscl(void *data, int state)
{
+ struct efx_nic *efx = (struct efx_nic *)data;
efx_oword_t reg;
- falcon_read(i2c->efx, ®, GPIO_CTL_REG_KER);
+ falcon_read(efx, ®, GPIO_CTL_REG_KER);
+ EFX_SET_OWORD_FIELD(reg, GPIO0_OEN, !state);
+ falcon_write(efx, ®, GPIO_CTL_REG_KER);
+}
+
+static int falcon_getsda(void *data)
+{
+ struct efx_nic *efx = (struct efx_nic *)data;
+ efx_oword_t reg;
+
+ falcon_read(efx, ®, GPIO_CTL_REG_KER);
return EFX_OWORD_FIELD(reg, GPIO3_IN);
}
-static int falcon_getscl(struct efx_i2c_interface *i2c)
+static int falcon_getscl(void *data)
{
+ struct efx_nic *efx = (struct efx_nic *)data;
efx_oword_t reg;
- falcon_read(i2c->efx, ®, GPIO_CTL_REG_KER);
- return EFX_DWORD_FIELD(reg, GPIO0_IN);
+ falcon_read(efx, ®, GPIO_CTL_REG_KER);
+ return EFX_OWORD_FIELD(reg, GPIO0_IN);
}
-static struct efx_i2c_bit_operations falcon_i2c_bit_operations = {
- .setsda = falcon_setsdascl,
- .setscl = falcon_setsdascl,
+static struct i2c_algo_bit_data falcon_i2c_bit_operations = {
+ .setsda = falcon_setsda,
+ .setscl = falcon_setscl,
.getsda = falcon_getsda,
.getscl = falcon_getscl,
- .udelay = 100,
- .mdelay = 10,
+ .udelay = 5,
+ /*
+ * This is the number of system clock ticks after which
+ * i2c-algo-bit gives up waiting for SCL to become high.
+ * It must be at least 2 since the first tick can happen
+ * immediately after it starts waiting.
+ */
+ .timeout = 2,
};
/**************************************************************************
@@ -2403,12 +2425,6 @@ int falcon_probe_nic(struct efx_nic *efx)
struct falcon_nic_data *nic_data;
int rc;
- /* Initialise I2C interface state */
- efx->i2c.efx = efx;
- efx->i2c.op = &falcon_i2c_bit_operations;
- efx->i2c.sda = 1;
- efx->i2c.scl = 1;
-
/* Allocate storage for hardware specific data */
nic_data = kzalloc(sizeof(*nic_data), GFP_KERNEL);
efx->nic_data = nic_data;
@@ -2459,6 +2475,18 @@ int falcon_probe_nic(struct efx_nic *efx)
if (rc)
goto fail5;
+ /* Initialise I2C adapter */
+ efx->i2c_adap.owner = THIS_MODULE;
+ efx->i2c_adap.class = I2C_CLASS_HWMON;
+ nic_data->i2c_data = falcon_i2c_bit_operations;
+ nic_data->i2c_data.data = efx;
+ efx->i2c_adap.algo_data = &nic_data->i2c_data;
+ efx->i2c_adap.dev.parent = &efx->pci_dev->dev;
+ strcpy(efx->i2c_adap.name, "SFC4000 GPIO");
+ rc = i2c_bit_add_bus(&efx->i2c_adap);
+ if (rc)
+ goto fail5;
+
return 0;
fail5:
@@ -2633,6 +2661,10 @@ int falcon_init_nic(struct efx_nic *efx)
void falcon_remove_nic(struct efx_nic *efx)
{
struct falcon_nic_data *nic_data = efx->nic_data;
+ int rc;
+
+ rc = i2c_del_adapter(&efx->i2c_adap);
+ BUG_ON(rc);
falcon_free_buffer(efx, &efx->irq_status);
diff --git a/drivers/net/sfc/i2c-direct.c b/drivers/net/sfc/i2c-direct.c
deleted file mode 100644
index b6c62d0..0000000
--- a/drivers/net/sfc/i2c-direct.c
+++ /dev/null
@@ -1,381 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2005 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#include <linux/delay.h>
-#include "net_driver.h"
-#include "i2c-direct.h"
-
-/*
- * I2C data (SDA) and clock (SCL) line read/writes with appropriate
- * delays.
- */
-
-static inline void setsda(struct efx_i2c_interface *i2c, int state)
-{
- udelay(i2c->op->udelay);
- i2c->sda = state;
- i2c->op->setsda(i2c);
- udelay(i2c->op->udelay);
-}
-
-static inline void setscl(struct efx_i2c_interface *i2c, int state)
-{
- udelay(i2c->op->udelay);
- i2c->scl = state;
- i2c->op->setscl(i2c);
- udelay(i2c->op->udelay);
-}
-
-static inline int getsda(struct efx_i2c_interface *i2c)
-{
- int sda;
-
- udelay(i2c->op->udelay);
- sda = i2c->op->getsda(i2c);
- udelay(i2c->op->udelay);
- return sda;
-}
-
-static inline int getscl(struct efx_i2c_interface *i2c)
-{
- int scl;
-
- udelay(i2c->op->udelay);
- scl = i2c->op->getscl(i2c);
- udelay(i2c->op->udelay);
- return scl;
-}
-
-/*
- * I2C low-level protocol operations
- *
- */
-
-static inline void i2c_release(struct efx_i2c_interface *i2c)
-{
- EFX_WARN_ON_PARANOID(!i2c->scl);
- EFX_WARN_ON_PARANOID(!i2c->sda);
- /* Devices may time out if operations do not end */
- setscl(i2c, 1);
- setsda(i2c, 1);
- EFX_BUG_ON_PARANOID(getsda(i2c) != 1);
- EFX_BUG_ON_PARANOID(getscl(i2c) != 1);
-}
-
-static inline void i2c_start(struct efx_i2c_interface *i2c)
-{
- /* We may be restarting immediately after a {send,recv}_bit,
- * so SCL will not necessarily already be high.
- */
- EFX_WARN_ON_PARANOID(!i2c->sda);
- setscl(i2c, 1);
- setsda(i2c, 0);
- setscl(i2c, 0);
- setsda(i2c, 1);
-}
-
-static inline void i2c_send_bit(struct efx_i2c_interface *i2c, int bit)
-{
- EFX_WARN_ON_PARANOID(i2c->scl != 0);
- setsda(i2c, bit);
- setscl(i2c, 1);
- setscl(i2c, 0);
- setsda(i2c, 1);
-}
-
-static inline int i2c_recv_bit(struct efx_i2c_interface *i2c)
-{
- int bit;
-
- EFX_WARN_ON_PARANOID(i2c->scl != 0);
- EFX_WARN_ON_PARANOID(!i2c->sda);
- setscl(i2c, 1);
- bit = getsda(i2c);
- setscl(i2c, 0);
- return bit;
-}
-
-static inline void i2c_stop(struct efx_i2c_interface *i2c)
-{
- EFX_WARN_ON_PARANOID(i2c->scl != 0);
- setsda(i2c, 0);
- setscl(i2c, 1);
- setsda(i2c, 1);
-}
-
-/*
- * I2C mid-level protocol operations
- *
- */
-
-/* Sends a byte via the I2C bus and checks for an acknowledgement from
- * the slave device.
- */
-static int i2c_send_byte(struct efx_i2c_interface *i2c, u8 byte)
-{
- int i;
-
- /* Send byte */
- for (i = 0; i < 8; i++) {
- i2c_send_bit(i2c, !!(byte & 0x80));
- byte <<= 1;
- }
-
- /* Check for acknowledgement from slave */
- return (i2c_recv_bit(i2c) == 0 ? 0 : -EIO);
-}
-
-/* Receives a byte via the I2C bus and sends ACK/NACK to the slave device. */
-static u8 i2c_recv_byte(struct efx_i2c_interface *i2c, int ack)
-{
- u8 value = 0;
- int i;
-
- /* Receive byte */
- for (i = 0; i < 8; i++)
- value = (value << 1) | i2c_recv_bit(i2c);
-
- /* Send ACK/NACK */
- i2c_send_bit(i2c, (ack ? 0 : 1));
-
- return value;
-}
-
-/* Calculate command byte for a read operation */
-static inline u8 i2c_read_cmd(u8 device_id)
-{
- return ((device_id << 1) | 1);
-}
-
-/* Calculate command byte for a write operation */
-static inline u8 i2c_write_cmd(u8 device_id)
-{
- return ((device_id << 1) | 0);
-}
-
-int efx_i2c_check_presence(struct efx_i2c_interface *i2c, u8 device_id)
-{
- int rc;
-
- /* If someone is driving the bus low we just give up. */
- if (getsda(i2c) == 0 || getscl(i2c) == 0) {
- EFX_ERR(i2c->efx, "%s someone is holding the I2C bus low."
- " Giving up.\n", __func__);
- return -EFAULT;
- }
-
- /* Pretend to initiate a device write */
- i2c_start(i2c);
- rc = i2c_send_byte(i2c, i2c_write_cmd(device_id));
- if (rc)
- goto out;
-
- out:
- i2c_stop(i2c);
- i2c_release(i2c);
-
- return rc;
-}
-
-/* This performs a fast read of one or more consecutive bytes from an
- * I2C device. Not all devices support consecutive reads of more than
- * one byte; for these devices use efx_i2c_read() instead.
- */
-int efx_i2c_fast_read(struct efx_i2c_interface *i2c,
- u8 device_id, u8 offset, u8 *data, unsigned int len)
-{
- int i;
- int rc;
-
- EFX_WARN_ON_PARANOID(getsda(i2c) != 1);
- EFX_WARN_ON_PARANOID(getscl(i2c) != 1);
- EFX_WARN_ON_PARANOID(data == NULL);
- EFX_WARN_ON_PARANOID(len < 1);
-
- /* Select device and starting offset */
- i2c_start(i2c);
- rc = i2c_send_byte(i2c, i2c_write_cmd(device_id));
- if (rc)
- goto out;
- rc = i2c_send_byte(i2c, offset);
- if (rc)
- goto out;
-
- /* Read data from device */
- i2c_start(i2c);
- rc = i2c_send_byte(i2c, i2c_read_cmd(device_id));
- if (rc)
- goto out;
- for (i = 0; i < (len - 1); i++)
- /* Read and acknowledge all but the last byte */
- data[i] = i2c_recv_byte(i2c, 1);
- /* Read last byte with no acknowledgement */
- data[i] = i2c_recv_byte(i2c, 0);
-
- out:
- i2c_stop(i2c);
- i2c_release(i2c);
-
- return rc;
-}
-
-/* This performs a fast write of one or more consecutive bytes to an
- * I2C device. Not all devices support consecutive writes of more
- * than one byte; for these devices use efx_i2c_write() instead.
- */
-int efx_i2c_fast_write(struct efx_i2c_interface *i2c,
- u8 device_id, u8 offset,
- const u8 *data, unsigned int len)
-{
- int i;
- int rc;
-
- EFX_WARN_ON_PARANOID(getsda(i2c) != 1);
- EFX_WARN_ON_PARANOID(getscl(i2c) != 1);
- EFX_WARN_ON_PARANOID(len < 1);
-
- /* Select device and starting offset */
- i2c_start(i2c);
- rc = i2c_send_byte(i2c, i2c_write_cmd(device_id));
- if (rc)
- goto out;
- rc = i2c_send_byte(i2c, offset);
- if (rc)
- goto out;
-
- /* Write data to device */
- for (i = 0; i < len; i++) {
- rc = i2c_send_byte(i2c, data[i]);
- if (rc)
- goto out;
- }
-
- out:
- i2c_stop(i2c);
- i2c_release(i2c);
-
- return rc;
-}
-
-/* I2C byte-by-byte read */
-int efx_i2c_read(struct efx_i2c_interface *i2c,
- u8 device_id, u8 offset, u8 *data, unsigned int len)
-{
- int rc;
-
- /* i2c_fast_read with length 1 is a single byte read */
- for (; len > 0; offset++, data++, len--) {
- rc = efx_i2c_fast_read(i2c, device_id, offset, data, 1);
- if (rc)
- return rc;
- }
-
- return 0;
-}
-
-/* I2C byte-by-byte write */
-int efx_i2c_write(struct efx_i2c_interface *i2c,
- u8 device_id, u8 offset, const u8 *data, unsigned int len)
-{
- int rc;
-
- /* i2c_fast_write with length 1 is a single byte write */
- for (; len > 0; offset++, data++, len--) {
- rc = efx_i2c_fast_write(i2c, device_id, offset, data, 1);
- if (rc)
- return rc;
- mdelay(i2c->op->mdelay);
- }
-
- return 0;
-}
-
-
-/* This is just a slightly neater wrapper round efx_i2c_fast_write
- * in the case where the target doesn't take an offset
- */
-int efx_i2c_send_bytes(struct efx_i2c_interface *i2c,
- u8 device_id, const u8 *data, unsigned int len)
-{
- return efx_i2c_fast_write(i2c, device_id, data[0], data + 1, len - 1);
-}
-
-/* I2C receiving of bytes - does not send an offset byte */
-int efx_i2c_recv_bytes(struct efx_i2c_interface *i2c, u8 device_id,
- u8 *bytes, unsigned int len)
-{
- int i;
- int rc;
-
- EFX_WARN_ON_PARANOID(getsda(i2c) != 1);
- EFX_WARN_ON_PARANOID(getscl(i2c) != 1);
- EFX_WARN_ON_PARANOID(len < 1);
-
- /* Select device */
- i2c_start(i2c);
-
- /* Read data from device */
- rc = i2c_send_byte(i2c, i2c_read_cmd(device_id));
- if (rc)
- goto out;
-
- for (i = 0; i < (len - 1); i++)
- /* Read and acknowledge all but the last byte */
- bytes[i] = i2c_recv_byte(i2c, 1);
- /* Read last byte with no acknowledgement */
- bytes[i] = i2c_recv_byte(i2c, 0);
-
- out:
- i2c_stop(i2c);
- i2c_release(i2c);
-
- return rc;
-}
-
-/* SMBus and some I2C devices will time out if the I2C clock is
- * held low for too long. This is most likely to happen in virtualised
- * systems (when the entire domain is descheduled) but could in
- * principle happen due to preemption on any busy system (and given the
- * potential length of an I2C operation turning preemption off is not
- * a sensible option). The following functions deal with the failure by
- * retrying up to a fixed number of times.
- */
-
-#define I2C_MAX_RETRIES (10)
-
-/* The timeout problem will result in -EIO. If the wrapped function
- * returns any other error, pass this up and do not retry. */
-#define RETRY_WRAPPER(_f) \
- int retries = I2C_MAX_RETRIES; \
- int rc; \
- while (retries) { \
- rc = _f; \
- if (rc != -EIO) \
- return rc; \
- retries--; \
- } \
- return rc; \
-
-int efx_i2c_check_presence_retry(struct efx_i2c_interface *i2c, u8 device_id)
-{
- RETRY_WRAPPER(efx_i2c_check_presence(i2c, device_id))
-}
-
-int efx_i2c_read_retry(struct efx_i2c_interface *i2c,
- u8 device_id, u8 offset, u8 *data, unsigned int len)
-{
- RETRY_WRAPPER(efx_i2c_read(i2c, device_id, offset, data, len))
-}
-
-int efx_i2c_write_retry(struct efx_i2c_interface *i2c,
- u8 device_id, u8 offset, const u8 *data, unsigned int len)
-{
- RETRY_WRAPPER(efx_i2c_write(i2c, device_id, offset, data, len))
-}
diff --git a/drivers/net/sfc/i2c-direct.h b/drivers/net/sfc/i2c-direct.h
deleted file mode 100644
index 291e561..0000000
--- a/drivers/net/sfc/i2c-direct.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2005 Fen Systems Ltd.
- * Copyright 2006 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_I2C_DIRECT_H
-#define EFX_I2C_DIRECT_H
-
-#include "net_driver.h"
-
-/*
- * Direct control of an I2C bus
- */
-
-struct efx_i2c_interface;
-
-/**
- * struct efx_i2c_bit_operations - I2C bus direct control methods
- *
- * I2C bus direct control methods.
- *
- * @setsda: Set state of SDA line
- * @setscl: Set state of SCL line
- * @getsda: Get state of SDA line
- * @getscl: Get state of SCL line
- * @udelay: Delay between each bit operation
- * @mdelay: Delay between each byte write
- */
-struct efx_i2c_bit_operations {
- void (*setsda) (struct efx_i2c_interface *i2c);
- void (*setscl) (struct efx_i2c_interface *i2c);
- int (*getsda) (struct efx_i2c_interface *i2c);
- int (*getscl) (struct efx_i2c_interface *i2c);
- unsigned int udelay;
- unsigned int mdelay;
-};
-
-/**
- * struct efx_i2c_interface - an I2C interface
- *
- * An I2C interface.
- *
- * @efx: Attached Efx NIC
- * @op: I2C bus control methods
- * @sda: Current output state of SDA line
- * @scl: Current output state of SCL line
- */
-struct efx_i2c_interface {
- struct efx_nic *efx;
- struct efx_i2c_bit_operations *op;
- unsigned int sda:1;
- unsigned int scl:1;
-};
-
-extern int efx_i2c_check_presence(struct efx_i2c_interface *i2c, u8 device_id);
-extern int efx_i2c_fast_read(struct efx_i2c_interface *i2c,
- u8 device_id, u8 offset,
- u8 *data, unsigned int len);
-extern int efx_i2c_fast_write(struct efx_i2c_interface *i2c,
- u8 device_id, u8 offset,
- const u8 *data, unsigned int len);
-extern int efx_i2c_read(struct efx_i2c_interface *i2c,
- u8 device_id, u8 offset, u8 *data, unsigned int len);
-extern int efx_i2c_write(struct efx_i2c_interface *i2c,
- u8 device_id, u8 offset,
- const u8 *data, unsigned int len);
-
-extern int efx_i2c_send_bytes(struct efx_i2c_interface *i2c, u8 device_id,
- const u8 *bytes, unsigned int len);
-
-extern int efx_i2c_recv_bytes(struct efx_i2c_interface *i2c, u8 device_id,
- u8 *bytes, unsigned int len);
-
-
-/* Versions of the API that retry on failure. */
-extern int efx_i2c_check_presence_retry(struct efx_i2c_interface *i2c,
- u8 device_id);
-
-extern int efx_i2c_read_retry(struct efx_i2c_interface *i2c,
- u8 device_id, u8 offset, u8 *data, unsigned int len);
-
-extern int efx_i2c_write_retry(struct efx_i2c_interface *i2c,
- u8 device_id, u8 offset,
- const u8 *data, unsigned int len);
-
-#endif /* EFX_I2C_DIRECT_H */
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 5e20e75..d803b86 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -26,10 +26,10 @@
#include <linux/highmem.h>
#include <linux/workqueue.h>
#include <linux/inet_lro.h>
+#include <linux/i2c.h>
#include "enum.h"
#include "bitfield.h"
-#include "i2c-direct.h"
#define EFX_MAX_LRO_DESCRIPTORS 8
#define EFX_MAX_LRO_AGGR MAX_SKB_FRAGS
@@ -418,7 +418,10 @@ struct efx_blinker {
* @init_leds: Sets up board LEDs
* @set_fault_led: Turns the fault LED on or off
* @blink: Starts/stops blinking
+ * @fini: Cleanup function
* @blinker: used to blink LEDs in software
+ * @hwmon_client: I2C client for hardware monitor
+ * @ioexp_client: I2C client for power/port control
*/
struct efx_board {
int type;
@@ -431,7 +434,9 @@ struct efx_board {
int (*init_leds)(struct efx_nic *efx);
void (*set_fault_led) (struct efx_nic *efx, int state);
void (*blink) (struct efx_nic *efx, int start);
+ void (*fini) (struct efx_nic *nic);
struct efx_blinker blinker;
+ struct i2c_client *hwmon_client, *ioexp_client;
};
#define STRING_TABLE_LOOKUP(val, member) \
@@ -618,7 +623,7 @@ union efx_multicast_hash {
* @membase: Memory BAR value
* @biu_lock: BIU (bus interface unit) lock
* @interrupt_mode: Interrupt mode
- * @i2c: I2C interface
+ * @i2c_adap: I2C adapter
* @board_info: Board-level information
* @state: Device state flag. Serialised by the rtnl_lock.
* @reset_pending: Pending reset method (normally RESET_TYPE_NONE)
@@ -686,7 +691,7 @@ struct efx_nic {
spinlock_t biu_lock;
enum efx_int_mode interrupt_mode;
- struct efx_i2c_interface i2c;
+ struct i2c_adapter i2c_adap;
struct efx_board board_info;
enum nic_state state;
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
index 66a0d14..b278495 100644
--- a/drivers/net/sfc/sfe4001.c
+++ b/drivers/net/sfc/sfe4001.c
@@ -106,28 +106,27 @@
static const u8 xgphy_max_temperature = 90;
-void sfe4001_poweroff(struct efx_nic *efx)
+static void sfe4001_poweroff(struct efx_nic *efx)
{
- struct efx_i2c_interface *i2c = &efx->i2c;
+ struct i2c_client *ioexp_client = efx->board_info.ioexp_client;
+ struct i2c_client *hwmon_client = efx->board_info.hwmon_client;
- u8 cfg, out, in;
+ /* Turn off all power rails and disable outputs */
+ i2c_smbus_write_byte_data(ioexp_client, P0_OUT, 0xff);
+ i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG, 0xff);
+ i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0xff);
- EFX_INFO(efx, "%s\n", __func__);
-
- /* Turn off all power rails */
- out = 0xff;
- efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
-
- /* Disable port 1 outputs on IO expander */
- cfg = 0xff;
- efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
+ /* Clear any over-temperature alert */
+ i2c_smbus_read_byte_data(hwmon_client, RSL);
+}
- /* Disable port 0 outputs on IO expander */
- cfg = 0xff;
- efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
+static void sfe4001_fini(struct efx_nic *efx)
+{
+ EFX_INFO(efx, "%s\n", __func__);
- /* Clear any over-temperature alert */
- efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
+ sfe4001_poweroff(efx);
+ i2c_unregister_device(efx->board_info.ioexp_client);
+ i2c_unregister_device(efx->board_info.hwmon_client);
}
/* The P0_EN_3V3X line on SFE4001 boards (from A2 onward) is connected
@@ -143,14 +142,26 @@ MODULE_PARM_DESC(phy_flash_cfg,
* be turned on before the PHY can be used.
* Context: Process context, rtnl lock held
*/
-int sfe4001_poweron(struct efx_nic *efx)
+int sfe4001_init(struct efx_nic *efx)
{
- struct efx_i2c_interface *i2c = &efx->i2c;
+ struct i2c_client *hwmon_client, *ioexp_client;
unsigned int count;
int rc;
- u8 out, in, cfg;
+ u8 out;
efx_dword_t reg;
+ hwmon_client = i2c_new_dummy(&efx->i2c_adap, MAX6647);
+ if (!hwmon_client)
+ return -EIO;
+ efx->board_info.hwmon_client = hwmon_client;
+
+ ioexp_client = i2c_new_dummy(&efx->i2c_adap, PCA9539);
+ if (!ioexp_client) {
+ rc = -EIO;
+ goto fail_hwmon;
+ }
+ efx->board_info.ioexp_client = ioexp_client;
+
/* 10Xpress has fixed-function LED pins, so there is no board-specific
* blink code. */
efx->board_info.blink = tenxpress_phy_blink;
@@ -166,44 +177,45 @@ int sfe4001_poweron(struct efx_nic *efx)
falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC);
udelay(10);
+ efx->board_info.fini = sfe4001_fini;
+
/* Set DSP over-temperature alert threshold */
EFX_INFO(efx, "DSP cut-out at %dC\n", xgphy_max_temperature);
- rc = efx_i2c_write(i2c, MAX6647, WLHO,
- &xgphy_max_temperature, 1);
+ rc = i2c_smbus_write_byte_data(hwmon_client, WLHO,
+ xgphy_max_temperature);
if (rc)
- goto fail1;
+ goto fail_ioexp;
/* Read it back and verify */
- rc = efx_i2c_read(i2c, MAX6647, RLHN, &in, 1);
- if (rc)
- goto fail1;
- if (in != xgphy_max_temperature) {
+ rc = i2c_smbus_read_byte_data(hwmon_client, RLHN);
+ if (rc < 0)
+ goto fail_ioexp;
+ if (rc != xgphy_max_temperature) {
rc = -EFAULT;
- goto fail1;
+ goto fail_ioexp;
}
/* Clear any previous over-temperature alert */
- rc = efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
- if (rc)
- goto fail1;
+ rc = i2c_smbus_read_byte_data(hwmon_client, RSL);
+ if (rc < 0)
+ goto fail_ioexp;
/* Enable port 0 and port 1 outputs on IO expander */
- cfg = 0x00;
- rc = efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
+ rc = i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0x00);
if (rc)
- goto fail1;
- cfg = 0xff & ~(1 << P1_SPARE_LBN);
- rc = efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
+ goto fail_ioexp;
+ rc = i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG,
+ 0xff & ~(1 << P1_SPARE_LBN));
if (rc)
- goto fail2;
+ goto fail_on;
/* Turn all power off then wait 1 sec. This ensures PHY is reset */
out = 0xff & ~((0 << P0_EN_1V2_LBN) | (0 << P0_EN_2V5_LBN) |
(0 << P0_EN_3V3X_LBN) | (0 << P0_EN_5V_LBN) |
(0 << P0_EN_1V0X_LBN));
- rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+ rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
if (rc)
- goto fail3;
+ goto fail_on;
schedule_timeout_uninterruptible(HZ);
count = 0;
@@ -215,26 +227,26 @@ int sfe4001_poweron(struct efx_nic *efx)
if (sfe4001_phy_flash_cfg)
out |= 1 << P0_EN_3V3X_LBN;
- rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+ rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
if (rc)
- goto fail3;
+ goto fail_on;
msleep(10);
/* Turn on 1V power rail */
out &= ~(1 << P0_EN_1V0X_LBN);
- rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+ rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
if (rc)
- goto fail3;
+ goto fail_on;
EFX_INFO(efx, "waiting for power (attempt %d)...\n", count);
schedule_timeout_uninterruptible(HZ);
/* Check DSP is powered */
- rc = efx_i2c_read(i2c, PCA9539, P1_IN, &in, 1);
- if (rc)
- goto fail3;
- if (in & (1 << P1_AFE_PWD_LBN))
+ rc = i2c_smbus_read_byte_data(ioexp_client, P1_IN);
+ if (rc < 0)
+ goto fail_on;
+ if (rc & (1 << P1_AFE_PWD_LBN))
goto done;
/* DSP doesn't look powered in flash config mode */
@@ -244,23 +256,17 @@ int sfe4001_poweron(struct efx_nic *efx)
EFX_INFO(efx, "timed out waiting for power\n");
rc = -ETIMEDOUT;
- goto fail3;
+ goto fail_on;
done:
EFX_INFO(efx, "PHY is powered on\n");
return 0;
-fail3:
- /* Turn off all power rails */
- out = 0xff;
- efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
- /* Disable port 1 outputs on IO expander */
- out = 0xff;
- efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1);
-fail2:
- /* Disable port 0 outputs on IO expander */
- out = 0xff;
- efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1);
-fail1:
+fail_on:
+ sfe4001_poweroff(efx);
+fail_ioexp:
+ i2c_unregister_device(ioexp_client);
+fail_hwmon:
+ i2c_unregister_device(hwmon_client);
return rc;
}
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 535f6cc..c83406f 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -284,6 +284,86 @@ static void sky2_power_aux(struct sky2_hw *hw)
PC_VAUX_ON | PC_VCC_OFF));
}
+static void sky2_power_state(struct sky2_hw *hw, pci_power_t state)
+{
+ u16 power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
+ int pex = pci_find_capability(hw->pdev, PCI_CAP_ID_EXP);
+ u32 reg;
+
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+
+ switch (state) {
+ case PCI_D0:
+ break;
+
+ case PCI_D1:
+ power_control |= 1;
+ break;
+
+ case PCI_D2:
+ power_control |= 2;
+ break;
+
+ case PCI_D3hot:
+ case PCI_D3cold:
+ power_control |= 3;
+ if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
+ /* additional power saving measurements */
+ reg = sky2_pci_read32(hw, PCI_DEV_REG4);
+
+ /* set gating core clock for LTSSM in L1 state */
+ reg |= P_PEX_LTSSM_STAT(P_PEX_LTSSM_L1_STAT) |
+ /* auto clock gated scheme controlled by CLKREQ */
+ P_ASPM_A1_MODE_SELECT |
+ /* enable Gate Root Core Clock */
+ P_CLK_GATE_ROOT_COR_ENA;
+
+ if (pex && (hw->flags & SKY2_HW_CLK_POWER)) {
+ /* enable Clock Power Management (CLKREQ) */
+ u16 ctrl = sky2_pci_read16(hw, pex + PCI_EXP_DEVCTL);
+
+ ctrl |= PCI_EXP_DEVCTL_AUX_PME;
+ sky2_pci_write16(hw, pex + PCI_EXP_DEVCTL, ctrl);
+ } else
+ /* force CLKREQ Enable in Our4 (A1b only) */
+ reg |= P_ASPM_FORCE_CLKREQ_ENA;
+
+ /* set Mask Register for Release/Gate Clock */
+ sky2_pci_write32(hw, PCI_DEV_REG5,
+ P_REL_PCIE_EXIT_L1_ST | P_GAT_PCIE_ENTER_L1_ST |
+ P_REL_PCIE_RX_EX_IDLE | P_GAT_PCIE_RX_EL_IDLE |
+ P_REL_GPHY_LINK_UP | P_GAT_GPHY_LINK_DOWN);
+ } else
+ sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_CLK_HALT);
+
+ /* put CPU into reset state */
+ sky2_write8(hw, B28_Y2_ASF_STAT_CMD, HCU_CCSR_ASF_RESET);
+ if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev == CHIP_REV_YU_SU_A0)
+ /* put CPU into halt state */
+ sky2_write8(hw, B28_Y2_ASF_STAT_CMD, HCU_CCSR_ASF_HALTED);
+
+ if (pex && !(hw->flags & SKY2_HW_RAM_BUFFER)) {
+ reg = sky2_pci_read32(hw, PCI_DEV_REG1);
+ /* force to PCIe L1 */
+ reg |= PCI_FORCE_PEX_L1;
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg);
+ }
+ break;
+
+ default:
+ dev_warn(&hw->pdev->dev, PFX "Invalid power state (%d) ",
+ state);
+ return;
+ }
+
+ power_control |= PCI_PM_CTRL_PME_ENABLE;
+ /* Finally, set the new power state. */
+ sky2_pci_write32(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
+
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+ sky2_pci_read32(hw, B0_CTST);
+}
+
static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
{
u16 reg;
@@ -619,28 +699,71 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
}
-static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
+static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
+static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
+
+static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
{
u32 reg1;
- static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
- static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
- /* Turn on/off phy power saving */
- if (onoff)
- reg1 &= ~phy_power[port];
- else
- reg1 |= phy_power[port];
+ reg1 &= ~phy_power[port];
- if (onoff && hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
reg1 |= coma_mode[port];
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
sky2_pci_read32(hw, PCI_DEV_REG1);
+}
+
+static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
+{
+ u32 reg1;
+ u16 ctrl;
+
+ /* release GPHY Control reset */
+ sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
- udelay(100);
+ /* release GMAC reset */
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+
+ if (hw->flags & SKY2_HW_NEWER_PHY) {
+ /* select page 2 to access MAC control register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
+
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ /* allow GMII Power Down */
+ ctrl &= ~PHY_M_MAC_GMIF_PUP;
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+ /* set page register back to 0 */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
+ }
+
+ /* setup General Purpose Control Register */
+ gma_write16(hw, port, GM_GP_CTRL,
+ GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 | GM_GPCR_AU_ALL_DIS);
+
+ if (hw->chip_id != CHIP_ID_YUKON_EC) {
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+
+ /* enable Power Down */
+ ctrl |= PHY_M_PC_POW_D_ENA;
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+ }
+
+ /* set IEEE compatible Power Down Mode (dev. #4.99) */
+ gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN);
+ }
+
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+ reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
/* Force a renegotiation */
@@ -675,8 +798,11 @@ static void sky2_wol_init(struct sky2_port *sky2)
sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
sky2->flow_mode = FC_NONE;
- sky2_phy_power(hw, port, 1);
- sky2_phy_reinit(sky2);
+
+ spin_lock_bh(&sky2->phy_lock);
+ sky2_phy_power_up(hw, port);
+ sky2_phy_init(hw, port);
+ spin_unlock_bh(&sky2->phy_lock);
sky2->flow_mode = save_mode;
sky2->advertising = ctrl;
@@ -781,6 +907,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
spin_lock_bh(&sky2->phy_lock);
+ sky2_phy_power_up(hw, port);
sky2_phy_init(hw, port);
spin_unlock_bh(&sky2->phy_lock);
@@ -1385,8 +1512,6 @@ static int sky2_up(struct net_device *dev)
if (!sky2->rx_ring)
goto err_out;
- sky2_phy_power(hw, port, 1);
-
sky2_mac_init(hw, port);
/* Register is number of 4K blocks on internal RAM buffer. */
@@ -1767,7 +1892,7 @@ static int sky2_down(struct net_device *dev)
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
- sky2_phy_power(hw, port, 0);
+ sky2_phy_power_down(hw, port);
netif_carrier_off(dev);
@@ -2741,6 +2866,10 @@ static int __devinit sky2_init(struct sky2_hw *hw)
hw->flags = SKY2_HW_GIGABIT
| SKY2_HW_NEWER_PHY
| SKY2_HW_ADV_POWER_CTL;
+
+ /* check for Rev. A1 dev 4200 */
+ if (sky2_read16(hw, Q_ADDR(Q_XA1, Q_WM)) == 0)
+ hw->flags |= SKY2_HW_CLK_POWER;
break;
case CHIP_ID_YUKON_EX:
@@ -2791,6 +2920,11 @@ static int __devinit sky2_init(struct sky2_hw *hw)
if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P')
hw->flags |= SKY2_HW_FIBRE_PHY;
+ hw->pm_cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PM);
+ if (hw->pm_cap == 0) {
+ dev_err(&hw->pdev->dev, "cannot find PowerManagement capability\n");
+ return -EIO;
+ }
hw->ports = 1;
t8 = sky2_read8(hw, B2_Y2_HW_RES);
@@ -4362,7 +4496,7 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
pci_save_state(pdev);
pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ sky2_power_state(hw, pci_choose_state(pdev, state));
return 0;
}
@@ -4375,9 +4509,7 @@ static int sky2_resume(struct pci_dev *pdev)
if (!hw)
return 0;
- err = pci_set_power_state(pdev, PCI_D0);
- if (err)
- goto out;
+ sky2_power_state(hw, PCI_D0);
err = pci_restore_state(pdev);
if (err)
@@ -4445,8 +4577,7 @@ static void sky2_shutdown(struct pci_dev *pdev)
pci_enable_wake(pdev, PCI_D3cold, wol);
pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
-
+ sky2_power_state(hw, PCI_D3hot);
}
static struct pci_driver sky2_driver = {
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index c0a5eea..1fa82bf 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -28,6 +28,11 @@ enum pci_dev_reg_1 {
PCI_Y2_PHY2_POWD = 1<<27, /* Set PHY 2 to Power Down (YUKON-2) */
PCI_Y2_PHY1_POWD = 1<<26, /* Set PHY 1 to Power Down (YUKON-2) */
PCI_Y2_PME_LEGACY= 1<<15, /* PCI Express legacy power management mode */
+
+ PCI_PHY_LNK_TIM_MSK= 3L<<8,/* Bit 9.. 8: GPHY Link Trigger Timer */
+ PCI_ENA_L1_EVENT = 1<<7, /* Enable PEX L1 Event */
+ PCI_ENA_GPHY_LNK = 1<<6, /* Enable PEX L1 on GPHY Link down */
+ PCI_FORCE_PEX_L1 = 1<<5, /* Force to PEX L1 */
};
enum pci_dev_reg_2 {
@@ -45,7 +50,11 @@ enum pci_dev_reg_2 {
/* PCI_OUR_REG_4 32 bit Our Register 4 (Yukon-ECU only) */
enum pci_dev_reg_4 {
- /* (Link Training & Status State Machine) */
+ /* (Link Training & Status State Machine) */
+ P_PEX_LTSSM_STAT_MSK = 0x7fL<<25, /* Bit 31..25: PEX LTSSM Mask */
+#define P_PEX_LTSSM_STAT(x) ((x << 25) & P_PEX_LTSSM_STAT_MSK)
+ P_PEX_LTSSM_L1_STAT = 0x34,
+ P_PEX_LTSSM_DET_STAT = 0x01,
P_TIMER_VALUE_MSK = 0xffL<<16, /* Bit 23..16: Timer Value Mask */
/* (Active State Power Management) */
P_FORCE_ASPM_REQUEST = 1<<15, /* Force ASPM Request (A1 only) */
@@ -454,6 +463,9 @@ enum yukon_ex_rev {
CHIP_REV_YU_EX_A0 = 1,
CHIP_REV_YU_EX_B0 = 2,
};
+enum yukon_supr_rev {
+ CHIP_REV_YU_SU_A0 = 0,
+};
/* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */
@@ -1143,6 +1155,12 @@ enum {
PHY_M_PC_ENA_AUTO = 3, /* 11 = Enable Automatic Crossover */
};
+/* for Yukon-EC Ultra Gigabit Ethernet PHY (88E1149 only) */
+enum {
+ PHY_M_PC_COP_TX_DIS = 1<<3, /* Copper Transmitter Disable */
+ PHY_M_PC_POW_D_ENA = 1<<2, /* Power Down Enable */
+};
+
/* for 10/100 Fast Ethernet PHY (88E3082 only) */
enum {
PHY_M_PC_ENA_DTE_DT = 1<<15, /* Enable Data Terminal Equ. (DTE) Detect */
@@ -1411,6 +1429,7 @@ enum {
/***** PHY_MARV_PHY_CTRL (page 2) 16 bit r/w MAC Specific Ctrl *****/
enum {
PHY_M_MAC_MD_MSK = 7<<7, /* Bit 9.. 7: Mode Select Mask */
+ PHY_M_MAC_GMIF_PUP = 1<<3, /* GMII Power Up (88E1149 only) */
PHY_M_MAC_MD_AUTO = 3,/* Auto Copper/1000Base-X */
PHY_M_MAC_MD_COPPER = 5,/* Copper only */
PHY_M_MAC_MD_1000BX = 7,/* 1000Base-X only */
@@ -2052,7 +2071,9 @@ struct sky2_hw {
#define SKY2_HW_NEW_LE 0x00000020 /* new LSOv2 format */
#define SKY2_HW_AUTO_TX_SUM 0x00000040 /* new IP decode for Tx */
#define SKY2_HW_ADV_POWER_CTL 0x00000080 /* additional PHY power regs */
+#define SKY2_HW_CLK_POWER 0x00000100 /* clock power management */
+ int pm_cap;
u8 chip_id;
u8 chip_rev;
u8 pmd_type;
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 0166407..85246ed 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -13,8 +13,6 @@
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
- ** This file is best viewed/edited with columns>=132.
- *
** Useful (if not required) reading:
*
* Texas Instruments, ThunderLAN Programmer's Guide,
@@ -218,9 +216,7 @@ static int bbuf;
module_param(bbuf, int, 0);
MODULE_PARM_DESC(bbuf, "ThunderLAN use big buffer (0-1)");
-static u8 *TLanPadBuffer;
-static dma_addr_t TLanPadBufferDMA;
-static char TLanSignature[] = "TLAN";
+static const char TLanSignature[] = "TLAN";
static const char tlan_banner[] = "ThunderLAN driver v1.15\n";
static int tlan_have_pci;
static int tlan_have_eisa;
@@ -238,9 +234,11 @@ static struct board {
{ "Compaq Netelligent 10 T PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
{ "Compaq Netelligent 10/100 TX PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
{ "Compaq Integrated NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
- { "Compaq NetFlex-3/P", TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
+ { "Compaq NetFlex-3/P",
+ TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
{ "Compaq NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
- { "Compaq Netelligent Integrated 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
+ { "Compaq Netelligent Integrated 10/100 TX UTP",
+ TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
{ "Compaq Netelligent Dual 10/100 TX PCI UTP", TLAN_ADAPTER_NONE, 0x83 },
{ "Compaq Netelligent 10/100 TX Embedded UTP", TLAN_ADAPTER_NONE, 0x83 },
{ "Olicom OC-2183/2185", TLAN_ADAPTER_USE_INTERN_10, 0x83 },
@@ -248,8 +246,9 @@ static struct board {
{ "Olicom OC-2326", TLAN_ADAPTER_USE_INTERN_10, 0xF8 },
{ "Compaq Netelligent 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
{ "Compaq Netelligent 10 T/2 PCI UTP/Coax", TLAN_ADAPTER_NONE, 0x83 },
- { "Compaq NetFlex-3/E", TLAN_ADAPTER_ACTIVITY_LED | /* EISA card */
- TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
+ { "Compaq NetFlex-3/E",
+ TLAN_ADAPTER_ACTIVITY_LED | /* EISA card */
+ TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
{ "Compaq NetFlex-3/E", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, /* EISA card */
};
@@ -294,12 +293,12 @@ static int TLan_Close( struct net_device *);
static struct net_device_stats *TLan_GetStats( struct net_device *);
static void TLan_SetMulticastList( struct net_device *);
static int TLan_ioctl( struct net_device *dev, struct ifreq *rq, int cmd);
-static int TLan_probe1( struct pci_dev *pdev, long ioaddr, int irq, int rev, const struct pci_device_id *ent);
+static int TLan_probe1( struct pci_dev *pdev, long ioaddr,
+ int irq, int rev, const struct pci_device_id *ent);
static void TLan_tx_timeout( struct net_device *dev);
static void TLan_tx_timeout_work(struct work_struct *work);
static int tlan_init_one( struct pci_dev *pdev, const struct pci_device_id *ent);
-static u32 TLan_HandleInvalid( struct net_device *, u16 );
static u32 TLan_HandleTxEOF( struct net_device *, u16 );
static u32 TLan_HandleStatOverflow( struct net_device *, u16 );
static u32 TLan_HandleRxEOF( struct net_device *, u16 );
@@ -348,29 +347,27 @@ static void TLan_EeReceiveByte( u16, u8 *, int );
static int TLan_EeReadByte( struct net_device *, u8, u8 * );
-static void
+static inline void
TLan_StoreSKB( struct tlan_list_tag *tag, struct sk_buff *skb)
{
unsigned long addr = (unsigned long)skb;
- tag->buffer[9].address = (u32)addr;
- addr >>= 31; /* >>= 32 is undefined for 32bit arch, stupid C */
- addr >>= 1;
- tag->buffer[8].address = (u32)addr;
+ tag->buffer[9].address = addr;
+ tag->buffer[8].address = upper_32_bits(addr);
}
-static struct sk_buff *
-TLan_GetSKB( struct tlan_list_tag *tag)
+static inline struct sk_buff *
+TLan_GetSKB( const struct tlan_list_tag *tag)
{
- unsigned long addr = tag->buffer[8].address;
- addr <<= 31;
- addr <<= 1;
- addr |= tag->buffer[9].address;
+ unsigned long addr;
+
+ addr = tag->buffer[8].address;
+ addr |= (tag->buffer[9].address << 16) << 16;
return (struct sk_buff *) addr;
}
static TLanIntVectorFunc *TLanIntVector[TLAN_INT_NUMBER_OF_INTS] = {
- TLan_HandleInvalid,
+ NULL,
TLan_HandleTxEOF,
TLan_HandleStatOverflow,
TLan_HandleRxEOF,
@@ -444,7 +441,9 @@ static void __devexit tlan_remove_one( struct pci_dev *pdev)
unregister_netdev( dev );
if ( priv->dmaStorage ) {
- pci_free_consistent(priv->pciDev, priv->dmaSize, priv->dmaStorage, priv->dmaStorageDMA );
+ pci_free_consistent(priv->pciDev,
+ priv->dmaSize, priv->dmaStorage,
+ priv->dmaStorageDMA );
}
#ifdef CONFIG_PCI
@@ -469,16 +468,6 @@ static int __init tlan_probe(void)
printk(KERN_INFO "%s", tlan_banner);
- TLanPadBuffer = (u8 *) pci_alloc_consistent(NULL, TLAN_MIN_FRAME_SIZE, &TLanPadBufferDMA);
-
- if (TLanPadBuffer == NULL) {
- printk(KERN_ERR "TLAN: Could not allocate memory for pad buffer.\n");
- rc = -ENOMEM;
- goto err_out;
- }
-
- memset(TLanPadBuffer, 0, TLAN_MIN_FRAME_SIZE);
-
TLAN_DBG(TLAN_DEBUG_PROBE, "Starting PCI Probe....\n");
/* Use new style PCI probing. Now the kernel will
@@ -506,8 +495,6 @@ static int __init tlan_probe(void)
err_out_pci_unreg:
pci_unregister_driver(&tlan_driver);
err_out_pci_free:
- pci_free_consistent(NULL, TLAN_MIN_FRAME_SIZE, TLanPadBuffer, TLanPadBufferDMA);
-err_out:
return rc;
}
@@ -539,7 +526,8 @@ static int __devinit tlan_init_one( struct pci_dev *pdev,
**************************************************************/
static int __devinit TLan_probe1(struct pci_dev *pdev,
- long ioaddr, int irq, int rev, const struct pci_device_id *ent )
+ long ioaddr, int irq, int rev,
+ const struct pci_device_id *ent )
{
struct net_device *dev;
@@ -625,8 +613,10 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
/* Kernel parameters */
if (dev->mem_start) {
priv->aui = dev->mem_start & 0x01;
- priv->duplex = ((dev->mem_start & 0x06) == 0x06) ? 0 : (dev->mem_start & 0x06) >> 1;
- priv->speed = ((dev->mem_start & 0x18) == 0x18) ? 0 : (dev->mem_start & 0x18) >> 3;
+ priv->duplex = ((dev->mem_start & 0x06) == 0x06) ? 0
+ : (dev->mem_start & 0x06) >> 1;
+ priv->speed = ((dev->mem_start & 0x18) == 0x18) ? 0
+ : (dev->mem_start & 0x18) >> 3;
if (priv->speed == 0x1) {
priv->speed = TLAN_SPEED_10;
@@ -706,7 +696,8 @@ static void TLan_Eisa_Cleanup(void)
dev = TLan_Eisa_Devices;
priv = netdev_priv(dev);
if (priv->dmaStorage) {
- pci_free_consistent(priv->pciDev, priv->dmaSize, priv->dmaStorage, priv->dmaStorageDMA );
+ pci_free_consistent(priv->pciDev, priv->dmaSize,
+ priv->dmaStorage, priv->dmaStorageDMA );
}
release_region( dev->base_addr, 0x10);
unregister_netdev( dev );
@@ -724,8 +715,6 @@ static void __exit tlan_exit(void)
if (tlan_have_eisa)
TLan_Eisa_Cleanup();
- pci_free_consistent(NULL, TLAN_MIN_FRAME_SIZE, TLanPadBuffer, TLanPadBufferDMA);
-
}
@@ -763,8 +752,10 @@ static void __init TLan_EisaProbe (void)
/* Loop through all slots of the EISA bus */
for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) {
- TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n", (int) ioaddr + 0xC80, inw(ioaddr + EISA_ID));
- TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n", (int) ioaddr + 0xC82, inw(ioaddr + EISA_ID2));
+ TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n",
+ (int) ioaddr + 0xC80, inw(ioaddr + EISA_ID));
+ TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n",
+ (int) ioaddr + 0xC82, inw(ioaddr + EISA_ID2));
TLAN_DBG(TLAN_DEBUG_PROBE, "Probing for EISA adapter at IO: 0x%4x : ",
@@ -874,7 +865,8 @@ static int TLan_Init( struct net_device *dev )
dma_size = ( TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS )
* ( sizeof(TLanList) );
}
- priv->dmaStorage = pci_alloc_consistent(priv->pciDev, dma_size, &priv->dmaStorageDMA);
+ priv->dmaStorage = pci_alloc_consistent(priv->pciDev,
+ dma_size, &priv->dmaStorageDMA);
priv->dmaSize = dma_size;
if ( priv->dmaStorage == NULL ) {
@@ -883,16 +875,19 @@ static int TLan_Init( struct net_device *dev )
return -ENOMEM;
}
memset( priv->dmaStorage, 0, dma_size );
- priv->rxList = (TLanList *)
- ( ( ( (u32) priv->dmaStorage ) + 7 ) & 0xFFFFFFF8 );
- priv->rxListDMA = ( ( ( (u32) priv->dmaStorageDMA ) + 7 ) & 0xFFFFFFF8 );
+ priv->rxList = (TLanList *) ALIGN((unsigned long)priv->dmaStorage, 8);
+ priv->rxListDMA = ALIGN(priv->dmaStorageDMA, 8);
priv->txList = priv->rxList + TLAN_NUM_RX_LISTS;
priv->txListDMA = priv->rxListDMA + sizeof(TLanList) * TLAN_NUM_RX_LISTS;
+
if ( bbuf ) {
priv->rxBuffer = (u8 *) ( priv->txList + TLAN_NUM_TX_LISTS );
- priv->rxBufferDMA =priv->txListDMA + sizeof(TLanList) * TLAN_NUM_TX_LISTS;
- priv->txBuffer = priv->rxBuffer + ( TLAN_NUM_RX_LISTS * TLAN_MAX_FRAME_SIZE );
- priv->txBufferDMA = priv->rxBufferDMA + ( TLAN_NUM_RX_LISTS * TLAN_MAX_FRAME_SIZE );
+ priv->rxBufferDMA =priv->txListDMA
+ + sizeof(TLanList) * TLAN_NUM_TX_LISTS;
+ priv->txBuffer = priv->rxBuffer
+ + ( TLAN_NUM_RX_LISTS * TLAN_MAX_FRAME_SIZE );
+ priv->txBufferDMA = priv->rxBufferDMA
+ + ( TLAN_NUM_RX_LISTS * TLAN_MAX_FRAME_SIZE );
}
err = 0;
@@ -952,10 +947,12 @@ static int TLan_Open( struct net_device *dev )
int err;
priv->tlanRev = TLan_DioRead8( dev->base_addr, TLAN_DEF_REVISION );
- err = request_irq( dev->irq, TLan_HandleInterrupt, IRQF_SHARED, TLanSignature, dev );
+ err = request_irq( dev->irq, TLan_HandleInterrupt, IRQF_SHARED,
+ dev->name, dev );
if ( err ) {
- printk(KERN_ERR "TLAN: Cannot open %s because IRQ %d is already in use.\n", dev->name, dev->irq );
+ pr_err("TLAN: Cannot open %s because IRQ %d is already in use.\n",
+ dev->name, dev->irq );
return err;
}
@@ -969,7 +966,8 @@ static int TLan_Open( struct net_device *dev )
TLan_ReadAndClearStats( dev, TLAN_IGNORE );
TLan_ResetAdapter( dev );
- TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Opened. TLAN Chip Rev: %x\n", dev->name, priv->tlanRev );
+ TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Opened. TLAN Chip Rev: %x\n",
+ dev->name, priv->tlanRev );
return 0;
@@ -1007,14 +1005,16 @@ static int TLan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
case SIOCGMIIREG: /* Read MII PHY register. */
- TLan_MiiReadReg(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, &data->val_out);
+ TLan_MiiReadReg(dev, data->phy_id & 0x1f,
+ data->reg_num & 0x1f, &data->val_out);
return 0;
case SIOCSMIIREG: /* Write MII PHY register. */
if (!capable(CAP_NET_ADMIN))
return -EPERM;
- TLan_MiiWriteReg(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
+ TLan_MiiWriteReg(dev, data->phy_id & 0x1f,
+ data->reg_num & 0x1f, data->val_in);
return 0;
default:
return -EOPNOTSUPP;
@@ -1096,20 +1096,25 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
TLanList *tail_list;
dma_addr_t tail_list_phys;
u8 *tail_buffer;
- int pad;
unsigned long flags;
if ( ! priv->phyOnline ) {
- TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n", dev->name );
+ TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n",
+ dev->name );
dev_kfree_skb_any(skb);
return 0;
}
+ if (skb_padto(skb, TLAN_MIN_FRAME_SIZE))
+ return 0;
+
tail_list = priv->txList + priv->txTail;
tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail;
if ( tail_list->cStat != TLAN_CSTAT_UNUSED ) {
- TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s is busy (Head=%d Tail=%d)\n", dev->name, priv->txHead, priv->txTail );
+ TLAN_DBG( TLAN_DEBUG_TX,
+ "TRANSMIT: %s is busy (Head=%d Tail=%d)\n",
+ dev->name, priv->txHead, priv->txTail );
netif_stop_queue(dev);
priv->txBusyCount++;
return 1;
@@ -1121,37 +1126,34 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE );
skb_copy_from_linear_data(skb, tail_buffer, skb->len);
} else {
- tail_list->buffer[0].address = pci_map_single(priv->pciDev, skb->data, skb->len, PCI_DMA_TODEVICE);
+ tail_list->buffer[0].address = pci_map_single(priv->pciDev,
+ skb->data, skb->len,
+ PCI_DMA_TODEVICE);
TLan_StoreSKB(tail_list, skb);
}
- pad = TLAN_MIN_FRAME_SIZE - skb->len;
-
- if ( pad > 0 ) {
- tail_list->frameSize = (u16) skb->len + pad;
- tail_list->buffer[0].count = (u32) skb->len;
- tail_list->buffer[1].count = TLAN_LAST_BUFFER | (u32) pad;
- tail_list->buffer[1].address = TLanPadBufferDMA;
- } else {
- tail_list->frameSize = (u16) skb->len;
- tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len;
- tail_list->buffer[1].count = 0;
- tail_list->buffer[1].address = 0;
- }
+ tail_list->frameSize = (u16) skb->len;
+ tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len;
+ tail_list->buffer[1].count = 0;
+ tail_list->buffer[1].address = 0;
spin_lock_irqsave(&priv->lock, flags);
tail_list->cStat = TLAN_CSTAT_READY;
if ( ! priv->txInProgress ) {
priv->txInProgress = 1;
- TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Starting TX on buffer %d\n", priv->txTail );
+ TLAN_DBG( TLAN_DEBUG_TX,
+ "TRANSMIT: Starting TX on buffer %d\n", priv->txTail );
outl( tail_list_phys, dev->base_addr + TLAN_CH_PARM );
outl( TLAN_HC_GO, dev->base_addr + TLAN_HOST_CMD );
} else {
- TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Adding buffer %d to TX channel\n", priv->txTail );
+ TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Adding buffer %d to TX channel\n",
+ priv->txTail );
if ( priv->txTail == 0 ) {
- ( priv->txList + ( TLAN_NUM_TX_LISTS - 1 ) )->forward = tail_list_phys;
+ ( priv->txList + ( TLAN_NUM_TX_LISTS - 1 ) )->forward
+ = tail_list_phys;
} else {
- ( priv->txList + ( priv->txTail - 1 ) )->forward = tail_list_phys;
+ ( priv->txList + ( priv->txTail - 1 ) )->forward
+ = tail_list_phys;
}
}
spin_unlock_irqrestore(&priv->lock, flags);
@@ -1191,33 +1193,31 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
static irqreturn_t TLan_HandleInterrupt(int irq, void *dev_id)
{
- u32 ack;
- struct net_device *dev;
- u32 host_cmd;
+ struct net_device *dev = dev_id;
+ TLanPrivateInfo *priv = netdev_priv(dev);
u16 host_int;
- int type;
- TLanPrivateInfo *priv;
-
- dev = dev_id;
- priv = netdev_priv(dev);
+ u16 type;
spin_lock(&priv->lock);
host_int = inw( dev->base_addr + TLAN_HOST_INT );
- outw( host_int, dev->base_addr + TLAN_HOST_INT );
-
type = ( host_int & TLAN_HI_IT_MASK ) >> 2;
+ if ( type ) {
+ u32 ack;
+ u32 host_cmd;
- ack = TLanIntVector[type]( dev, host_int );
+ outw( host_int, dev->base_addr + TLAN_HOST_INT );
+ ack = TLanIntVector[type]( dev, host_int );
- if ( ack ) {
- host_cmd = TLAN_HC_ACK | ack | ( type << 18 );
- outl( host_cmd, dev->base_addr + TLAN_HOST_CMD );
+ if ( ack ) {
+ host_cmd = TLAN_HC_ACK | ack | ( type << 18 );
+ outl( host_cmd, dev->base_addr + TLAN_HOST_CMD );
+ }
}
spin_unlock(&priv->lock);
- return IRQ_HANDLED;
+ return IRQ_RETVAL(type);
} /* TLan_HandleInterrupts */
@@ -1286,8 +1286,10 @@ static struct net_device_stats *TLan_GetStats( struct net_device *dev )
/* Should only read stats if open ? */
TLan_ReadAndClearStats( dev, TLAN_RECORD );
- TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE: %s EOC count = %d\n", dev->name, priv->rxEocCount );
- TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s Busy count = %d\n", dev->name, priv->txBusyCount );
+ TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE: %s EOC count = %d\n", dev->name,
+ priv->rxEocCount );
+ TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s Busy count = %d\n", dev->name,
+ priv->txBusyCount );
if ( debug & TLAN_DEBUG_GNRL ) {
TLan_PrintDio( dev->base_addr );
TLan_PhyPrint( dev );
@@ -1299,7 +1301,7 @@ static struct net_device_stats *TLan_GetStats( struct net_device *dev )
TLan_PrintList( priv->txList + i, "TX", i );
}
- return ( &( (TLanPrivateInfo *) netdev_priv(dev) )->stats );
+ return &dev->stats;
} /* TLan_GetStats */
@@ -1337,10 +1339,12 @@ static void TLan_SetMulticastList( struct net_device *dev )
if ( dev->flags & IFF_PROMISC ) {
tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
- TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF );
+ TLan_DioWrite8( dev->base_addr,
+ TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF );
} else {
tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
- TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF );
+ TLan_DioWrite8( dev->base_addr,
+ TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF );
if ( dev->flags & IFF_ALLMULTI ) {
for ( i = 0; i < 3; i++ )
TLan_SetMac( dev, i + 1, NULL );
@@ -1349,7 +1353,8 @@ static void TLan_SetMulticastList( struct net_device *dev )
} else {
for ( i = 0; i < dev->mc_count; i++ ) {
if ( i < 3 ) {
- TLan_SetMac( dev, i + 1, (char *) &dmi->dmi_addr );
+ TLan_SetMac( dev, i + 1,
+ (char *) &dmi->dmi_addr );
} else {
offset = TLan_HashFunc( (u8 *) &dmi->dmi_addr );
if ( offset < 32 )
@@ -1383,31 +1388,6 @@ static void TLan_SetMulticastList( struct net_device *dev )
*****************************************************************************/
- /***************************************************************
- * TLan_HandleInvalid
- *
- * Returns:
- * 0
- * Parms:
- * dev Device assigned the IRQ that was
- * raised.
- * host_int The contents of the HOST_INT
- * port.
- *
- * This function handles invalid interrupts. This should
- * never happen unless some other adapter is trying to use
- * the IRQ line assigned to the device.
- *
- **************************************************************/
-
-static u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int )
-{
- /* printk( "TLAN: Invalid interrupt on %s.\n", dev->name ); */
- return 0;
-
-} /* TLan_HandleInvalid */
-
-
/***************************************************************
@@ -1441,14 +1421,16 @@ static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
u32 ack = 0;
u16 tmpCStat;
- TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Handling TX EOF (Head=%d Tail=%d)\n", priv->txHead, priv->txTail );
+ TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Handling TX EOF (Head=%d Tail=%d)\n",
+ priv->txHead, priv->txTail );
head_list = priv->txList + priv->txHead;
while (((tmpCStat = head_list->cStat ) & TLAN_CSTAT_FRM_CMP) && (ack < 255)) {
ack++;
if ( ! bbuf ) {
struct sk_buff *skb = TLan_GetSKB(head_list);
- pci_unmap_single(priv->pciDev, head_list->buffer[0].address, skb->len, PCI_DMA_TODEVICE);
+ pci_unmap_single(priv->pciDev, head_list->buffer[0].address,
+ skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb_any(skb);
head_list->buffer[8].address = 0;
head_list->buffer[9].address = 0;
@@ -1457,7 +1439,7 @@ static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
if ( tmpCStat & TLAN_CSTAT_EOC )
eoc = 1;
- priv->stats.tx_bytes += head_list->frameSize;
+ dev->stats.tx_bytes += head_list->frameSize;
head_list->cStat = TLAN_CSTAT_UNUSED;
netif_start_queue(dev);
@@ -1469,7 +1451,9 @@ static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
printk(KERN_INFO "TLAN: Received interrupt for uncompleted TX frame.\n");
if ( eoc ) {
- TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Handling TX EOC (Head=%d Tail=%d)\n", priv->txHead, priv->txTail );
+ TLAN_DBG( TLAN_DEBUG_TX,
+ "TRANSMIT: Handling TX EOC (Head=%d Tail=%d)\n",
+ priv->txHead, priv->txTail );
head_list = priv->txList + priv->txHead;
head_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txHead;
if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
@@ -1481,7 +1465,8 @@ static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
}
if ( priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED ) {
- TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
+ TLan_DioWrite8( dev->base_addr,
+ TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
if ( priv->timer.function == NULL ) {
priv->timer.function = &TLan_Timer;
priv->timer.data = (unsigned long) dev;
@@ -1563,66 +1548,65 @@ static u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
TLanList *head_list;
struct sk_buff *skb;
TLanList *tail_list;
- void *t;
- u32 frameSize;
u16 tmpCStat;
dma_addr_t head_list_phys;
- TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE: Handling RX EOF (Head=%d Tail=%d)\n", priv->rxHead, priv->rxTail );
+ TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE: Handling RX EOF (Head=%d Tail=%d)\n",
+ priv->rxHead, priv->rxTail );
head_list = priv->rxList + priv->rxHead;
head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
while (((tmpCStat = head_list->cStat) & TLAN_CSTAT_FRM_CMP) && (ack < 255)) {
- frameSize = head_list->frameSize;
+ dma_addr_t frameDma = head_list->buffer[0].address;
+ u32 frameSize = head_list->frameSize;
ack++;
if (tmpCStat & TLAN_CSTAT_EOC)
eoc = 1;
if (bbuf) {
- skb = dev_alloc_skb(frameSize + 7);
- if (skb == NULL)
- printk(KERN_INFO "TLAN: Couldn't allocate memory for received data.\n");
- else {
- head_buffer = priv->rxBuffer + (priv->rxHead * TLAN_MAX_FRAME_SIZE);
- skb_reserve(skb, 2);
- t = (void *) skb_put(skb, frameSize);
-
- priv->stats.rx_bytes += head_list->frameSize;
-
- memcpy( t, head_buffer, frameSize );
- skb->protocol = eth_type_trans( skb, dev );
- netif_rx( skb );
- }
+ skb = netdev_alloc_skb(dev, frameSize + 7);
+ if ( !skb )
+ goto drop_and_reuse;
+
+ head_buffer = priv->rxBuffer
+ + (priv->rxHead * TLAN_MAX_FRAME_SIZE);
+ skb_reserve(skb, 2);
+ pci_dma_sync_single_for_cpu(priv->pciDev,
+ frameDma, frameSize,
+ PCI_DMA_FROMDEVICE);
+ skb_copy_from_linear_data(skb, head_buffer, frameSize);
+ skb_put(skb, frameSize);
+ dev->stats.rx_bytes += frameSize;
+
+ skb->protocol = eth_type_trans( skb, dev );
+ netif_rx( skb );
} else {
struct sk_buff *new_skb;
- /*
- * I changed the algorithm here. What we now do
- * is allocate the new frame. If this fails we
- * simply recycle the frame.
- */
+ new_skb = netdev_alloc_skb(dev, TLAN_MAX_FRAME_SIZE + 7 );
+ if ( !new_skb )
+ goto drop_and_reuse;
- new_skb = dev_alloc_skb( TLAN_MAX_FRAME_SIZE + 7 );
+ skb = TLan_GetSKB(head_list);
+ pci_unmap_single(priv->pciDev, frameDma,
+ TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
+ skb_put( skb, frameSize );
- if ( new_skb != NULL ) {
- skb = TLan_GetSKB(head_list);
- pci_unmap_single(priv->pciDev, head_list->buffer[0].address, TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
- skb_trim( skb, frameSize );
+ dev->stats.rx_bytes += frameSize;
- priv->stats.rx_bytes += frameSize;
+ skb->protocol = eth_type_trans( skb, dev );
+ netif_rx( skb );
- skb->protocol = eth_type_trans( skb, dev );
- netif_rx( skb );
+ skb_reserve( new_skb, NET_IP_ALIGN );
+ head_list->buffer[0].address = pci_map_single(priv->pciDev,
+ new_skb->data,
+ TLAN_MAX_FRAME_SIZE,
+ PCI_DMA_FROMDEVICE);
- skb_reserve( new_skb, 2 );
- t = (void *) skb_put( new_skb, TLAN_MAX_FRAME_SIZE );
- head_list->buffer[0].address = pci_map_single(priv->pciDev, new_skb->data, TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
- head_list->buffer[8].address = (u32) t;
- TLan_StoreSKB(head_list, new_skb);
- } else
- printk(KERN_WARNING "TLAN: Couldn't allocate memory for received data.\n" );
- }
+ TLan_StoreSKB(head_list, new_skb);
+ }
+drop_and_reuse:
head_list->forward = 0;
head_list->cStat = 0;
tail_list = priv->rxList + priv->rxTail;
@@ -1638,10 +1622,10 @@ static u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
printk(KERN_INFO "TLAN: Received interrupt for uncompleted RX frame.\n");
-
-
if ( eoc ) {
- TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE: Handling RX EOC (Head=%d Tail=%d)\n", priv->rxHead, priv->rxTail );
+ TLAN_DBG( TLAN_DEBUG_RX,
+ "RECEIVE: Handling RX EOC (Head=%d Tail=%d)\n",
+ priv->rxHead, priv->rxTail );
head_list = priv->rxList + priv->rxHead;
head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
outl(head_list_phys, dev->base_addr + TLAN_CH_PARM );
@@ -1650,7 +1634,8 @@ static u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
}
if ( priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED ) {
- TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
+ TLan_DioWrite8( dev->base_addr,
+ TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
if ( priv->timer.function == NULL ) {
priv->timer.function = &TLan_Timer;
priv->timer.data = (unsigned long) dev;
@@ -1728,7 +1713,9 @@ static u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int )
host_int = 0;
if ( priv->tlanRev < 0x30 ) {
- TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: Handling TX EOC (Head=%d Tail=%d) -- IRQ\n", priv->txHead, priv->txTail );
+ TLAN_DBG( TLAN_DEBUG_TX,
+ "TRANSMIT: Handling TX EOC (Head=%d Tail=%d) -- IRQ\n",
+ priv->txHead, priv->txTail );
head_list = priv->txList + priv->txHead;
head_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txHead;
if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
@@ -1796,15 +1783,18 @@ static u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
net_sts = TLan_DioRead8( dev->base_addr, TLAN_NET_STS );
if ( net_sts ) {
TLan_DioWrite8( dev->base_addr, TLAN_NET_STS, net_sts );
- TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Net_Sts = %x\n", dev->name, (unsigned) net_sts );
+ TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Net_Sts = %x\n",
+ dev->name, (unsigned) net_sts );
}
if ( ( net_sts & TLAN_NET_STS_MIRQ ) && ( priv->phyNum == 0 ) ) {
TLan_MiiReadReg( dev, phy, TLAN_TLPHY_STS, &tlphy_sts );
TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl );
- if ( ! ( tlphy_sts & TLAN_TS_POLOK ) && ! ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
+ if ( ! ( tlphy_sts & TLAN_TS_POLOK ) &&
+ ! ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
tlphy_ctl |= TLAN_TC_SWAPOL;
TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
- } else if ( ( tlphy_sts & TLAN_TS_POLOK ) && ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
+ } else if ( ( tlphy_sts & TLAN_TS_POLOK )
+ && ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
tlphy_ctl &= ~TLAN_TC_SWAPOL;
TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
}
@@ -1849,7 +1839,9 @@ static u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int )
u32 ack = 1;
if ( priv->tlanRev < 0x30 ) {
- TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE: Handling RX EOC (Head=%d Tail=%d) -- IRQ\n", priv->rxHead, priv->rxTail );
+ TLAN_DBG( TLAN_DEBUG_RX,
+ "RECEIVE: Handling RX EOC (Head=%d Tail=%d) -- IRQ\n",
+ priv->rxHead, priv->rxTail );
head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
outl( head_list_phys, dev->base_addr + TLAN_CH_PARM );
ack |= TLAN_HC_GO | TLAN_HC_RT;
@@ -1940,10 +1932,12 @@ static void TLan_Timer( unsigned long data )
if ( priv->timer.function == NULL ) {
elapsed = jiffies - priv->timerSetAt;
if ( elapsed >= TLAN_TIMER_ACT_DELAY ) {
- TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
+ TLan_DioWrite8( dev->base_addr,
+ TLAN_LED_REG, TLAN_LED_LINK );
} else {
priv->timer.function = &TLan_Timer;
- priv->timer.expires = priv->timerSetAt + TLAN_TIMER_ACT_DELAY;
+ priv->timer.expires = priv->timerSetAt
+ + TLAN_TIMER_ACT_DELAY;
spin_unlock_irqrestore(&priv->lock, flags);
add_timer( &priv->timer );
break;
@@ -1998,7 +1992,8 @@ static void TLan_ResetLists( struct net_device *dev )
list = priv->txList + i;
list->cStat = TLAN_CSTAT_UNUSED;
if ( bbuf ) {
- list->buffer[0].address = priv->txBufferDMA + ( i * TLAN_MAX_FRAME_SIZE );
+ list->buffer[0].address = priv->txBufferDMA
+ + ( i * TLAN_MAX_FRAME_SIZE );
} else {
list->buffer[0].address = 0;
}
@@ -2017,28 +2012,32 @@ static void TLan_ResetLists( struct net_device *dev )
list->frameSize = TLAN_MAX_FRAME_SIZE;
list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
if ( bbuf ) {
- list->buffer[0].address = priv->rxBufferDMA + ( i * TLAN_MAX_FRAME_SIZE );
+ list->buffer[0].address = priv->rxBufferDMA
+ + ( i * TLAN_MAX_FRAME_SIZE );
} else {
- skb = dev_alloc_skb( TLAN_MAX_FRAME_SIZE + 7 );
- if ( skb == NULL ) {
- printk( "TLAN: Couldn't allocate memory for received data.\n" );
- /* If this ever happened it would be a problem */
- } else {
- skb->dev = dev;
- skb_reserve( skb, 2 );
- t = (void *) skb_put( skb, TLAN_MAX_FRAME_SIZE );
+ skb = netdev_alloc_skb(dev, TLAN_MAX_FRAME_SIZE + 7 );
+ if ( !skb ) {
+ pr_err("TLAN: out of memory for received data.\n" );
+ break;
}
- list->buffer[0].address = pci_map_single(priv->pciDev, t, TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
- list->buffer[8].address = (u32) t;
+
+ skb_reserve( skb, NET_IP_ALIGN );
+ list->buffer[0].address = pci_map_single(priv->pciDev, t,
+ TLAN_MAX_FRAME_SIZE,
+ PCI_DMA_FROMDEVICE);
TLan_StoreSKB(list, skb);
}
list->buffer[1].count = 0;
list->buffer[1].address = 0;
- if ( i < TLAN_NUM_RX_LISTS - 1 )
- list->forward = list_phys + sizeof(TLanList);
- else
- list->forward = 0;
+ list->forward = list_phys + sizeof(TLanList);
+ }
+
+ /* in case ran out of memory early, clear bits */
+ while (i < TLAN_NUM_RX_LISTS) {
+ TLan_StoreSKB(priv->rxList + i, NULL);
+ ++i;
}
+ list->forward = 0;
} /* TLan_ResetLists */
@@ -2055,7 +2054,9 @@ static void TLan_FreeLists( struct net_device *dev )
list = priv->txList + i;
skb = TLan_GetSKB(list);
if ( skb ) {
- pci_unmap_single(priv->pciDev, list->buffer[0].address, skb->len, PCI_DMA_TODEVICE);
+ pci_unmap_single(priv->pciDev,
+ list->buffer[0].address, skb->len,
+ PCI_DMA_TODEVICE);
dev_kfree_skb_any( skb );
list->buffer[8].address = 0;
list->buffer[9].address = 0;
@@ -2066,7 +2067,10 @@ static void TLan_FreeLists( struct net_device *dev )
list = priv->rxList + i;
skb = TLan_GetSKB(list);
if ( skb ) {
- pci_unmap_single(priv->pciDev, list->buffer[0].address, TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
+ pci_unmap_single(priv->pciDev,
+ list->buffer[0].address,
+ TLAN_MAX_FRAME_SIZE,
+ PCI_DMA_FROMDEVICE);
dev_kfree_skb_any( skb );
list->buffer[8].address = 0;
list->buffer[9].address = 0;
@@ -2097,7 +2101,8 @@ static void TLan_PrintDio( u16 io_base )
u32 data0, data1;
int i;
- printk( "TLAN: Contents of internal registers for io base 0x%04hx.\n", io_base );
+ printk( "TLAN: Contents of internal registers for io base 0x%04hx.\n",
+ io_base );
printk( "TLAN: Off. +0 +4\n" );
for ( i = 0; i < 0x4C; i+= 8 ) {
data0 = TLan_DioRead32( io_base, i );
@@ -2131,13 +2136,14 @@ static void TLan_PrintList( TLanList *list, char *type, int num)
{
int i;
- printk( "TLAN: %s List %d at 0x%08x\n", type, num, (u32) list );
+ printk( "TLAN: %s List %d at %p\n", type, num, list );
printk( "TLAN: Forward = 0x%08x\n", list->forward );
printk( "TLAN: CSTAT = 0x%04hx\n", list->cStat );
printk( "TLAN: Frame Size = 0x%04hx\n", list->frameSize );
/* for ( i = 0; i < 10; i++ ) { */
for ( i = 0; i < 2; i++ ) {
- printk( "TLAN: Buffer[%d].count, addr = 0x%08x, 0x%08x\n", i, list->buffer[i].count, list->buffer[i].address );
+ printk( "TLAN: Buffer[%d].count, addr = 0x%08x, 0x%08x\n",
+ i, list->buffer[i].count, list->buffer[i].address );
}
} /* TLan_PrintList */
@@ -2165,7 +2171,6 @@ static void TLan_PrintList( TLanList *list, char *type, int num)
static void TLan_ReadAndClearStats( struct net_device *dev, int record )
{
- TLanPrivateInfo *priv = netdev_priv(dev);
u32 tx_good, tx_under;
u32 rx_good, rx_over;
u32 def_tx, crc, code;
@@ -2202,18 +2207,18 @@ static void TLan_ReadAndClearStats( struct net_device *dev, int record )
loss = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
if ( record ) {
- priv->stats.rx_packets += rx_good;
- priv->stats.rx_errors += rx_over + crc + code;
- priv->stats.tx_packets += tx_good;
- priv->stats.tx_errors += tx_under + loss;
- priv->stats.collisions += multi_col + single_col + excess_col + late_col;
+ dev->stats.rx_packets += rx_good;
+ dev->stats.rx_errors += rx_over + crc + code;
+ dev->stats.tx_packets += tx_good;
+ dev->stats.tx_errors += tx_under + loss;
+ dev->stats.collisions += multi_col + single_col + excess_col + late_col;
- priv->stats.rx_over_errors += rx_over;
- priv->stats.rx_crc_errors += crc;
- priv->stats.rx_frame_errors += code;
+ dev->stats.rx_over_errors += rx_over;
+ dev->stats.rx_crc_errors += crc;
+ dev->stats.rx_frame_errors += code;
- priv->stats.tx_aborted_errors += tx_under;
- priv->stats.tx_carrier_errors += loss;
+ dev->stats.tx_aborted_errors += tx_under;
+ dev->stats.tx_carrier_errors += loss;
}
} /* TLan_ReadAndClearStats */
@@ -2354,14 +2359,16 @@ TLan_FinishReset( struct net_device *dev )
TLan_MiiReadReg( dev, phy, MII_GEN_ID_HI, &tlphy_id1 );
TLan_MiiReadReg( dev, phy, MII_GEN_ID_LO, &tlphy_id2 );
- if ( ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) || ( priv->aui ) ) {
+ if ( ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) ||
+ ( priv->aui ) ) {
status = MII_GS_LINK;
printk( "TLAN: %s: Link forced.\n", dev->name );
} else {
TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
udelay( 1000 );
TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
- if ( (status & MII_GS_LINK) && /* We only support link info on Nat.Sem. PHY's */
+ if ( (status & MII_GS_LINK) &&
+ /* We only support link info on Nat.Sem. PHY's */
(tlphy_id1 == NAT_SEM_ID1) &&
(tlphy_id2 == NAT_SEM_ID2) ) {
TLan_MiiReadReg( dev, phy, MII_AN_LPA, &partner );
@@ -2370,12 +2377,12 @@ TLan_FinishReset( struct net_device *dev )
printk( "TLAN: %s: Link active with ", dev->name );
if (!(tlphy_par & TLAN_PHY_AN_EN_STAT)) {
printk( "forced 10%sMbps %s-Duplex\n",
- tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
- tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
+ tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
+ tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
} else {
printk( "AutoNegotiation enabled, at 10%sMbps %s-Duplex\n",
- tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
- tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
+ tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
+ tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
printk("TLAN: Partner capability: ");
for (i = 5; i <= 10; i++)
if (partner & (1<<i))
@@ -2416,7 +2423,8 @@ TLan_FinishReset( struct net_device *dev )
outl( TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD );
netif_carrier_on(dev);
} else {
- printk( "TLAN: %s: Link inactive, will retry in 10 secs...\n", dev->name );
+ printk( "TLAN: %s: Link inactive, will retry in 10 secs...\n",
+ dev->name );
TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_FINISH_RESET );
return;
}
@@ -2456,10 +2464,12 @@ static void TLan_SetMac( struct net_device *dev, int areg, char *mac )
if ( mac != NULL ) {
for ( i = 0; i < 6; i++ )
- TLan_DioWrite8( dev->base_addr, TLAN_AREG_0 + areg + i, mac[i] );
+ TLan_DioWrite8( dev->base_addr,
+ TLAN_AREG_0 + areg + i, mac[i] );
} else {
for ( i = 0; i < 6; i++ )
- TLan_DioWrite8( dev->base_addr, TLAN_AREG_0 + areg + i, 0 );
+ TLan_DioWrite8( dev->base_addr,
+ TLAN_AREG_0 + areg + i, 0 );
}
} /* TLan_SetMac */
@@ -2565,9 +2575,13 @@ static void TLan_PhyDetect( struct net_device *dev )
TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &control );
TLan_MiiReadReg( dev, phy, MII_GEN_ID_HI, &hi );
TLan_MiiReadReg( dev, phy, MII_GEN_ID_LO, &lo );
- if ( ( control != 0xFFFF ) || ( hi != 0xFFFF ) || ( lo != 0xFFFF ) ) {
- TLAN_DBG( TLAN_DEBUG_GNRL, "PHY found at %02x %04x %04x %04x\n", phy, control, hi, lo );
- if ( ( priv->phy[1] == TLAN_PHY_NONE ) && ( phy != TLAN_PHY_MAX_ADDR ) ) {
+ if ( ( control != 0xFFFF ) ||
+ ( hi != 0xFFFF ) || ( lo != 0xFFFF ) ) {
+ TLAN_DBG( TLAN_DEBUG_GNRL,
+ "PHY found at %02x %04x %04x %04x\n",
+ phy, control, hi, lo );
+ if ( ( priv->phy[1] == TLAN_PHY_NONE ) &&
+ ( phy != TLAN_PHY_MAX_ADDR ) ) {
priv->phy[1] = phy;
}
}
@@ -2595,7 +2609,9 @@ static void TLan_PhyPowerDown( struct net_device *dev )
value = MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_ISOLATE;
TLan_MiiSync( dev->base_addr );
TLan_MiiWriteReg( dev, priv->phy[priv->phyNum], MII_GEN_CTL, value );
- if ( ( priv->phyNum == 0 ) && ( priv->phy[1] != TLAN_PHY_NONE ) && ( ! ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) ) ) {
+ if ( ( priv->phyNum == 0 ) &&
+ ( priv->phy[1] != TLAN_PHY_NONE ) &&
+ ( ! ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) ) ) {
TLan_MiiSync( dev->base_addr );
TLan_MiiWriteReg( dev, priv->phy[1], MII_GEN_CTL, value );
}
@@ -2768,10 +2784,10 @@ static void TLan_PhyFinishAutoNeg( struct net_device *dev )
* more time. Perhaps we should fail after a while.
*/
if (!priv->neg_be_verbose++) {
- printk(KERN_INFO "TLAN: Giving autonegotiation more time.\n");
- printk(KERN_INFO "TLAN: Please check that your adapter has\n");
- printk(KERN_INFO "TLAN: been properly connected to a HUB or Switch.\n");
- printk(KERN_INFO "TLAN: Trying to establish link in the background...\n");
+ pr_info("TLAN: Giving autonegotiation more time.\n");
+ pr_info("TLAN: Please check that your adapter has\n");
+ pr_info("TLAN: been properly connected to a HUB or Switch.\n");
+ pr_info("TLAN: Trying to establish link in the background...\n");
}
TLan_SetTimer( dev, (8*HZ), TLAN_TIMER_PHY_FINISH_AN );
return;
@@ -2787,7 +2803,9 @@ static void TLan_PhyFinishAutoNeg( struct net_device *dev )
priv->tlanFullDuplex = TRUE;
}
- if ( ( ! ( mode & 0x0180 ) ) && ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) && ( priv->phyNum != 0 ) ) {
+ if ( ( ! ( mode & 0x0180 ) ) &&
+ ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) &&
+ ( priv->phyNum != 0 ) ) {
priv->phyNum = 0;
data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, data );
@@ -2796,12 +2814,14 @@ static void TLan_PhyFinishAutoNeg( struct net_device *dev )
}
if ( priv->phyNum == 0 ) {
- if ( ( priv->duplex == TLAN_DUPLEX_FULL ) || ( an_adv & an_lpa & 0x0040 ) ) {
- TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, MII_GC_AUTOENB | MII_GC_DUPLEX );
- printk( "TLAN: Starting internal PHY with FULL-DUPLEX\n" );
+ if ( ( priv->duplex == TLAN_DUPLEX_FULL ) ||
+ ( an_adv & an_lpa & 0x0040 ) ) {
+ TLan_MiiWriteReg( dev, phy, MII_GEN_CTL,
+ MII_GC_AUTOENB | MII_GC_DUPLEX );
+ pr_info("TLAN: Starting internal PHY with FULL-DUPLEX\n" );
} else {
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, MII_GC_AUTOENB );
- printk( "TLAN: Starting internal PHY with HALF-DUPLEX\n" );
+ pr_info( "TLAN: Starting internal PHY with HALF-DUPLEX\n" );
}
}
@@ -3209,7 +3229,8 @@ static int TLan_EeSendByte( u16 io_base, u8 data, int stop )
TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
if ( ( ! err ) && stop ) {
- TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); /* STOP, raise data while clock is high */
+ /* STOP, raise data while clock is high */
+ TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
}
@@ -3272,7 +3293,8 @@ static void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
TLan_SetBit( TLAN_NET_SIO_EDATA, sio ); /* No ack = 1 (?) */
TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
- TLan_ClearBit( TLAN_NET_SIO_EDATA, sio ); /* STOP, raise data while clock is high */
+ /* STOP, raise data while clock is high */
+ TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
}
diff --git a/drivers/net/tlan.h b/drivers/net/tlan.h
index 41ce0b6..4b82f28 100644
--- a/drivers/net/tlan.h
+++ b/drivers/net/tlan.h
@@ -13,8 +13,6 @@
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
- ** This file is best viewed/edited with tabstop=4, colums>=132
- *
*
* Dec 10, 1999 Torben Mathiasen <torben.mathiasen@xxxxxxxxxx>
* New Maintainer
@@ -45,7 +43,9 @@
#define TLAN_IGNORE 0
#define TLAN_RECORD 1
-#define TLAN_DBG(lvl, format, args...) if (debug&lvl) printk(KERN_DEBUG "TLAN: " format, ##args );
+#define TLAN_DBG(lvl, format, args...) \
+ do { if (debug&lvl) printk(KERN_DEBUG "TLAN: " format, ##args ); } while(0)
+
#define TLAN_DEBUG_GNRL 0x0001
#define TLAN_DEBUG_TX 0x0002
#define TLAN_DEBUG_RX 0x0004
@@ -194,7 +194,6 @@ typedef struct tlan_private_tag {
u32 timerSetAt;
u32 timerType;
struct timer_list timer;
- struct net_device_stats stats;
struct board *adapter;
u32 adapterRev;
u32 aui;
@@ -205,7 +204,6 @@ typedef struct tlan_private_tag {
u32 speed;
u8 tlanRev;
u8 tlanFullDuplex;
- char devName[8];
spinlock_t lock;
u8 link;
u8 is_eisa;
@@ -517,12 +515,18 @@ static inline void TLan_DioWrite32(u16 base_addr, u16 internal_addr, u32 data)
* xor( a, xor( b, xor( c, xor( d, xor( e, xor( f, xor( g, h ) ) ) ) ) ) )
* #define DA( a, bit ) ( ( (u8) a[bit/8] ) & ( (u8) ( 1 << bit%8 ) ) )
*
- * hash = XOR8( DA(a,0), DA(a, 6), DA(a,12), DA(a,18), DA(a,24), DA(a,30), DA(a,36), DA(a,42) );
- * hash |= XOR8( DA(a,1), DA(a, 7), DA(a,13), DA(a,19), DA(a,25), DA(a,31), DA(a,37), DA(a,43) ) << 1;
- * hash |= XOR8( DA(a,2), DA(a, 8), DA(a,14), DA(a,20), DA(a,26), DA(a,32), DA(a,38), DA(a,44) ) << 2;
- * hash |= XOR8( DA(a,3), DA(a, 9), DA(a,15), DA(a,21), DA(a,27), DA(a,33), DA(a,39), DA(a,45) ) << 3;
- * hash |= XOR8( DA(a,4), DA(a,10), DA(a,16), DA(a,22), DA(a,28), DA(a,34), DA(a,40), DA(a,46) ) << 4;
- * hash |= XOR8( DA(a,5), DA(a,11), DA(a,17), DA(a,23), DA(a,29), DA(a,35), DA(a,41), DA(a,47) ) << 5;
+ * hash = XOR8( DA(a,0), DA(a, 6), DA(a,12), DA(a,18), DA(a,24),
+ * DA(a,30), DA(a,36), DA(a,42) );
+ * hash |= XOR8( DA(a,1), DA(a, 7), DA(a,13), DA(a,19), DA(a,25),
+ * DA(a,31), DA(a,37), DA(a,43) ) << 1;
+ * hash |= XOR8( DA(a,2), DA(a, 8), DA(a,14), DA(a,20), DA(a,26),
+ * DA(a,32), DA(a,38), DA(a,44) ) << 2;
+ * hash |= XOR8( DA(a,3), DA(a, 9), DA(a,15), DA(a,21), DA(a,27),
+ * DA(a,33), DA(a,39), DA(a,45) ) << 3;
+ * hash |= XOR8( DA(a,4), DA(a,10), DA(a,16), DA(a,22), DA(a,28),
+ * DA(a,34), DA(a,40), DA(a,46) ) << 4;
+ * hash |= XOR8( DA(a,5), DA(a,11), DA(a,17), DA(a,23), DA(a,29),
+ * DA(a,35), DA(a,41), DA(a,47) ) << 5;
*
*/
static inline u32 TLan_HashFunc( const u8 *a )
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index c028fac..febfaee 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -803,7 +803,8 @@ static int tsi108_refill_rx(struct net_device *dev, int budget)
int rx = data->rxhead;
struct sk_buff *skb;
- data->rxskbs[rx] = skb = dev_alloc_skb(TSI108_RXBUF_SIZE + 2);
+ data->rxskbs[rx] = skb = netdev_alloc_skb(dev,
+ TSI108_RXBUF_SIZE + 2);
if (!skb)
break;
@@ -1352,8 +1353,9 @@ static int tsi108_open(struct net_device *dev)
data->rxhead = 0;
for (i = 0; i < TSI108_RXRING_LEN; i++) {
- struct sk_buff *skb = dev_alloc_skb(TSI108_RXBUF_SIZE + NET_IP_ALIGN);
+ struct sk_buff *skb;
+ skb = netdev_alloc_skb(dev, TSI108_RXBUF_SIZE + NET_IP_ALIGN);
if (!skb) {
/* Bah. No memory for now, but maybe we'll get
* some more later.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/