Re: acpi problem
From: Rafael J. Wysocki
Date: Thu May 29 2008 - 15:55:55 EST
[Added a couple of CCs]
On Thursday, 29 of May 2008, De Martino Pasquale wrote:
> summary of the problem:
> with kernel 2.6.25 my acpi does not work whereas with version <= 2.6.24 all works fine.
>
> Full description:
> when i run acpi -a this is my output:
> No support for device type: battery
> No support for device type: ac_adapter
>
> "lsmod | grep acpi" says that the acpi module is not loaded so i've tried
> "modprobe acpi" but the output is:
> FATAL: Error inserting acpi_cpufreq
> (/lib/modules/2.6.25-2-amd64/kernel/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.ko):
> Device or resource busy
>
> I've also tried to pass acpi=on option when kernel boots
>
> ------------------------------------------------------------------------
>
> ver_linux output:
> Linux guevara 2.6.25-2-amd64 #1 SMP Tue May 27 12:45:24 UTC 2008 x86_64
> GNU/Linux
>
> Gnu C 4.2.4
> Gnu make 3.81
> binutils 2.18.0.20080103
> util-linux 2.13.1.1
> mount 2.13.1.1
> module-init-tools 3.4
> e2fsprogs 1.40.8
> Linux C Library 2.7
> Dynamic linker (ldd) 2.7
> Procps 3.2.7
> Net-tools 1.60
> Console-tools 0.2.3
> Sh-utils 6.10
> udev 114
> wireless-tools 29
> Modules Loaded ipv6 rfcomm l2cap bluetooth ppdev parport_pc lp
> parport container sbs sbshc powernow_k8 cpufreq_stats cpufreq_conservative
> cpufreq_ondemand cpufreq_powersave cpufreq_userspace dm_snapshot dm_mirror
> dm_mod ndiswrapper firewire_sbp2 loop freq_table joydev psmouse k8temp
> snd_hda_intel serio_raw pcspkr snd_pcm_oss snd_mixer_oss snd_pcm snd_timer
> ricoh_mmc snd sdhci mmc_core soundcore snd_page_alloc i2c_nforce2 i2c_core
> video output wmi battery ac button evdev ext3 jbd mbcache sd_mod ide_cd_mod
> cdrom sata_nv ata_generic libata scsi_mod dock firewire_ohci firewire_core
> crc_itu_t ide_pci_generic forcedeth amd74xx ide_core ehci_hcd ohci_hcd
> thermal processor fan
>
> -------------------------------------------------------------------------
>
> /proc/cpuinfo:
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 72
> model name : AMD Turion(tm) 64 X2 Mobile Technology TL-50
> stepping : 2
> cpu MHz : 800.000
> cache size : 256 KB
> physical id : 0
> siblings : 2
> core id : 0
> cpu cores : 2
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
> 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
> bogomips : 1608.88
> TLB size : 1024 4K pages
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management: ts fid vid ttp tm stc
>
> processor : 1
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 72
> model name : AMD Turion(tm) 64 X2 Mobile Technology TL-50
> stepping : 2
> cpu MHz : 800.000
> cache size : 256 KB
> physical id : 0
> siblings : 2
> core id : 1
> cpu cores : 2
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
> 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
> bogomips : 1608.88
> TLB size : 1024 4K pages
> clflush size : 64
> cache_alignment : 64
> address sizes : 40 bits physical, 48 bits virtual
> power management: ts fid vid ttp tm stc
>
> ----------------------------------------------------------------------
>
> /proc/modules:
> ipv6 294120 10 - Live 0xffffffff88349000
> rfcomm 46112 0 - Live 0xffffffff8833c000
> l2cap 29696 5 rfcomm, Live 0xffffffff88333000
> bluetooth 65444 4 rfcomm,l2cap, Live 0xffffffff88322000
> ppdev 13832 0 - Live 0xffffffff8831d000
> parport_pc 34344 0 - Live 0xffffffff88313000
> lp 17540 0 - Live 0xffffffff8830d000
> parport 44848 3 ppdev,parport_pc,lp, Live 0xffffffff88301000
> container 9600 0 - Live 0xffffffff882fd000
> sbs 14336 0 - Live 0xffffffff882f8000
> sbshc 11904 1 sbs, Live 0xffffffff882f4000
> powernow_k8 19076 1 - Live 0xffffffff882ee000
> cpufreq_stats 10528 0 - Live 0xffffffff882ea000
> cpufreq_conservative 13320 0 - Live 0xffffffff882e5000
> cpufreq_ondemand 13712 1 - Live 0xffffffff882e0000
> cpufreq_powersave 6272 0 - Live 0xffffffff882dd000
> cpufreq_userspace 9092 0 - Live 0xffffffff882d9000
> dm_snapshot 22472 0 - Live 0xffffffff882d2000
> dm_mirror 31748 0 - Live 0xffffffff882c9000
> dm_mod 68536 2 dm_snapshot,dm_mirror, Live 0xffffffff882b7000
> ndiswrapper 226944 0 - Live 0xffffffff8827e000
> firewire_sbp2 22808 0 - Live 0xffffffff88277000
> loop 23044 0 - Live 0xffffffff88270000
> freq_table 9728 3 powernow_k8,cpufreq_stats,cpufreq_ondemand, Live
> 0xffffffff8826c000
> joydev 17664 0 - Live 0xffffffff88266000
> psmouse 45724 0 - Live 0xffffffff88259000
> k8temp 10624 0 - Live 0xffffffff88255000
> snd_hda_intel 414296 1 - Live 0xffffffff881ee000
> serio_raw 11652 0 - Live 0xffffffff881ea000
> pcspkr 7808 0 - Live 0xffffffff881e7000
> snd_pcm_oss 46752 0 - Live 0xffffffff881da000
> snd_mixer_oss 21376 1 snd_pcm_oss, Live 0xffffffff881d3000
> snd_pcm 88072 2 snd_hda_intel,snd_pcm_oss, Live 0xffffffff881bc000
> snd_timer 29328 1 snd_pcm, Live 0xffffffff881b3000
> ricoh_mmc 8960 0 - Live 0xffffffff881af000
> snd 66888 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer, Live
> 0xffffffff8819d000
> sdhci 22796 0 - Live 0xffffffff88196000
> mmc_core 56416 1 sdhci, Live 0xffffffff88187000
> soundcore 13088 1 snd, Live 0xffffffff88182000
> snd_page_alloc 15120 2 snd_hda_intel,snd_pcm, Live 0xffffffff8817d000
> i2c_nforce2 11392 0 - Live 0xffffffff88179000
> i2c_core 30752 1 i2c_nforce2, Live 0xffffffff88170000
> video 27412 0 - Live 0xffffffff88168000
> output 8704 1 video, Live 0xffffffff88164000
> wmi 13120 0 - Live 0xffffffff8815f000
> battery 14208 0 - Live 0xffffffff8815a000
> ac 9344 0 - Live 0xffffffff88156000
> button 13856 0 - Live 0xffffffff88151000
> evdev 17408 8 - Live 0xffffffff8814b000
> ext3 139280 2 - Live 0xffffffff88127000
> jbd 55336 1 ext3, Live 0xffffffff88118000
> mbcache 13956 1 ext3, Live 0xffffffff88113000
> sd_mod 33728 4 - Live 0xffffffff88109000
> ide_cd_mod 41504 0 - Live 0xffffffff880fd000
> cdrom 39464 1 ide_cd_mod, Live 0xffffffff880f2000
> sata_nv 32520 3 - Live 0xffffffff880e9000
> ata_generic 13572 0 - Live 0xffffffff880e4000
> libata 165808 2 sata_nv,ata_generic, Live 0xffffffff880ba000
> scsi_mod 170360 3 firewire_sbp2,sd_mod,libata, Live 0xffffffff8808f000
> dock 16288 1 libata, Live 0xffffffff8808a000
> firewire_ohci 27908 0 - Live 0xffffffff88082000
> firewire_core 45920 2 firewire_sbp2,firewire_ohci, Live 0xffffffff88075000
> crc_itu_t 6656 1 firewire_core, Live 0xffffffff88072000
> ide_pci_generic 9476 0 [permanent], Live 0xffffffff8806c000
> forcedeth 55692 0 - Live 0xffffffff8805b000
> amd74xx 13576 0 [permanent], Live 0xffffffff88054000
> ide_core 138160 3 ide_cd_mod,ide_pci_generic,amd74xx, Live 0xffffffff88031000
> ehci_hcd 40076 0 - Live 0xffffffff88024000
> ohci_hcd 28292 0 - Live 0xffffffff8801a000
> thermal 26656 0 - Live 0xffffffff88012000
> processor 49388 4 powernow_k8,thermal, Live 0xffffffff88004000
> fan 10760 0 - Live 0xffffffff88000000
>
> -----------------------------------------------------------------------
>
> /proc/ioports:
> 0000-001f : dma1
> 0020-0021 : pic1
> 0040-0043 : timer0
> 0050-0053 : timer1
> 0060-006f : keyboard
> 0070-0077 : rtc
> 0080-008f : dma page reg
> 00a0-00a1 : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : 0000:00:0d.0
> 01f0-01f7 : 0000:00:0d.0
> 01f0-01f7 : ide0
> 0360-0361 : pnp 00:05
> 0376-0376 : 0000:00:0d.0
> 0380-0383 : pnp 00:05
> 03c0-03df : vesafb
> 03f6-03f6 : 0000:00:0d.0
> 03f6-03f6 : ide0
> 04d0-04d1 : pnp 00:05
> 0cf8-0cff : PCI conf1
> 1000-107f : pnp 00:04
> 1000-1003 : ACPI PM1a_EVT_BLK
> 1004-1005 : ACPI PM1a_CNT_BLK
> 1008-100b : ACPI PM_TMR
> 1010-1015 : ACPI CPU throttle
> 1020-1027 : ACPI GPE0_BLK
> 1080-10ff : pnp 00:04
> 1400-147f : pnp 00:04
> 1480-14ff : pnp 00:04
> 1484-1484 : ACPI PM2_CNT_BLK
> 1800-187f : pnp 00:04
> 1880-18ff : pnp 00:04
> 1d00-1d7f : 0000:00:0a.0
> 2000-203f : pnp 00:04
> 3000-303f : 0000:00:0a.1
> 3000-303f : nForce2_smbus
> 3040-307f : 0000:00:0a.1
> 3040-307f : nForce2_smbus
> 3080-308f : 0000:00:0d.0
> 3080-3087 : ide0
> 3090-309f : 0000:00:0e.0
> 3090-309f : sata_nv
> 30b0-30b3 : 0000:00:0e.0
> 30b0-30b3 : sata_nv
> 30b4-30b7 : 0000:00:0e.0
> 30b4-30b7 : sata_nv
> 30b8-30bf : 0000:00:0e.0
> 30b8-30bf : sata_nv
> 30c0-30c7 : 0000:00:0e.0
> 30c0-30c7 : sata_nv
> 30e0-30e7 : 0000:00:14.0
> 30e0-30e7 : forcedeth
> 4000-4fff : PCI Bus #01
>
> -----------------------------------------------------------------------
>
> /proc/iomem:
> 00000000-0009dbff : System RAM
> 0009dc00-0009ffff : reserved
> 000d2000-000fffff : reserved
> 00100000-3fefffff : System RAM
> 00200000-00421ffe : Kernel code
> 00421fff-0051f4f7 : Kernel data
> 005bf000-0063d2f7 : Kernel bss
> 3ff00000-3ff14fff : ACPI Tables
> 3ff15000-3ff7ffff : ACPI Non-volatile Storage
> 3ff80000-3fffffff : reserved
> c0000000-c0003fff : 0000:00:10.1
> c0000000-c0003fff : ICH HD audio
> c0004000-c0004fff : 0000:00:0b.0
> c0004000-c0004fff : ohci_hcd
> c0005000-c00050ff : 0000:00:0b.1
> c0005000-c00050ff : ehci_hcd
> c0006000-c0006fff : 0000:00:0e.0
> c0006000-c0006fff : sata_nv
> c0008000-c0008fff : 0000:00:14.0
> c0008000-c0008fff : forcedeth
> c0040000-c007ffff : 0000:00:0a.3
> c2000000-c3ffffff : PCI Bus #01
> c4000000-c5ffffff : PCI Bus #03
> c4000000-c4003fff : 0000:03:00.0
> c4000000-c4003fff : ndiswrapper
> c6000000-c7ffffff : PCI Bus #05
> c6000000-c6ffffff : 0000:05:00.0
> c7000000-c7ffffff : 0000:05:00.0
> c8000000-c80fffff : PCI Bus #07
> c8000000-c80007ff : 0000:07:05.0
> c8000000-c80007ff : firewire_ohci
> c8000800-c80008ff : 0000:07:05.1
> c8000800-c80008ff : sdhc0:slot0
> c8000c00-c8000cff : 0000:07:05.2
> c8001000-c80010ff : 0000:07:05.3
> c8001400-c80014ff : 0000:07:05.4
> c8200000-c83fffff : PCI Bus #01
> d0000000-dfffffff : PCI Bus #05
> d0000000-dfffffff : 0000:05:00.0
> d0000000-d3ffffff : vesafb
> e0000000-efffffff : reserved
> e0000000-e06fffff : PCI MMCONFIG 0
> fec00000-fec0ffff : reserved
> fec00000-fec00fff : IOAPIC 0
> fed00000-fed00fff : pnp 00:01
> fed00000-fed003ff : HPET 0
> fee00000-fee00fff : Local APIC
> fff80000-ffffffff : reserved
>
> -----------------------------------------------------------------------
>
> lspci -vvv:
> 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [44] HyperTransport: Slave or Primary Interface
> Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
> Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Link Control 1: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
> Revision ID: 1.03
> Link Frequency 0: 400MHz
> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
> Link Frequency 1: 400MHz
> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 1: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
> Prefetchable memory behind bridge Upper: 00-00
> Bus Number: 00
> Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
>
> 00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [44] #00 [00fe]
> Capabilities: [fc] #00 [0000]
>
> 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 00004000-00004fff
> Memory behind bridge: c2000000-c3ffffff
> Prefetchable memory behind bridge: 00000000c8200000-00000000c83fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: nVidia Corporation Device 0000
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
> Address: 00000000fee0300c Data: 4149
> Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
> ClockPM- Suprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn+ PwrFlt+ MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
> Control: AttnInd Off, PwrInd On, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
> Changed: MRL- PresDet- LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [100] Virtual Channel <?>
> Kernel driver in use: pcieport-driver
> Kernel modules: shpchp
>
> 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: c4000000-c5ffffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: nVidia Corporation Device 0000
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
> Address: 00000000fee0300c Data: 4151
> Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
> ClockPM- Suprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn+ PwrFlt+ MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
> Control: AttnInd Off, PwrInd On, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet- LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [100] Virtual Channel <?>
> Kernel driver in use: pcieport-driver
> Kernel modules: shpchp
>
> 00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: c6000000-c7ffffff
> Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: nVidia Corporation Device 0000
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
> Address: 00000000fee0300c Data: 4159
> Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
> Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
> ClockPM- Suprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
> Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Off, PwrInd On, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet+ LinkState+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [100] Virtual Channel <?>
> Kernel driver in use: pcieport-driver
> Kernel modules: shpchp
>
> 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [44] HyperTransport: Slave or Primary Interface
> Command: BaseUnitID=9 UnitCnt=15 MastHost- DefDir- DUL-
> Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
> Revision ID: 1.03
> Link Frequency 0: 800MHz
> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
> Link Frequency 1: 200MHz
> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
> Prefetchable memory behind bridge Upper: 00-00
> Bus Number: 00
> Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
>
> 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Region 0: I/O ports at 1d00 [size=128]
>
> 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 10
> Region 4: I/O ports at 3040 [size=64]
> Region 5: I/O ports at 3000 [size=64]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: nForce2_smbus
> Kernel modules: i2c-nforce2
>
> 00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin B routed to IRQ 10
> Region 0: Memory at c0040000 (32-bit, non-prefetchable) [size=256K]
>
> 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 10)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at c0004000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 20)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin B routed to IRQ 22
> Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [44] Debug port: BAR=1 offset=0098
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
>
> 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev f1) (prog-if 8a [Master SecP PriP])
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
> Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
> Region 4: I/O ports at 3080 [size=16]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: AMD_IDE
> Kernel modules: amd74xx, ide-pci-generic, ata_generic
>
> 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev f1) (prog-if 85 [Master SecO PriO])
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 23
> Region 0: I/O ports at 30c0 [size=8]
> Region 1: I/O ports at 30b4 [size=4]
> Region 2: I/O ports at 30b8 [size=8]
> Region 3: I/O ports at 30b0 [size=4]
> Region 4: I/O ports at 3090 [size=16]
> Region 5: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: sata_nv
> Kernel modules: ide-pci-generic, sata_nv, ata_generic
>
> 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) (prog-if 01)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: c8000000-c80fffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
> Capabilities: [b8] Subsystem: Gammagraphx, Inc. Device 0000
> Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
> Mapping Address Base: 00000000fee00000
>
> 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (500ns min, 1250ns max)
> Interrupt: pin B routed to IRQ 21
> Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
> Address: 0000000000000000 Data: 0000
> Masking: 00000000 Pending: 00000000
> Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
> Kernel driver in use: HDA Intel
> Kernel modules: snd-hda-intel
>
> 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0 (250ns min, 5000ns max)
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at 30e0 [size=8]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
> Kernel driver in use: forcedeth
> Kernel modules: forcedeth
>
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: [80] HyperTransport: Host or Secondary Interface
> !!! Possibly incomplete decoding
> Command: WarmRst+ DblEnd-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=8
> Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
> Revision ID: 1.02
>
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: [f0] Secure device <?>
> Kernel driver in use: k8temp
> Kernel modules: k8temp
>
> 03:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01)
> Subsystem: Hewlett-Packard Company Device 1361
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 19
> Region 0: Memory at c4000000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
> Address: 00000000 Data: 0000
> Capabilities: [d0] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Advanced Error Reporting <?>
> Capabilities: [13c] Virtual Channel <?>
> Kernel driver in use: ndiswrapper
> Kernel modules: ssb
>
> 05:00.0 VGA compatible controller: nVidia Corporation GeForce Go 7200 (rev a1)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at c7000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> Region 3: Memory at c6000000 (64-bit, non-prefetchable) [size=16M]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [78] Express (v1) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <4us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <4us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Virtual Channel <?>
> Capabilities: [128] Power Budgeting <?>
> Kernel modules: nvidiafb
>
> 07:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (prog-if 10)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (500ns min, 1000ns max)
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=2K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME+
> Kernel driver in use: firewire_ohci
> Kernel modules: firewire-ohci
>
> 07:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Interrupt: pin B routed to IRQ 7
> Region 0: Memory at c8000800 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> Kernel driver in use: sdhci
> Kernel modules: sdhci
>
> 07:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 0a)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin B routed to IRQ 11
> Region 0: Memory at c8000c00 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> Kernel driver in use: ricoh-mmc
> Kernel modules: ricoh_mmc
>
> 07:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 05)
> Subsystem: Hewlett-Packard Company Device 30b7
> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin B routed to IRQ 11
> Region 0: Memory at c8001000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 07:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) (prog-if ff)
> !!! Unknown header type 7f
>
> --------------------------------------------------------------------------
>
> /proc/scsi/scsi:
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: TOSHIBA MK1234GS Rev: AH00
> Type: Direct-Access ANSI SCSI revision: 05
>
>
> PS: Sorry for my english!
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
--
"Premature optimization is the root of all evil." - Donald Knuth
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/