Re: [RFC PATCH v1 1/3] General framework for APERF/MPERF access andaccounting

[Balbir Singh]

Vaidyanathan Srinivasan wrote:
> General framework for low level APERF/MPERF access.
> * Avoid resetting APERF/MPERF in acpi-cpufreq.c
> * Implement functions that will calculate the scaled stats
> * acpi_get_pm_msrs_delta() will give delta values after reading the current values
> * Change get_measured_perf() to use acpi_get_pm_msrs_delta()
> * scaled_stats_init() detect availability of APERF/MPERF using cpuid
> * reset_for_scaled_stats() called when a process occupies the CPU
> * account_scaled_stats() is called when the process leaves the CPU
> 
> Signed-off-by: Amit K. Arora <aarora@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Vaidyanathan Srinivasan <svaidy@xxxxxxxxxxxxxxxxxx>
> ---
> 
>  arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c |   21 +++
>  arch/x86/kernel/time_32.c                  |  171 ++++++++++++++++++++++++++++
>  2 files changed, 188 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
> index b0c8208..761beec 100644
> --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
> +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
> @@ -59,6 +59,13 @@ enum {
>  #define INTEL_MSR_RANGE		(0xffff)
>  #define CPUID_6_ECX_APERFMPERF_CAPABILITY	(0x1)
> 
> +/* Buffer to store old snapshot values */
> +DEFINE_PER_CPU(u64, cpufreq_old_aperf);
> +DEFINE_PER_CPU(u64, cpufreq_old_mperf);
> +
> +extern void acpi_get_pm_msrs_delta(u64 *aperf_delta, u64 *mperf_delta,
> +				   u64 *aperf_old, u64 *mperf_old, int reset);
> +
>  struct acpi_cpufreq_data {
>  	struct acpi_processor_performance *acpi_data;
>  	struct cpufreq_frequency_table *freq_table;
> @@ -265,6 +272,7 @@ static unsigned int get_measured_perf(unsigned int cpu)
>  		} split;
>  		u64 whole;
>  	} aperf_cur, mperf_cur;
> +	u64 *aperf_old, *mperf_old;
> 
>  	cpumask_t saved_mask;
>  	unsigned int perf_percent;
> @@ -278,11 +286,16 @@ static unsigned int get_measured_perf(unsigned int cpu)
>  		return 0;
>  	}
> 
> -	rdmsr(MSR_IA32_APERF, aperf_cur.split.lo, aperf_cur.split.hi);
> -	rdmsr(MSR_IA32_MPERF, mperf_cur.split.lo, mperf_cur.split.hi);
> +	/*
> +	 * Get the old APERF/MPERF values for this cpu and pass it to
> +	 * acpi_get_pm_msrs_delta() which will read the current values
> +	 * and return the delta.
> +	 */
> +	aperf_old = &(per_cpu(cpufreq_old_aperf, smp_processor_id()));
> +	mperf_old = &(per_cpu(cpufreq_old_mperf, smp_processor_id()));
> 
> -	wrmsr(MSR_IA32_APERF, 0,0);
> -	wrmsr(MSR_IA32_MPERF, 0,0);
> +	acpi_get_pm_msrs_delta(&aperf_cur.whole, &mperf_cur.whole, 
> +				aperf_old, mperf_old, 1);
> 
>  #ifdef __i386__
>  	/*
> diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
> index 2ff21f3..5131e01 100644
> --- a/arch/x86/kernel/time_32.c
> +++ b/arch/x86/kernel/time_32.c
> @@ -32,10 +32,13 @@
>  #include <linux/interrupt.h>
>  #include <linux/time.h>
>  #include <linux/mca.h>
> +#include <linux/kernel_stat.h>
> 
>  #include <asm/arch_hooks.h>
>  #include <asm/hpet.h>
>  #include <asm/time.h>
> +#include <asm/processor.h>
> +#include <asm/cputime.h>
> 
>  #include "do_timer.h"
> 
> @@ -136,3 +139,171 @@ void __init time_init(void)
>  	tsc_init();
>  	late_time_init = choose_time_init();
>  }
> +
> +/*
> + * This function should be used to get the APERF/MPERF MSRS delta from the cpu.
> + * We let the individual users of this function store the old values of APERF
> + * and MPERF registers in per cpu variables. They pass these old values as 3rd
> + * and 4th arguments. 'reset' tells if the old values should be reset or not.
> + * Mostly, users of this function will like to reset the old values.
> + */
> +void acpi_get_pm_msrs_delta(u64 *aperf_delta, u64 *mperf_delta, u64 *aperf_old,
> +				u64 *mperf_old, int reset)
> +{
> +	union {
> +		struct {
> +			u32 lo;
> +			u32 hi;
> +		} split;
> +		u64 whole;
> +	} aperf_cur, mperf_cur;
> +	unsigned long flags;
> +
> +	/* Read current values of APERF and MPERF MSRs*/
> +	local_irq_save(flags);

Why do we need to do this? We've already disabled pre-emption in the caller?

> +	rdmsr(MSR_IA32_MPERF, mperf_cur.split.lo, mperf_cur.split.hi);
> +	rdmsr(MSR_IA32_APERF, aperf_cur.split.lo, aperf_cur.split.hi);
> +	local_irq_restore(flags);
> +
> +	/*
> +	 * If the new values are less than the previous values, there has
> +	 * been an overflow and both APERF and MPERF have been reset to
> +	 * zero. In this case consider absolute value as diff/delta.
> +	 * Note that we do not check for 'reset' here, since resetting here
> +	 * is no more optional and has to be done for values to make sense.
> +	 */
> +	if (unlikely((mperf_cur.whole <= *mperf_old) ||
> +			(aperf_cur.whole <= *aperf_old)))
> +	{
> +		*aperf_old = 0;
> +		*mperf_old = 0;
> +	}
> +
> +	/* Calculate the delta from the current and per cpu old values */
> +	*mperf_delta = mperf_cur.whole - *mperf_old;
> +	*aperf_delta = aperf_cur.whole - *aperf_old;
> +
> +	/* Set the per cpu variables to current readings */
> +	if (reset) {
> +		*mperf_old = mperf_cur.whole;
> +		*aperf_old = aperf_cur.whole;
> +	}
> +}
> +EXPORT_SYMBOL(acpi_get_pm_msrs_delta);
> +
> +
> +DEFINE_PER_CPU(u64, cputime_old_aperf);
> +DEFINE_PER_CPU(u64, cputime_old_mperf);
> +
> +DEFINE_PER_CPU(cputime_t, task_utime_old);
> +DEFINE_PER_CPU(cputime_t, task_stime_old);
> +

I fail to understand the per cpu variable for task_utime_old and task_stime_old?
What does it represent? Why is it global?


> +
> +#define CPUID_6_ECX_APERFMPERF_CAPABILITY	(0x1)
> +
> +static int cpu_supports_freq_scaling;
> +
> +/* Initialize scaled stat functions */
> +void scaled_stats_init(void)
> +{
> +	struct cpuinfo_x86 *c = &cpu_data(0);
> +
> +	/* Check for APERF/MPERF support in hardware */
> +	if (c->x86_vendor == X86_VENDOR_INTEL && c->cpuid_level >= 6) {
> +		unsigned int ecx;
> +		ecx = cpuid_ecx(6);
> +		if (ecx & CPUID_6_ECX_APERFMPERF_CAPABILITY)
> +			cpu_supports_freq_scaling = 1;
> +		else
> +			cpu_supports_freq_scaling = -1;
> +	}
> +}
> +	
> +/*
> + * Reset the old utime and stime (percpu) value to the new task
> + * that we are going to switch to.
> + */
> +void reset_for_scaled_stats(struct task_struct *tsk)
> +{
> +	u64 aperf_delta, mperf_delta;
> +	u64 *aperf_old, *mperf_old;
> +
> +	if (cpu_supports_freq_scaling < 0)
> +		return;
> +
> +	if(!cpu_supports_freq_scaling) {
> +		scaled_stats_init();
> +		if(cpu_supports_freq_scaling < 0)
> +			return;
> +	}
> +
> +	aperf_old = &(per_cpu(cputime_old_aperf, smp_processor_id()));
> +	mperf_old = &(per_cpu(cputime_old_mperf, smp_processor_id()));
> +	acpi_get_pm_msrs_delta(&aperf_delta, &mperf_delta, aperf_old,
> +				mperf_old, 1);
> +
> +	per_cpu(task_utime_old, smp_processor_id()) = tsk->utime;
> +	per_cpu(task_stime_old, smp_processor_id()) = tsk->stime;
> +}
> +

I hope this routine is called with preemption disabled

> +
> +/* Account scaled statistics for a task on context switch */
> +void account_scaled_stats(struct task_struct *tsk)
> +{
> +	u64 aperf_delta, mperf_delta;
> +	u64 *aperf_old, *mperf_old;
> +	cputime_t time;
> +	u64 time_msec;
> +	int readmsrs = 1;
> +
> +	if(!cpu_supports_freq_scaling)
> +		scaled_stats_init();
> +
> +	/*
> +	 * Get the old APERF/MPERF values for this cpu and pass it to
> +	 * acpi_get_pm_msrs_delta() which will read the current values
> +	 * and return the delta.
> +	 */
> +	aperf_old = &(per_cpu(cputime_old_aperf, smp_processor_id()));
> +	mperf_old = &(per_cpu(cputime_old_mperf, smp_processor_id()));
> +
> +	if (cputime_gt(tsk->utime, per_cpu(task_utime_old,
> +					   smp_processor_id()))) {
> +		acpi_get_pm_msrs_delta(&aperf_delta, &mperf_delta, aperf_old,
> +					mperf_old, 1);
> +		readmsrs = 0;
> +		time = cputime_sub(tsk->utime, per_cpu(task_utime_old,
> +							smp_processor_id()));
> +		time_msec = cputime_to_msecs(time);
> +		time_msec *= 1000; /* Scale it to hold fractional values */

What is 1000? The code is not clear

> +		if (cpu_supports_freq_scaling == 1) {
> +			time_msec *= aperf_delta;
> +			time_msec = div64_u64(time_msec, mperf_delta);
> +		}
> +		time = msecs_to_cputime(time_msec);
> +		account_user_time_scaled(tsk, time);
> +		per_cpu(task_utime_old, smp_processor_id()) = tsk->utime;
> +	}
> +
> +	if (cputime_gt(tsk->stime, per_cpu(task_stime_old,
> +					   smp_processor_id()))) {
> +		if (readmsrs)
> +			acpi_get_pm_msrs_delta(&aperf_delta, &mperf_delta,
> +						aperf_old, mperf_old, 1);
> +		time = cputime_sub(tsk->stime, per_cpu(task_stime_old,
> +							smp_processor_id()));
> +
> +		time_msec = cputime_to_msecs(time);
> +		time_msec *= 1000; /* Scale it to hold fractional values */
> +		if (cpu_supports_freq_scaling == 1) {
> +			time_msec *= aperf_delta;
> +			time_msec = div64_u64(time_msec, mperf_delta);
> +		}
> +		time = msecs_to_cputime(time_msec);
> +		account_system_time_scaled(tsk, time);
> +		per_cpu(task_stime_old, smp_processor_id()) = tsk->stime; 
> +	}
> +
> +}	
> +EXPORT_SYMBOL(account_scaled_stats);
> +
> 


-- 
	Warm Regards,
	Balbir Singh
	Linux Technology Center
	IBM, ISTL
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/