Re: [PATCH] Add support for HTC Shift Touchscreen

From: Pau Oliva Fora
Date: Mon May 19 2008 - 19:09:11 EST


From: Pau Oliva Fora <pau@xxxxxxxxxx>

The patch below adds support for HTC Shift UMPC touchscreen.

Signed-off-by: Pau Oliva Fora <pau@xxxxxxxxxx>

---

Patch against linux-2.6.25.4, should apply clean on other versions too.
Includes all the suggestions from Sam Ravnborg, Pekka Enberg,
Marcin Slusarz and Dmitry Torokhov. Thank you all for your help.

diff -uprN linux-2.6.25.4/drivers/input/touchscreen/htcpen.c linux/drivers/input/touchscreen/htcpen.c
--- linux-2.6.25.4/drivers/input/touchscreen/htcpen.c 1970-01-01 01:00:00.000000000 +0100
+++ linux/drivers/input/touchscreen/htcpen.c 2008-05-20 00:55:42.000000000 +0200
@@ -0,0 +1,196 @@
+/*
+ * HTC Shift touchscreen driver
+ *
+ * Copyright (C) 2008 Pau Oliva Fora <pof@xxxxxxxxxx>
+ *
+ * Thanks to:
+ * Heikki Linnakangas - Penmount LPC touchscreen driver
+ * Wacom / Ping Cheng - Help on linuxwacom-devel
+ * Esteve Espuna - Ideas, tips, moral support :)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/isa.h>
+
+MODULE_AUTHOR("Pau Oliva Fora <pau@xxxxxxxxxx>");
+MODULE_DESCRIPTION("HTC Shift touchscreen driver");
+MODULE_LICENSE("GPL");
+
+#define HTCPEN_PORT_IRQ_CLEAR 0x068
+#define HTCPEN_PORT_INIT 0x06c
+#define HTCPEN_PORT_INDEX 0x0250
+#define HTCPEN_PORT_DATA 0x0251
+#define HTCPEN_IRQ 3
+
+#define X_INDEX 3
+#define Y_INDEX 5
+#define TOUCH_INDEX 0xb
+#define LSB_XY_INDEX 0xc
+#define X_AXIS_MAX 2040
+#define Y_AXIS_MAX 2040
+#define DEVICE_ENABLE 0xa2
+
+static int invert_x;
+module_param(invert_x, bool, 0644);
+MODULE_PARM_DESC(invert_x, "If set, X axis is inverted");
+static int invert_y;
+module_param(invert_y, bool, 0644);
+MODULE_PARM_DESC(invert_y, "If set, Y axis is inverted");
+
+static irqreturn_t htcpen_interrupt(int irq, void *handle)
+{
+ struct input_dev *htcpen_dev = handle;
+ unsigned short x, y, xy;
+
+ /* 0=press ; 1=release */
+ outb_p(TOUCH_INDEX, HTCPEN_PORT_INDEX);
+
+ /* only update X/Y when screen is being touched */
+ if (inb_p(HTCPEN_PORT_DATA)) {
+ input_report_key(htcpen_dev, BTN_TOUCH, 0);
+ } else {
+ outb_p(X_INDEX, HTCPEN_PORT_INDEX);
+ x = inb_p(HTCPEN_PORT_DATA);
+
+ outb_p(Y_INDEX, HTCPEN_PORT_INDEX);
+ y = inb_p(HTCPEN_PORT_DATA);
+
+ outb_p(LSB_XY_INDEX, HTCPEN_PORT_INDEX);
+ xy = inb_p(HTCPEN_PORT_DATA);
+
+ /* get high resolution value of X and Y using LSB */
+ x = X_AXIS_MAX - ((x * 8) + ((xy >> 4) & 0xf));
+ y = (y * 8) + (xy & 0xf);
+ if (invert_x)
+ x = X_AXIS_MAX - x;
+ if (invert_y)
+ y = Y_AXIS_MAX - y;
+
+ input_report_key(htcpen_dev, BTN_TOUCH, 1);
+ input_report_abs(htcpen_dev, ABS_X, x);
+ input_report_abs(htcpen_dev, ABS_Y, y);
+ }
+
+ input_sync(htcpen_dev);
+
+ inb_p(HTCPEN_PORT_IRQ_CLEAR);
+
+ return IRQ_HANDLED;
+}
+
+static int htcpen_open(struct input_dev *dev)
+{
+ outb_p(DEVICE_ENABLE, HTCPEN_PORT_INIT);
+ return 0;
+}
+
+static void htcpen_close(struct input_dev *dev)
+{
+ free_irq(HTCPEN_IRQ, dev);
+}
+
+static int __devinit htcpen_isa_probe(struct device *dev, unsigned int id)
+{
+ int err;
+ struct input_dev *htcpen_dev;
+
+ printk(KERN_ERR "principi del prove\n");
+
+ inb_p(HTCPEN_PORT_IRQ_CLEAR);
+
+ htcpen_dev = input_allocate_device();
+ if (!htcpen_dev) {
+ printk(KERN_ERR "htcpen: can't allocate device\n");
+ err = -ENOMEM;
+ goto input_alloc_failed;
+ }
+
+ htcpen_dev->name = "HTC Pen TouchScreen";
+ htcpen_dev->id.bustype = BUS_ISA;
+
+ input_set_abs_params(htcpen_dev, ABS_X, 0, X_AXIS_MAX, 0, 0);
+ input_set_abs_params(htcpen_dev, ABS_Y, 0, Y_AXIS_MAX, 0, 0);
+
+ htcpen_dev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
+ htcpen_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ htcpen_dev->open = htcpen_open;
+ htcpen_dev->close = htcpen_close;
+
+ err = request_irq(HTCPEN_IRQ, htcpen_interrupt, 0, "htcpen",
+ htcpen_dev);
+ if (err) {
+ printk(KERN_ERR "htcpen: irq busy\n");
+ goto request_irq_failed;
+ }
+
+ err = input_register_device(htcpen_dev);
+ if (err)
+ goto input_register_failed;
+
+ dev_set_drvdata(dev, htcpen_dev);
+ return 0;
+
+ input_register_failed:
+ free_irq(HTCPEN_IRQ, htcpen_dev);
+ request_irq_failed:
+ input_free_device(htcpen_dev);
+ input_alloc_failed:
+ return err;
+}
+
+static int __devinit htcpen_isa_match(struct device *dev, unsigned int id)
+{
+ unsigned short val1, val2;
+
+ /* device detection */
+ outb_p(0x8, HTCPEN_PORT_INIT);
+ val1 = inb_p(HTCPEN_PORT_INIT);
+ val2 = inb_p(HTCPEN_PORT_IRQ_CLEAR);
+ if ((val1 > 0xc) || (val2 != 0x55)) {
+ printk(KERN_DEBUG "htcpen: no such device (%x|%x)\n",
+ val1, val2);
+ return 0;
+ }
+ return 1;
+}
+
+static int __devexit htcpen_isa_remove(struct device *dev, unsigned int id)
+{
+ input_unregister_device(dev_get_drvdata(dev));
+ dev_set_drvdata(dev, NULL);
+ return 0;
+}
+
+static struct isa_driver htcpen_isa_driver = {
+ .match = htcpen_isa_match,
+ .probe = htcpen_isa_probe,
+ .remove = __devexit_p(htcpen_isa_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "htcpen",
+ }
+};
+
+static int __init htcpen_isa_init(void)
+{
+ return isa_register_driver(&htcpen_isa_driver, 1);
+}
+
+static void __exit htcpen_isa_exit(void)
+{
+ isa_unregister_driver(&htcpen_isa_driver);
+}
+
+module_init(htcpen_isa_init);
+module_exit(htcpen_isa_exit);
diff -uprN linux-2.6.25.4/drivers/input/touchscreen/Kconfig linux/drivers/input/touchscreen/Kconfig
--- linux-2.6.25.4/drivers/input/touchscreen/Kconfig 2008-05-15 17:00:12.000000000 +0200
+++ linux/drivers/input/touchscreen/Kconfig 2008-05-19 15:48:52.000000000 +0200
@@ -134,6 +134,18 @@ config TOUCHSCREEN_HP7XX
To compile this driver as a module, choose M here: the
module will be called jornada720_ts.

+config TOUCHSCREEN_HTCPEN
+ tristate "HTC Shift X9500 touchscreen"
+ depends on ISA
+ help
+ Say Y here if you have an HTC Shift UMPC also known as HTC X9500
+ Clio / Shangrila and want to support the built-in touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called htcpen.
+
config TOUCHSCREEN_PENMOUNT
tristate "Penmount serial touchscreen"
select SERIO
diff -uprN linux-2.6.25.4/drivers/input/touchscreen/Makefile linux/drivers/input/touchscreen/Makefile
--- linux-2.6.25.4/drivers/input/touchscreen/Makefile 2008-05-15 17:00:12.000000000 +0200
+++ linux/drivers/input/touchscreen/Makefile 2008-05-17 03:10:12.000000000 +0200
@@ -14,6 +14,7 @@ obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtou
obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o
obj-$(CONFIG_TOUCHSCREEN_HP7XX) += jornada720_ts.o
+obj-$(CONFIG_TOUCHSCREEN_HTCPEN) += htcpen.o
obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o
obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
--- linux-2.6.25.4/MAINTAINERS 2008-05-15 17:00:12.000000000 +0200
+++ linux/MAINTAINERS 2008-05-19 15:40:11.000000000 +0200
@@ -1875,6 +1875,12 @@ M: mikulas@xxxxxxxxxxxxxxxxxxxxxxxx
W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
S: Maintained

+HTCPEN TOUCHSCREEN DRIVER
+P: Pau Oliva Fora
+M: pof@xxxxxxxxxx
+L: linux-input@xxxxxxxxxxxxxxx
+S: Maintained
+
HUGETLB FILESYSTEM
P: William Irwin
M: wli@xxxxxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/