Re: Possible error in tsc frequency calibration

[Thomas Gleixner]

On Tue, 13 May 2008, Alok Kataria wrote:
> I was looking at the tsc calibration code (tsc_calibrate) in the recent
> kernels (2.6.26-rc1). With the newer code of calibrating against the
> pm_timer and with the added checks for SMI's the tsc_calibration code
> looks pretty robust, at least for x86_64 systems.
> 
> However, from the code, (tsc_calibrate) SMI_THRESHOLD is 50000, so in
> the worst case, values returned by tsc_read_refs, i.e. tsc1 & tsc2,
> could be off by 50000 ticks. On a 2Ghz processor this would mean an
> error of 25us. The tsc frequency is calibrated over a period of 50ms;
> hence the worst case error can be around 500ppm. 
> 
> In addition to that, the pmtimer hardware itself has some drift,
> typically in the range of 20 to 100ppm.  If this drift happens to be in
> the same direction as the error in measuring the tsc against the
> pmtimer, we could have a total error of more than 500ppm in the tsc
> frequency calibration code.  The maximum drift that NTP is willing to
> correct is 500ppm.  So we can have cases when we may end up
> mis-calibrating tsc frequency beyond the NTP threshold.
> 
> One thing that we can do to reduce this possible error is to
> double the calibration period from the current 50msec to 100msec.
> This halves the maximum error to 250ppm. 

Will have a look at the threshold when working on #2
 
> Comments?
> 
> Now looking at the 32bit code, the frequency calibration code looks
> really broken in the sense that we are not checking for SMI's at all.  
> The maximum error that can go undetected on these systems is very high.
> The best way to solve this would be to unify the calibration code for 32
> bit and 64bit. Is anybody already working on this?

#2 Yup, I'm merging tsc-32/64 and keep the 64 bit calibration for both.

Thanks,
	tglx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/